Shared clone reentrancy and Inline

Similar Questions

• VI Analyzer: reentrancy and USR test

  I am developing a test of custom parser VI, following the steps given here: design a VI Analyzer Test custom, that will check the status of reentrancy a VI. If it is reentrant - I then want to check for all while loops with uninitialized records the SHIFT (USR) or feedback on the block diagram nodes and compare that with the type of reentrancy (share clones and allocated in advance). If there is the USR or feedback nodes and type of reentrancy is clones part I want to point out that as a failure. It is easy check the reentrancy and type using VI server, shown VI extracts below, but I did not understand how to test for nodes of the USR/Feedback. Maybe there's a GObject property.

  If a returning VI manages the data of the State between calls and share the clones then there is no guarantee that the State will be kept appropriately between subsequent calls when a first level VI calls in several places. Excellent article by Brian Powell on LabVIEW log field found here: http://labviewjournal.com/2012/02/maintaining-state-1/.

  

  Any help would be greatly appreciated since it comes from a customer who wants to use this criterion of thousands of VI s rather than opening each one and control... Thank you.

  Instead of writing your own essay, can you use the test environment VI questions (in the block diagram > category warnings) of the VI Analyzer Toolkit to verify this?

  If for any reason any test of the expedition is not what you need, you can view its source code here:

  \project\_VI Analyzer\_tests\Block Diagram\Warnings\Reentrant VI Issues. llb\Reentrant VI Issues.vi

  None of the screws for this test is protected by password (in LabVIEW 2011), so you can see the script code I used to find the shift uninitialized registers and not initialized comment nodes. Let me know if you have any other questions.

• Cache objects VI shared between 32 and 64 bit?

  Transferred into the LAVA: http://lavag.org/topic/16349-vi-object-cache-shared-between-32-and-64-bit/page__pid__99898

  I am currently working on a major project that is to be deployed in 32 - bit and 64-bit flavors. This means that I must periodically switch between installed versions of LV to build.

  It * seems * that if I work in 32-bit BT, and then I close and re-open my project in 64-bit BT, that everything needs to recompile... even if I had only changed a few things since the last, I worked in 64-bit.

  It seems that while LV keeps a Cache of objects VI separate for each version of LV, that it does NOT keep a cache separate for 32-bit versions and 64-bit. Is this really the case?

  Fabric Hello,

  LabVIEW maintain separate caches for versions 32-bit and 64-bit of the same version, but in the same file. They are separate entries in the objFileDB. Because 32-bit and 64-bit are very different beasts, the project must be recompiled in order to adapt to the new platform every time that you open in a new environment. It is possible to separate the compiled source code code. Research in the other forum posts, this separation likely to cause a higher risk of corruption VI.

  Best,

  tannerite

• a pc that is sharing the printer and another pc does not accept the same network printer on xp pro sp3

  a pc that is sharing the printer and another pc does not accept the same network printer on xp pro sp3
  What is the solution?

  Check out these links

  http://TechNet.Microsoft.com/en-us/library/bb457001.aspx

  http://UIs.Georgetown.edu/software/documentation/WinXP/WinXP.network.printer.html

• Photosmart C4480 - sharing between XP and Vista problems

  I have my Photosmart C4480 connected via USB on my desktop running Windows XP. I have a home network set up between the desktop and my laptop running Windows Vista 32-bit. Sharing works files and the computers can succesfully mutually ping no problem.

  I have the printer to share in XP, but Vista does not see the printer on the network. I installed the printer drivers on both computers.

  I know that's not where he's going, but maybe someone will read it. I called the technical support and spent 57 minutes on the phone and got anywhere, not less than 40 of the 57 minutes were spent in complete silence. The only stage of the tech support rep asked me to do is to download the latest drivers on the laptop, but then me has said he did not install. After 57 minutes, he sent me an email with a link to the plug of the printer. He asked me to read him what it says beside 'Connectivity' which of course was USB 2.0. I had already tried to explain once Mr the difference between a printer wireless and a shared printer on a wireless network. Clearly, he never had the image. After reading the option of connectivity USB 2.0 for the guy, he noted that the printer could not be used on any wireless network. So frustrating. Very, very disappointed in HP technical support. Very, very unlikely that I buy another HP product.

