Several interfaces of vmkernal with different gateways?

Similar Questions

• Is it possible to have several buttons send grouped with different fields in the subforms on a single page?

  Hello world

  I have a form with two sections. Each section is a subform (the green boxes represent subforms in the screenshot) and each subform contains three required fields and a release button (the button submit to an e-mail address). The problem is that I can't seem to keep them separate. If I fill in the fields required in Subform1 and then click on the button 'Submit to regional HR', he took over the fields required in the subform 2. Is there a way to 'point' or 'group' these fields to each Submit button in their respective subforms?

  I can not be understanding the appropriate function or expects subform correctly. I learned designer of the life cycle on my own and with the help of this forum. Thank you very much for your help. -Chris

  

  I'm an amateur, but I decided to start helping as much as possible on these forums.

  I had a similar problem in the past and found a solution. I can't say with certainty that it is the best solution, but since each button has only 3 mandatory fields, it's a workable solution.

  So this is complicated but also somewhat simple solution that works. Please keep in mind my script experience is limited.

  For the first submit button allow the script to remain in its natural state. Make sure that your email presentation is correct. You will create a second button which will be a standard button. Change the text to be the same as the text for the first submit button. Within this button, the click event, puts a script like this.

  (

  If

  Required.Field.1.rawValue == null or

  Required.FIeld.2.rawValue == null or

  Required.FIeld.3.rawValue is nothing

  then

  xfa.host.messageBox = ("If you please fill all required fields")

  on the other

  Submit.Button.execEvent ("mouseUp")

  endif

  Repeat this step for the second button on the subform.

  now do the real hidden submit button and place the second button in its place. He will check the required fields have entered values and if they entered it will be then press the button to send real otherwise it will put in place the error message. This method requires that the mandatory fields are not marked as required by the value tab. They must be optional, if not built in scripts will interfere with the written order. This is a work around, but I found that it allows better control of the required fields. You can add a floating asterisk or perhaps a border coloured fields so that users are aware of what fields are mandatory.

  I really hope this helps. I know this can be confusing, but I understand that sometimes it can be difficult to get a response, so if I can be useful, I'll try.

• Several panels reducible Spry with different default values for open - close

  Hello

  The site I'm trying have a page with (5) folding panels Spry. (4) are by default open, (1) is set by default closed.

  I'm trying to get (3) open and (2) closed. However, defining a second flaw of closed panels give a syntax error.

  Someone knows how to operate, if possible at all?

  

  Remove the parenthesis after "CollapsiblePanel5". It should be like this:

  var CollapsiblePanel5 = new Spry.Widget.CollapsiblePanel ("CollapsiblePanel5", {contentIsOpen: false});

• Several VLANs with multiple gateways

  Hello.

  Got a SF500 in Layer 3 mode, 5 VLANS air conditioned and have their own subnet.

  VLAN 10 = 192.168.10.0/24

  VLAN 100 = 192.168.100.0/24

  VLAN 200 = 192.168.200.0/24

  VLAN 201 = 192.168.201.0/24

  VLAN 202 = 192.168.202.0/24

  We have a gateway on Vlan 10 (192.168.10.1), which all VLANS can see & access (because of intervlan routing), and this currently allows for vlan 10 for access to the internet.

  I want to vlan 100 to be able to access the internet through this gateway, although other VLAN (200,201,202), uses a different gateway located on the vlan 200 subnet.

  Of course, the gateway must be in the subnet.  I can't assign the default gateway of a machine on vlan 100, the gateway ip address on vlan 10.

  If I point the virtual interface default gateway in its subnet (for example, 192.168.100.254), he also does not know how to get to the internet, even if she can see the entry door (I can access a web page it hosts).

  So the question is this:

  Traffic 100 VLANs can be routed on the SF500 to use the gateway on the vlan 10? (outside the default gateway of the switch).

  If this is not possible with the SF500, what do I need to make it work?

  Thank you very much.

  Hi André,.

  I understand what you want to achieve, so in your case, we need a switch with PBR (policy based routing) capacity that allow to match the IP source address and action hope then the IP address of the gateway.

