SFC

Similar Questions

• Problem starting after Sfc scan on my Pavilion 15-n012Tx

  Recently, I ran sfc scan, after that he told me to reboot my system. Then I tried to restart my system, but it has not turned on yet. I don't know how to solve this problem, help me please. My laptop model No 15-n012Tx with the windows operating system 8.

  Hi King123,

  Thank you for visiting the Forums HP's Support and welcome. I have read your thread on your HP Pavilion Notebook 15-n012tx and does not not according to a sfc scan. Here is a link to perform a reset.

  If it helps here is a link to perform a restore of the system.

  I hope this helps.

  Thank you.

• SFC DOES NOT WORK

  When I try to run SFC/scannow, it will start and then gives me a message that it cannot run this program...  I use build 10041' and nothing has changed since I installed it...  I was wondering if this is a common problem or what?  Any help is appreciated.    I use an administrator command prompt.

  RA

  What is the exact error message?

  There is something special, that you must earn 10 to run SFC.  read the wiki to find out what

  Please run a check of system files (SFC) & DISM if you're on win 8 or higher 

  
  

  All instructions are in our Wiki article below...
  If you have any questions please ask us for .

  Check the file system (CFS) Scan and repair system files

• Error 80070490 vista sp2 installation. SFC said CBS mum missing kb905866 - y at - it complete a simpler than a repair solution?

  I'm having the same problem as others, i.e. a previous update failed during installation (power failure) and now Vista SP2 install it, complain about 80070490. Running sfc/scannow says I have 6 CBS MUM missing kb905866. Recommendation found Googling this problem from microsoft is to repair vista, requiring downloads of the entire suite of updates which will take ages!  Can't I just uninstall the KB or remove the registry entries for it or something to force it to be reinstalled?

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been postponed until February 26, 2010, so move on!

  Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.

  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack).

• new laptop WMP does not done sfc/scannow and it had not been violated

  I just got this laptop barely two weeks played WMP and had it pinned to the taskbar, but I have this marking, then evil. In properties it says that the device was working properly. says that all diagnostic tools was fine, the sfc/scannow in the prompt doesn't say there is no violation I tried system restore, but doesn't seem to help don't know more

  Hello

  1. What is the problem exactly are you facing Windows Media Player?

  2. what version of operating system do you use?

  3. are you able to open WMP?

  4. have you made changes on the computer before this problem?

  5. do you get an error message? If Yes, what is the exact full error message?

  Follow the methods below:

  Method 1:

  You can try to run the Windows Media Player settings Troubleshooter and check if this solves the problem. Check out the following link to do the same thing:

  Open the troubleshooter in the Windows Media Player settings.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Method 2: Disable and re-enable Windows Media Player of "turn windows features on or off".

  Features on or off Windows activate: http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off

   

  Hope the above information is helpful.

• Windows system file checker (sfc.exe) for vista

  for some time I have been questions in Microsoft questions and things answers.mainly does not properly in my computer.now that I just learned that I have a System File Checker tool in my computer that finds all windows corrupt the file in my computer and fix it.and if I have windows files missing they will replace it... I didn't know I had.it States if your computer is slowing down or crashing, no matter what material is slow or does not work it is most likely that you have a lack of windows file or a file that is corrupted .you can find your rejection to start your computer.now wouldn't great if it could come in automatic mode say every month check on your computer, repair files lost or corrupted, if your computer runs like new. I an engineer coming around today to tell me any it.because as I said I'm on over the years and a lot about computers, I don't have really know.like much people.if it is a tool to help us with our computers, we should use it.please Microsoft allows to get this working so its on our computers automatic to keep running as new.also whole body outside their who can help me with more info about system file sfc.exe.would auditor all be aid.

  Bob

  http://support.Microsoft.com/kb/929833

  http://www.Vistax64.com/tutorials/66978-system-files-SFC-command.html

  System File Checker is not a universal solution, but it can help in certain situations.

  You really ned to determine the nature of the error before deciding on solutions.

