After the HP update cannot connect to the Internet using my ISP wireless

Similar Questions

• Connection to the internet using a Verizon Wireless router

  I have a Compaq Presario CQ60-210US running Vista 32-bit Service pk2 with an Atheros AR5007 802 Wireless card. 11b / g. I have problems to connect to the internet through a router with WPA-2 Verizon Wireless. I can connect to the wireless router, but it will not connect to the internet through it. I am able to connect wirelessly through other routers wireless without any problem. All solutions?

  Problem was with the wireless card Atheros who need an updated driver. Found a newer driver on a Czechoslovak website. Downloaded and intalled and solved the problem.

• Impossible to access the internet using WAG 160N wireless adapter

  I have connected my WAG 160N to internet via ethernet cable to my PC Windows xp pci card, but when trying wireless connect to a spare PC, using Netgear WG311 adapter wirelesspci in the spare wheel, although I get a 100% signal, I can't connect to the internet.

  I would be grateful for the advice

  Thanks for the reply and suggestions. I've grown using the spare to WAG 160n and installed the adapter connect pc wireless in my spare pc and was pleasantly surprised to have a connection to the internet after uncheck wireless network connection before the windows firewall in the Security Center. It was not a solution before I couldn't even connect to the internet then. The only difference was that the spare wheel was recently formatted and free from any clutter. Now that I know that I can connect. Fingures crossed, I will return and if that does not work then I know I have to start looking at the deletion of something of the origin of the problem

• Xperia SP C5303 after 4.3 update cannot connect to the proxy server where I have no proxy

  I did the upgrade and now I can't use all the google apps, more a few others and the message is that I am unable to connect to the proxy server where I have no proxy server. I have just a modem normal wifi Adsl.
  It happens also in 3G. I can't download new internet settings if it is of no use.
  Any suggestions? I'm not a guru of Android so please try to help?
  Apps not working not are Facebook, YouTube, Twitter, Chrome, cards, play store.

  I found the solution. Start the PC COMPANION and find REPAIR that will install the UPDATE again (just follow the instructions) I hope that this time will be better. Worked for me and now mobile is allowed. A factory reset only I believe.

• After upgrade from Vista to Windows 7 Ultimate home, no problem connecting to the internet when logged as an administrator, but cannot connect to the internet using the standard account. How to fix this?

  After upgrade from Vista to Windows 7 Ultimate home, no problem connecting to the internet when logged in as an administrator,

  but unable to connect to the internet using the standard account.  I have the latest version of the Solution Explorer.

  How to fix this?

  Glad to hear it.

  If the problem is resolved, mark the message as response, then it'll be useful for people with similar/identical problem.

• Windows cannot connect to the Internet using HTTP, HTTPS or FTP. __This is probably caused by settings of firewall on this computer. __

  I recently installed the version of Norton, after that I was unable to use the internet, I thought it was the Norton firewall settings. After having playing with her for 30 minutes, I gave up and uninstalled Norton. I have disabled the firewall, I have reset the default settings. Here is the message I get when I run a diagnostic. A crazy thing is that I can connect to internet when I connected to this same computer as a guess.

  Please help me!

  Windows cannot connect to the Internet using HTTP, HTTPS or FTP.
  This is probably caused by the settings of firewall on this computer.

  Check the settings of firewall for the HTTP port (80), HTTPS port (443) and FTP port (21).

  Hi rhonda9937,

  1. what browser you are using to connect to the internet?

  It is not recommended to keep Windows Firewall disabled on the computer.

  This would happen if the ports are not open in the Windows Firewall.

  I suggest that you open ports in Windows Firewall and check if it works.

  How to manually open ports in Internet Connection Firewall in Windows XP

  http://support.Microsoft.com/kb/308127

  Troubleshooting settings of Windows Firewall in Windows XP Service Pack 2 for advanced users

  http://support.Microsoft.com/kb/875357

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Vista update (August 2010) left my laptop could not connect to the Internet via my home wireless network

  Yesterday, on August 13, I installed - as guest - a number of updates to Windows Vista on my laptop. It seems that most of them is security updates. There are 16 in total, of which 9 are titled "A security update for Windows Vista". (For reference, they include KB978886, KB982214 and KB2079403).

  Since the completion of this facility, I can't access the Internet using this laptop. I have a wireless router that works very well. Our other two laptops families (using Windows 7 and other Windows XP uses) are the two beautiful connection today by using the wireless router, so I know that the rest of the installation is fine.

  Immediately before installing updates, everything worked very well; Since then, the problem exists. I made no other changes of configuration, facilities or any measure that might have caused this.

  Please tell us how I can remedy this problem. So far my best idea is to uninstall all updates. I really don't want to do it, because I guess they are important!

  Thank you!

  [FYI - Norton Internet Security includes a third-party firewall (Norton Personal Firewall) as well as an anti-spyware component.]

  Looks like you have a hijackware infection on your hands there, Tim. That being said...

