SGL and variable U32 are wired to same variable DBL through the structure of the case, block data poster SGL DBL during case U32.
Hello
Here, I have attached an example, similar code module is used in our project.
In this example in the control of two structures business SGL and U32 panels is directly related to the signpost DBL. If I give 4294967295(U32 value of maximum range in the case of forgery under the example) its display 4294967296.
Please give me the solution to show the correct value of U32 in signpost DBL.
Thank you
Wherry
In your code, 4294967295 is first converted to the SGL (on the edge of the box structure), then to the DBL. But this value may not be exactly converted SGL (due to lack of significant digits).
You should convert the SGL DBL value in the case of true.
Tags: NI Software
Similar Questions
-
Colormunkie Photo printer profile (*.) ICM and *. ICC) are not seen by LR4.2 in the Print Job section
I used Colormunkie Photo to create a. ICM file for printer calibration. Faulty when I tried to change the suffix to. ICC under any circumstances he LR4.2 view the file in the menu to select the printer profile. There are several folders display with two suffixes but no printer to all files. I tried three times unsuccessfully and cannot think of anything else to try. The first two were the same. I varied the creating file name suffix in the third. Help will be appreciated. My OS is Windows 7 ultimate SP1 HP laserjet 2550 L printer.
Only profiles with the RGB color space appear, with CMYK color space profiles are not displayed and cannot be used by LR.
-
I can't reactivate my e-reader with my existing Adobe ID and password which are both correct. I alwayss get the message "the server activation Code error: E_AUTH_NOT_READY" what kind of problem is this and what is more important, how can I resolve it quickly. I'm on vacation and you want to read. Thanks for the quick response.
Yes, actually I talk about digital editions. Do you know how to solve the problem, as stated in my first mail of Digital Editions? Thank you for your kind cooperation.
-
I'm trying to reduce the amount of space that my Windows 7 backup uses so I've come to the place in Windows 7 backup:
Manage space > view backups...I am then presented a list of three backup sets:
01/03/2012 to 01/04/2012
12/07/2011 to 12/21/2011
23/11/2011 to 30/11/2011I would like to remove the older two, leaving the most recent. However, this doesn't seem to work as expected. If I try to delete one of the two most recent ones (the first two in the list above) I get the following warning "Are you sure you want to delete this backup file.
However, if I try to delete the last one in the list, I get a slightly different error "Are you sure you want to remove the most recent data of the file backup?"-sounds strange because it is clearly not the most recent backup according to the dates it's show.
Of course, I can go ahead and ignore the warnings, but I fear that maybe there are some files in the last backup the value in the list that may not be right more recent set backs.
In 2011, I thought this might be something wrong with the date formats vs US UK (I am in England so the above dates are in dd/mm/yyyy format and not in jj/mm/aaaa) - but now it's 2012 and I backup from 2012 and 2011 games and he always seems to think that the oldest backup of 2011 is the most recent.
Any ideas? Can I delete the oldest backup sets (that is, the two that are from 2011) safely?
Any help much appreciated - thank you.
Simon
Update: I checked on other PCs in the office and the situation is the same - is not only something strange on a PC.
-
What is the process of transition of 10.6.8 to 10.8.5. After I bought, what I see at $19.99 do I look and what I would do. Please guide me through the process
After the redemption code was sent to you, back up your data, check your applications for compatibility, open the Mac App Store, go to its home page, use the code, wait for Setup to finish downloading (it will take at least a few hours) and follow the instructions on the screen.
(138473)
-
Audio and video not synchronized. Returned to previously published projects and they also now not synced. What could be the problem?
Figured that generator out of sync unplugged. Thank you
-
extraction of XML in process variables: (no not the case)
Hello
I have a process that takes xml as input data and it must extract the data in process variables, I created. For this I used setvalue processes, where the input parameter is of type xfaform. For this variable, I gave the form as the url of the model (I tried both pdf and the xdp). It loads the schema so file when I checked in the settings of schema. I traced this value (one of the objects in xml) to an another process in the setvalue parameter variable. When I run this process, I don't see the value of the XML object is assigned to the process variable.
