Share USB over the internet using the E3000

Similar Questions

• surface rt will not share files over the network from the home group

  I added my surface that RT to my network, but is does not share files or a printer

  You cannot access the files or devices on the Surface RT of the network see only compared to the systems default RT.

  There are workarounds, but as one provided is by design.

• Cannot access microsoft over an internet connection by using the proxy to the office

  Recently I can no longer access the Web site from microsoft, or support for microsoft over an internet connection in my office who uses a proxy server, so that the automatic systems update windows could not work well, and the bases of microsoft security might not regularly to update the definitions of viruses and spyware.
  However, if I use an internet modem usb connection, then all problems can be solved, in my laptop, which means no protection of microsoft access. But when I use the internet connection via a USB modem, I can't connect to the local network in my office.

  I already check on the filter of the proxy server and there is no protection of access to microsoft.
  Why this happens and what I can do to get access to microsoft through the Internet using a proxy server in my office?

  Thank you.

  Hi Juli,

  Thank you for your response.
  This problem is better suited in the forum TechNet that we have a dedicated team with advanced tools and permissions to help you with such questions. I suggest you post the same question in the Microsoft TechNet forum for more help on this issue.
  https://social.technet.Microsoft.com/forums/Windows/en/home?category=w7itpro

• A key using self-powered USB causes the base station go "off-line".

  I found that by using a USB drive self-powered, as the WD My Passport, without a USB powered, hub attached to the base of the station USB port has caused the base station go "off-line". In fact, using a powered hub does not always remedy the situation, but it is more reproducible without one.

  This is true for the AirPort Extreme and Time Capsule 802.11ac. The problem does not occur immediately, but it may happen over several days. The symptom is that the player is no longer lies in the Finder, or the base station appears in AirPort Utility.

  My question is if others have had the same results? ... and did you find permanent solutions?

  

  USB key "seems" less reliable on the airports of AC model than on previous versions.

  I tend to not use USB attached to routers because I think it's convenient mediocre and poor speeds. But I tested with previous models, and it seems ok...

  KT those a few posts here a me trial there. These are not self powered readers... who I have long recommended people avoid the use (without a powered hub)...

  Re: External backup drive down regularly

  In fact, the wire is different from what I remember... Age don't you know.

  But I did the test on an AC TC. The result has been very reliable. He did not cause the TC to close... but I lost the connection of the USB almost every day... except for a trial where I kept the USB drive mounted in the Finder... so that the USB drive wouldn't turn it down. He then worked for a few weeks... until what the noise of rotation of disk (sitting next to me) drove me crazy... as soon as he was mounted is more, he would pass the same existence as before.

  The previous model TC was barely big enough for the internal use of the power supply units. So powered car running disc was impossible.

  Provide EI (GEN 1-5) at 1. 8A and 12v was adequate, but the standard USB port is estimated at 500 my wrong to manage disks free power.

  You would certainly think AC 12v 5A power supply models would have a lot of power. Yet, power problems are a major problem still. Supply is extremely sensitive and stop easily for reasons I'm still to understand.

  Where the long threads on power issues to the AE.

  Now, I'm going to speculate... I think that SOME problems are associated with power.

  What is the USB port side in airports of AC? Is it still 500ma? Apple never seem to give easy to find info on these details.

  Do you know? I haven't measured it, but I can try timing the time it takes to charge a phone.  Assuming that it will immediately trigger.

  Then he will have problems with a self-powered drive. Even if the drive has less energy than quotes, current during starting is much higher. The restriction of the power on the USB port is managed by a self regulator recovery... Once you triggered it, you must stop the power... then reboot the machine to restore power.

  Then, I also did the test with hub powered... and like your results... It was better. Longer time between the drive disappears from the network. But it was not enough to stop it.

  There is another interesting effect using self-powered hubs... I discovered this on a computer running Mac OS lets say! The computer would not start with a powered hub connected to the front USB. Hubs self-powered cheap, showing a defect in their design. They can refer to the USB port. In this computer, it was enough to stumble on the good power circuit and prevent the supply, commissioning... As long as the computer is running, everything was fine... but if I turned off it would not start. I finally woke up I had to exit the USB every time. At one point, I made a "special" Cup USB cable 5v line so the hub can stay connected. You can probably just to isolate the 5v of contact in the USB. Regardless of the configuration of power USB in the AE or TC is as you can assume she's sensitive enough... and at any time when the 5V on USB hub exceeds the 5V in AE it could trigger.

  The symptom is that the player is no longer lies in the Finder, or the base station appears in AirPort Utility.

  Endangered of AU base station is not uncommon.

  It responds to the pings? I guess he still has lights but is he blocked? You still get internet through it?