  Event Viewer reports

  1. normally, when an error occurs on your computer looking in Event Viewer should be your starting point to find a solution. More related system errors are recorded and get an exact copy of the relevant report is important. Unfortunately, is not easy to understand reports and most of the users computer need help with their interpretation. I have to say later interpretation.

  2 Event Viewer includes three main newspapers of Windows. Here's the Application, security, and system. For purposes of troubleshooting system is by far the most important.

  3. to access the system log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window select Windows and the system logs. Place the cursor on the system, right click and select filter current log. Check the front of the error and click OK and see you only reports errors. Click the Date and time column header to sort. You may need to click a second time to see the last report above.

  4. a tip for posting copies of error reports! Run Event Viewer and double-click the error you want to copy. Select the Details tab and check the box in front of the XML view. Click the copy button to place a copy in the Clipboard and close Event Viewer. Now start your message and paste it into the body of the message. Make sure that it is the first dough right out of the event viewer.

  5. He cautioned against three types of reports, information, and reports errors. In most situations, it is the error reports that offer the best information but sometimes WARNING reports provide useful clues.

  6. all reports have stamps date and hour and when troubleshooting, it is important to focus on the latest reports. Reports of studies from the point when the computer is started, and then check if a similar report appeared in the previous session. If errors do not repeat investigation as to why they happen is wasted effort.

  7. in the individual reports the most important information is the event ID and Source such as these help when looking for help on the internet. The description is just as important and copy the exact text to use as search criteria greatly helps achieve better results when using Google. Not paraphrase descriptions when other people asking for help.

• SFC fails to fix damage

  C:\>sfc/scannow
  Windows resource protection could not start the repair service.

  I started as an administrator. Then, after a lot of mucking around; I had to change the WRP service manual, I had to remove pending.xml that required me to appropriate them, then reboot, then I was able to remove, so I ran sfc;

  C:\Users\Soob>sfc/scannow

  Start scanning system.  This process will take time.

  Start of the phase of verification of the scanning system.
  Full check of 100%.
  Windows resource protection found corrupt files but was unable to repair some of th
  EM.
  Details are provided in convertible bonds. Journal windir\Logs\CBS\CBS.log. For example
  C:\Windows\Logs\CBS\CBS.log

  The relevent part, I think, of the newspaper:

  2010-12-19 11:16:37, CSI Info 0000038b Verify [SR] full
  2010-12-19 11:16:37, components repair 1 CSI Info 0000038 c [SR]
  2010-12-19 11:16:37, CSI Info 0000038 d [SR] beginning verify and repair transaction
  2010-12-19 11:16:38, Info CSI 0000038e Member \SystemRoot\WinSxS\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7600.16385_none_655452efe0fb810b\cmiv2.dll file hashes are not actual file [l:18 {9}] "cmiv2.dll": "
  Found: {l:32 b:6HWGRbHMMdACxm / K + 4Q2z2bbL67mt7AqpTJ3evYH2TI =} expected: {l:32 b:DZK6u7O6ZJ + ZMbLDdh + wYt2YD26yuYOmki01E + 3Nutc =}
  2010-12-19 11:16:38, CSI Info 0000038f [SR] cannot repair the military record [l:18 {9}] "cmiv2.dll" Microsoft-Windows-ServicingStack, Version 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 = (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2010-12-19 11:16:38, info CSI 00000390 Member \SystemRoot\WinSxS\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7600.16385_none_655452efe0fb810b\cmiv2.dll file hashes are not actual file [l:18 {9}] "cmiv2.dll": "
  Found: {l:32 b:6HWGRbHMMdACxm / K + 4Q2z2bbL67mt7AqpTJ3evYH2TI =} expected: {l:32 b:DZK6u7O6ZJ + ZMbLDdh + wYt2YD26yuYOmki01E + 3Nutc =}
  2010-12-19 11:16:38, info CSI 00000391 [SR]cannot repair the military record [l:18 {9}] "cmiv2.dll" Microsoft-Windows-ServicingStack, Version 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 = (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2010-12-19 11:16:38, info CSI 00000392 [SR] this element is referenced by [l:202 {101}] "Microsoft-Windows-Foundation-Package ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.1.7600.16385.WindowsFoundationDelivery '.

