SFC/scannow does not correct errors in 64-bit Windows 8

Similar Questions

• White screen at the Vista start up... only the mouse pointer, loading the driver freezes on crcdisk.sys loading, sfc/scannow does not work...

  Hello
  I don't know if this is the right place for this post... Sorry if it's not! I had looked online if anyone has the same problem to me, I found similar problems, but not the mine one (but if there is, can you please give me the link?).
  I have a DELL LATITUDE D830's with a dual boot (Ubuntu and Vista). When I run Vista I get the Windows logo and then a black screen with only the mouse pointer.
  Keyboard does not work. I can move the mouse, but can not select anything. No work of Ctr + Alt + Delete.
  I can just turn off the computer. At first I need to press F8 to choose something otherwise I get the black screen.
  If I reboot requesting the automatic restoration of the PC that he asks me the account and work only account is mine a (no administrator available). He then suggested to contact the administrator. I checked the error report and nothing is reported: the system works.
  I have no previous configuration to restore.
  I can access the command prompt. So I tried to write sfc/scannow. The answer is that to complete the process requires to restart the computer and make again sfc/scannow. I restart again, the new order, but I get the same answer...
  When I get the black screen, CPU is not disabled, because after a long time (about 2 hours) the computer restarts itself... If something happens even if I don't know what!

  The only thing I have not tried is to restore Vista from CD... I'm really afraid that this could remove the partition, or crash at startup I have, by removing access to Linux!

  I have a backup of all my files, so no matter if what I have to do to cancel my files, but what I really need is to keep Linux operating.

  So, if you have any suggestions... I'm not good at using the computer, so, please, a solution step by step be really appreciate it!
  Thank you very much

  Paola

  PS No peripherics are connected, the wireless is disabled

  Hi seymar,.

  I suggest that you run a tool to restart system on the computer and check if it works.

  If you have a Windows Vista installation disc, you need to restart (boot) your computer using the installation disc. If you do not restart your computer from the disk, the option to repair your computer will not appear.

  1. Insert the installation disc.
  2. restart your computer.
  Click the Start button, click the arrow next to the lock button, and then click restart.
  3. If you are prompted, Press any key to start Windows from the installation disc.
  Note If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change the BIOS settingsfor your computer. For more information, see BIOS: frequently asked questions. 4. choose your language settings, and then click Next.
  5. click on repair your computer.
  6. Select the operating system you want to repair, and then click Next.
  7. in the System Recovery Options menu, click Startup Repair.
   
  Check out the link for more information below.
  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-fix-a-boot-startup-problem

  If the previous step fails then I suggest that you run CHKDSK on the computer to check if there are any errors on the hard drive.
  1. Insert the installation disc.
  2. restart your computer.
  Click the Start button, click the arrow next to the lock button, and then click restart.
  3. If you are prompted, Press any key to start Windows from the installation disc.
  Note: If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change the BIOS settingsfor your computer. For more information, see BIOS: frequently asked questions.
  4. choose your language settings, and then click Next.
  5. click on repair your computer.
  6. Select the operating system you want to repair, and then click Next.
  7. in the System Recovery Options menu, click on the command prompt and type chkdsk command-line /f and wait until the scan is complete and later to restart the computer and check what is happening.

  For more information please visit the link below.
  http://Windows.Microsoft.com/en-us/Windows-Vista/make-system-repairs-from-the-Windows-recovery-environment-from-Windows-Vista-inside-out Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• sfc/scannow does not box gets up and starts to run

  I want to run a scan had sfc/scannow, all put in place with private admin and press on enter it gets first line up and then stops and says can not run this analysis

  Thank you everyone but I didn't like some of the answers said question and ran the SFC /scanow in safe mode and it works now

• sfc/scannow does not work

  whenever I run the sfc/scannow, it start error below. I don't know what maintenance or repair is running. I use 8 64-bit windows.

  could someone help me please?