  Try to open it manually in to THE... use of the file / configure from others and put the IP address of EI.

  Talk with me by e-mail... It is open in the profile.

• Need help to connect my ibook G3 to the Internet using Airport

  Hello
  I recently bought an Ibook G3 and unable to connect to the internet using Airport. I can find my internet provider and it allows me to enter the password for it, but after I have get the same message:
  "An error has occurred all trying to join the selected airport network. -3151.
  the password is correct, so I don't know why its not connecting.
  I checked the map, and everything seems OK.

  the Ibook is a Mac OS 9.2

  version Mac OSZ1 - 9.2.2

  Help, please! -J' I feel like IM going crazy trying to get it to work

  .

  Older hardware uses a different protocol and the later models of wi - fi security, so

  It may be that the unit is able to see the signal available but not able to use it or connect.

  In order to set up an AirPort Base Station wireless vintage separate from any modern

  wireless local area network is a way to use a less secure configuration wireless computer older

  and without compromising the latest systems which would share a reduced security wireless

  If you want to reduce the overall security of the system (using the old protocol WAP,

  WEP, etc.; drafters WPA2 +) and base stations can be more difficult if they

  also have more than one type of signal. Older computers use less bandwidth.

  At this point, I cannot possibly be a great help; short of reading thanks to my favorites

  old pages (and check if the pages still work online) reference to use the installation program.

  My setup wireless WPA2 but earlier use AirPort Express base; and also have older

  base station AirPort Extreme 54 k White orb on-site; but not currently enabled.

  To have an additional wireless hardware for use with vintage computers.

  Good luck in this case!

• Satellite Pro M70: How to connect to the internet using a second computer

  I have a Toshiba laptop Satellite Pro M70 with a RTL8139/810 x Family Fast Ethernet NIC use this, the laptop was connected to a desktop PC, whereby it is connected to the internet via a modem ADSL (USB) on the desktop. The laptop runs XP Pro; the desktop has XP Home.

  My laptop has been a nasty virus. When removing it, he lost the ability to network. I tried "repair network", but he could not find an IP address. In the end, I had to manually set an IP address for the network to work again. You use IPCONFIG release and renew the IP addresses that failed - unable to connect to the DHCP server.

  He could now see the Office network and Exchange files across be it, but it could no longer contact internet.

  I decided to reinstall the OS on the laptop, but this does not solve the problem. I still have to manually set the IP on the laptop. I can connect two PCs, but does not see the internet from the laptop on the network.

  If I connect the laptop directly to the internet via the modem, it works fine. I can even access the internet from the computer on the network when this is the laptop that has the internet connection.

  The virus could have damaged the Ethernet controller, or she affected somehow?

  Is it possible to test?

  Have you advice?

  Hello

  The virus was detected on the laptop you so maybe your PC has also been affected.
  Did you check if the laptop and the PC using the same workgroup?

  XP supports a help option. There, you might choose the Internet Connection Sharing Troubleshooter. "

  Maybe it helps

• Cannot use the USB in the Portege M500

  Hello

  I use the model of laptop Portege M500. When I connect my Transcend 4 GB pen drive it detects and dispays an alrert lower-right with "new hardware found". At the same time another box dialog box opens asking for the installation, I tried to give next & finish but it does not.

  1A tried to install the drivers of the utility in the toshiba site.
  2. check the USB - it works very well in the other system.
  3. I use Windows XP. I checked the registry key to activate the pen drive.

  Ended in vain.

  It would be nice that you can share your ideas to connect the USB into the laptop.

  Thank you.

  Hello

  I had the same question that I couldn t use my pen USB drive more. After a search here a bit I started to remove the USB ports in Device Manager. Then I restarted my laptop and the USB ports are being installed again. Now, I have my USB again! :)

  In addition, it would be interesting to know if you have tested another USB key. Another one works

• Satellite L20: Unable to connect to the internet using mobilephone & dongle BT Mecer

  Hi all

  Mine is an edition of Satellite L20.
  I recently installed XP Professional Service Pack 3. I connect to internet using my USB cable with my Sony Ericsson C702 (use the phone as a modem).

  Since there is no bluetooth built into my laptop.
  So, I bought a Mecer bluetooth dongle. I installed the bluetooth software. Can I transfer data between my laptop and my mobile phone via bluetooth.

  Now the problem is I can not connect to the internet via bluetooth. I opened my bluetooth IVT software and paired my laptop and mobile computer. Then I opened my Sony ericsson suit and looked for my mobile finds, my mobile and still once he pairs with my cell phone and when he tries to connect with my mobile phone its shows "device cannot be detected, try again." I tried to reconnect, not matching and pairing it several times, but no use.

