Sharing of files and hard drive between computers
Dear Sir or Madam:
I'm trying to connect two computers, which I named system A and system b. Computers and a DSL modem at wire speed Westel are connected to a router Asus WL-520 through ethernet LAN cables wireless/wired. HP PSC 2355 printer is connected to the router with a USB cable. The LAN on board two computers automatically configures the IP addresses of the form 192.168.x.x, which, in my view, to work. However there is no connectivity between the two computers, systems A and B. They do not see the shared disks and files on the other. The operating system is Microsoft Windows XP Home Edition, Version 2002 with Service Pack 3, n ° 76477-OEM-0015717-31545.
When I ran the program ipconfig on each a said computer specification that IP routing is not enabled. See the configuration below. IP routing must be enabled in order to have connectivity? How IP routing is enabled in Windows XP? In the Services section of the Control Panel, there is the Routing and remote access, which is disabled and other related networking services, of which some are also disabled. What services must be enabled for computers to connect to share files and hard drives?
Windows IP configuration
Name of the host...: SYSTEM-A
Primary Dns suffix...:
Node... type: mixed
Active... IP routing: No.
Active... proxy WINS: No.
Ethernet connection to the Local top-Dock network card:
The connection-specific DNS suffix. :
... Description: ADM8511 USB to Fast Ethernet Sn54ls164j
Converter
Physical address.... : 00-50-5B-00-0A-4B
DHCP active...: Yes
Autoconfiguration enabled...: Yes
... The IP address: 192.168.1.2
... Subnet mask: 255.255.255.0.
... Default gateway. : 192.168.1.1.
DHCP server...: 192.168.1.1.
DNS servers...: 192.168.1.1.
68.237.161.12
Concerning
Peter Dooling
Hello
The display is OK. The routing setting this isOoff is not relevant in your case.
----------------
Configure all of the computers to share files and you have a network Lcall.
Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions
General example, http://www.ezlan.net/faq#trusted
Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .
Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx
Setting Windows native firewall for sharing XP -http://support.microsoft.com/kb/875357
In Win XP pro you can visually see the setting of authorization/security and configure them according to your preferences.
http://www.Microsoft.com/windowsxp/using/security/learnmore/AccessControl.mspx#securityTab
When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.
Jack-MVP Windows Networking. WWW.EZLAN.NET
Tags: Windows
Similar Questions
-
A question on the sharing of external hard drives between computers and tagging in bridge.
I'm editing/organizing files for a client on their external hard drives. If I label files in Bridge CS6 on my computer, will they see these labels when they open the readers in Bridge CS6 on their computer?
Labels should be included in the metadata, so that they should see their.
-
Satellite C660 - compatibility between motherboard and hard drive internal
Hi, I have a problem with the compatibility between the internal (1 terabyte) hard drive and installing windows 7 pro.
I broke my old internal hard drive (320 GB) and I bought the new hd (1 tb), but during the installation it says that w7 cannot be installed on this new hard drive.Can my pc motherboard (serial number: 3B071014k) support the new hard drive (serial number: wd10jpvx)?
and if the answer is 'yes', how can I make it work?First of all the question has nothing to do with the motherboard and HARD drive compatibility.
If the HARD drive is visible in the BIOS (first page), the HARD drive is supported by the BIOS and HARD disk controller.
In the case where the drive HARD isn't recognized, you will need to replace this HARD drive with another. I guess the smaller size of the 2.5 SATA HDD THAT would be taken in charge (500 GB)However, in case the HARD disk is visible in the BIOS, you should be able to install Windows 7.
Before starting the installation, you must format the HARD drive and should create the system partition.
For this procedure, I recommend to use some tools such as partitions for example: GParted
GParted is a freeware Linux tool.
You can create a bootable USB key in order to start the device using GParted:
http://gparted.sourceforge.NET/LiveCD.phpThen, you should be able to format the HARD disk and create partitions.
-
As noted, my motherboard has failed. IDE only AGP CPU core. Not much use trying to find anotherof those. Replaced the motherboard with a newer version. It has SATA, multi core processor, etc. Processor and HARD drive had to be replaced.
My Vista home premium 32 bit running on my machine for years. I loaded it on the upgrade with no problems. Went to windows update and SP1 and then SP2 and all other windows updates suggest and worked very well, for a few days.
Now, I get a message that the product key is already used and need to buy AnotherOne coming soon.
I didn't really want to do.
