SH dot11Radio controllers 1 | I win

That means that each of the parameters in the output of the command "sh controllers dot11Radio 1 |" I win ' on Cisco AIR AP1142N-R?

!

AP1-1 #sh controllers dot11Radio 1 | I win

Antenna: internal, Gain: authorized 8, reported 0, use 8

AP1-1 #conf t

Enter configuration commands, one per line.  End with CNTL/Z.

#int AP1-1 (config)

AP1 - 1 (config) #int dot11Radio 1

AP1-1(config-if) #ante

AP1-1(config-if) #antenna gain 6

AP1-1(config-if) #end

AP1-1 #.

AP1-1 #sh controllers dot11Radio 1 | I win

Antenna: internal, Gain: authorized 8, reported 0, configured 12, use 8

AP1-1 #.

AP1-1 #conf t

Enter configuration commands, one per line.  End with CNTL/Z.

AP1 - 1 (config) #int dot11Radio 1

AP1-1(config-if) 6 #no antenna gain

AP1-1(config-if) #end

AP1-1 #sh controllers dot11Radio 1 | I win

Antenna: internal, Gain: authorized 8, reported 0, use 8

AP1-1 #conf t

Enter configuration commands, one per line.  End with CNTL/Z.

AP1 - 1 (config) #int dot11Radio 1

AP1-1(config-if) #antenna gain 6

AP1-1(config-if) #end

AP1-1 #sh controllers dot11Radio 1 | I win

Antenna: internal, Gain: authorized 8, reported 0, use 8

AP1-1 #.

Yes... Internal antennas have a gain and antenna pattern. The antenna gain control does not affect the radio. It is used for information only if you use WLSE/WCS/NCS or first.

Sent by Cisco Support technique iPhone App

Tags: Cisco Wireless

Similar Questions

  • Satellite Pro L40-17b: bus/video audio high def Win XP driver controllers

    Hi, ;)

    Please look at this:
    http://img99.imageshack.us/img99/7296/driversnodig.jpg

    I don't know which one (s) installation (XP):
    Satellite Pro L40-17 b

    Can you help me?

    Friend Sonaya

    Have you installed driver modem?

  • Pavilion laptop 15-p-141ne: audio beats does not not on win 10 pavilion notebook 15-p-141ne

    I have HP pavilion notebook 15-p-141ne, but after that audio 10 beats windows does not work I tried to install the driver of win 8 but little still an error please help

    Hello

    Try the following.

    Download Realtek HD Audio Installer on the link below and save it in your downloads folder.

    http://ftp.HP.com/pub/SoftPaq/sp72001-72500/sp72139.exe

    When finished, press and hold the Windows key and press R

    In the run window, type devmgmt.msc and press to enter.

    In Device Manager, expand sound, video and game controllers.  Right click on the Realtek device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

    When you are finished, download and reinstall the Chipset driver at the following link.

    http://ftp.HP.com/pub/SoftPaq/sp72001-72500/sp72043.exe

    When the reinstallation of Chipset has completed, restart the laptop.

    When windows has reloaded, open your download folder, right click on the installer of Realtek and select "Run as Administrator" to launch the installation.  Once this done, reboot the laptop and let windows load completely for a few minutes before checking.

    Kind regards

    DP - K

  • Accelerometer to win 8.1 vs HP 3D DriveGuard

    Hello

    I have an Envy 17-j013cl that has been recently updated to 8.1 Win. When you start windows, it gives the error of application AccelerometerSt.exe

    "The application was unable to start correctly (0xc000007b). Click OK to close the application. »

    I found this thread hereand I tried to uninstall/reinstall the HP 3D DriveGuard, using the installer found on the site of driver HP here. Whenever I try to install/repair/remove/uninstall, it gives me an error saying

    "Error 1722. There is a problem with this windows package install. A program run as part of the Setup did not finish as expected. Contact your provider to support personal or package. Action RegisterWithWobilityCenterTile64, location:... \MSIF... »

    Notes

    • All updates are verified and installed, both on the HP and Windows update circuit side.
    • BIOS is updated.
    • The F-Prot AV has been installed 8-8.1 took place. It has been deleted.
    • Controllers storage in Device Manager, the only thing is Microsoft storage controller
    • There is an error in the device under the heading of 'other' Manager, simply stating an unknown device.

    It is not a huge problem, just an irritation. That and it's a problem. That needs to be fixed (sorry, fixit-KNOCK light kick). Not sure it should be restoring to windows 8, uninstall F-Prot, install 8.1 method I've seen somewhere.

    Solved!

    I called HP Total Care, who told me that it was a matter of Microsoft Installer. I contacted Microsoft, which after 2 days and 8 hours of troubleshooting, told Microsoft Installer was not the issue and that it was a problem with the HP Driveguard Installer.

    So I called the HP Total Care return and after 3 transfers and half an hour, has been transferred to Ed. My laptop has crossed a third session remotely in as many days and half an hour later, the problem has been found!