  Someone help me please.

  I'll pass by this very detailed and try to think you don't know what you're doing so that the directions are clear and easy for anyone to understand.

  1. you must first install the printer on the computer on which it will be connected to via USB (Windows XP computer in my example). Follow the exact instructions that came with the printer for best results. The directions are simple and clear and the steps must be performed in the order that they advise for a correct installation.

  2. After you have the printer installed and working properly on your computer, the printer is directly connected to via USB, use the installation CD to install all the drivers on the computer you want to access the printer over your home network (Windows Vista computer in my example). When you put the installation provided in this computer CD click on Install or Setup or anything else that is similar in option you are given in the menu. When you get towards the end of the installation, Setup prompts you either to connect the printer to the computer or to continue and complete the installation without connection. You want to complete the installation without the printer connection.

  3. now that you have all the appropriate drivers installed on computers you want to set up your network. On the computer on which the printer directly connected (computer Windows XP in my case), you want to run the Network Setup Wizard to set up the printer share. In Windows XP, you want to click on start > my network places. This will open the my network places window. In this window on the left side, you should see a few options in the section "network management". Click 'set up a home or small business network. This will open the Network Setup Wizard. You will notice that one of the bulleted items listed for what you can do with a network is "share a printer. Follow and complete all the steps in the Network Configuration Wizard. When you are finished, your network must be configured and ready to go.

  4. now you want to turn on sharing the Photosmart C4480. Once more on the computer on which the printer directly connected via USB (once again, the Windows XP computers in my example), you want to click on start > Control Panel > printers and faxes. In this menu, you should see your newly installed Photosmart C4480 printer. Right-click on the printer and select "Properties". This will open the window properties of HP Photosmart C4400 series. You will notice that the window has several tabs at the top. Click on the "Sharing" tab, select "share this printer" and name the printer in the "share name:" text box. Do not the complicated name. I used "HP C4480" for mine. Click 'OK' to close the window and save the changes.

  5. you need to know what the IP address of the computer with the printer connected directly via the USB port, so that we can ensure that your network is configured correctly and that the other computer (Windows Vista in my example) is capable of good communicate with the Windows XP computer. On the Windows XP computer that is connected to the printer, click on start > all programs > Accessories > command prompt. This will open the command prompt window. Type "ipconfig" and press ENTER. This will show you your IP address, subnet mask and default gateway. Note your IP address. There will be a series of four numbers, separated by three points (for example 192.178.1.2). You can close the command prompt window now.

  6. now you know what the name of the computer is on the network. Click the Start button then right-click on "My Computer" and select Properties. This will open the "System Properties" window You will notice that there are several tabs at the top of this window. Select the "Computer name" tab The name of the tab may vary from one computer to another, but there will be a tab named 'Computer name' or 'Network name' or something similar. Select this tab. On this tab, you will see "full computer name:" and then to the right of that will be the name of your computer on the network (the computer DESKTOP for example). Note that. Click 'OK' to close this window.

  7. now you are done on the computer on which the printer directly connected via USB. Get on your other computer (Windows Vista computer in my example). In Windows Vista, click Start > Accessories > command prompt. This will open the command prompt window. Type "ping IP address" and press ENTER. Put your IP (e.g. 192.178.1.2) where I typed "IP address". It tests communication between computers and display the results when the test is performed. If all goes well, it will say something like 4 packets sent, 4 packets received, 0% lost. If packets have been sent but not received then you have a network problem which must be settled before the printer you will work.