Ray
Diagnostic report (1.9.0027.0):
-----------------------------------------
Validation of Windows data-->
Validation status: genuine
Validation code: 0
Code of Validation caching online: 0x0
Windows product key: *-* - R3PWW - Q9F83-MPGXJ
Windows product key hash: V0k0X5Bh6bySPjhN3xP0FNlEfXY =
Windows product ID: 89578-OEM-7359704-12357
Windows Product ID Type: 3
Windows license Type: OEM System Builder
The Windows OS version: 6.0.6002.2.00010300.2.0.003
ID: {694FC5E9-29B3-4912-BE59-B80F163CD007} (3)
Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: Registered, 1.9.42.0
Signed by: Microsoft
Product name: Windows Vista (TM) Home Premium
Architecture: 0x00000000
Build lab: 6002.vistasp2_gdr.111025 - 0338
TTS error:
Validation of diagnosis:
Resolution state: n/aGiven Vista WgaER-->
ThreatID (s): n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002Windows XP Notifications data-->
Cached result: n/a, hr = 0 x 80070002
File: No.
Version: N/a, hr = 0 x 80070002
WgaTray.exe signed by: n/a, hr = 0 x 80070002
WgaLogon.dll signed by: n/a, hr = 0 x 80070002OGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
OGAExec.exe signed by: n/a, hr = 0 x 80070002
OGAAddin.dll signed by: n/a, hr = 0 x 80070002OGA data-->
Office status: 109 n/a
OGA Version: N/a, 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3Data browser-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default browser: C:\Program may Explorer\iexplore.exe
Download signed ActiveX controls: fast
Download unsigned ActiveX controls: disabled
Run ActiveX controls and plug-ins: allowed
Initialize and script ActiveX controls not marked as safe: disabled
Allow the Internet Explorer Webbrowser control scripts: disabled
Active scripting: allowed
Recognized ActiveX controls safe for scripting: allowedAnalysis of file data-->
Other data-->
Office details:{694FC5E9-29B3-4912-BE59-B80F163CD007} 1.9.0027.0 6.0.6002.2.00010300.2.0.003 x 32 *-*-*-*-MPGXJ 89578-OEM-7359704-12357 3 S-1-5-21-4094595745-936093891-605987175 Gigabyte Technology Co., Ltd.. GA-990FXA-UD3 Award Software International, Inc.. F5 20111013000000.000000 + 000F1303507018400FC 0409 0409 Time(GMT-05:00) Standard is 0 3 109 Content Spsys.log: 0 x 80070002
License data-->
The software licensing service version: 6.0.6002.18005
Name: Windows Vista, HomePremium edition
Description: operating system Windows - Vista, channel OEM_COA_NSLP
Activation ID: f3acdd3c-119a-4932-a3d7-0b6f33a1dca9
ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 89578-00146-597-012357-02-1033-6002.0000-1272012
Installation ID: 008920048280820090098534504852850165622866742580089774
Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=43473
Machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=43474
Use license URL: http://go.microsoft.com/fwlink/?LinkID=43476
Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=43475
Partial product key: MPGXJ
License status: initial grace period
Time remaining: 36240 minute (s) on (25 day (s))Windows Activation Technologies-->
N/A--> HWID data
Current HWID of Hash: OgAAAAEABgABAAEAAQACAAAAAgABAAEA6GHA7Qx13N/cFZRlVPIQM4gsPm + 8 t/L0Yj1Q1KyJrFYgIQ isActivation 1.0 data OEM-->
N/AActivation 2.0 data OEM-->
BIOS valid for OA 2.0: Yes, but no SLIC table
Windows marker version: N/A
OEMID and OEMTableID consistent: n/a
BIOS information:
ACPI Table name OEMID value OEMTableID value
APIC GBT GBTUACPI
FACP GBT GBTUACPI
HPET GBT GBTUACPI
MCFG GBT GBTUACPI
MSDM GBT GBTUACPI
CARPET GBT
TAMG GBT GBT B0
CARPET GBT
SSDT AMD POWERNOWOEM copies are not transferable between different motherboards. The license is linked to the mobo mounted. You are allowed to reagent a mobo replacement of the same make and model, but not an 'upgrade '. However, you can try to activate by phone. An agent can help you.
Activate by phone. http://TechNet.Microsoft.com/en-us/library/cc736912 (WS.10) .aspx
Or click Start and type ' slui.exe 4.
-
My desktop dell, keyboard and hard drive was stolen by a member of the family
My desktop dell, keyboard and hard drive was stolen by a member of the family, but I don't know where they live. I have the model # and delivered all the information that came with the computer. Can I know where it is through the ISP? SOMEONE PLEASE HELP!
Hello! Dell doesn't have the ability to track your computer, but you can fill a form of stolen property which will report your system in Dell computers in case your family member trying to file a claim of warranty etc. en.Community.Dell.com/.../7424.Stolen-Assets-Report-a-Stolen-System
-
File recovery HARD drive missing
I downloaded Win8 and installed, thinking that I would be able to run both I expected to install on drive d (Yes). It was late to do anything about it either once it all started, but he wiped the drive C. I decided to return to the factory settings.