  

  Hello

  You can restart the system and try the command again and see if it works. If you still receive the same error, try the commands DISM which is useful when setting the corruption that couldn't be fixed by SFC. Read more here:

  http://www.kapilarya.com/fix-do-Inbox-Corruption-repair-using-DISM-in-Windows-8

  Hope this helps, good luck :)

• Bluetooth doesn't work does not correctly after the installation of Windows Vista Home Premium Service Pack 2 (SP2) on Dell laptop

  I searched this forum and almost all resources on the net for days now nothing works.  Give the message to a thread more appropriate that I couldn't find one that is truly representative and am a newb at this.

  Summary of the problem: Bluetooth connectivity does not work properly after the window Vista Home Premium Service Pack 1 and 2 installation (SP 1 and 2).

  My system:

  Laptop Dell Inspiron E1705, 32-bit Winows Vista Home Premium SP2, Dell Wireless Bluetooth 355 Module + EDR 2.0

  * My system was purchased in 2006 with Windows XP, but was not entitled to a free Windows Vista Home Premium Upgrade I did. I installed Windows Service Pack 1 and 2 about a week ago.

  Problem: After downloading and installing the Windows Vista Home Premium Service Pack 1 and 2 (SP 1 and 2), my system does not recognize my Bluetooth (a touch of Sprint also) device known as the HTC Vogue.  I stress that I have not had any problems with this device before downloads.  I can't revert to the pre - SP State 1 and 2 because my system restore does not have these points more.

  I have read several posts on various sites about people having similar problems with Bluetooth connectivity after the Vista SP 1 and 2 facilities.  The problem is obviously the need for an updated driver.  I went to the site to download driver Dell and the Blueooth only updates available are the following. (Note: these drivers all date from 2006 and 2007).

  http://support.dell.com/support/downloads/driverslist.aspx?c=us&cs=RC956904&l=en&s=pub&SystemID=INS_PNT_P4_9400&os=WLH&osl=en&servicetag=&catid=-1&impid=-1&deviceid=12084&libid=5&typeid=-1&dateid=-1&formatid=-1&source=-1&releaseid=R159805&formatcnt=1&vercnt=1

  I had these installed before the SP 1 and 2 have been installed and they worked very well. After the upgrade, these drivers do not work.  They won't recognise BT devices.  I tried to upgrade the drivers by using update Broadcom suggested below it, but an error of following installation to contact Dell.

  http://www.Broadcom.com/support/Bluetooth/update.php

  I contacted Dell via e-mail and on the phone, but they want to charge me $60 for a one time service call just to talk about the problem because my warranty has expired. Provide updated drivers is not a problem of security in my opinion.  Even after explaining the situation, their continuous support to just send me the link to download Driver Dell above with out-of-date drivers.  I guess that's what they are charged to do, they do not have to admit a problem of compatibility.  This obviously the same link they would charge $60 to send.  I explained that I need just a Bluetooth Driver from Dell to at least version 6.3.   Needless to say, I will never buy another Dell product.

  On my end, I tried to uninstall my current drivers and then by installing a newer driver to support Gateway (Version 6.2.1.500 for and Acer).  This allows me to install some parts of this update and the update Broadcom. However, it is not a perfect installation and expires after about 90% saying "this update is not for this system" because it is the gateway not Dell to be provided.  Displays the version of the driver on my computer is Version 6.3.5.430 after doing this, but it is not a complete installation and some features are not available.

  Does anyone have experience with this issue? I would like to have a link with some bluetooth drivers generic Version 6.3 type which will allow me to use the Broadcom link to upgrade to the last version that works with Vista SP 1 and 2.

  Thank you for your help.

  Support FREE from Microsoft for SP2:

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until August 30, 2010.

