several scenes does not not on any computer except my own.

Similar Questions

• Windows 7 does not recognize any keyboard, except the v1.0 of MS natural ergonomic Keyboard 4000 defective

  I have a very strange problem.

  I have a desktop computer Windows 7 64-bit edition, all of a sudden about a third of the keys on my Microsoft Keyboard stops working.

  So, I bought a new generic keyboard.

  The problem

  1. If I plug the natural ergonomics MS Keyboard 4000 v1.0-it recognizes the keyboard, BUT it does not recognize one of the buttons on the left and right of the keyboard.

  2. If I plug any USB keyboard or a Bluetooth keyboard on it - it does not recognize.

  However, the Bureau will recognize any wired (USB) or mouse wireless (bluetooth) connected.

  It baffles me that the bureau will recognize a usb or bluetooth mouse mouse - but that it will not recognize the bluetooth keyboard or a usb keyboard.

  I tried many things

  1. connect the USB and Bluetooth keyboards in my laptop and check that they work properly. -They are.

  2. I tried using different USB ports on the desktop. He has not made a difference.

  3. my computer allows you to access its bios using F8 - I checked that my material was grateful the Generic USB keyboard before loading Windows. (I could select F8 and bring up the desktop in mode of Bios Configuration).

  4. I tried to start Windows in safe mode. That did not help at all.

  Any help would be greatly appreciated.

  Hello Pauliw,

  Please provide detailed information about your question. I appreciate the step by step troubleshooting, and pain that you have taken to resolve your problem. However, there are a few steps more that we can try to diagnose the root cause in order to solve the problem permanently.

  You can try the steps in the following Microsoft article and see if it works for you.

  Troubleshoot keyboard

  Note: There is place for Windows 7 also.

  Troubleshoot the incidents of the response to the mouse or wireless keyboard

  If the problem persists, try to remove all of the ghosts of your computer devices and then try to use the device. You can see the steps below.

  1. Click Start

  2. In the Search box, type command prompt .

  3. In the list right click on command prompt and select run as administrator.

  4. At a command prompt, type the following command and press ENTER:
     Set devmgr_show_nonpresent_devices = 1

  5. IN the following line from the command prompt, type the following command and press ENTER:
     Start devmgmt.msc.

  6. When the Device Manager opens, click on view

  7. Now, click Show hidden devices.

  8. Remove all the entries that exist for the keyboard and the USB category.

  9. Close Device Manager , and then restart your computer.

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Thank you.

• See connection to the server does not see any source

  Hello

  I have a very big problem, my opinion-connection to the server does not see any computer desk-source. I had seen some sources but not all a few hours ago. At this point, I did not see the sources I so did many trys to see this source. Overall I don't have luck, and now I see no source.

  The problems started with a VM Windows Server 2003 EE SP2, I need training to be deployed with a view. I have not seen this virtual machine, either I chosse linked clones or not.

  The journal of the events of this virtual machine show, auto login TP Server service not started right.

  I hope to have some ideas that will help me to solve this problem.

  Greetings

  You can use a server OS in a pool of Terminal Server services.  If you want to set up a desktop computer, you will need to use a desktop supported OS.   You can find operating systems supported in the Administrator's guide, http://www.vmware.com/pdf/view31_manual.pdf.

  If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

• Windows XP does not detect any internet at all despite the computer with the modem to work.

  I recently installed Windows XP Professional on my new iMac via bootcamp.  While Windows itself works fine, it won't connect to internet at all.  Despite being connected to a modem ADSL via a Ethernet cable, and also have wireless internet, Windows does not detect any signal.  On the internet in the Control Panel, all connections page that appears is "1394 connection" under the heading "LAN or Internet high speed."  I tried several times to put in place a new internet connection through the Setup Wizard and everytime, no internet is detected.

  I know that the modem works because all the other computers in my house are fine online, including on the side of Mac of the iMac.  If anyone has an idea as to how I should resolve this problem, your help would be greatly appreciated!

  Thank you

  Daniel

  Moreover, these are things I've already tried:

  I've tried to manually and automatically set up an internet connection
  I spoke with my ISP, the modem works fine
  I have re-partitioned the hard drive and reinstalled XP

  The "1394 connection" is the IEEE 1394 (FireWire) from your computer.  There should be cable system and under the heading wireless connections "LAN or Internet high speed."   There is no need to run the Network Setup Wizard or set up a new connection.

  Open the Device Manager (Start > run > devmgmt.msc ) and go to the network adapters section.  You may need to install the drivers for them.

• Why am I selling a total of 41 pounds (various titles) in November through Kindle, but not one through iBooks? I don't promote either, and I don't know that there are several iPads out there than Kindle. Apple does not have any promotion?

  Why am I selling a total of 41 pounds (various titles) in November through Kindle, but not one through iBooks? I don't promote either, and I don't know that there are several iPads out there than Kindle. Apple does not have any promotion?