  Soob,

  The update issue occurs because winsxs cmiv2.dll hashes do not match the actual file hash values in the servicing stack, which is located in
  Windows\System32\AdvancedInstallers.
  The CBS.log newspaper shows can not repair the military file and its location,Microsoft-Windows-ServicingStack cmiv2.dll.
  Which brings us to assume it refers to the file in the AdvancedInstallers subfolder.
  You can replace cmiv2.dll using one of these 3 methods-

  1 1 extraire extract from the Windows 7 DVD, grant Full permissions, take ownership of cmiv2.dll in the AdvancedInstallers subfolder, delete it, replace it with the copy of the extracted, repossess TrustedInstaller (owner of all system files), restart and check if the update issue is resolved.
  How to extract system files missing from the DVD of Windows 7/Vista
  2. make a "in-place upgrade", alias Installation repair - repair facility 
  Please take note of the recommendation to temporarily disable the installed AV, in your case, it would be trend. Recommend to Configure the system to boot if you aren't 100% sure the deactivation of all processes of trends and components.
  After doing the above, that the system must have all updates for Windows 7 installed that were available in the system when it started first.

  3. do a clean install of Windows 7.

  Expert MowGreen Windows IT Pro - consumer safety

• I had a windows update error 800736B 3... and I've done sfc scan I got error WFP resourse found corrupt files but unable to fix some problem... so please me cum on this problem

  I had a windows update error 800736B 3... and I've done sfc scan I got error WFP resourse found corrupt files but unable to fix some problem... so please me cum on this problem

  If the SFC does not a repair installation should work.
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.HTML?filter>

• Error of SFC/Scannow

  Features Windows screen is empty. Tried the fix in the article of knowledge to run sfc/scannow, but he did not run. I lost hours and hours with this problem now!

  Error: Windows Protection could not start the repair service.

  Please read http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/1467f44b-ee27-4f7d-98d7-f1c4b35b3395

  The "Windows features" dialog box is empty in Windows 7 or Windows Vista...
  http://support.Microsoft.com/kb/931712

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• SFC/scannow running on an XP Pro - SP3 without a CD XP Pro SP3 with the system files that SFC can recreatives__ form

  SFC/scannow running on an XP Pro - SP3 system without a CD with XP Pro SP3 files can be used by SFC form

  Transfer your question here: http://social.answers.microsoft.com/Forums/en-US/xpperformance/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Code 80070570 then sfc/scannow now, Windows can not tasks

  I started w / updated to a recommended update and received the code 80070570. Through your site read how the SFC scan. I started the scan ran up to 68% and then said Windows Resource Protection could not perform the requested operation. What should I do now.

  Go to http://social.technet.microsoft.com/Forums/en/itprovistasp/thread/bf1e6da1-504e-4061-bb02-544a4a2fed70 I hope this helps.

  Good day.

• C:\Windows\system32\sfc.dll is the error message I receive while trying to install a game on a DVD.

  When I close the error message the game window tries to install then I get a file closing message installation failure.     Setup.exe bad Image C:\Windows\system32\sfc.dll

  Probably, you need perform the repair facility, see this link http://www.sevenforums.com/tutorials/3413-repair-install.html

• SFC windows file protection could not run a scan of protected system files

  Hello

  First of all I am sorry for my English

  My problem is the application of file system auditor

  When run in the console, I get this message:

  Windows file protection could not initiate a scan of protected system files

  the specified error 0x000006ba code [the RPC server is unavailable]

  I also test the problem in safe mode and get the same message

  even I check the "SFCDisable" registry key and set it to zero but not solved the problem

  do you have any idea?