  This feature is not implemented in SMB product, but for devices of the company, we have this feature as Catalyst 3750

  Please note or marked as replied to help other customers of Cisco

  Greetings

  Mehdi

• How to set up multiple LIVE IDS prod certificates on Sharepoint 2010 single server runs several Sharepoint Sites with different domain on port 443?

  Hello

  I integrated LIVE ID with Sharepoint 2010 and got the same compliance.

  In sharepoint server 2010, several sharepoint sites are run under port 443 with different domain names.

  I configured 1 LIVE ID certificate for one of our sharepoint sites would like to know can I use the same certificate for other sites too or I need to install other certificates LIVE ID to access other sites.

  How can I get prod LIVE ID certificates are available for free as nexus offers two certificates INT and PROD (x 509 certificate) or do I need to buy.

  If I need to buy where can I buy it go?

  Hi ppdremsadm,
   

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums as it is related to the configuration of Live ID in Sharepoint 2010. It should be better in the Forums of Windows Sharepoint.

  Please ask your question in products and technology SharePoint forums to improve assistance in this regard.

• syslogging to 2 host with different levels of severity?

  I have a PIX that sends the logs to a host with Cisco syslog installed. It is configured to send messages of level 3 (as required by the internal standards) of gravity.

  I have another host which collects the theses papers too, but I want some info - level 5 or 6.

  ? is it possible to config the PIX to send logs on 2 different hosts with different levels of severity?

  you configure the pix to send to 7 on a syslog server. configure you this server to send events to the level 3 to another server. I think that it should be possible

• Export of several video tracks in 1 file with different effects on each track.

  I'm currently trying to export 3 MP4 1 video tracks.

  Each track contains exactly the same images, but with different effects for a certain aesthetic.

  When I view the sequence he first that 3 of all titles is displayed correctly.

  The exported version only seems to export the Summit track, Track3.

  Track 2 and 3 have opacity at 47%.

  Track 1 opacity is set to 100%.

  I tried to export a test project that has several layers, and it was no problem.

  I have tried exporting a test project with exactly the same opacities and effects, as it is a little of your time. So I will do if I can't get a solution of stisafctory in the forums.

  The problem, in my view, is the superposition of the effects. In this case on track 3 I have procamp, which reinforces the red in 1 layer. This is the image I get once the last piece is exported - track 3.

  Then.

  How can I get the effects of each layer to display correctly export?

  and

  Why the exported version missing securities (or the effects of the tracks) 1 and 2?

  Need to know:

  • The layer source footage
  • Effects that you use
  • How you have the sequence in place, for example how are extracted and stacked effects
  • Hardware or software MPE
  • Maximum bit depth: on or off
  • Maximum render quality: on or off
  • Destination format

  Let's start there.

• Several analog inputs with different configuration differential/CSR

  Hello

  Can anyone tell how to measure two analog inputs with different configurations using a USB-6009?
  I am aware of the syntax for create virtual channels for the channels DAQmx create virtual so I created two strings using Dev3 / ai0:1 but I would like the first string of the CSR and the second to be differential.
  So far I have found no way to specify the configuration of the separate channels.

  Any ideas much appreciated!

  Jack

  JackT wrote:

  I prefer to use the 'low' level vi is therefore always curious to know if there is a way to set the configuration using the their.

  It should be like this:

  

• Several channels with different frequencies

  Hello

  I use card NI USB-6221.

  The C API using, I need to generate 6 digital output channels, with frequencies of diffrenet and Heavy duty.

  To be more precise, the 2 are totally identical, but I need them to be reversed, and the other 4 are similar to another, but should be shifted in time (I.e. There is a delay between each of the channels).

  I used the 2 channels of CO that the USB-6221 takes charge for the first two signals, and it works very well (the two signals are synchronized and are reversed).

  Now I need an additional 4 channels for the other vague square.

  I saw an articale NOR by JohnP web site with the title:

  Generate multiple channels of digital output with different frequencies and Heavy Duty

  The following example shows how to create and generate a digital with the non-regeneration wave form so that you can change the frequency and the duty cycle on the fly with the M Series DAQ hardware X.  The example uses output digital rather than counters to achieve this, so if you need more output than the available counters, it would be a good option (Note: on the materials of the M series an external sample clock must be provided, this may be caused by one of the counters if you want).

  that seems to be exactly what I need, but the examples are for LabView which I did not.

