SFC and NX - OS MDS9500 6.2 Distribution area (1)
Hi all!
I have a question. My layout of the SAN is configured 4 switches (remote control 2/2 local).
Fabric A:
Switch1 <------- dwdm ="" --------="">switch 3
Fabric b:
The switch 2 <------- dwdm="" ---------="">4
I made a change in the Call Home feature on the switch 1, but he sent him contact infor and everything to spend 3. I'm not the contact person for the switches 3 & 4.
My question is this: if I disable the CFS, he will intervene with the distribution of all areas? I need switches to be aware of the areas in the two tissues.
Any help is appreciated.
Kind regards
Nathan
Hello
Distribution of all areas uses not CFS.
You can disable CALLHOME distribuiton cfs independently or use parts of CFS.
Distribution of activation call home fabric.
http://www.Cisco.com/en/us/docs/switches/Datacenter/MDS9000/SW/6_2/configuration/guides/system_management/NX-OS/call.html#wp1094390
On the CFS regions
http://www.Cisco.com/en/us/docs/switches/Datacenter/MDS9000/SW/6_2/configuration/guides/system_management/NX-OS/CFS.html#wp1449187
Configuriong CFS regions
http://www.Cisco.com/en/us/docs/switches/Datacenter/MDS9000/SW/6_2/configuration/guides/system_management/NX-OS/CFS.html#wp1355839
Kind regards
David
------- >------- >
Tags: Cisco DataCenter
Similar Questions
-
Hi guys
help me troubleshoot the sfc and cmd
SFC.exe - Application error
The application failed to start properly (OXOOOO142).
Hi diqiman,
· What exactly have you tried to do?
· Have you made changes on the computer before this problem?
· Why you tried to perform the sfc scan?
I suggest you to follow the steps mentioned below and check if it helps.
Method 1: You may need to run as administrator command prompt. Try the following steps:
Click Start > type cmd in the search box > right-click on the command prompt and then click Run as administrator.
Method 2: If the problem persists, then try to start your computer in safe mode and check.
http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
Try to open the command prompt and then try to perform the scan sfc in safe mode.
For reference, please visit: http://support.microsoft.com/kb/936212
Let us know the status in safe mode.
Kind regards
Sandeep
Microsoft Answers Support Engineer
-
I have bsod problems. I'm putting SFC and @ 57%, it stops and it displays a message that it couldn't perform... When activated the journal CBS found that it always stop here:
2010-07-09 18:08:19, CSI 000000ec c0000185 (F) error [error, installation = (System), Code = 389 (0 x 0185)] #2332033 # Windows::Rtl:, evt = 0, apcr = NULL, apcc = NULL, iosb = @0xc8e64c, data = {b: 0}, byteoffset = 0, key = (null))
[gle = 0xd0000185]
2010-07-09 18:08:19, d:\longhorn\base\wcp\sil\merged\ntu\ntsystem.cpp(1947) 000000ed@2010/7/9:23:08:19.581 (F) CSI of the error: error c0000185 [error, installation = (System), Code = 389 (0 x 0185)] from the function expression Windows::Rtl:SystemImplementation:DirectFileSystemProvider:SysReadFile: (null)
[gle = 0 x 80004005]
2010-07-09 18:08:29, error CSI 000000ee c0000185 (F) [error, installation = (System), Code = 389 (0 x 0185)] #2332032 # to Windows::Rtl:SystemImplementation:CFile_IRtlFileTearoff:ReadFile(Flags_=_3,_Buffer_=_{l:0_ml:65536_b:},_Offset_=_0,_Disposition_=_0) [gle = 0xd0000185]Made a couple of times and always stops here. Check the disc and is ok. Ran memory diagnosis and ok. What can I do now?
If SFC finds serious errors that it cannot repair, you may need to do a upgrade Vista repair install.
If you do not have a DVD of Microsoft Vista, borrow one from a friend.
Read this tutorial on how to do a repair installation:
http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html
See you soon.
Mick Murphy - Microsoft partner
-
I'm on Acrobat 10 for mac and I need help with the distribution of shape feature. Is there a way to change the registration e-mail download addressed to the? Currently all forms I create and then distribute may only be subjected to my email account... I appreciate any help!
Do not use the feature distribute the form. Instead of this, just put up a button "submit" and configure it to send email using any email address you want. Just add a button and set the action of the mouse upward on "Submit a form" and use a type mailto URL and specify that you want to send the full PDF. Then activate the reader of the document: where "Advanced/extended features in Adobe Reader" is located in Acrobat XI?
If you really want to use distribute the form for some reason, change the e-mail address in your preferences: Edit > Preferences > identity > Email address
-
After turning on my wireless keyboard led green lights, then begins to blink, and then turns off. The batteries are fresh.
Possible explanation. It is likely that batteries, so fresh, can be irregular in size. The uncertain connection would therefore tend to lead to a failure to blink and you declare. Read my thing...
-
control of fascist style of addons is a bad thing and prevents from getting the modules there are out there of dev.
This will be only stifle creativity and prevent new addons are made.
Said heavyoak
control of fascist style of addons is a bad thing and prevents from getting the modules there are out there of dev.