The process is not any mistakes out there. I checked the records as well. I don't know what Miss me in the mappings. I use version 8.2. I have attached ACL that contains the processes and resources. Your help will be very appreciated.
Thank you
Chaitanya
I gave the pdf as a reference model to the xfaform variable. So, will receive navigate the XPath for companyname, it takes thatpath.
You might be able to break through to the node you want to in xPath Builder, it does not mean that the xPath expression will work based on the data you will receive. You must ensure that you send other xdp data that the xPath will not work.
Send by email button submit xdp data. Just xml. The difference is that data xdp encapsulates the XML with data/data/xdp tags. What you see when you get off using xPath for an xfaForm variable Designer.
I think you have two options:
1 use a normal submit button, set the data to submit to the XDP data and submit URLs using the MAILTO Protocol.
2 - having an input xml variable and change your XPath to match the structure of the xml file you will receive.
Jasmine
-
I have a Vista Home Premium computer laptop (Toshiba Satellite) which shows strange lines and brands for all of the words on the desktop and menus. I guess it could be a different language, although it looks more like mutilated. I managed to check the regional/language settings (was not easy) and English is selected. Anyone know what is happening and how to fix this without reloading the operating system?
Hello toryander,.
Thanks for posting on the Microsoft answers Community Forum.
When the problem started happening with the display of strange symbols and marks in your Vista Home Premium?
What has changed in your environment? Did you install a new program or install an update from Windows?Have you tried running Safe Mode to see if it'll happen here?
If you know when the problem started, you can check and see if you have the system restore back to an earlier point in time. Note: System Restore does not save or delete your personal documents. This means that a document created and saved today is not deleted if you use the system restore. Only some system files and settings are changed when you perform a system restore.
Click the URL below to review the steps on the system restore.
936212 KB - how to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
http://support.Microsoft.com/kb/936212 use system restore to undo changes
To be sure, save the files before you restore to an earlier point. To restore your system to a previous restore point:- Click Start
- Point to all programs
- Point to Accessories
- Point to System Tools
- Click on the system restore and click on the Next button
- Select "choose a different restore point" and click the Next button
- Select the time of the desired date and restore point description.
- Click the Next button.
- Click Next to start the restore process.
- Click Yes in the confirmation message box that appears.
The computer shut down and on again automatically once the recovery is complete.
Please try the suggestions and reply back with the results and let us know if you need help or if this solves your problem.
Sincerely,
Marilyn
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
I build a script to generate auto magicly VM when I have import information from a csv file. I have the latest PowerCli, I am trying to build servers r2 Sever 2012 model. I tried several OsCustomizationSpec (OCS) of in the hope of getting something to work, but I had no luck so far. In VCenter, it shows that it applies the OCS, but is not apear to have an impact on the server. I have disabled UAC since the last time that I tried it so maybe that will make a difference. I am under ESXi 5.1 update 2, just to try to give all the necessary information. Ideally, I'd like Sysprep, the value of intellectual property, change the computer name and join the server to the domain. That's all! lol I have the book "VMware vSphere PowerCLI Reffernece, automating vSphere Administration, I walked through step by step. The new version of PowerCli seems not have the x 86 limitation as earlier versions of PowerCli. I tried so many different things, I'm not sure what to put in place as a starting point.
# Save the object credentials with permission to join the domain.
$DomainCredentials = get-Credential "domain\testername."
# Clone our Spec by adding the domain information.
$Spec = get-OSCustomizationSpec "Windows Server 2012 R2"
$Spec += get-OSCustomizationNicMapping - Spec $Spec
#$Spec | Select *.# Get our VM
# Change network settings
Get - VM BigServername | Get-NetworkAdapter | Together-NetworkAdapter - NetworkName nic - 172.16.25 - VLAN225 - connected: $true '
-Confirm: $false | out-null
# Close the comments to make change.
Stop-VMGuest - VM $VM - confirm: $false | out-null
# Wait while feedback stops
While ($vm. ExtensionData.Runtime.PowerState - not "poweredOff")
{
Start-Sleep - seconds 1
$vm. ExtensionData.UpdateViewData ('Runtime.PowerState')
}
# Apply Spec customization to apply the new network settings
Get - VM "BigServername" |
Set-VM - OSCustomizationSpec "R2 Windows Server 2012" - confirm: $false |
Start-VMI can rebuild the model, or something else, we must do this work.