  Can someone explain how to do this with the C functions?

  Best regards

  Danny.

  Hey Danny,

  The important thing to note is that you can clock of arbitrary digital waveform (up to 1 MHz on the 6221).  The real data acquisition programming is pretty easy once you have the waveform.  My Example LV used LabVIEW Base generating function VIand then converted to a digital waveform to generate the signal from each channel.

  The functions of LV helped tremendously with to achieve the waveforms to be updated on the fly (the basic function generator keeps track of phase for you).

  If you do not need to be updated on the fly, then the construction of the waveform in C should not be too bad.  For example:

  P0.0 [1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0] * 1

  P0.1 [0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0] * 2

  P0.2 [0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1] * 4

  P0.3 [1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1] * 8

  [9 9 9 9 9 3 3 3 3 3 6 6 6 6 6 12 12 12 12 12]

  The table above U8 would give you 4 output waveform of 50% duty cycle at Fs/20, shifted 90 degrees to eachother.  The lines would be p0.0 by p0.3 (the bit rate of the U8 corresponds to what line goes high).

  Best regards

• I want to clone my hard drive and this clone allows you to configure a new computer, how do I do this for several PCs with different versions of XP?

  I am trying to replace 15 PCs.  They all have XP because their BONES, bought with different SPs at different times.  They all have been updated to SP3...  They have all MS 2003, upgaded to MS 2007.  I would use a clone as image.  I do not support different key codes?  Although the XP are authentic, I may not all key codes.  My predessor has not keep good records, and stickers on some had labels of Vista.  Even if the PC was bought with XP downgrade.  I need to use XP because of some other software requirements.

  What is the best way to represent all the PC so that I can get back them to my users?

  Hello

  I suggest you to refer to this link and check if it helps:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_install/cloning-Windows-XP-Pro-to-new-hard-drives-ready-to/b7edf501-6ae6-4bc1-94BB-39a4177d8b71

  It will be useful.

• Updated several lines with different values

  Hello!
  I have a problem. I need to update more than 1000 lines with different values. How can I do?
  For exsample I have table:
  ID; color, date,
  1 red
  2 green
  3 white
  
  I need to update the date field.
  
  Update table
  Set date = '01.02.03'
  where id = 1
  
  Update table
  Set date = '01.03.03'
  where id = 2
  
  
  Maybe it's how to update multiple rows in a single request?
  
  Sorry for my bad English.
  Thank you!

  Hello

  You can try this

  UPDATE TABLE SET DATE = CASE
                      WHEN ID = 1 THEN TO_DATE('01-02-03','DD-MM-RR')
                      WHEN ID = 2 THEN TO_DATE('01-03-03','DD-MM-RR')
                      END
  

  see you soon

  VT

• Deployment of a program to clients with different hardware

  Hi all

  I have a general problem with the customers with different hardware. I would appreciate any advice on the subject.

  For example, I have two clients with two different cameras. I wrote a module-oriented camera the camera parent object and children Camera1 and camera2, so that the same logic works for both cameras. I want to deploy the program to clients, but so he could work for two clients, I need to install the drivers of the two cameras at two customers. Is there a way to keep the object oriented and modular code without installing all the drivers of material possible to all customers?

  In the case of two cameras, this isn't a big deal, but my program is more complicated than that and it will interface with dozens of spectrometers, cameras and scanners. I don't want to install each client drivers for all configurations possible. Is there a way to get around this?

  Thank you

  Danielle

  Another alternative would be to use a plugin architecture for your specific items to the customer. Create a Setup program for your application and a camera specific driver for the plugin. Each plugin will be specific to a type of camera-specific and includes the appropriate drivers. Of course this requires your customers to use 2 installers but only the appropriate drivers will be installed. You might be able to pack as a single installer that runs the camera installation after the installation of the application program. Your actual installer would all compatible drivers, but the user will be prompted for which device they use.

• acquisition of data with different sampling rates high

  I have a few questions on the use of the OMB-DAQ-3005 with different sampling rates high.