  Hello

  Try this:
  Click Start , then run... and type cmd and press enter.
  Now, type enable RpcSs SYSTEM_AUTO_START and press enter.

  Restart your PC and see if you can run sfc.

  If not then try a chkdsk which is what helped me with the same question :)

  --> I hope this helps! Please mark it as correct answer or vote if it does :)<>

  http://www.pcuk.biz - my website
  

  Info from Microsoft about phishing . Information from Microsoft on the fake security software

• Installation of XP/SP3 / requests sfc/scannow command

  I have a genuine copy of XP SP3 installed on my computer (performed by a computer technician), but previously, I don't have an XP installation CD and I didn't know the details of the product key.

  I managed to get the 25 product key - Belarc figure both Magical Jelly Bean (!) Detectors of key Windows gave me exactly the same code.

  I also managed to get a XP SP2 installation CD authentic with COA + keys used - haven't seen any ones SP3 and Microsoft is no longer distribute a XP software. It says distribution only with a new PC - is this correct?

  Will be a computer technician can reinstall XP SP3 using the this and updated - SP3 will still be available for download now that support has ended for XP?

  In addition, you kindly confirm that this CD that will allow me to make the sfc/scannow command. ; When I tried to asked me repeatedly for the XP installation CD.

  This CD SP2 / SP3 computer difference leaves me unsure.

  A modern operating system would be better I know, but I'm not able to get a new computer at the moment.

  Your CD of XP sp2 is an "OEM" version rather than a retail version, but if you have the correct key, it works perfectly.  The problem with OEM installations, is that they are linked to the computer on which they were first installed... then once installed, it cannot be installed on another computer (and replace the motherboard is considered as "another computer").

  Service Pack 3 is available for download and will continue to be available in the foreseeable future.  If you have a new installation using the SP2 CD, download you the sp3 and install it manually (you must have sp3 before Windows Update will strive to give you the post-sp3 updates).

  That said, it is easy to create an installation cd of sp3 by a process called "slipstreaming".  You can do it yourself, but any competent computer technology needs to know how to do it.  See http://www.bleepingcomputer.com/tutorials/slipstreaming-windows-xp-to-create-bootable-cd/

  You can even create an installation CD which includes sp3 as well as all the critical updates that came after sp3.  See http://xdot.tk/

  There are a few caveats to keep in mind before installing sp3:

  Before installing sp3, read this article--> http://support.microsoft.com/kb/950717

  If your PC is a HP Pavilion and Presario Media Center and has an AMD processor, this hotfix must be installed before installing sp3-->

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?CC=UK&LC=en&DLC=en&softwareitem=PV-60484-2

  Install SP3 for download--> http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=24

  ignore the text which says that it is for network installations and also ignore the text informing Windows/Microsoft Update If a single update of a PC.

  Regarding the use of sfc/scannow command which will require an installation CD is the same service pack that is installed on the computer, BUT using sfc/scannow almost certainly NOT help you in any difficulty that you are likely to encounter.  Despite the many Web sites that you can see who is advised to use this command, simply is not what people think than that, at least for XP.

• How can I run sfc or sfc.exe in windows XP SP3

  Windows XP SP3, media edition ver 2002

  PAM open window has reported the problems with system files

  pre-loaded Dell software, do not have the disc cd XP 2 Professional asked for installation in the cd player.

  I have the dell disk operating system and drivers and disk utitilies.

  I would like to launch sfc to find the problem, then run sfc/scannow to try to resolve the problem.

  I can do in the immediate window, or should I open the cmd prompt, or make some time at startup to perform

  correction action? Hope my question is simple, appreciate all the help I'm not safe and does not want to

  create more problems. Thank you

  mojo_bb

  Hello

  Let us first start the sfc scan and check if there are any file system corruption.
  a. to do this, click Start, click programs, accessories principally made, right click Guest and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
  b. type the following command and press ENTER:
  sfc/scannow
  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.
   
  More information on SFC scan found in this document:
  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
  http://support.Microsoft.com/kb/310747