OR - is simply not the best way to configure the VM? If not, what Sysprep?
Good news, but first, I would really like to know where the log files are on which server to the OsCustomization process.
I decided to reverse engineer and create a CSOS within vCeneter and once I got to work, I kept creating new CSO via PowerCli until I could get that to work, create a new virtual machine. Once I got this to work, I have tryied to apply on a cloned vm, with no parameters. I got it works too. I tried to go back to my original image, but I couldn't get this to work. Something's wrong with this picture. He wrath that the problem was related to the permissions on the local client.
New OSCustomizationSpec - OrgName company OSType - Windows - ChangeSid-Server "vcenter.dom.com" - name PowerCliOnly4 - persistent administrator-Type FullName - AdminPassword! password123 - zone "Eastern (USA and Canada)" AutoLogonCount - 3 - domain dom dadmin - DomainUsername - DomainPassword! password123 NamingScheme - vm-Description "PowerCli Use only" - confirm: $false
Get-OSCustomizationNicMapping - OSCustomizationSpec PowerCliOnly4 | Game-OSCustomizationNicMapping - Position 1 - IpMode UseStaticIP - IpAddress 10.10.10.98 - 255.255.255.0 - DefaultGateway 10.10.10.1 Dns subnet - mask "10.10.10.10","10.10.10.11" "-confirm: $false
This seems to be very picky. Because the area is one of the parameters, you cannot put it in the DomainUsername, no dom\dadmin. The part that I really want to know how to get more, is what happens if your vm has a different local administrator as the administrator account. It turns out that FullName - is not the account that it to connect locally with tires. When I created the vCenter Medtronic Chondroitin, I put 'me' in the name and information of the Organization and that's what was settled in the FullName property:
Name: PowerCliOnlyM
Type: persistent
ServerId: /VIServer = dom\[email protected]: 443.
Server: vcenter.dom.com
LastUpdate: 24/09/2014 13:33:19
DomainAdminUsername: dadmin NO dom/dadmin here!
DomainUsername: dadmin
Description: PowerCli use only, done manually in vCenter.
AutoLogonCount: 3
ChangeSid: true
DeleteAccounts: false
DnsServer:
DnsSuffix:
Domain: vsi
Full name: me
GuiRunOnce:
NamingPrefix:
NamingScheme: Vm
OrgName: CompanyTU
OSType: Windows
ProductKey:
Time zone: (USA and Canada)
Working Group:
LicenseMode: NotSpecified
LicenseMaxConnections:
EncryptionKey: {-126, 3, 48, 108...}
ExtensionData: VMware.Vim.CustomizationSpecItem
ID: PowerCliOnlyM
UID: /VIServer = vsi\[email protected]: 443/OSCustomizationSpec = PowerCliOnlyM /.
Client: VMware.VimAutomation.ViCore.Impl.V1.VimClient
AdminPassword: w
DomainAdminPassword: N
DomainPassword: NDNS: {10.10.10.10, 10.10.10.11}
Wins :
SpecId: PowerCliOnlyM
Spec: PowerCliOnlyM
SpecType: persistent
NetworkAdapterMac:
Position: 1
IPMode: UseStaticIP
IP address: 10.10.10.98
Subnet mask: 255.255.255.0
DefaultGateway: 10.10.10.1
AlternateGateway:
VCApplicationArgument:
ID: /VIServer = dom\[email protected]: 443/OSCustomizationNicMapping = OSCustomizationNicMappingImpl-PowerCliOnlyM-persistent-1.