  For our application, we have 8 analog inputs. Which two are a quick response and should be sampled frequently.  We have an encoder quadrature (CPR 1000 running at 1800 rpm).  We plan to sample X 4 encoder.  For the analog inputs for the quick response, we want to trigger a sample of each pulse or each a few pulses, thus creating a timestamp with the position of the encoder with respect to position index as well as two fast analog inputs.  We have data correlating the analog inputs with the position of the encoder.   Other analog inputs, we want to measure relatively slowly (for example once every 5 dry or similar).

  How can I go on the configuration of the two (or more) sampling rates different wherein I can taste entered at different frequencies?  Also, is there a way to reset the encoder count after outbreak of the index as I have the position of the encoder with respect to the index?

  Maybe you'll find someone here who uses the OMB-DAQ-3005, but this forum is really more designed for LabVIEW programming issues.

  I've never used the OMB-DAQ-3005, but out of curiosity, I took a glance at the Manual of OMB-DAQ-3005.  The answer to both your questions are:

  1. you cannot run a hardware DQA Multiplex (like this one) at independent rates by channel.

  2. the OMB-DAQ-3005 supports an Index Z feature to reset the counter - look for documentation on how to configure any software interface you are using.  If you get stuck, you can try to discover media appropriate for instrument channel.

  Best regards

• How to read the data with different XML schemas within the unique connection?

  • I have Oracle database 11g
  • I access it via JDBC: Slim, version 11.2.0.3, same as xdb.
  • I have several tables, each has an XMLType column, all based on patterns.
  • There are three XML schemas different registered in the DB
  • Maybe I need to read the XML data in multiple tables.
  • If all the XMLTypes have the same XML schema, there is no problem,
  • If patterns are different, the second reading will throw BindXMLException.
  • If I reset the connection between the readings of the XMLType column with different schemas, it works.

  The question is: How can I configure the driver, or the connection to be able to read the data with different XML schemas without resetting the connection (which is expensive).

  Code to get data from XMLType is the implementation of case study:

   1   ResultSet resultSet = statement.executeQuery( sql ) ; 
   2   String result = null ; 
   3    while(resultSet.next()) { 
   4   SQLXML sqlxml = resultSet.getSQLXML(1) ; 
   5   result = sqlxml.getString() ; 
   6   sqlxml.free(); 
   7   } 
   8   resultSet.close(); 
   9    return result ; 
  

  It turns out, that I needed to serialize the XML on the server and read it as BLOB. Like this:

   1    final Statement statement = connection.createStatement() ;  2    final String sql = String.format("select xmlserialize(content xml_content_column as blob encoding 'UTF-8') from %s where key='%s'", table, key ) ;  3   ResultSet resultSet = statement.executeQuery( sql ) ;  4   String result = null ;  5    while(resultSet.next()) {  6   Blob blob = resultSet.getBlob( 1 );  7   InputStream inputStream = blob.getBinaryStream();  8   result = new Scanner( inputStream ).useDelimiter( "\\A" ).next();  9   inputStream.close(); 10   blob.free(); 11   } 12   resultSet.close(); 13   statement.close(); 14  15   System.out.println( result ); 16    return result ; 17
  

  Then it works. Still, can't get it work with XMLType in resultset. On the customer XML unwrapping explodes trying to pass to another XML schema. JDBC/XDB problem?

• Transfer values of ROWTYPE in ROWTYPE with different COLUMN specifications. keeping the Default_Data values

  Hello

  I have a problem on dynamically the transfer values of different columns in two variables given rowtype type.

  My intention is to transfer values from table1 into table2.

  Basically, I stated to vars of v_table1 and v_table2% rowtype, each of them contains columns with the same, and also the individual column names.

  v_table2% rowtype must be initialized with default values.

  I would like to insert v_table2 values in table2 later by practice 'INSERT INTO TABLE2 VALUES v_table2'.

  Before inserting, I need to change several values of column by different rules, but these rules are not relevant for my actual demand.

  The point is, how can I transfer the values of v_table1 in v_table2 for the hanving of columns with the same column name, without hard-coding the names of columns, because these two tables contain many columns.