  Microsoft free support for Vista SP2 at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• Satellite L775-19th Keybord does not correctly and unrecognized HDMI - 10 Windows

  After the upgrade of Windows 10 regrettable, some keys on my keyboard (SPACEBAR, number one, fn keys) no longer work and I can't go to my external screen.
  Cannot find any appropriate windows 10 drivers for my keyboard or nvidia.
  Any ideas how I might switch to the external display without the keys - could be some time before that Toshiba makes available the relevant drivers but I need to use an external display badly (I now use an external keyboard, but it doesn't have the same keys as my laptop keyboard)

  With regard to the problem of keyboard:
  I recommend you update Windows 10 and to check new updates of MS that are not installed.
  I read that some MS updates would solve problems of possible keyboard.

  Here is a thread about keyboard and question 10 of Windows:
  https://Forum.Toshiba.EU/showthread.php?84287

  With regard to the nVidia Driver:
  Well, you might find some compatible drivers on the page of the driver nVidia... This could be one of the possible solutions... Another idea: let search system graphics driver to be automatically updated via Device Manager...

• Firefox does not start on my 64-bit windows computer 7. Norton Antivirus and Webroot running in the background.

  It started with the new mozilla update October 3, 2015. I have no error message.

  1 no, the Crash reporter etc is something I've not seen.
  2. However, cutting the 'Protected Mode' for update Mozila in Webroot has worked. I stopped various features of Webroot individually and hitting on one that worked.

  Thanks for your help.

• error code 259 does not correctly updated to sp62736.

  I have a Hp Pavilion 500-141ea im trying to update the IDT audio driver for windows 8, I supported SP sp62736, it passes through the installation procedure, then it stops and comes up with this error code 259 does not correctly updated, I even disabled etc still the same antivirus software.

  Any idea?

  Hi Apache1968,

  If everything works at the moment, with the exception of downloading then I would leave it as it is. The whole "don't mess with what works" thing.

  Thank you

• Client RDP does not correctly open after n time

  7 Enterprise x 64 SP1

  I've migrated to a new laptop about two weeks ago. Migrate to using Windows Easy Transfer. We use Remote Desktop Manager of devolution for RDP connections on my data center. I installed the latest version 8.3.1.0 since I am trying to set me up on top of another computer. It worked very well for most of the day, once I installed and imported my connections to the server. After maybe 6 hours of use, I was unable to reconnect to disconnected sessions or open new sessions. I thought it maybe something with this version, so I uninstalled with Revo Uninstaller to remove all left behind in the registry items, etc. Thinking that perhaps it was this new version, after a reboot, I installed the previous version we used without problem for months, 8.0.12.0.  Work started very well and then after half of my day, it's the same thing, impossible to connect to a disconnected or open sessions. After the closure of Remote Desktop Manager, it leaves the process running there a connection with something, that's not normal behavior. Then, while he was doing this, I tried Windows Remote Desktop connection to try to connect to a server and it gave me the same result. I type my server name in, it could begin the login process, warn me NLA, after pressing Yes and that she would go to the remote session configuration with the loading bar. However, it does connect not what either (work servers I know). Does not seem to mistake, just never loads anything. If I press cancel, it goes back to the screen to specify which server to connect to, but everything is grey, as a connection is suspended.

  I ran all of the important Microsoft and most of the recommended, and optional updates related to the operating system, less the language packs, Bing, etc.. SFC/scannow has detected an error with Diskmgt.chm and repaired. I came across a forum on XP and default.rdp missing in the Documents folder, but can't seem to find anything on Win 7. The only way to make it work again I found it to do a restart of the computer. Try logging off the coast, and then again, but it gives the same result, until I restart. It is not the case after the same amount of time, sometimes it's a few hours, at other times, it's almost the whole day until it happens.

  Any guidance?

  Hi Shakur,

  I posted there is first of all a few days ago and have not received a response yet, so I thought I would try here also.
  Happened yesterday again, worked for about 6 hours of the day and then wham! Will not work until a reboot. Worked fine on my old laptop and everybody on my team, this new notebook computer server. Trying to remove KB2592687. Someone mentioned that was causing errors with RemoteApps on 2008 R2. Thought it was worth a shot.
  Thank you

• disc eject does not correctly persist

  I get several error messages that my external hard drive was not ejected correctly. I ejected it, turned off, unplugged and then reverse the process. Whenever my screen locks when I open it there are several messages not eject disks does not correctly.