UID: /VIServer = dom\[email protected]: 443/OSCustomizationNicMapping = OSCustomizationNicMappingImpl-PowerCliOnlyM-persistent-1.
ExtensionData: VMware.Vim.CustomizationAdapterMapping
Client: VMware.VimAutomation.ViCore.Impl.V1.VimClient
Version: 1I think that it is good to know that the virtual machine reboot 4 or 5 times as it goes through this process. It breaks is you try and do something for the virtual machine that interrupt the process. I don't know that I'll think more questions in a second.
In addition, it cost he had some problems with the put between quotation marks, single or double around the password, but I did not check this again, I just know that once I took them, he began to work. I ran on other issues while testing as I was using a single IP address, so if I do not disable the test VM, the following would not work because of the conflct network, maybe I shouldn't admit that... lol
-
I use a blank publication widget to create navigation for my site. For some reason I can't change the 'Normal' view it always default Active which in turn messes everything I'm doing.
Rain
Hi rain-Line,.
When you select the trigger/target in the composition that it always by default moves to the active state, you must manually select the normal state in the States Panel and then apply the changes.
Kind regards
Akshay
-
As above
Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud
-Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
-https://helpx.adobe.com/creative-cloud/help/sign-in-out-activate-apps.html
-http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
-https://helpx.adobe.com/x-productkb/policy-pricing/activate-deactivate-products.html
-
Wiring to something not visible in the current block diagram view
My entire block diagram is not visible without scrolling. (I tried to avoid this problem, but it turned out to be impossible). When I try to connect the two together, how to scroll? I have not found a way to do it. Now I'm stuck because I'm unable to wire things that I need to connect because they are not both visible at the same time on the screen to block diagam.
Thanks in advance.
All electrical wiring, if you get your mouse at the edge of the window, she modeling for you. Yes, there are times that you can't keep code to a single screen. I would have preferred the code be clean within a single screen.
-
I am currently getting free creative cloud through University, I attend, but my programs will not open and I don't understand why.
Please visit CC help | 'Renew your membership' window appears when you launch an application Cloud Creative
Concerning
Hervé Khare
-
I wanted to know what trial should I start?
First, ask the teacher for a real program name... not something too vague than "big brother version.
Cloud Plans https://creative.adobe.com/plans
-
1V - 5v linear output using power supply 5v, voltage divider, and variable resistance
How can I get 1v - 5v output linear using power supply 5v, voltage divider, and variable resistance?
Have the you wired as an attachment? Using my schema, you can calculate the current flowing through the pot based on the fall of the tension in the pot
4V / 10Kohm = 0.0004
Kirchhoff's current law, we know that the same current flows through the circuit so now we can calculate the leg below the wall, based on the current and the fall of desired voltage across the resistance
1V / 0.0004 A = 2.5 K Ohm
My scheme maintains the current flowing through the circuit of constant, so the voltage divider must never change. Assuming a linear pot, you will get a swing of such linear voltage as measured at the wiper. If you wired the pot, a different way, then more then likely, you change the total resistance of 5V ground that would have the common effect that would effect the tensions.
Maybe you are looking for
-
A question for the masses... I have a nice 4440 S Probook I bought at a very reasonable price. I upgraded the CPU of the i3 - 3110M for an i7 quad-3632QM stock and factory 4 GB of memory has been upgraded to a 8 GB faster and bigger. That said, I'd L
-
If you have several execution engines installed, the executable will choose correct RTE to work properly? IE @ I have several executables developed using different versions of Labview. The code is locked, so I can't open and save it using the latest
-
Opening mp4 compressed files zip on windows vista
IAM trying to dload a webinar is 55 MB... This is a ZIP compressed mp4... I get a msg of error saying that the file cannot be opened because the file is not supported by my os... I'd like a solution...Thank youChris
-
I try to stick but do not save him?
-
The date still remains correct. In the summer, I recall is that time jumps before 2 hours; in the winter of 3 hours. I used this laptop in Arizona, which does not use DST. A clue?