  Why are you asking? It's between you and Apple.

• WinXP Pro 2008 does not recognize my computer drivers & load the standard drivers 2001

  WinXP Pro 2008 does not recognize my computer drivers & load the drivers of standard system of 2001; Impossible to upgrade

  then load systemroot, I don't want systemroot, also charges 3.1 drivers, 95, 98. 2000 & winnt 3, 4, 5 &

  Sometimes it runs under DOS only & sometimes not

  I don't want to network & sharing, because there's someone attached to my system & load malware {pirate just deleted} & takes control so I'm at work & then interupts me online with flash & js causing anomalies onscreen, resumes also connection & homepage.

  Now my Norton is denied access (& other programs) & I can't use it

  Suffered disc & reworked several times, I tried the sharding & partitioning is not on all COMPUTERS

  This pirate has done this for 12 years, 7 computers & 5 operating systems.

  SOMETIMES HE TAKES CONTROL OF MOUSE & KEYBORD. YOU SHOULD SEE MY CDROM CONTROL CD ABNORMALLY.

  This is clearly abuse & I am at my wits end! Help me get rid of this danger, please

  but hidden.
  Try this, go to disk management (Control Panel, administrative tools, computer management).
  They appear here? If so, you may need to reassign a drive letter for them.

  If not, look in Device Manager, they appear in red/yellow or is there any "unknown devices"?

  Windows cannot have the drivers either, so you can download the drivers from the manufacturers Web site.

  1. start the computer.
  2. press F8 repeatedly to display the start menu.
  3. Select safe mode in the start menu.
  4. right - click on "my computer".
  5. Select Properties.
  6 select the Hardware tab.
  7. click on the button "Device Manager."
  8. click on the (+) plus sign next to CD/DVD players.
  9. right click on each component and select uninstall
  10. follow steps 9 to all components under this category.
  11. restart the computer.

  It must reload the drivers for the CD/DVD drive.
  or

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00619385&LC=en&cc=us

  check on this site how to connect dvd cd players

  I tried the following to help resolve the problem:
  1 attached Mouse, provided power but does not recognize the device. Assistant add hardware does not yet come upward.
  2. 3 readers USB flash, in every port and they were not recognized or attached.
  3 uninstall all devices of USB root hub and rebooted. No change.
  4 uninstalled all the USB controllers and restarted. No change.
  5 install a logitech mouse driver that is the same as the mouse installed. The mouse has not always recognized.
  6 re-flashed the BIOS. No change
  7. utility of diagnosis of Dell Ran and no problem found with the controllers or the USB ports

• A scene does not play

  I have a menu with six scenes.  A scene does not play, but I don't get any error messages, it does not play.  The other five scenes play very well.  What should I do?

  FFerguson59

  What version of Premiere Elements you are using and on what computer operating system is running?

  What specific disc menu theme do you use?

  Scene markers how you have placed on the timeline of this project?

  Is there enough space between the markers of the scene so that none are essentially above the other?

  You wrote

  A scene does not play, but I don't get any error messages, it does not play.  The other five scenes play very well.  What should I do?

  Where you play these scenes of menu scene... in the section overview of disc menu section or elsewhere?

  If possible, please post a screenshot showing the location of the scene markers in the timeline of your project. Are there other brands of menu besides as markers on the timeline of the project stage?

  Thank you.

  RTA

• Why my Bank does not recognize my computer whenever I connect, and this only happens when I connect with Firefox not other browsers

  I connect to Bank and firefox remembers my account #, but when the next screen appears the Bank does not recognize my computer. Each time to answer the correct security question, I check the box to remember as a personal computer, but he never does. This only happens when I use Firefox, not other browsers. Other browsers don't forget Acct and that it is a personal computer.

  Many issues of the site can be caused by corrupted cookies or cache. To try to solve these problems, the first step is to clear cookies and cache.
  Note: This will be you temporarily disconnect all sites, you're connected to.
  To clear the cache and cookies to do the following:

  1. Go to Firefox > history > clear recent history or (if no Firefox button is displayed) go to tools > clear recent history.
  2. Under "Time range to clear", select "all".
  3. Now, click the arrow next to details to toggle the active details list.
  4. In the list of details, see the Cache and Cookies and uncheck everything.
  5. Now click the clear now button.

  More information can be found in article to clear your cache, history, and other personal information in Firefox .

  We hope to hear from you soon.

  I wouldn't store any bank information on your computer for various security issues.

• Pages does not open any file more except models

  From one day to the other Pages 5.6.1 does not open any more files on my MacBook Pro with OS X 10.11.3. I tried all means: 'Open recent', 'open... '. ","With "Open Pages", without result. A restart does not help. Best regards.

  Hi Ciroamos,

  I understand that you're having trouble to open a document Pages 5.6.1 on your MacBook Pro.  Have you recently updated or changed on demand?  Have you tried to open a Pages document on icloud drive, in addition to your computer? One thing I would try is to use Time Machine and go back to an earlier date and see if you can open a document.  If you can't, then you must uninstall the application Pages and re-download from the Mac App Store.