    When windows updates to win 8 to 8.1 Win, it removes some of the 'old' redistributed C++ files, rendering 3D guard unfunctionable. Reinstall the Package redistributable Visual C++ 2004 of

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=30679#

    put the missing persons. DLL from the file back and solved the problem.

    Kudos to HP Support! Solved the original Microsoft problem

  • Win 7 USB controller driver for Pavilion 500 - 217

    Hello, I recently spent again PC of my mother to win 8 for Win 7 64 bit. I can't either driver (Intel or AMD) crystallized under drivers available for the controller USB to work. The hardware ID is PCI\VEN_1022 & DEV_7812 & SUBSYS_2AE0103C & REV_03. I also need a driver for the SM Bus controller unless the driver of the usb controller works for both.

    I should be grateful if you would help.

    Thank you...

    Hello:

    Install the AMD Chipset Driver and restart.  You want to download the chipset 49.7 MB file.

    Who should install the two devices.

    http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064

    If it does not install the USB 3 controllers, please install both of these drivers.

    http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5359417 & spf_p.tpst = swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_123787_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

    http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5359417 & spf_p.tpst = swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_118744_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

  • HP Elitebook 8440p: lack of "Audio device high definition '-win 10 (or 7/8/8.1?)

    Hello

    My laptop computer in question is a HP Elitebook 8440p

    Just upgraded to Windows Pro 10 x 64, and I managed to find the drivers for all of them, except a device.

    Under >

    > Sound, video and game controllers

    -"High Definition Audio Device".

    It has a hardware ID of:

    HDAUDIO\FUNC_01 & VEN_8086 & DEV_2804 & SUBSYS_80860101 & REV_1000

    I already tried to install:

    -IDT Audio Drivers

    -LSI High-Definition Audio (HDA) Modem

    -Intel Chipset Installation utility

    None of the foregoing has managed to get rid of the yellow exclamation power off the device under the Device Manager view.

    I had a few other devices where win 10 has not installed by default, and for drivers Win 7 seems to work very well, so I guess that the same is true with the one above - I just need to know what to install...

    Any help would be appreciated.  Thank you.

    Hello:

    You must manually install the audio driver Intel HDMI driver W7 Intel HD graphics support page for your laptop.

    Here is how to do this without messing up your graphics driver...

    First download and install this free utility for files... 1 file on the list is 64-bit.

    http://www.7-zip.org/

    Then, download and save the graphic driver Intel support page for your laptop.  Do not run it.

    http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=4095873 & swItemId = ob_127914_1 & swEnvOid = 4059 #tab1

    After downloading the above driver file, right-click on it and select 7 - zip from the list.

    Have 7-zip extract of: and leave it to decompress the file in the file name (sp64360).

    Once this is done, go to the Device Manager and click on the audio device HD requiring the driver.

    Click the driver tab.  Click on set to update driver.

    Select her browse my computer for driver software option and find the driver 7-zip created folder.

    Make sure that the include subfolders is selected and the driver should install.

    Then restart.

  • HP Slimline 410-010: slimline 410-010 Win 7 drivers

    My grandparents bought a new Slimline machine 410-010, which came with pre-installed Windows 10. They fear and were willing to buy a new machine outright just to go back to Windows 7. I bought a code and already had a disc, so I loaded Windows 7 on the machine. It was an OEM Win 10 machine so without decommissioning was not an option. After completing the installation, I got the yellow exclamation points on the following drivers in Device Manager:

    • Ethernet controller
    • Network controller
    • PCI Simple Communications controller
    • SM Bus controller
    • USB Bus controllers

    I checked the HP website for drivers but was unable to find an any of them for Windows 7. Someone here could point me in the right direction?

    TIA

    Hello:

    See if these drivers work because I can not find all related HP models that have drivers W7 (other than 2 or 3 see you listed).

    SMBus: Install this driver first and then restart.

    https://Downloadcenter.Intel.com/download/20775/Intel-chipset-device-software-INF-Update-utility-?v=t

    Ethernet: 3rd driver on the list.

    http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 13 & PFid = 5 & Level = 5 & Conn = 4 & DownTypeID = 3 & getdown = false

    USB: Download, unzip and run the setup.exe file.

    https://Downloadcenter.Intel.com/download/22824/USB-3-0-driver-Intel-USB-3-0-Extensible-host-controller-driver-for-Intel-8-9-100-series-and-C220-C610-chipset-family?v=t

    Wireless (network controller): I need to view the ID of the hardware for this device, so I know what model wireless card it is.

    To find the hardware ID, go to the Device Manager and click on the network controller.

    Then click on the Details tab in the upper part of the window network controller.

    Now you should see a drop-down list of property and it will be set to the Description of the unit.

    On this list and select the item at the 2nd (hardware ID).

    After the first string of characters you see in the window.

    Simple controller PCI of Communications: give this one a try...

