Several instances of container, with PDB, located in the same House of Oracle?

Similar Questions

• Multiple instances of the APEX version share the same House of Oracle?

  Hello

  I'm working on the database oracle 11.2.0.2

  I have 2 instances DEV and PROD sharing the same oracle home.

  For the moment, the apex version is identical to 2 instances (4.2.1.00.08) and installed together with the embedded PL/SQL gateway.

  is there a potential problem for upgrade only version apex for the dev to 4.2.6 instance?

  concerning

  JM

  jmniard wrote:

  I'm working on the database oracle 11.2.0.2

  I have 2 instances DEV and PROD sharing the same oracle home.

  For the moment, the apex version is identical to 2 instances (4.2.1.00.08) and installed together with the embedded PL/SQL gateway.

  is there a potential problem for upgrade only version apex for the dev to 4.2.6 instance?

  An instance of the APEX using EPG exists entirely within the database once it is installed. External dependencies only would be on the scripts of utility provided with the installation media. Extract the installation files to the version files in a subfolder of the APEX of the ORACLE_HOME (apex/4.2.1, apex/4.2.6 etc.), to ensure you have access to the 4.2.1 and 4.2.6 install files so that should need you to execute a utility script (apxchpwd.sql for example) that you are running the correct for the involved database version.

• Combine data sources with different granularity in the same fact table?

  I have two operating tables 'Incident (157 columns)' and 'unit (70 Colums) '. For all the "incidents" happening there could be one or more records in the table of the 'unit '.
  
  As part of my design of data mart, I have merged the tables in one "makes the incident (227 columns)" and insert records from two tables with a join condition between them [incident. IN_NUM = Unit.IN_NUM].
  
  Is this correct, is my question? or am I mix data sources with different granularity in the same fact table. Appreciate your help.
  
  Best regards
  Bees

  Bees,
  Are the measures of the 'Incident', repeated during an incident given, in more than one record in the table of the unit? If so, then the sum (indicent.measure) will give an incorrect result?

  What is there to merge physically tables set outside OBIEE? With OBIEE you might have a table of 'facts' logic to present the user with report, which from tables separated units and Incidents and would stop the occurrence of incorrect aggregations. A common piece of modeling in the same way would be arrested in OBIEE headers and lines of command, quite common to have a logical fact 'orders' which contained the two header orders and order line, this translates into the Incidents-> relationship of units.

  To do what I mentioned, is relatively simple, you need a "Dim - Incident" at two levels, unit, mapp and Incident unique identifiers as keys to level and then use these levels to define the content of the levels correctly in your 2 tables logic sources logic "done", IE the LTS Incidents at incident level LTS units as level of units.

  Hope this helps, let us know if you get stuck.
  See you soon
  Alastair

• You can play with two players on the same conlsoe on modern war

  XXXXXXXXXXXXXX

  Hi Capcurt,

  Welcome to the Microsoft Answers site!

  You try to play the game live with 2 players on the same console?

  Unfortunately, you can not go online with two people on the same console. Modern Warfare 2 allows a user to sign in when you play in multiplayer.

  Modern Warfare 2 is a completely new game mode that supports 2-player cooperative play in single line of the solo campaign in history. To do this, you will need two machines.

  For better support, you can contact Xbox Forums.

  http://www.xbox360forum.com/Forum/

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When you add pictures to the Vista image folder it creates a folder HIDDEN of the same name with two copies of the same image inside

  I use Vista 32 bit. I started to see this problem when I recently copy photos from an SD card.

  When you add pictures to the Vista image folder it creates a folder HIDDEN of the same name with two copies of the same image inside

  I saw hidden files enabled in folder options.

  Any help is appreciated.

  Hey guys... I found the answer... Problem is with the software vaio content analyzer that comes with the vaio...

  It just search for Vaio Content Analyzer (parameters) and deselect
  
  Video analysis
  image analysis
  analysis of the music

  I went looking for this crazy thing... used almost all types of online scan, and finally to find that it is caused by an internal software only...
  anyway thanks to all... Hope it helps someone in the future :)

• share 'Start' content and presentation of the tile with multiple users on the same Tablet Windows RT

  Hello

  Can someone tell me if it is possible to share/copy the content start and the tile layout with multiple users on the same shelf?

  Hello

  Welcome to the Microsoft community.

  Unfortunately, you will not be able to share or copy the content start and available to tile with multiple users. However, you can rearrange the tiles and select the content to be displayed manually on each of the user accounts.

  See these articles for more details:

  Customize the splash screen

  http://Windows.Microsoft.com/en-in/Windows-8/start-screen#1TC=T1

  Reorganization of the tiles start

  http://Windows.Microsoft.com/en-in/Windows-8/rearrange-tiles-start

  I hope this helps. Let us know if you need more assistance.