This will be only stifle creativity and prevent new addons are made.
How is that what does strike you?
https://blog.Mozilla.org/addons/2015/08/21/the-future-of-developing-Firefox-Add-ons/«We are implementing a new extension API, called WebExtensions...» »
The infrastructure of the current extensions will be gone and with it will have the advantage of current extensibility that Firefox had more Chrome and Opera. Kinda like the rating "fascism" for "communism".
So at the end of next year we can be moaning about something much bigger than the current "signature" minor schism or "bump in the road."
-
I have three charges on my account and I need to know what they are for?
I have 3 charges on my bank account for $ 14.99, $9.99 and $5.98... and I don't know what they are, please specify
Thank you
This is a user to user forum, you don't talk to Apple.
You can go to http://reportaproblem.apple.com to see all your purchases for the last 90 days. You can then report any strange activity there.
-
In preferences-saved passwords for Chrome://weave (Services of Mozilla password) and Mozilla Services Encriptación Passphrase) what are these and are they necessary?
If you define a sync and create a new account to sync or connect to an existing synchronization account then Firefox stores the credentials (name, password and key Sync) in password manager to allow to connect to this account when you start Firefox.
If you remove these entries in password manager then sync will stop working and you will have to set up the synchronization again. -
iMac asks me to enter a password to open any AND ALL PDF regardless of whether they are protected content or not - how can I fix this annoying problem?
If you always use the Mavericks as your profile States, I ran repair permissions in disk utility.
If you run El Capitan, I run first aid in disk utility and update your profile.
-
I use firefox 3.6.4 Dutch. Some sites phone numbers are only visible for 1 second, and then they disappear. What refresing are new visible for 1 second.
This has happened
Each time Firefox opened
Hello
the issue of the disappearance of telephone numbers can be corrected by turning off the Skype add-on:
- Go to tools > Modules.
- Find the Skype add-on in the list.
- Click on disable or Uninstall button.
- Restart Firefox.
Tobbi-
-
I have House part for my iPhone and apple TV, but the iPhone libraries are not listed under computers on Apple TV. I don't see libraries for my Mac. I use the same identifier apple through the three devices. I have an iPhone 6 more working 9.0. The devices are all on the same home network running.
You can't share a library that is located on an iPhone, iPod or iPad with other devices. You can only share a library that is located on a Mac or a PC with other devices. On other devices, iPhone, iPod and iPad for example, you then activate home sharing to connect to the shared library.
-
I have several iTunes Store purchases that appear on my bank statement and I don't know what they are for. Can you help me? I'm unable to maneuver through this system to view previous purchases. I wonder if I pay for extra storage, it is always advising me that I'm pretty sure.
Hello
Open iTunes on your Mac and click your name (if you are not signed in, then sign to see your name). Then click on account information. Once you enter the account information screen, you will see a section called historical of purchases. Click 'View all' to see the list of purchases and the ability to watch the dates more.
See you soon,.
GB
-
I have loaded the CD of music on itunes have some of the "grayed out" album titles, and only the album in 'bold' beaches are synced to my iphone 5. Any help in this appreciated.
Thank you
Dr.
Only the sight of songs using the drop-down list located at the top right of the playlist. CTRL + click all empty the box to check, or ctrl-click on a square filled twice. This will ensure that all tracks are checked and enabled for synchronization or shuffle playback.
TT2
-
Why am I selling a total of 41 pounds (various titles) in November through Kindle, but not one through iBooks? I don't promote either, and I don't know that there are several iPads out there than Kindle. Apple does not have any promotion?
Why are you asking? It's between you and Apple.
-
Screen of remote desktop: fonts and icons of the remote desktop window are so small
I try to connect via Office server2012 windows remotely.
The remote computer is a Server Terminal server where at least 240 users are connected.
The fonts and icons of the remote desktop window are so small, all other users who are connected to the same server have no problem with the font size or the size of the window. everything seems normal
But when I connect remotely, the size of the window and the police are so small. I can't use any application on remote because of the size of the font.
Please suggest...
Hello
Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.
http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
See you soon.
Maybe you are looking for
-
I can't download Dungeon tinseltown 2009 error 228. The binding extension is .fx
I had a problem with firefox 3.5 and had to have it uninstalled professionally. Then I installed the version 3.6, but when I tried to add the tinsel town theme I kept getting the error message 228. I tried to download the link that ended in .fx howev
-
With two years of development, reviews the considerable industry and more than five hundred engineers working on this project, we give you the F5 and F55 CineAlta 4 K acquisition technology. In response to popular demand, you can interact with Sony h
-
Impossible to compile the FPGA in project
Hello I get the following error when I am trying to compile an FPGA VI on a Compact Rio 9022, I missing something on my stand in? Everyone has seen this before and know what is happening? An internal software error occurred. Please contact National I
-
I tried to install a game called Guitar Hero World Tour for the second time on my computer. The first time I didn't delete it properly: I deleted everything first in the folder that leave the Add / Remove programs and now when I run the installation
-
envy5530: touch screen on envy 5530
is there a secret to the touchscreen? Sometimes a single key will do, sometimes two. Sometimes, nothing works.