    FTP://ftp.HP.com/pub/SoftPaq/sp65501-66000/sp65854.exe

  • Installation of Win 7 without losing the Toshiba Qosmio G50 applications

    How to get a new install of Windows 7 x 86 running on a Qosmio G50.

    It is assumed that you have a version of Vista x 86 installed.
    First I must say, I'm from the Germany. So, I loaded the drivers on the European side of Toshiba.
    The problem with a new facility is that you lose some applications preinstalled Toshiba as the DVD or Ulead DVD player.

    You can skip these steps if you do not need.

    In the recovery partition, you will find all the files needed for the installation of this software program.

    # Install the Setup Kit automated Windows (Windows AIK). This installs a driver you must mount the image files.
    # Create two directories to join and mount the image.
    # The use of the Witch of the imagex tool is a command line tool, located in the directory your recovery partition tools and explained in the WAIK kit and on the Microsoft Support online help. A good idea is the imagex command /?.
    # Use the imagex tool and join the stormwater management files in the directory root of your recovery partition in a file wim in one of your previously created directories. ------Open the command prompt and use the command: ' imagex/export path\first.swm 2 directory\named.wim banker path\ * .swm "-where first.swm is the file management of rainwater without number, in my case, a file named xxxx.swm. The second file is named xxxx2.swm. 2 is the image to be saved, named.wmi is the name of your attached image file and path\ * .swm is the path to all the files in your directory of recovery stormwater management.
    # Now to mount the wim with the imagex tool file in your directory of a second. ------On the command prompt, use this command: directory of imagex/mount path\name.wmi 1. ------Where path\name.wmi is the path and name of the file created in step four. You have saved the image in step 4, is the only image to mount. Directory is the path to the mountain where you will find the directories for the next steps.
    # Now you will find in this directory a folder Toshiba. Expand this folder, and go to Drivers\BTOAPP. The subfolders contain all the installation files for the applications that you can not download from Toshiba. Record everything you need in a safe place for later use.

    Reverence English for the imagex tool:
    http//technet.Microsoft.com/en-us/library/cc749447 (WS.10) .aspx

    Now, you download the necessary drivers and software side Toshiba and also to store them in a secure location.
    As my G50 comes with two disks, I stocked up on the second disc. You can also use any USB storage device.

    Here is a driver and software registration on the side European Toshiba:
    Reference:
    Type:
    Firma:
    Operating system:
    Version:
    Plot:

    03/12/09
    [http://support1.toshiba-tro.de/tedd-files2/0/bios-20090312131718.zip |] BIOS update]
    [Update of BIOS | http://support1.toshiba-tro.de/tedd-files2/0/bios-20090312131718.zip |] BIOS update]
    Toshiba
    Operating system independent
    2.10 - WIN
    World Wide

    25/11/09
    [http://support1.toshiba-tro.de/tedd-files2/0/bltstk-20070724121132.html |] Bluetooth Stack]
    [Bluetooth Stack | http://support1.toshiba-tro.de/tedd-files2/0/bltstk-20070724121132.html |] Bluetooth Stack]
    Toshiba
    Operating system independent
    NA
    World Wide

    29/10/09
    [| http://support1.toshiba-tro.de/tedd-files2/0/carc-20091029152226.zip |] Controller Card Reader]
    [Card reader controller | http://support1.toshiba-tro.de/tedd-files2/0/carc-20091029152226.zip |] Controller Card Reader]
    Ricoh
    Windows 7-32 Bit
    2.07.01.00
    World Wide

    29/10/09
    [| http://support1.toshiba-tro.de/tedd-files2/0/csutil-20091029143932.zip |] Chip Set Utility]
    [Chip Set Utility | http://support1.toshiba-tro.de/tedd-files2/0/csutil-20091029143932.zip |] Chip Set Utility]
    Intel
    Windows 7-32 Bit
    9.1.1.1015
    World Wide

    29/10/09
    [| http://support1.toshiba-tro.de/tedd-files2/0/confree-20091029152455.zip |] Config Free]
    [Config Free | http://support1.toshiba-tro.de/tedd-files2/0/confree-20091029152455.zip |] Config Free]
    Toshiba
    Windows 7-32 Bit
    8.0.23
    World Wide

    11/09/09
    [| http://support1.toshiba-tro.de/tedd-files2/0/dpuct-20091030104746.zip | the DVD Player update checker]
    [Check the DVD Player update tool | http://support1.toshiba-tro.de/tedd-files2/0/dpuct-20091030104746.zip | the DVD Player update checker]
    Toshiba
    Windows 7-32 Bit
    2.50.0.11
    World Wide

    29/10/09
    [| http://support1.toshiba-tro.de/tedd-files2/0/display-20091029144316.zip |] Display Driver]
    [Display driver | http://support1.toshiba-tro.de/tedd-files2/0/display-20091029144316.zip |] Display Driver]
    nVidia
    Windows 7-32 Bit
    8.15.11.8642
    World Wide