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Need help to connect my ibook G3 to the Internet using Airport

  Hello
  I recently bought an Ibook G3 and unable to connect to the internet using Airport. I can find my internet provider and it allows me to enter the password for it, but after I have get the same message:
  "An error has occurred all trying to join the selected airport network. -3151.
  the password is correct, so I don't know why its not connecting.
  I checked the map, and everything seems OK.

  the Ibook is a Mac OS 9.2

  version Mac OSZ1 - 9.2.2

  Help, please! -J' I feel like IM going crazy trying to get it to work

  .

  Older hardware uses a different protocol and the later models of wi - fi security, so

  It may be that the unit is able to see the signal available but not able to use it or connect.

  In order to set up an AirPort Base Station wireless vintage separate from any modern

  wireless local area network is a way to use a less secure configuration wireless computer older

  and without compromising the latest systems which would share a reduced security wireless

  If you want to reduce the overall security of the system (using the old protocol WAP,

  WEP, etc.; drafters WPA2 +) and base stations can be more difficult if they

  also have more than one type of signal. Older computers use less bandwidth.

  At this point, I cannot possibly be a great help; short of reading thanks to my favorites

  old pages (and check if the pages still work online) reference to use the installation program.

  My setup wireless WPA2 but earlier use AirPort Express base; and also have older

  base station AirPort Extreme 54 k White orb on-site; but not currently enabled.

  To have an additional wireless hardware for use with vintage computers.

  Good luck in this case!

• Cannot check the Internet using my WRT54G2 V1 router.

  I have Blue Ridge cable Internet.

  I can connect to the internet perfectly by directly connecting the cord to this laptop that I am.

  I ran the CD for my WRT54G2 V1 router, and at the end of the installation it says my router is configured, but he said that it was not connected to the internet.

  I tried several times to fix this in troubleshooting, but none of them worked.

  I DID however just simply disconnect and reconnect the router after about 10 attempts and I've been on the internet for about 20 seconds. (I looked for something on google and found research.) But internet is turned off and it just says "Local".

  I want to connect to the internet using this router and thus be able to connect the members of my family with their laptops through this router.

  Thank you.

  Configure your router for Internet connection

  CLICK HERE for instructions

  To configure a router Linksys with cable Internet Service

  Make sure you follow the mac cloning procedure because it is the key

• Unable to connect to the Internet via a Linksys Wireless card

  I used a Linksys BEFW11S4 for several years with no problems.  A PC is connected via a network cable and the other (Dell laptop) used a wireless adapter Linksys that plugged into the laptop (model of Linksys WPC11 ver (4).  All my computers using Windows XP with the latest service packs.

  I plugged the Dell laptop to the router via a cable to transfer files faster than the network B.  Then, when I disconnected the cable and reconnected the wireless card, I was unable to use the Wi - Fi connection to connect to the internet.  Wired works very well, is not wireless.

  Windows reports a good wireless connection to the router, but the machine is unable to connect to the internet using the wireless card.  It can connect to the internet when using a network cable, however.

  Pings what either using the Wi - Fi connection failed (expired).

  I used another laptop (a more recent Toshiba with a wireless card built-in) to connect to the router and it works very well with the connectivity wired or wireless.  No problem switching back with this machine.  So, the problem is not with the router or the router configuration.

  I was through the forums and seen a LOT of people seems to have the same problem with these Wireless Linksys routers.

  I tried to use the Easy Link software to configure the machine, but: (1) Linksys updated web site is not valid, and (2) with the www.linksysfix.com/ela site that directs users to the software is also invalid.  Linksys technical support seems to be lacking.

  I went to the usual network setup menus and two laptops seem to be configured the same way, again, we're working wireless and we do not.

  I would appreciate solutions others have tried and who has worked with this problem.

  I reinstalled the drivers for the Linksys card and it does not work.  Windows recognizes the new hardware card, reports that it is connected to the router, but still no internet connection

• Unable to connect to the internet using Firefox or IE

  Unable to connect to the internet using Firefox or IE. I can ping other pc on my network home and can ping websites such as google.com. Other PCs on the home network connect without problems. Nothing has changed in the network or the configuration of IE/Firefox. The only change is that I have installed the update to Vista SP1

  Hello

  Stack TCP/IP Winsock settings in Vista has probably been corrupted.

  Journal to this page and scroll down, there are instructions for Vista.

  http://support.Microsoft.com/kb/811259

  Jack, MVP-Networking. EZLAN.NET

• Problems connecting to the internet using the wireless network connection

  I can't connect to the internet using my wireless network connection. I had made the diagnosis and he stated that "the DHCP is not enabled for the wireless network connection. I had checked the DHCP, but it has been activated!... Someone would give any suggestion for me to solve the problem?

  Open the run command box by pressing Windows key + R, type services.msc and press enter . Search The Client DHCP and check if it is enabled or disabled. If disabled then turn it on and see if the problem still persists or not.