  Restart your Mac, and then drag the disc on the desktop for the external drive to the trash.

• Why is one of my 4 5893 Modules doesn't work does not correctly?

  Hello

  This is the configuration of my HW and SW:

  LabView 2013 SP1

  1 x cRIO 9076

  4 x NI 9853 CAN Modules

  CAN0 - 1000 Kbps, entry timeout = 0, OutputTimeOut = 10000, Module clock: 20 MHz

  CAN1 - 500 Kbps, entry timeout = 0, OutputTimeOut = 10000, Module clock: 20 MHz

  I worked on a program for a test system, where each Module 9853 control two devices (CAN0 and CAN1), the same type of systems is controlled by other 9853 3 Modules in parallel.

  So basically, I use exactly the same functions for each module. So far, everything has worked correctly on module 1, but now that I started to test all other modules I have the problem that Module 3/CAN0 does not correctly read the information.

  While watching the FPGA façade, I see that each 10000ms one value is read, but only on that ONE module (frames are sent every 1ms from my unit)

  I tested the HW itself using the included examples and it works correctly, the only difference is that the example used only 2 Modules, one to send data and the other to receive it.

  I included my FPGA program as an image, I really don't think there is a problem with my RT SW, because all the other modules are working properly. Basically, my SW FPGA bed CAN Modules and puts the information in a FIFO, if there is an error (no information), it will make a loop once more and check again.

  Thanks for your help

  I solved the problem, it was an error of configuration on my side.

  The entry for Module3 CAN1 time-out was set up NOT as 0ms and 10000ms as I thought! , so that was my reading for DUT3 loop run only every 10000ms.

• My ipod does not correctly install when I plugged in now mobile USB keeps freezing

  My ipod does not correctly install when I plugged it into USB. Since then, my laptop keeps freezing / crashing.  Start repair found the problem mentioned but could not fix it and just send an error report.

  I tried restoring the system and installed the updates of windows, but I still have the problem. I reinstalled itunes and my AV is up to date, I can't find a solution.

  Hello

  1. are you confronted this question all the time or only when using the IPOD?

  2. What is the brand and model of the computer?

  3 Please, try to connect the Ipod to different USB ports in the back and the front of the tower and check if you face the same problem.

  Please follow the links below to solve the problem.
   
  Method 1
   
  Start your computer in a clean boot and check for conflicts with third-party software.
   
  Start your computer in a clean boot.

  
  http://support.Microsoft.com/kb/929135
   
  Note: Please follow step 7 of the article mentioned below to start the computer normally, after completing the necessary troubleshooting.
   
  Method 2

  Step 1

  What is safe mode?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-safe-mode

  Step 2

  Install this update and check if the problem is resolved.

  Update for Windows Vista (KB925528)
  
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=620

  Also try to update the latest version of the drivers your controllers USB host, on the manufacturers site.

  I hope this helps.

• Windows Installer does not properly error Code: 641

  HAVE WINDOWS VISTA HOME PREMIUM WINDOWS SETUP DOES NOT CORRECTLY GIVES 641 ERROR WHEN AUTO UPDATE TRIES TO INSTALL IMPORTANT UPDATES.  DON'T ME LETS NOT UNINSTALL A PROGRAM SAYS CAN'T ACCESS THE WINDOWS INSTALL.

  You have installed system mechanic? This is what it seems possible that a recent analysis could have messed up windows installer, so causing problems similar to what you describe.

  I followed the instructions in this thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/Windows-Installer-and-error-codes-641-80070641/24fd9f52-7faa-4f80-8f8e-8c7cd80dd481

  Easy to follow, even for an old man like me.