    29/10/09
    [| http://support1.toshiba-tro.de/tedd-files2/0/fp-sw-20091029152714.zip |] Fingerprint Software]
    [Fingerprint Software | http://support1.toshiba-tro.de/tedd-files2/0/fp-sw-20091029152714.zip |] Fingerprint Software]
    Toshiba
    Windows 7-32 Bit
    1.0.2.12
    World Wide

    29/10/09
    [| http://support1.toshiba-tro.de/tedd-files2/0/fsu-20091029152418.zip |] Fingerprint Software Uninstaller]
    [Fingerprint Software Uninstaller | http://support1.toshiba-tro.de/tedd-files2/0/fsu-20091029152418.zip |] Fingerprint Software Uninstaller]
    Toshiba
    Windows 7-32 Bit
    1.0.0.0
    World Wide

    30/01/09
    [| http://support1.toshiba-tro.de/tedd-files2/0/frmwre-20090130144458.zip | Firmware Update]
    [Firmware update | http://support1.toshiba-tro.de/tedd-files2/0/frmwre-20090130144458.zip | Firmware Update]
    TEAC
    Operating system independent
    7.0/7.1 D D
    World Wide

    29/10/09
    [| http://support1.toshiba-tro.de/tedd-files2/0/gestctrl-20091029152829.zip | gesture Controller]
    [Gesture controller | http://support1.toshiba-tro.de/tedd-files2/0/gestctrl-20091029152829.zip | gesture Controller]
    Toshiba
    Windows 7-32 Bit
    1.27.3044.90803
    World Wide

    29/10/09
    [| http://support1.toshiba-tro.de/tedd-files2/0/gvl-20091029153004.zip | graph library]
    [Graphic Video Library | http://support1.toshiba-tro.de/tedd-files2/0/gvl-20091029153004.zip | graph library]
    Toshiba
    Windows 7-32 Bit
    2.2.0.3
    World Wide

    29/10/09
    [| http://support1.toshiba-tro.de/tedd-files2/0/hdc-20091029153057.zip |] Console HD]
    [HD console | http://support1.toshiba-tro.de/tedd-files2/0/hdc-20091029153057.zip |] Console HD]
    Toshiba
    Windows 7-32 Bit
    1.0.8.3
    World Wide

    29/10/09
    [| http://support1.toshiba-tro.de/tedd-files2/0/hdpd-20091029153241.zip | processor HD driver]
    [HD processor driver | http://support1.toshiba-tro.de/tedd-files2/0/hdpd-20091029153241.zip | processor HD driver]
    Toshiba
    Windows 7-32 Bit
    1.0.2.71
    World Wide

    29/10/09
    [| http://support1.toshiba-tro.de/tedd-files2/0/hdmicm-20091029143829.zip |] [HDMI Control Manager]
    [HDMI Control Manager | http://support1.toshiba-tro.de/tedd-files2/0/hdmicm-20091029143829.zip |] [HDMI Control Manager]
    Toshiba
    Windows 7-32 Bit
    2.0.0.1
    World Wide

    29/10/09
    [| http://support1.toshiba-tro.de/tedd-files2/0/irda-20091029153518.zip |] Infrared driver]
    [Infrared driver | http://support1.toshiba-tro.de/tedd-files2/0/irda-20091029153518.zip |] Infrared driver]
    Winbond Electronics Corp.
    Windows 7-32 Bit
    8.60.2001
    World Wide

    29/10/09
    [| http://support1.toshiba-tro.de/tedd-files2/0/mdm-20091029153401.zip |] Driver Modem]
    [Driver modem | http://support1.toshiba-tro.de/tedd-files2/0/mdm-20091029153401.zip |] Driver Modem]
    Toshiba
    Windows 7-32 Bit
    2.2.97
    World Wide

    29/10/09
    [| http://support1.toshiba-tro.de/tedd-files2/0/regpatch-20091029153327.zip |] Registry Patch]
    [Registry Patch | http://support1.toshiba-tro.de/tedd-files2/0/regpatch-20091029153327.zip |] Registry Patch]
    Toshiba
    Windows 7-32 Bit
    1.2
    World Wide

    29/10/09
    [| http://support1.toshiba-tro.de/tedd-files2/0/regpatch-20091029153134.zip |] Registry Patch]
    [Registry Patch | http://support1.toshiba-tro.de/tedd-files2/0/regpatch-20091029153134.zip |] Registry Patch]
    Toshiba
    Windows 7-32 Bit
    1.0
    World Wide

    29/10/09
    [| http://support1.toshiba-tro.de/tedd-files2/0/robson-20091029144229.zip |] Robson package]
    [Package Robson | http://support1.toshiba-tro.de/tedd-files2/0/robson-20091029144229.zip |] Robson package]
    Intel
    Windows 7-32 Bit
    1.10.0.1012
    World Wide