  I would add some information below to help you with these troubleshooting steps.

  Mac OS X: how to solve a software problem

  Use Time Machine to back up or restore your Mac

  Restore specific files:

  1. Enter in Time Machine, choose the Time Machine menu , or click on the Time Machine in the Dock.

     

  2. Find files to restore:
     • Use the timeline on the edge of the screen to see your Time Machine backup files, as they were at this date and time. The timeline may also include a snapshots the.
     • Use of the screen and down arrows to reach the last time the content of the window changes. You can also use the search field in a window to find a file and then move through time, well that centered on the changes to this file.
     • Select a file, then press the SPACEBAR to preview the file and make sure it is the one you want.
  3. Click on restore to restore the selected file, or Ctrl-click the file for other options.

  Download your latest purchases

  Redownload an app

  On a Mac or a PC

  You can redownload the apps for iOS in iTunes devices and applications for your computer in the Mac App Store.

  Since the Mac App Store

  1. Open the Mac App Store.
  2. From the top of the window, click on purchases. Your purchased apps will appear.
     
  3. Scroll down to find the application you want to download.
  4. Click on install or download to the right of the item you want to download. Your application will download to your computer.

  Take care

• Windows Multipoint Server 2011, several stations does not.

  WINDOWS MULTIPOINT SERVER 2011, SEVERAL STATIONS DOES NOT

  I USE WINDOWS MULTIPOINT SERVER 2011, TWO STATIONS OR MORE ARE NOT ABLE TO IMPLEMENT.

  I INSTALLED 20 CAL DEVICE

  HOW TO INSTALL SEVERAL STATIONS? ANY OTHER LICENSE, I NEED AGAIN?

  Help me. .

  CONTACT ME: * address email is removed from the privacy *

  Hello

  Because the problem is with Windows Multipoint Server, I recommend you post this question in the Forums of Windows Server.

• the Bank does not recognize your computer

  Approximately a week before, when I log into my bank account, the background would be dim and a window shows indicating that (the Bank) does not recognize my computer and to please fill in the following information such as card number, ATM number, etc..  Of course, I didn't fall for it, but the same problem exists for other accounts such as Amazon, my gas utility account, my credit card accounts, etc...  What kind of virus is it called? And how to remove it, isolate it or quarantine it?

  Thank you

  I95Jim

  PML... It's a tactic that I didn't think to try... again.  Just before, I had a discussion with an expert/technician(at www.supportservices.microsoft.com/support/expert/Waldo).. .He took a while, but he eventually removed the spyware that was causing me grief (TDSSKiller, Norton I think) and he did a few other things... then I tested a variety of accounts several times successfully, the virus disappeared.  But, thank you for your suggestion and keep that account as a possible solution for similar incidents in the future.  Yes, there is a FUTURE...!

  Thank you

  I95Jim

• My floppy drive is not reading the disks. Device Manager does not detect any problems, I uninstalled and reinstalled the drivers. What should I do now?

  My floppy drive is not reading the disks. Device Manager does not detect any problems, I uninstalled and reinstalled the drivers.
  Convenience store said to click on properties Insert the diskette and
  Double click on open, but when I do that it stop computer
  and opens the recovery and ask for a correct diskette,

  Hello Tallm,

  Thank you for your message.  Did you get your floppy drivers of your installation diskettes?  If so, go to the website of the manufacturer of your computer and download/install the latest drivers.  Please let us know if this or help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• I'm locked out of my iphone5 not connected to my wifi at home and my home button does not work, any ideas on how to fix?

  I'm locked out of my iphone5 not connected to my wifi at home and my home button does not work, any ideas on how to fix?

  < re-titled by host >

  Take it to an Apple Store for repair or replacement.

• Firefox does not open any window, on the menu bar that appears only in the menu "Firefox".

  This is happening to me since OSX Yosemite. Always the same in ElCapitan. Tried to remove and clean install FF, without success. I can't access what anyone, it does not open any other window, no preference do nothing.

  Hi again,

  no window-> no Burger.

  In the meantime, I was able to fix: FF installed in SafeMode to OSX. It works for me now in El Capitan, previously in Yosemite, it had no effect.

• My addons page does not appear any content or text

  Hello
  My addons page does not appear any content or text.

  Snapshot is in the link given below.
  http://I57.Tinypic.com/2vwek3n.PNG

  Start Firefox in Safe Mode {web link}
  While you are in safe mode;
  Press Alt or F10 to bring up the toolbar.
  Followed;

  Windows; Tools > Options
  Linux; Edit > Preferences
  Mac; name of the application > Preferences

  Then Advanced > General.
  Find and stop using hardware acceleration.

  Search web sites secure. Are there problems?

  Then restart.