• Windows media Center and games does not work, and does not work error message d3d8thk.dll

  my media library does not work and message d3d8thk.dll isn't continuous work to come.  How should I do?

  D3d8.dll error message could apply to any program that uses Microsoft DirectX, most video games.  I suggest following the steps below to solve the problem.

  1 restart your computer if you have not yet.

  D3d8.dll error could be a stroke of luck and a simple restart could clear up completely.

  2. install the latest version of Microsoft DirectX.  Chances are, the upgrade to the latest version of DirectX will fix the d3d8.dll not found error.

  Note: Microsoft frequently publishes updates of DirectX without updating the version number or letter, so don't forget to install the latest version even if your version is technically identical.

  Note: The latest version of DirectX should be installed no matter if you are running Windows 7, Windows Vista or Windows XP.  Installation can include DirectX9 and DirectX10 files but they run side-by-side without problem on all these operating systems.

  3. assuming that the latest version of Microsoft DirectX does not correct the error of d3d8.dll you receive, search for an installer of DirectX on your game or application CD or DVD.  Usually, if a game or other program uses DirectX, software developers includes a copy of DirectX on the installation disc.

  Sometimes, but not often, the DirectX version, included on the disc is a better fit for the program than the last version available online.

  4 uninstall the game or software program and then reinstall it again.  Something could have happened to the files in the program work with d3d8.dll and a reinstall might do the trick.

  5. restore the file d3d8.dll since the latest DirectX software package.  If the troubleshooting steps above have not worked to resolve your error d3d8.dll, try to extract the d3d8.dll individually from the downloadable package of DirectX.

  I hope the information is useful.

  Kind regards

• Request close does not correctly after the addition of SceneCover (QML)

  Just added a SceneCover exposed to QML, wanted to change my implementation of shit,

  Page {
  
      onCreationCompleted: {        Application.setCover(sceneCover)    }
  
    attachedObjects: [
  
        // An Active Frame is a Scene Cover      SceneCover {          id: sceneCover          content: Container {              background: Color.create("Black")          }
  
        },
  

  
  #include "applicationui.hpp"
  //#include "ActiveFrameQML.h"
  
  #include 
  #include 
  #include 
  #include 
  #include 
  //#include "OrientationSensor.hpp"
  using namespace bb::cascades;
  
  ApplicationUI::ApplicationUI(bb::cascades::Application *app) :
          QObject(app) {
      displayInformation = new si::blackberrydev::DisplayInformation;
      qmlRegisterType("bb.cascades", 1, 2, "SceneCover");
      qmlRegisterUncreatableType("bb.cascades", 1, 2, "AbstractCover", "");
      // Create scene document from main.qml asset, the parent is set
      // to ensure the document gets destroyed properly at shut down.
      QmlDocument *qml = QmlDocument::create("asset:///main.qml").parent(this);
      // Create root object for the UI
      qml->setContextProperty("display", displayInformation);
      AbstractPane *root = qml->createRootObject();
      // Set created root object as the application scene
      Application::instance()->setScene(root);
  }
  

  Now, whenever the application closes, it does and does not correctly close until terminated manually:

  

  It does not show this on the console but I'm not a clue what he is to me: "0x85ab510 error: must be attached to a control, no bb::cascades:QmlPage (0x85269a8).

  Any Suggestions?

  10.2 minimum API level targeting

  I noticed that, while this works, attaching class SceneCover application directly gives an error of bps to the exit event.

  To avoid this error, set the class of SceneCover via ComponentDefinition and attach it to the Application class.

  I have attached a code snippet below:

  onCreationCompleted: {
      Application.setCover(sceneCoverDef.createObject())
  }
  attachedObjects: [
      ComponentDefinition {
          id: sceneCoverDef
          SceneCover {
              content: Container {
                  background: Color.create("#000000")
                  Label {
                      text: "hello"
                  }
              }
          }
      }
  ]
  

  Try and see if the error persists.