  8. assuming that the ping was successful, you are almost finished. Close the command prompt window. Always on the Windows Vista computer (the computer not directly connected to the printer via the USB port), click Start > network. This will open the 'network '. Now your computer will search and display all present on your network. It may take a minute or two so be patient if nothing appears immediately. Finally the name of the other computer should appear (e.g. OFFICE). Double-click the icon above the name of the other computer. This should now show a list of all that on the other computer on the network. The common things to see here are printers and a "SharedDocs" folder You should see that the listed here HP Photosmart C4480. It is listed under the name you gave to the printer in step 4 above. Right-click on the printer icon and select 'connect '.

  9. This will open the "Windows printer Installation" window and says "connecting to the PRINTERNAME on computername. I don't remember exactly what happens the first time you do this, but it can ask you for installation and others. If so, just follow all the steps, it gives you, and he needs to connect to the printer.

  10. at this point, you are ready to go. You should now be able to open Microsoft Word or another program and print on the printer HP Photosmart C4480 from the Windows Vista-based computer on your network. The Photosmart C4480 will very probably not already set as the default printer so you will have to select in the menu of the print window in the "Printer name" drop It can open a window saying that the computer connects to the printer when you do this. After that when you click on print, your document should be sent on the network of the Photosmart C4480.

  11. If you want to set your Photosmart C4480 printer by default on the computer, it is not directly connected to (Windows Vista computer in my example), click Start > Control Panel. This will open the Control Panel window. Under the heading "Hardware and sound", click on "printer".  This will open the Printers window. You should see the "HP Photosmart 4400 series on ComputerName" icon in this window. Right-click on the icon and select "Set as default printer". After that, you should see a green and white check mark next to the icon of the printer. The Photosmart C4480 is now set as default printer on the computer, and whenever you print from any application will automatically be selected Photosmart C4480 printer.

  Hope all that made sense and solves your problems. If you please, after back and let me know if make you it work, or if you have other questions. I'll be more than happy to try to help!

• If I want to make a screen shared using video and graphics, programs Adobe would achieve this?

  If I want to make a screen shared using video and graphics, programs Adobe would achieve this?

  First Pro... Ask for details at http://forums.adobe.com/community/premiere/content

• Problem with the clone stamp and Healing brush, as soon as I use them I get a second image duplicated on top that move with the tool

  Problem with the clone stamp and Healing brush, as soon as I use them I get a second image duplicated on top that move with the tool

  You're apparently talking about Photoshop, so I'll pass this on Photoshop beginners forum.

• Clone Stamp and Healing Brush problem, please help!

  Hi, I'm new to the forum but I have been using Adobe creative suite for some time now.  As described in the title of the thread, I am having a problem with my photoshop clone stamp and Healing Brush tool that I can't fix on my own. I searched on the internet all day, scroll on many other posts, but I can't seem to find anyone else who has similar problems as I have here.

  It's a little hard to explain but the question I have, is that when I go to use my healing brush or Clone Stamp tool, layer I work if it is a flat or normal background editable layer get displaced as soon as I press the option button to make a choice, and when I go to install in the region using these tools it is then as I duplicated the entire layer and drag it around of the screen, even if no copy / paste was filed.  All my other tools are functioning normally and I wasn't having this problem last time, that I have worked on anything in photoshop.

  I am running:

  Mac OSX 10.5.8

  CS4 extended version 11.0.2

  Any help is greatly appreciated.

  Your probably see the source of duplication of overlay.

  Go to window > uncheck Source of duplication and either:

  Display the overlay for no overlay or check CRT to display the overlay

  cut to the size of the brush.

  

  There is also a forum for macintosh photoshop for later reference

  (you posted in the forum of photoshop elements)

  http://forums.Adobe.com/community/Photoshop/photoshop_macintosh

  MTSTUNER

• Clone Stamp and Healing Brush does not

  I also have problems with the Healing Brush tool and the Clone Stamp tool

  I am running Windows 7 (64 bit on a powerful computer with 6 GB of Ram and pleanty of HARD disk space.)

  I use the mouse cable and do not have a connected tablet.

  I duplicated the background as a background copy crazy ab\nd the invisible ther background layer copy backgound is selected and is made visible.