This is what is happening.
After pressing F8, everything is OK up to choose recovery tool.
No "HDD RECOVERY BUTTON_ _TOSHIBA." Is displayed at the bottom.
Recovery disc and this is the message I received.
"System restore failed.
File recovery HARD drive on the second disc of the first hard drive not found.
There is no valid disk HARD recovery environment on this computer. »
I ran a program of partition and the result is that I have a partition 400meg on the front of the C drive and all files are intact.
Can you help me?
Hello
Saved on the HARD drive recovery image can be used if the laptop has only factory settings. After installing Win8 you have changed everything and factory settings have been deleted. If use of F8 are unable to work.
This 400MB you see have nothing to do with the Toshiba recovery image. This small partition is owned by the operating system.
One thing confuses me in the history. It is the use of recovery disks.
You have created recovery discs using the preinstalled Toshiba recovery disc creator?Generally the recovery disk contains all the important data for the installation of the OS, so I put t understand how you can get this message.
-
How can I delete file from HARD drive recovery?
I burned a copy of the HDD recovery folder and would now like to delete the original folder on my hard drive that I need the space.
Unfortunately I don't seem to have permission to make changes to the file.Any suggestions? (I'm a noob in vista)
Thank you
> burned a copy of the HDD recovery folder
I think this will not help you if you would try to recover this file of HARD drive recovery once again!
You need a recovery disk! This disc would only create a HARD disk partition once again!This means that you must create the recovery disk, first using the Toshiba recovery disc creator! This tool is preinstalled!
So after you have created a successfully recovery disk, you can try to delete the folder from the HARD drive. But to be honest, I don t recommend this I want to say that this folder can be very useful in the future in case something goes wrong with your system
However, I think that you cannot delete it because you don t have permission to admin
You can try to disable UAC first
Disable UAC is as easy as start > run > msconfig > tools > disable UAC > Ok. -
Change hard drive between 2 laptops
At work, we use the same models of laptops, HP Probook 4510 s. Now, I need to swap hard drives between two of them, as it stops because it's hot. Of course, this now happens after the warranty.
Should I do this swap of problems?
Although the same model, the Windows authentication system will see this as a new motherboard. However, because they are the same model with the necessary BIOS table must self authenticates without any problem and in all probability, you will in fact see nothing wrong.
The most common cause of overheating is the radiator for the cooling heatpipe CPU system get cluttered with dust. Any portable reasonable technician should be able to solve this problem pretty quickly in less than an hour.
-
Organizer delete the catalog and hard drive?
I take multiple pictures of the same thing with the intention to keep only one. How can I delete the ones I don't want to catalog and hard drive using Organizer?
charlesp73927950 wrote:
I take multiple pictures of the same thing with the intention to keep only one. How can I delete the ones I don't want to catalog and hard drive using Organizer?
You highlight the files to delete (Ctrl-click to select) and simply press the delete key. You get a dialog box with a check box to specify whether you want also deleted from the disk.
-
A1103 new Ram and HARD drive will not start
Hello.
I have a Mac mini A1103. When I got there the folder flashing with question mark. I got a macbook earlier where this problem was solved by installing a new hard drive. so I ordered a new 160 GB IDE 2.5 "5400 RPM and 1 GB Corsair Valueselect DDR1 333 MHz hoping that this will help me get the mini running and preforming a little better with 512 MB of Ram.
When I boot the mini after swapping ram and hard drive I always see the same flashing folder. I can reset the NVRAM Boot, enter diskmode target? (I think) and the Boot Manager.
When I enter the Boot Manager I can see the following screen
a few times I get to this screen for Open Firmware screen where I can use certain commands such as vram-reset reset-all rebot and so, but sometimes I'm just stuck on this screen.
Anyone have any suggestions on what is wrong and what I can try next? I do not have the boot original dvd but I have a usb bootable with IOS 10.6 and a dvd with IOS 10.6 (not original) but I can't get botting from any of the devices.
A Mac Mini A1103 has a G4 Power PC processor and cannot be greater than 10.5.8. Superior OSX versions require an Intel processor.
In this statement "a usb bootable with IOS 10.6 and a dvd with IOS 10.6 (not original)" I think you mean OSX, not of iOS. You must obtain a copy of the original installation disc which was 10.3 or 10.4 or disk to upgrade to 10.4 or 10.5 full retail. Coverall A1103 all three 2005 models of the Mac Mini G4.