• Is there an option in canvas to position a video on the stage? Be it an iframe to youtube or video file located on the same domain

  Is there an option in canvas to position a video on the stage? Whether an iframe to youtube or video file located on the same domain. I want to control the position of the video on the stage compared to other objects, which explains why the css is not ideal for the job.

  Already discussed here:

  How to load the video in Html5 Canvas?

  There is no native support in the Web for video documents. You float a tag of HTML5 video above the scene.

• Why I get two files with different names but the same image when I save in 2015 CC Photoshop?

  Why I get two files with different names but the same image when I save in 2015 CC Photoshop?

  Try resetting the PS preferences - Preferences in Photoshop

  ~ Rohit

• By creating a form that has several text boxes to a single character on the same line, how can I get the cursor to go in the next text box automatically after inserting a character?

  By creating a form that has several text boxes to a single character on the same line, how can I get the cursor to go in the next text box automatically after inserting a character?

  Create a text field and use the option 'comb n characters.

• I have a desktop version independent of PS6 - if I download some desktop PS CC application will be this result in all conflicts with both applications on the same desktop computer?

  I have a desktop version independent of PS6 - if I download some desktop PS CC application will be this result in all conflicts with both applications on the same desktop computer?

  Hello

  Yes both licenses will be in conflict and it will activate CS6 with creative cloud.

  You can only use a license on a computer and you can also download the previous version of the creative cloud.

  Concerning

  Gilles marneffe

• You can move a project to another location on the same hard drive?

  Hello!

  My project files in the htdocs of the Apache Server, however I recently had to install XAMPP and which meant a new copy of Apache placed in a different location on the same hard drive.     I would spend my projects in this same place.   Dreamweaver allows you to do this easily?

  It is an ideal location for the test on my Apache server.

  I could just move the files, but I don't know how Dreamweaver will react.

  Thanks for all your comments!

  ... John

  Absolutely,.

  Just move them to your regular Windows Explorer or anything on a Mac. Then change your site definition to point to the new location.

  Brad Lawryk

  Adobe Professional Community: Dreamweaver

  The Northern British Columbia Adobe user group: Manager

  Thompson Rivers University: Dreamweaver instructor

  My Blog from Adobe: http://blog.lawryk.com

• Restore the backup with a new name and a different location on the same server

  Hi all
  
  I did a complete backup of my current PROD. Is it possible to restore the database on the same server, but with a different instance name, db_name and on another location?

  PRM says:
  Hi all

  I did a complete backup of my current PROD. Is it possible to restore the database on the same server, but with a different instance name, db_name and on another location?

  If you use RMAN my awnser is not.

  You cannot change the name of the database before open resetlog.

  But you can make this work without problem using the same server.

  You will need to change some parameters.

  Create a PFILE from SPFILE (prod) change parameter 'db_unique_name' file new name (ex TEST).

  Change all the value of PROD TEST except db_name parameter must be PROD.

  CREATE a SPFILE from this PFILE (spfileTEST.ora)
  Create a new password file (orapwTEST)

  So you can start this new Instance_name (TEST).

  Restore the PROD to TEST instance database, you will need use set new name to the file data or database (depends on which version you use)

  Retrieve the instance PROD database (TEST)

  It is time to open resetlogs...
  !!!!!!!!!!!!!!!!!!!!!!!!!!!! ATTENTION HERE!

  You need change redo log location before open resetlogs, you must query v$ logfile member column and change it to another location.

  After change you can open resetlog.

  Now its time to change name of database.

  Stop and start Mount

  Use the NEST

  NEST target=sys/password@instance DBNAME = TEST

  When this process is complete, NEST will be closing database.

  So you will need to start with nmount change db_name to the TEST and reset the parameter 'db_unique_name' (alter system reset db_unique_name)

  Then stop and start upstairs question OPEN DATABASE RESETLOGS and is done.

  HTH,
  Levi Pereira

  Published by: Levi Pereira on August 27, 2012 13:09

• Lightroom CC - edition in the external editor with images located on the external hard drive problems

  I have recently moved most of my image containing folders on external hard drive. In general, everything works smoothly in Lightroom (running latest CC). However, if I try to use an external editor of in Lightroom, I managed opening image in Photoshop CC if it is chosen. However, if I try to edit in a NIK Collection programs (i.e. Viveza 2) or affinity Photo I get error messages. The copy of Tiff is generated within lightroom, but at the spearhead of the external editor the following messages are met...