    29/10/09
    [| http://support1.toshiba-tro.de/tedd-files2/0/sound-20091029151953.zip |] Sound Driver]
    [Driver sound | http://support1.toshiba-tro.de/tedd-files2/0/sound-20091029151953.zip |] Sound Driver]
    Realtek Semiconductor Corporation
    Windows 7-32 Bit
    6.0.1.5904
    World Wide

    29/10/09
    [| http://support1.toshiba-tro.de/tedd-files2/0/stormng-20091029144013.zip |] [Storage Manager]
    [Storage Manager | http://support1.toshiba-tro.de/tedd-files2/0/stormng-20091029144013.zip |] [Storage Manager]
    Intel
    Windows 7-32 Bit
    8.9.0.1023
    World Wide

    29/10/09
    [| http://support1.toshiba-tro.de/tedd-files2/0/tv-tuner-20091029153805.zip |] TV Tuner]
    [TV Tuner | http://support1.toshiba-tro.de/tedd-files2/0/tv-tuner-20091029153805.zip |] TV Tuner]
    Yuan
    Windows 7-32 Bit
    2.3.3.31
    World Wide

    29/10/09
    [| http://support1.toshiba-tro.de/tedd-files2/0/vap-20091029153432.zip | value added package]
    [Value added Package | http://support1.toshiba-tro.de/tedd-files2/0/vap-20091029153432.zip | value added package]
    Toshiba
    Windows 7-32 Bit
    1.2.28
    World Wide

    29/10/09
    [| http://support1.toshiba-tro.de/tedd-files2/0/webcam-20091029143732.zip | driver Webcam]
    [Driver Webcam | http://support1.toshiba-tro.de/tedd-files2/0/webcam-20091029143732.zip | driver Webcam]
    Chicony
    Windows 7-32 Bit
    1.7.267.0803
    World Wide

    13/11/09
    [| http://support1.toshiba-tro.de/tedd-files2/0/wlesslan-20091112152016.html |] Wireless Lan Driver]
    [Wireless Lan Driver | http://support1.toshiba-tro.de/tedd-files2/0/wlesslan-20091112152016.html |] Wireless Lan Driver]
    (NA)
    Windows 7-32 Bit
    n/a
    World Wide

    Please update your BIOS to the latest revision.

    You are now ready for a new installation of Windows 7, in this case a ultimate 32 bit Version. Insert the DVD and restart. Chose to boot from the DVD drive. Create partitions and reformat your drive system as agreed. Follow the instructions for installation of the configuration. The installation program will recognize the basic in your system as device SATA features, network controllers, and USB ports. Once the installation is finished, you have a lot of work for laptop.

    Now install the new drivers in the following order:

    [| http://support1.toshiba-tro.de/tedd-files2/0/csutil-20091029143932.zip |] Chip Set Utility]
    [Chip Set Utility | http://support1.toshiba-tro.de/tedd-files2/0/csutil-20091029143932.zip |] Chip Set Utility]

    [| http://support1.toshiba-tro.de/tedd-files2/0/bltstk-20070724121132.html |] Bluetooth Stack]
    [Bluetooth Stack | http://support1.toshiba-tro.de/tedd-files2/0/bltstk-20070724121132.html |] Bluetooth Stack]

    [| http://support1.toshiba-tro.de/tedd-files2/0/carc-20091029152226.zip |] Controller Card Reader]
    [Card reader controller | http://support1.toshiba-tro.de/tedd-files2/0/carc-20091029152226.zip |] Controller Card Reader]

    [| http://support1.toshiba-tro.de/tedd-files2/0/dpuct-20091030104746.zip | the DVD Player update checker]
    [Check the DVD Player update tool | http://support1.toshiba-tro.de/tedd-files2/0/dpuct-20091030104746.zip | the DVD Player update checker]

    [| http://support1.toshiba-tro.de/tedd-files2/0/display-20091029144316.zip |] Display Driver]
    [Display driver | http://support1.toshiba-tro.de/tedd-files2/0/display-20091029144316.zip |] Display Driver]

    [| http://support1.toshiba-tro.de/tedd-files2/0/hdpd-20091029153241.zip | processor HD driver]
    [HD processor driver | http://support1.toshiba-tro.de/tedd-files2/0/hdpd-20091029153241.zip | processor HD driver]

    [| http://support1.toshiba-tro.de/tedd-files2/0/hdc-20091029153057.zip |] Console HD]
    [HD console | http://support1.toshiba-tro.de/tedd-files2/0/hdc-20091029153057.zip |] Console HD]

    [| http://support1.toshiba-tro.de/tedd-files2/0/hdmicm-20091029143829.zip |] [HDMI Control Manager]
    [HDMI Control Manager | http://support1.toshiba-tro.de/tedd-files2/0/hdmicm-20091029143829.zip |] [HDMI Control Manager]