You cannot use a grey disc unless it was delivered with your specific Mac. Native gray disc with Macs and can not e used on the other model of disc.
You can probably call Apple and order a copy of the original disks
-
23 - f270: RAM and hard drive one device?
Hello
I had recently a hard drive has failed/bad in my computer that was just out of warranty, so I took my computer to a computer repair man who said he could replace the old/bad disk with a new one. This man didn't really hold up to the end of his contract, and now I find myself in a dispute with him as he always has my HP PC and he gave me a lesser Dell as if to replace. Now, I contacted the office busniness better for resolving this dispute. But it is now trying to claim that he gave me the HP drive hard and RAM unit. This man gave me was a rectangular metal box telling me that it was the old bad hard drive. So what I need to know is are the hard drive and RAM in this a model room? I need proof that if the RAM is not present, he was the one who pulled it and sold it. They only gave me one of the components of the computer, and I would like to know if the RAM and hard drive are one or two pieces of sepearte?
Thank you
Hello
RAM and hard drive (HDD) are two different things. Your machine has 6 GB of RAM, which means it has 2 sticks, and 1 TB of HDD (1 unit). His record:
http://support.HP.com/us-en/document/c03801226
Kind regards.
-
Satellite L70-A-139 - guaranteed zero when removing the cover for the RAM and HARD drive
Hi all
I have a Satellite L70-A-139 youcef.
And at the back of the laptop, there is a cover that is fixed with a screw.Wil I void the warranty when I unscrew and take a look?
I want to upgrade my HDD to SSD.
The motherboard supports Sata III: D.Thank you!
No, the mandate must still be valid.
There is a removable cover at the bottom of the unit as shown here:
[Toshiba Satellite C70 / C75 / C70D / C75D / L70 / L70t / S70 / HARD S70t drive replacement procedure | http://aps2.toshiba-tro.de/kb0/CRU3703HG0000R01.htm]Then you should be able to upgrade the RAM and HARD drive.
I think this info should be mentioned in the user manual too. -
HP touchsmart 300-120: the replacement and hard drive and memory
Hello
I get the error message "bootmrg is missing. I have tried everything to solve this problem and finally told me that I needed to replace the hard drive. Since I have to replace it, I want to upgrade. I would like to know what the greatest memory and hard drive, I can go for this model... HP TouchSmart 300-1020.
Thank you
Good to hear that diagnosis proved to be positive. You just saved yourself some time and money.
-
Satellite A50: Question about type RAM and HARD drive
Anyone out there who would try to open their laptop Toshiba Satellite A50, what type of RAM and hard disk of brand you all have inside?
All the portable toshiba comes with Toshiba RAM and hard drive?Hello
As far as I know the Satellite A50 uses DDR PC2700 modules. These modules must be compatible:
PC2700 256 MB (PA3311U - 1 M 25)
PC2700 512 MB (PA3312U - 1 M 51)
1024MO PC2700 (PA3313U-1M1G)There are different models of Satellite A50, but I think that there should be a drive HARD IDE(ATA-6) 60 GB 4200 RPM with 8 MB buffer size.
Here is all the information I found.
-
Satellite A300: Delete files from HARD drive recovery - how to download missing files
Hello.
I format partition D:, where was a HARD drive recovery file, now I can't recover my PC.
Can simple question, I download this file from a Web of Toshiba site or from another site?You can not download files from HARD drive recovery or recovery image.
You can order the DVD of recovery from here:
http://backupmedia.Toshiba.EU/landing.aspx
Maybe you are looking for
-
Cannot type in the address bar of safari on iPhone
IiPhone 6, iOS 9.2 whenever I run the application impossible to type in the address of safari window. Can stick favorite use, but can not enter something again. Other applications work fine. powered and restarted three times.
-
OK button on one/two messages button is a kind of police bad
Hi guys! I installed SP1 LV2010 and now I have some problems with the message of one/two button. Maybe for three key also. If I did not define a constant to the message button, this happens: The OK button nothing like OK. If I put on a constant and w
-
How to remove obsolete and unremovable NDIS miniport filtration unit
Vista Business 32 bit Sunbelt Personal Firewall 4.6.18xx has been used for a long time on this pc.We decided to remove this firewall because it leaves to the intensive BSOD.Sunbelt Firewall filter has been applied. After the firewall removal Vista De
-
error code 66 has during updates
Hi community I need someone to help me solve my problem on error code 66A whenever I update to my windows always 66A pls error code help me guys... Thank you!
-
Deploy file JAD - force overwrite old version
Hello I'm deploying an application via a JAD file available on the ' net, currently if the user has an older version of the application it asks confirmation to overwrite. Is there a way to specify the application to always replace the existing files