  • Viveza 2 - 'News file. Plist could not be opened"
  • Photo of affinity - "'could not open the file - / Volumes/4Tb iMac/2015-10-20-202036/Macintosh of the castle of my book 2 Backup/Backups.backupdb/Neil HD/Applications/Adobe Illustrator CS5/Plug-ins.localized/Photoshop Filters.localized/Unsharp Mask.aip/Contents/Resources/he.lproj/InfoPlist.strings the file type is not supported.". " My external backup drive is " " " 4 TB my book 2 backup" but my images are on an external drive called "4 TB My Book 1" ".

  However, if I move the folders containing images of problem on my desktop (iMAC 27 2015) in Lightroom external editor command change... works very well. The images open with Nik Collection and Photo of affinity and save in Lightroom when save. Everyone knows about this problem? And if you have, is there a resolution?

  
  

  Any help/advice greatly appreciated.
  

  Neil

  Looks like I solved my problem with Lightroom. I disassembled my external backup drive, but upheld the disk external drive containing the photos up and then restarted my mac. After the reboot, I open Lightroom and chose the image on an external drive for mounting in affinity Photo and Collection of Nik. Both image successfully opened in editors. I reassembled the backup drive and rebooted time machine and repeated the same opening picture in external editors. Once again, works great. Have no idea where the original problem. Looks like a bad path was stored in a config somewhere file.

• Is it possible to have several buttons send grouped with different fields in the subforms on a single page?

  Hello world

  I have a form with two sections. Each section is a subform (the green boxes represent subforms in the screenshot) and each subform contains three required fields and a release button (the button submit to an e-mail address). The problem is that I can't seem to keep them separate. If I fill in the fields required in Subform1 and then click on the button 'Submit to regional HR', he took over the fields required in the subform 2. Is there a way to 'point' or 'group' these fields to each Submit button in their respective subforms?

  I can not be understanding the appropriate function or expects subform correctly. I learned designer of the life cycle on my own and with the help of this forum. Thank you very much for your help. -Chris

  

  I'm an amateur, but I decided to start helping as much as possible on these forums.

  I had a similar problem in the past and found a solution. I can't say with certainty that it is the best solution, but since each button has only 3 mandatory fields, it's a workable solution.

  So this is complicated but also somewhat simple solution that works. Please keep in mind my script experience is limited.

  For the first submit button allow the script to remain in its natural state. Make sure that your email presentation is correct. You will create a second button which will be a standard button. Change the text to be the same as the text for the first submit button. Within this button, the click event, puts a script like this.

  (

  If

  Required.Field.1.rawValue == null or

  Required.FIeld.2.rawValue == null or

  Required.FIeld.3.rawValue is nothing

  then

  xfa.host.messageBox = ("If you please fill all required fields")

  on the other

  Submit.Button.execEvent ("mouseUp")

  endif

  Repeat this step for the second button on the subform.

  now do the real hidden submit button and place the second button in its place. He will check the required fields have entered values and if they entered it will be then press the button to send real otherwise it will put in place the error message. This method requires that the mandatory fields are not marked as required by the value tab. They must be optional, if not built in scripts will interfere with the written order. This is a work around, but I found that it allows better control of the required fields. You can add a floating asterisk or perhaps a border coloured fields so that users are aware of what fields are mandatory.

  I really hope this helps. I know this can be confusing, but I understand that sometimes it can be difficult to get a response, so if I can be useful, I'll try.

• Multiple instances of oracle with characterset different on the same server database

  Hello

  We are finalizing plans to install Automic (software scheduliong formerly UC4) for our suite of retail applications and replace Uc4.

  The process came to know that Automic does not support AL32UTF8 database characterset.

  At this moment we have RMS and UC4 UC4 supports AL32UTF8 and schema for UC4 running on the same database server is inside the RMS database.

  From now on, it is recommended to have a separate database instance on the same server as the RMS database and with a different characterset which is WE8MSWIN1252.

  Is it possible to have 2 instances of database running with different charactersets, one with AL32UTF8 and the other with WE8MSWIN1252. ?

  There are configuration requirements before implementing instances of database?  THS APPWORX (for UC4) schema will be exported (data pump export) and imported into the new database.

  The utility Automic we want to use is not compatible AL32UTF8 and manage only a database of character set WE8MSWIN1252.

  Any help and advice would be much appreciated.

  Thank you

  RAM.

  PL post OS and database versions.

  Is it possible to have 2 instances of database running with different charactersets, one with AL32UTF8 and the other with WE8MSWIN1252. ?

  Yes - without any doubt - two databases are independent and have nothing to do with each other.

  There are configuration requirements before implementing instances of database?  THS APPWORX (for UC4) schema will be exported (data pump export) and imported into the new database.

  You may have - to test the export/import process rigorously. If your source is AL32UTF8 and target is WE8MSWIN1252, data loss may occur for those characters that are in the former, but not the last.

  HTH
  Srini