  I also found one thing, just after it displays "Device cannot be detected," a pop-up message "SEPCSuite.exe has encountered a problem and closes the window with options."
  1) send to microsoft
  Including 2) send.

  What can we do to fix this problem?

  No idea...?

  See the website of your provider of Bluetooth software to help. This forum is for Toshiba Software only.

• Unable to connect to use Windows XP mode on a Virtual Machine, cannot share files between the Virtual Machine and host

  Because of the need to run some XP programs, I ordered Win7 Pro and installed a Virtual Machine with XP Mode.

  Managed to get it going somehow, but does not connect to my home network (can't see any other computers, which seems to be common with the host of Win 7, but here, I managed to install quick links to other computers - they will not work in XP Mode), even if the Internet connection is working perfectly.

  In addition, I can't find a way to share files with the host country, drive C appears to be different from that of the hosts with no common points (where it is currently stored beats me).

  I can access a USB key, but only at a price to make it unavailable to the host and the attempt to release his capture when running XP Mode failed.

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

• After the HP update cannot connect to the Internet using my ISP wireless

  I have a HP Pavillion15 Notebook PC, Prod #: E7C83AV using Windows 8. Hp yesterday made an update, and subsequently, my computer does not connect to the Internet, using the same network wireless ISP.  Only way I can get Internet is to use the DSL unit to the computer USB cord.  I had a "Configuration for Invalid IP (106)"

  My ISP is still in my system with the same password, and I can't find any reason why it does not connect.  I have all the correct lights on my computer & the DSL unit.  I have not contacted my ISP, do not know what to say "After HP did an update, your service will not work?"

  Tonight I tried to get help from HP, big whoopie, even when I'm in warranty for 9 months, I was transferred to HP/SmartFriends, who told me that I had to pay for the assistance.  It won't happen!

  I don't know what to do now, I'm not very computer savvy and if HP won't help, do not know where to turn now.

  I'm fighting mad now!

  Someone please help.

  Have you tried to restore to previous work image?

• My m4v videos to view a preview, but now it is a generic white band 'film' with a blue dot. I used to fly over the icon and preview would play. Previews were an easy way of the video ID. How can I restore previews?

  My m4v videos to view a preview, but now it is a generic white band 'film' with a blue dot. I used to fly over the icon and preview would play. Previews were an easy way of the video ID. How can I restore previews? OS X El Capitan 10.11.4

  I'm ' dropped in ' the answer! By changing the name of the ".m4v" to ".mov" file preview is now fixed! Billy just got lucky...

• Friday at 530, we were able to get on the internet using Firefox. 21:00 we received a message "Unable to load page" but were able to go to Internet Explorer and get online. HELP I want MY FIREFOX to come back!

  Friday at 530, we were able to get on the internet using Firefox. 21:00 we received a message "Unable to load page" but were able to go to Internet Explorer and get online. HELP I want MY FIREFOX to come back!

  See this support article - difficulty of problems connecting to websites after Firefox update

• Is it possible to use iCloud shares photos with the two opening and Photos at the same time?

  Is it possible to use iCloud shares photos with the two opening and Photos at the same time?

  Non - PEAK is not a feature of iPhoto or Aperture - this is new with Photos

  LN

• Satellite P300: - 0701 usb over current error on the splash screen for the hc port

  Hey there,

  Yesterday I woke up and I started my laptop, and it gave me this error at startup:
  0701 usb over current on hc port
  0701 usb over current on hc port
  I had the possibility to press f1 to continue and f12 to get into the bios.

  When I press f1, that my laptop will not start, it brings me to the BIOS anyway. Then when I restart, the screen turns black and does nothing.
  Now I does not solve the screen doing nothing problem by removing the battery and replacing the battery, but I still have these USB errors.

  I also noticed that before that there is this problem, my laptop does not recognize a storage device, not even my blackberry. He acknowledged, however, my mouse and keyboard (since they are not storage devices).

  Can someone help me? Thank you!

  What model of laptop do you have exactly?
  When you start your notebook F8 press to display the advanced startup options.
  It work? You can start a computer laptop in safe mode?

• Satellite L500 - high-pitched noise when the USB port is in use

  I have a Satellite L500-1ZP, aged from 1 month. When I connect a usb key or other device in my usb port, the laptop generates a high-pitched noise.
  The sound is not strong, strong but enough to irritate me.
  When I disconnect a device, the sound disappears.
  The sound is also there when I disconnect my laptop to the grid form.

  This is a common problem and can it be resolved?

  To be honest I don't think that this is a common problem. Is that what you found more threads with the same description of problem?
  The same happens when you use the available USB ports?
  You can locate where this noise is coming from? Maybe the speakers?