  By clicking on the tool or the other, I move the cursor to the source area I wish to clone of and [Alt] - click. I then try the slider on the destination area, the part I want to cover up with material in the source area of love.

  What is happening is the entire image moves showing that I move the mouse, revealing another image below that does not move.

  Either I don't understand what these tools are supposed to do, (I doubt that because I used this tool several times in PSE 6 without problems) or there is something terribly wrong with the program.

  I have underststand fronm reading the forums that the same problem exists in CS4.

  I checked the updates, but the only update I have not downloaded and installed is supported for recent cameras Raw files.

  PS Files that I'm getting are the original JPGs and have not been converted to any other type of file.

  Here is a page illustrating the offbeat image.

  

  Thanks for any help you can offer.

  BTW, Adobe do support this program? I can only find help this kind of help in the forums.

  It looks like what your seeing is the clone source overlay.

  With the selected clone tool, click the icon highlighted in red

  and set the options as shown below.

  

  MTSTUNER

• Problem with iPhone 7Plus, lightning audio commands, connector and inline

  Just bought a new iPhone 7 more and understand that there more listener intake. I have a pair of Bose In-Ear-Headphones who controls inline for voice/mic, volume, etc. But when connected to the adapter and plugged into the connection of the lightning and listen to music, the controls do not work. Others found that I'm certainly not the only one having this problem? The sound is very good, but the controls works do not, concerned the micro does not work either. It is my main use of headphones for meetings and teleconferences.

  Thoughts?

  Kind regards

  Bryan

  I have the same problem with my iPhone7, when you unplug and plug it in new job wil.

  After releasing music with the control, you can put it on once again, but when you wait long but when waiting in time he won't answer any more until you unplug and plug back taking.

  I contacted the support and there seems to be a software bug.

  Restoring say ore phone wait for the first update of IOS10

  Hello Michel,

• Is it possible to have a credit card for the sharing of family and another credit card for a family member?

  I want to have my credit card business for my purchases and subscriptions and have our personal card for the rest of the family purchases. Is it possible within a group sharing family?  If so, how it is configured?

  I think it's only 1 card credit payment to the folder.  However, family members may have gift or store credit which can be used for purchases.  If you credit cards/store gift for their accounts, then they may use their purchases, Yes?

  Purchases and payments - Apple Support families

• Variable shared between PC and myRIO

  Hi all

  I have a shared variable generated on a PC VI and I want to read this variable on a VI myRIO. I simplified it down to a simple generator of random numbers on my PC that updates all the 1 second and writes in a shared variable node. I then a random number (shared variable read node) receiver on my myRIO who should read this varable it updates. However when I run the two screws of the random number on the myRIO receiver does not refresh from a value of 0. Any thoughts on how to solve this problem?

  The issue only seems to happen when I try share a variable between the PC and the myRIO. If I have the receiver and random number generator communicate via shared variables nodes on the same hardware, for example on the PC or on the myRIO both the shared variable is transmitted and updated perfectly. I also made sure the shared variable engine is installed on my myRIO and the variable is set to the published network.

  I have attached a few screenshots of the dagram of block and I am happy to download the screw if this makes it easy for you guys.

  Thanks in advance!

  Ben

  Thanks for the advice natasftw, I will consider for the future.

  I managed to solve this issue this afternoon. It ends up being a firewall problem. I had previously allowed the engine variable to OR through the firewall, but that has not solved the problem. I visited this page (http://digital.ni.com/public.nsf/allkb/0D7B86F4B4D19A5E86256F9A006EECB1) and unblocked these three elements.

  C:\Windows\SysWOW64\lkads.exe

  C:\Windows\SysWOW64\lktsrv.exe

  C:\Program NIUninstaller Instruments\Shared\Tagger\tagsrv.exe

  Thank you all for your help, it is much appreciated!

• shared variables unused and vi

  I clean a project of 9 - months old. I'm the developer 3rd working on it and it became a bit disorganized. I want to clean the project directory and file before the next developer structure intervenes to support this project. What is the best way to organize an already existing project and the structure of the files to remove any unused vi and shared variables?