  In addition values initialized with v_table2 default_data values should not be overwritten by data does not exist in the same named column of v_table1.

  Example: If v_table1. D is NULL, it should not replace the default value initialized former "Monday".

  Conditions:

  Table 1 contains the following values:

  Column name	Value
  A	'1'
  B	'2'
  C	NULL VALUE
  D	'somedata '.
  E	NULL VALUE
  F	« 3 »

  After the transfer of the values of v_table1 in v_table2, I guess that the following data:

  Column name	Value	Source
  C	NULL VALUE	Table1.C
  D	'somedata '.	Table1.D
  E	"Tuesday".	DATA_DEFAULT from Table2
  F	« 3 »	Table1.F
  G	NULL VALUE
  H	NULL VALUE

  Right now I am already able to fill the v_table2 with the default values:

  declare
    lv_query varchar2(1000);
    
    type cur_typ is ref cursor;
    rcur_typ cur_typ;
    
    v_table2 table2%rowtype;
  
  begin
      for rec in (select *
                  from user_tab_columns
                  where table_name = 'TABLE2'
                  order by column_id
                  )
      loop
        if rec.data_default is null then
            lv_query := lv_query||', null';
          elsif rec.data_type = 'NUMBER' then
            lv_query := lv_query||', '||rec.data_default;
          elsif rec.data_type = 'DATE' then
            lv_query := lv_query||', '||rec.data_default;
          else
            lv_query := lv_query||', '||rec.data_default||'';
        end if;
      end loop;
      
      lv_query := 'SELECT'||substr(lv_query, 2)||' FROM DUAL';
      dbms_output.put_line(lv_query);
      
      open rcur_typ for lv_query;
      fetch rcur_typ into v_table2;
      close rcur_typ;
  end;
  

  I have no idea how to achieve the transfer of v_table1 to v_table2 without substitute default values of table2.

  
  

  As far as I know I can find these columns with column names by querying:

  select column_name from user_tab_cols where table_name='TABLE1' intersect select column_name from user_tab_cols where table_name='TABLE2'
  

  Maybe you can give me some advice.

  Thank you very much.

  Sample data:

  CREATE TABLE "TABLE1" 
     (    "A" VARCHAR2(20 BYTE), 
      "B" VARCHAR2(20 BYTE), 
      "C" VARCHAR2(20 BYTE), 
      "D" VARCHAR2(20 BYTE), 
      "E" VARCHAR2(20 BYTE), 
      "F" VARCHAR2(20 BYTE)
     );
  
    CREATE TABLE "TABLE2" 
     (    "C" VARCHAR2(20 BYTE), 
      "D" VARCHAR2(20 BYTE) DEFAULT 'Monday', 
      "E" VARCHAR2(20 BYTE) DEFAULT 'Tuesday', 
      "F" VARCHAR2(20 BYTE) DEFAULT 'Wednesday', 
      "G" VARCHAR2(20 BYTE) DEFAULT 'Thursday', 
      "H" VARCHAR2(20 BYTE)
     );
  
  INSERT INTO "TABLE1" (A, B, D, F) VALUES ('1', '2', 'somedata', '3');
  
  INSERT INTO "TABLE1" (A, B, D, F) VALUES ('1', '2', 'somedata', '3');
  

  Banner:

  Oracle Database 11 g Release 11.2.0.3.0 - 64 bit Production

  PL/SQL Release 11.2.0.3.0 - Production

  CORE Production 11.2.0.3.0

  AMT for Linux: Version 11.2.0.3.0 - Production

  NLSRTL Version 11.2.0.3.0 - Production

  You can build a dynamic query that checks the values of all columns in the table 1,

  and if a column contains null, then retrieves the default value of the column in table2,

  or null if this column doesn't have a default vallue.

  Something like this pseudocode

  SELECT
     if column A is not null then take A from table1, else take default for column A from table2
     .....
     if column X is not null then take A from table1, else take default for column X from table2
  FROM table1
  

  The default budget can be extracted from USER_TAB_COLUMNS

  select column_name, data_default from user_tab_columns
  where table_name = 'TABLE2'
  order by column_id
  ;