    [| http://support1.toshiba-tro.de/tedd-files2/0/irda-20091029153518.zip |] Infrared driver]
    [Infrared driver | http://support1.toshiba-tro.de/tedd-files2/0/irda-20091029153518.zip |] Infrared driver]

    [| http://support1.toshiba-tro.de/tedd-files2/0/mdm-20091029153401.zip |] Driver Modem]
    [Driver modem | http://support1.toshiba-tro.de/tedd-files2/0/mdm-20091029153401.zip |] Driver Modem]

    [| http://support1.toshiba-tro.de/tedd-files2/0/sound-20091029151953.zip |] Sound Driver]
    [Driver sound | http://support1.toshiba-tro.de/tedd-files2/0/sound-20091029151953.zip |] Sound Driver]

    [| http://support1.toshiba-tro.de/tedd-files2/0/tv-tuner-20091029153805.zip |] TV Tuner]
    [TV Tuner | http://support1.toshiba-tro.de/tedd-files2/0/tv-tuner-20091029153805.zip |] TV Tuner]

    [| http://support1.toshiba-tro.de/tedd-files2/0/webcam-20091029143732.zip | driver Webcam]
    [Driver Webcam | http://support1.toshiba-tro.de/tedd-files2/0/webcam-20091029143732.zip | driver Webcam]

    [| http://support1.toshiba-tro.de/tedd-files2/0/wlesslan-20091112152016.html |] Wireless Lan Driver]
    [Wireless Lan Driver | http://support1.toshiba-tro.de/tedd-files2/0/wlesslan-20091112152016.html |] Wireless Lan Driver]

    [| http://support1.toshiba-tro.de/tedd-files2/0/regpatch-20091029153327.zip |] Registry Patch]
    [Registry Patch | http://support1.toshiba-tro.de/tedd-files2/0/regpatch-20091029153327.zip |] Registry Patch]

    [| http://support1.toshiba-tro.de/tedd-files2/0/regpatch-20091029153134.zip |] Registry Patch]
    [Registry Patch | http://support1.toshiba-tro.de/tedd-files2/0/regpatch-20091029153134.zip |] Registry Patch]

    [| http://support1.toshiba-tro.de/tedd-files2/0/vap-20091029153432.zip | value added package]
    [Value added Package | http://support1.toshiba-tro.de/tedd-files2/0/vap-20091029153432.zip | value added package]

    If you want to use a Media for the Media Center Extender, installing fingerprint software to get the driver for the sensor and uninstall it. This software prevents the Extender to connect to your media library.

    Now, install the applications according to the needs in alphabetical order. You'll miss the DVD player. Do not install from your old sources, it will fail. Download and install it to a Satellite Pro S300. Then, run the update DVD player check tool. This will take you to a download from Toshiba. Download and install this, it's a silent installation. After, you have a HD DVD player using the HD processor and the switch "upconvert".

    WOW! Very useful and long display
    I think it may be very interesting for others with Qosmio G50 unit.

    Thanks for sharing this with us!

  • Satellite R630 - problems of Driver on Win 7 64 bit after SP1 update

    That need your help here guys.

    My R - 630 Satellite is less than a year, under a Windows 7 Home Premium 64 - bit. For awhile, I've known BSOD, which I traced him through the observer of events here: http://technet.microsoft.com/en-us/library/dd337789 (WS.10) .aspx

    This has not led me far enough.
    Finally, I have found through other forums that the SP1 update would solve some of the annoying problems BSOD and I started the download and upgrade. However, when the computer reboots, while my laptop seems to have been healed (so far) of the BSOD, I have problems with drivers for:

    -Sound card
    -USB controllers
    -DVD player
    -Webcam
    -Bus enumerators

    I downloaded the indicated Win 7-64 bit drivers in each case. I tried to install the first. Nothing happened. I uninstalled the existing and installed new drivers. Nothing happened again.

    I thought I should do things in the right order.
    So I tried to install
    (1) the Chip Set Utility (drivers?) first, then
    (2) the USB drivers
    (3) sound card drivers etc.

    Nothing happens not always.

    I'm running out of ideas here.

    PS while other drivers run very well when I extracted the .zip format, the sound card driver, refused to run, even if the box "run command" has been checked when executing the .msi file.
    I've pulled into a folder and ran it manually.

    Still did not help.

    Hello

    What happens if you set the Windows operating system to the point before the SP1 has been installed?
    That you get the BSOD?

    I would recommend this doing.
    Use the Windows option that allows you to activate the operating system at the point of time at the beginning.
    Then, test the functionality of the OS.

    If everything works correctly, update the Win 7 64 bit with SP1.
    You must use the automatic update of Windows 7.

  • Compaq presario m2000: video controller for win 7 [bit]

    I have compaq presario m2000 laptop I upgraded from win xp to win 7 (32 bit) I miss the video controller.

    Hello:

    You must manually install the driver Windows XP to get the graphics to work.