  Paul:

  In your project, you can right click on your variables and select 'Search of the appellants' to determine what (if any) screws use your shared variables. That can help determine which ones is not used.

• The difficulty to move the files to shared documents files and transfer documents to my USB on my computer

  I'm moving all my documents and music files in the folder documents shared on my computer but its telling me C:\ is not accessibble, access is denied.
  He responds in the same way when I try to move files that that are on my USB on my computer.
  I don't know if this has to do with the hard drive or what he can possibly be or how to fix it. Help, please. Thanks in advance

  Hello

  • Connect you as an administrator?

  You can refer to the following steps:

  1. Log the computer with an account that has administrative credentials. If you are running Microsoft Windows XP Home Edition, you must start the computer in safe mode, and then log on with an account that has administrative rights to access the Security tab.
  2. If you use Windows XP Professional, you must turn off Simple file sharing.
  3. Right click on the file/folder that you want to take control and then click Properties.
  4. Click on the Security tab, and then click OK in the security message (if one appears).
  5. Click Advanced, and then click the owner tab.
  6. In the name list, click your user name, click administrator if you are logged in as administrator, or click the Administrators group. If you want to take ownership of the contents of this folder, select the check box replace the owner of subcontainers and objects .
  7. Click OKand then click Yes when you receive the following message is displayed:
     You are not allowed to read the contents of directory folder_name. Do you want to replace the the directory permissions with permissions granting you full control?
     All permissions will be replaced if you press Yes.
  8. Click OK, and then reapply the permissions and security settings that you want for the folder and its contents.

  See also:

  http://support.Microsoft.com/default.aspx?scid=kb;en-us;308421&product=winxp

• Sharing of files and hard drive between computers

  Dear Sir or Madam:

  I'm trying to connect two computers, which I named system A and system b. Computers and a DSL modem at wire speed Westel are connected to a router Asus WL-520 through ethernet LAN cables wireless/wired. HP PSC 2355 printer is connected to the router with a USB cable. The LAN on board two computers automatically configures the IP addresses of the form 192.168.x.x, which, in my view, to work. However there is no connectivity between the two computers, systems A and B. They do not see the shared disks and files on the other. The operating system is Microsoft Windows XP Home Edition, Version 2002 with Service Pack 3, n ° 76477-OEM-0015717-31545.

  When I ran the program ipconfig on each a said computer specification that IP routing is not enabled. See the configuration below. IP routing must be enabled in order to have connectivity? How IP routing is enabled in Windows XP? In the Services section of the Control Panel, there is the Routing and remote access, which is disabled and other related networking services, of which some are also disabled. What services must be enabled for computers to connect to share files and hard drives?

  Windows IP configuration

  Name of the host...: SYSTEM-A

  Primary Dns suffix...:

  Node... type: mixed

  Active... IP routing: No.

  Active... proxy WINS: No.

  Ethernet connection to the Local top-Dock network card:

  The connection-specific DNS suffix. :

  ... Description: ADM8511 USB to Fast Ethernet Sn54ls164j

  Converter

  Physical address.... : 00-50-5B-00-0A-4B

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  ... The IP address: 192.168.1.2

  ... Subnet mask: 255.255.255.0.

  ... Default gateway. : 192.168.1.1.

  DHCP server...: 192.168.1.1.

  DNS servers...: 192.168.1.1.

  68.237.161.12

  Concerning

  Peter Dooling

  Hello

  The display is OK. The routing setting this isOoff is not relevant in your case.

  ----------------

  Configure all of the computers to share files and you have a network Lcall.

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq#trusted

  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP -http://support.microsoft.com/kb/875357

  In Win XP pro you can visually see the setting of authorization/security and configure them according to your preferences.

  http://www.Microsoft.com/windowsxp/using/security/learnmore/AccessControl.mspx#securityTab

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  
  

  Jack-MVP Windows Networking. WWW.EZLAN.NET