  Open the run command box by pressing Windows key + R, type cmd , and press enter . At the command prompt, type ipconfig/all and press ENTER. Now, check the IP address, default gateway, DNS etc. If you find all the information is correct, but you cannot yet access the Internet so if you connect the wireless network is secure or not. To determine the glance to the wireless network icon in the taskbar, then click on it. It will show you the available wireless networks. If there is a "yellow shield" present on the network icon, the network is not guaranteed, if there is no "yellow shield" does while the network is secure. In a secure network, you might have a "network security key. In this case try to disable the 'Network security key' option for this network. To do this:

  Open Control Panel , click network and Internet , click network and sharing Center , click manage wireless networks on the left.

  In the list select the wireless network and do a right click, select Properties, Security disable tab all options that is, in security type do not select no authentication (Open) and to the type of encryption , select none . You can also activate the automatic connection and SSID settings to further enhance connectivity, on the connection tab, click to select the "connect automatically if this network is in range " and "check boxesto connect even if the network is broadcasting his name (SSID) .

  For more information click here and see how you can determine whether a network is secure or not.

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-know-if-a-wireless-network-is-secure

  If the problem still persists, then check your firewall settings and make sure that the firewall is not blocking your Internet connection. Some software Antivirus has a built-in firewall and they block by default all unknown connection to the tightening of security.

  Try to restore Windows Firewall default settings. Open Control Panel click on network and Internet , click system and security , click Windows Firewall , click default settings .

  Hope this will help. Thank you.

  Arup Ratan Paul

• Unable to connect to the Internet using Auntie Photon, it shows the device has been disconnected or is not available when clicking on the button connect

  Original title: Auntie Photon

  Hi all

  I use Auntie Photon on windows platform 8, and it shows the device has been disconnected or is not available when clicking on the button connect. For this reason, I am not able to use internet on my Laptop.I also in contact with the customer service and they told me to take the laptop to any engineer to solve this problem.

  Help, please.

  Hi Varun,

  Thanks for posting on Microsoft Community. I understand that you are not able to connect to the Internet using the dongle Auntie Photon. Let us work together as a team and try to get this fixed number.

  Please help me with the following information related to this issue:

  1. You have installed the required software on your computer which came with Auntie Photon?
  2. Do you see an error or exclamation point in Device Manager when you connect Auntie Photon dongle? See the steps to check:
  • Press Windows Key + X.
  • Select Device Manager.
  • Check if there is no error or exclamation point under Auntie Photon.

  This problem can occur if device drivers are not get detected or due to missing/corrupt device drivers.

  Please follow the steps mentioned below:

  Method 1: Run the hardware troubleshooter

  The convenience store is an automated tool that checks the hardware attached to the computer for known problems and provides details on how to correct them. Follow these steps to run the troubleshooter.

  1. Press Windows key + W on the keyboard.
  2. Type the Troubleshooting in the search bar and press Enter.
  3. In the Troubleshooting window, click show all in the left pane.
  4. Click hardware and devices.
  5. Click right on material and devices and and select run as administrator.
  6. Click Next and follow the on-screen instructions to complete the process troubleshooting.

  If the troubleshooter could not find and fix the problem, I would suggest trying the following method and check.

  Method 2:

  Note: Make sure that the Auntie Photon dongle is plugged.

  Step 1: You can try to uninstall and reinstall the drivers of Auntie Photon and check. Follow these steps:

  1. Press Windows key + X on the screen.
  2. Select Device Manager.
  3. Expand the network adapter and right click on driver and select Uninstall.
  4. Restart the computer.
  5. Windows will automatically load the drivers.

  Step 2:

  You can also try to launch the Windows updates and install all the updates that are available including the driver in option and the updates of the firmware.

  Windows Update: frequently asked Questions

  You can also get in touch with Auntie Support and check the updates to driver for Windows 8.

  Please answer us on the State of the question to help you further.

• I recently got a laptop (Windows XP) that has wireless when I try to connect to the internet using ethernet

  I recently got a laptop (Windows XP) that has wireless when I try to connect to the internet using a lan cable plug on my netbook (win 7 starter) that has wireless it gives me limited connectivity and no internet

  Hi evilcrebyc,

  Consult the following Microsoft articles and make sure that all settings are correct.

  How to configure Internet connection sharing in Windows XP

  http://support.Microsoft.com/kb/306126

  Troubleshooting Internet connection sharing in Windows XP

  http://support.Microsoft.com/kb/308006

• When I try to connect to the internet using my laptop, I get an error code. He says that I'm connected to the internet, but I am unable to connect.

  Unable to connect laptop (wireless) broadband

  Recently, I changed to wired broadband. When I try to connect to the internet using my laptop, I get an error code. He says that I'm connected to the internet, but I am unable to connect.

  Remove any preconfigured network settings wireless then rescan to make new connection settings

  Hope this will do the needfull

  Please let us know