    You will not have Windows Aero because the Intel graphics card that has your laptop does not support Aero.

    Download and run this driver.  Conclusion of any windows error that can occur.

    This contains the Windows XP driver for the Intel 82852/82855 GM/GME Graphics controllers in the listed notebook models.

    File name: sp28484.exe

    Go to Device Manager and click on the video controller needing drivers.  Click the driver tab.  Click on set to update driver.

    Select travel it my computer for the software driver and then at the bottom of this list option, click Let me pick from a list of drivers for devices on my computer.

    Click on disk, then go to: C:\SWSetup\sp28484\ialmnt5 and select the Intel (r) 82852/82855 GM/GME Graphics Controller in the list and see if the pilot goes like this.

    Then reboot and you should be able to change the screen resolution.

  • HP 15 PC 15-go65NL K3F88EA: decommissioning of the problems of w8.1 for win 7 - 15 15-go65NL K3F driver PC portable Hp problems

    Hello

    I have a 15 HP computer pc laptop 15-go065NL PN K3F88EA for personal problems I lowered for Windows 8.1 upward for Win 7 64 bit and I had problems with the USB.

    It seems that after that the OS without decommissioning the USB ports are not more work.

    With 8.1 win all the USB worked, with Win 7.1 I have the uSB 3.0 working wile the two USB ports do not work.

    I have these errors in Device Manager:

    -controller pci crittografy

    -Manager of system bus controllers

    -Ethernet controller

    -USB controller

    Thease are the HW ID_VEN and the hardware ID.

    VEN_1022 & DEV1537 for crittography

    VEN_1022 & DEV7814 for USB

    VEN_1022 & DEV1537 Ethernet

    VEN_1022 & DEV1537 Manager of bus system

    Please help me and thanks in advance for your support

    Thanks - paoform

    Hello:

    Please see this related post.

    http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/missing-drivers-unknown-device-HP-15-g207ax/m-p/4818539/highlight/true#M277090

    For the ethernet controller, download and install the driver for the second on the list.

    http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=14&PFID=7&level=5&Conn=4&DownTypeID=3&GETDOWN=false

  • HP Pavilion 400-224 - Win 7 32 bit driver for USB

    A client asked me to load Win 7 Home Premium, 32-bit on his CV 400 - 224 office so that it can run some software owners.  I have loaded the operating system, but could not find the 32 bit drivers for the USB 3.0 hardware.  HP driver is 64-bit only.  The Intel driver for 32-bit file generates an error "your system does not have the minimum requirements.

    This looks like a Council of the laptop. Are there other HP desktop computers or laptops to this use this advice might have the correct 32-bit driver on the HP.COM web site?

    Hello:

    This model has an AMD processor and chipset specifications...

    http://support.HP.com/us-en/document/c04078971

    Here's the W7 32 bit graphic chipset and usb 3 drivers you need...

    Download and install the AMD Chipset drivers and reboot.  You want the first file on the Web page.

    To install the smbus and usb 3 controllers.

    http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2032

    Graphics card:

    http://support.AMD.com/en-us/download/desktop?OS=Windows%207%20-%2032#AMD-catalyst-packages

    If the amd chipset driver does not install the usb controllers as advertised 3 that he would, and then download and install these two...

    http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5359417&SP...

    http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5359417&SP...

  • 15 D012SL | Win 7 x 64 drivers

    Hi all! I'm new here and I have a problem with a laptop HP (15-D012SL):
    I've downgraded to win 8 for Win 7 and it does not recognize the 2 devices.
    The first is the BUS CONTROLLER, and the second is a USB CONTROLLER. In the model support page, there is a driver for Win 7, but not all! Can you help me find the missing drivers? Thank you all!

    Hello:

    See if it works for you...

    First install the amd chipset drivers and reboot.  You want the first file on the Web page.

    This will install the smbus and usb 3 controllers.

    http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064

    Then, install the beta amd radeon catalyst graphics driver.

    http://support.AMD.com/en-us/KB-articles/pages/latest-catalyst-Windows-Beta.aspx

    If the amd chipset driver does not install the usb controllers as advertised 3 that he would, and then download and install these two...

    http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5359417&SP...

    http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5359417&SP...

  • Downgraded 8.1 Win to Win 7 but I need help

    Hello

    I have HP Pavilion Notebook of 17-e184ca which it came with Win 8.1 but I need to use Windows 7 for my plotter which he did not win 8 driver. I demoted the windows 7 almost everything is working well, but missing even a few drivers. Who's the usb driver that I need to understand.

    Could someone help me find drivers for win 7?

    A USB 3.0 device ID

    PCI\VEN_1022 & DEV_7814 & SUBSYS_1985103C & REV_09
    PCI\VEN_1022 & DEV_7814 & SUBSYS_1985103C
    PCI\VEN_1022 & DEV_7814 & CC_0C0330
    PCI\VEN_1022 & DEV_7814 & CC_0C03

    Bluetooth controller

    PCI\VEN_1814 & DEV_3298 & SUBSYS_18EC103C & REV_00
    PCI\VEN_1814 & DEV_3298 & SUBSYS_18EC103C
    PCI\VEN_1814 & DEV_3298 & CC_0D1100
    PCI\VEN_1814 & DEV_3298 & CC_0D11

    PCI device

    PCI\VEN_10EC & DEV_5229 & SUBSYS_1985103C & REV_01
    PCI\VEN_10EC & DEV_5229 & SUBSYS_1985103C
    PCI\VEN_10EC & DEV_5229 & CC_FF0000
    PCI\VEN_10EC & DEV_5229 & CC_FF00

    SM Bus controller

    PCI\VEN_1022 & DEV_780B & SUBSYS_1985103C & REV_16
    PCI\VEN_1022 & DEV_780B & SUBSYS_1985103C
    PCI\VEN_1022 & DEV_780B & CC_0C0500
    PCI\VEN_1022 & DEV_780B & CC_0C05

    Unknown device

    ACPI\HPQ6007
    * HPQ6007

    Thank you

    Hello:

    Download and install the amd chipset driver and restart.  You want the first file on the Web page.

    Who will install the smbus controller.  It would also have installed the usb controllers 3 too.

    http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064

  • dual boot xp on win 7

    Got a 8440p with win 7 installed ultimate (64-bit) elitebook made the partition and went to install XP pro (32 bit) (I need it to work)

    He would not move because of the sata drive, under the direction of the computer local geek (I am a novice), I pass the ACHI sata to IDE and was able to install xp. the problem now is that I have to change the SATA in the BIOS emulation mode, whenever I want to move the bone.

    Is it possible to change the xp to DCIS without reinstalling (it took forever to find the drivers to install correctly

    It is easy to change the speed setting control, but you have to do is exactly right, or you have to reinstall XP.

    You have a chance. No overs. The AHCI driver has as the only accurate, or if you install one wrong, your XP installation will not start in IDE mode or AHCI mode.

    I want allows you to change the BIOS to AHCI and startup in your installation of Windows 7, and according to what you have posted, I need to confirm that mode AHCI W7, that listed the drive controller is an Intel (r) 5 Series 6 Port SATA AHCI Controller.

    If you can confirm that, then go back into the BIOS, change the setting back to IDE and start in your installation of Windows XP.

    Here's what you need to do to be able to adjust the speed on AHCI controller when you install XP (or any laptop Intel OS windows or office) in IDE mode.

    Note: this method does not work to change the IDE RAID.

    1. If you have not already done so, or do not remember if you did... First install the chipset driver & restart:

    http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=4095873&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_83120_1%257CswEnvOID%253D1093%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

    The following steps are used to install the AHCI drivers in the Windows XP operating system that is installed in mode IDE controller.

    2. download the Intel RST drivers from the support page and the driver of your PC. RUN THE FILE

    http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=4095873&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_88740_1%257CswEnvOID%253D1093%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette

    .cachetoken

    3. download the free utility 7-zip file from the link below and which allows to extract the executable files to a folder.

    You need to do will surprise you install 7 - Zip, to right click on the file sp50624 and let 7-zip to decompress in the sp50624 folder so that you can navigate to it later in the steps below.

    http://7-zip.org/

    4. right click on the icon my computer, click on manage, select Device Manager.

    5. click on the + sign next to IDE ATA/ATAPI controllers, it would show the devices under this category.

    6. you will find the installed Intel SATA storage controllers.

    7. under the terms of your XP screenshot, you see an Intel (r) 5 series/3400 series Chipset Family 4 Port SATA Controller.

    8. click on the Port SATA 4 controller, click the driver tab and then click on put up-to-date driver.

    9. in the Welcome to the Hardware Update Wizard, select No, not this time. Click Next.

    10. Select install from a list or specific location (Advanced). Click next

    11. Select don't search. I will choose the driver to install. Click next

    12. click on Have Disk

    13. click on browse

    14 select location: what 7-zip file.

    15. click on the drivers folder.

    16. click on the x 32 folder.

    17 select iaAHCI.inf

    18. click on open

    19 lists several SATA AHCI controllers. From this list, select the controller AHCI SATA Intel(r) 5 series 6 ports. Click Next.

    20. the update driver warning will be displayed. Ignore, and then click Yes.

    21. the driver will be installed, and as soon as the update Hardware Wizard appears. Click Finish.

    22 reboot.

    23 while the reboot, press the F10 key and start the BIOS configuration utility. Go to your device configurations under menu and change back the SATA AHCI Mode, save the settings there (F10) and their output, save the changes and reboot.

    24. When you are in AHCI mode, the driver will complete the installation and you have to restart again.

    Now, the SATA driver is correctly installed and the Bureau will start in Windows with the SATA AHCI Mode.

     

Maybe you are looking for