Shared copy actions and objects with the new settings

Similar Questions

• Satellite A100-225 keeps freezing and crashing with the new HARD drive

  Hi all

  I have a Satellite A100-225 with a 100 GB SATA Hitachi drive I int it that recently started showing bad sectors. Then I bought a Hitachi 320 GB SATA II drive to replace it. I tried the drive and it was recognized right away, so I didn't need to change the SATA speed. I ran the restore a disk installed newest. The problem I have is that the computer keeps freezing and crashing with the new drive. It takes a lot of time to load up when turned on and there is a noticeable to untermittant delay when you drag the cards around solo.

  I tried to run the Hitachi drive test and it comes back fine. I also tried to turn the SATA speed of the drive down from 300 to 150 via the firmware, and although I saw a slight improvement, it is still not right.

  I talked to Hitachi and they say that he could not be 100% compatible, so the problems. Someone at - it else sucessfully set up a replacement for this notebook drive and if so what make and model. Has anyone else had simular problems?

  Thank you

  Years ago, I've updated yet more former Satellite M70 with SATA HDD (270 GB if I m remembering well) and everything was fine.
  In my view upgrade with SATA HDD normal shouldn't be a problem. Do not SATA II because it will not work faster.

  I can't say for sure, but there must be a compatibility problem.

  Let's see if someone else had better luck with the upgrade of the disk on the Satellite A100.

  Have you checked this forum with advanced search option? Maybe you can find some old NET on upgrade the HDD on A100.

• How do monitors vecteurscopes and waveform with the new update in first Pro CC?

  How do monitors vecteurscopes and waveform with the new update in first Pro CC?

  Press the COLOR at the top of the interface or go to the window workspace and select Lumetri Scopes.

  If you are a reverence for the old spans: there have been removed in favor of the Lumetri Scopes.

• I had the previous version of the Adobe Reader software, and I put in the comments of the editor. As reove, replace text, etc. And now with the new version of Adobe reader, they seem to have disappeared all of them, except perhaps the reminder.

  I had the previous version of the Adobe Reader software, and I put in the comments of the editor. As reove, replace text, etc. And now with the new version of Adobe reader, they seem to have disappeared all of them, except perhaps the reminder.

  Hi Mariam,

  Please try this:-with your PDF document open, click on the "comment section" on the side right of your document, under "list of comments", click the "Filter comments" icon and choose "View all comments" or "hide all comments.

  

  I would like to know if it works.

  Kind regards

  Nicos

• Question "BOLD" of blackBerry Smartphones and synchronization with the new Media Sync for Mac

  Someone at - he had problems with the new media manager not achievements the media in the "BOLD" card, it worked for my curve but not the "BOLD" it says for me to insert the press card. I tried formatting, but still used hired there is one in there to transfer my iTunes. Any suggestions?

  I just tried sync'ing a playlist from iTunes to my "BOLD" w / Media Sync and it worked fine. I don't have a memory card either. It took two trials - the first doesn't seem to work, but the second went without a hitch. You have your "BOLD" value will automatically switch on the mass storage device when connected to your Mac - I do not know if it would make a difference.

• Delete and synchronize with the new iTunes library

  I recently got a new MacBook Pro and put in place a new iTunes account using my apple ID. I was previously using a PC computer and buys a different apple for iTunes id. My phone is synchronized with the computer and transferred all my purchases to my computer, but not my apps. But now it is said to bring anything to my new iTunes, I need to erase and sync, then I can put on the new iTunes things. It is said that it can only be synchronized an iTunes at the same time, but what is it clear? If she will take just the back upward, that's fine. I'm just confused about what is clear and what will happen if I clear its contents. Any help is appreciated.

  sbe1998 wrote:

  I recently got a new MacBook Pro and set up a new iTunes account using my apple ID. I was previously using a PC and buy a different apple ID for iTunes.

  Why did you create a new AppleID?

  You can't transfer purchases to the new AppleID.

  You can update old AppleID if you have the new email address.

  Just copy the entire folder/iTunes / / Music from PC to Veronica on your Mac.
  That's all you need to do.

• Cancellation of AP invoice and updated with the new Bill

  Hello
  
  I want to cancel an invoice when the billing currency does not match the currency of payment and need to create a new invoice with the same data with billing currency
  and the amount must be converted into the currency of payment. anyone can guide me.

  Hello.

  Ask the Bill then Bill Actions/Cancel. Enter a new invoice with the correct currency.

  Octavio.

• How do I record an action and save under the new name of file - automatically?

  SO, I want to create a droplet that converts a batch of photos in b & W and records them in a different folder with the suffix "bw".

  Is this possible?

  Thank you

  I use the version 2.3.0 and you can get it from Russel Brown Scripts page Page of Scripts.

  By the way, you are probably trying to use the file > Scripts > Image Processor. Image Processor Pro will be available from the file > Automate menu and tools > Dr. Brown Services > Image Processor Pro in Adobe Bridge. Watch the video tutorial on the page that opens when you click the link above. Video and download link are available under: Adobe Photoshop CS5 panels & Actions/CS6/CC.

• out with the old and in with the new

  my old warrior, the a6440a is dying like Cleopatra... slow and theatrical... I don't mean to save the inevitable final spasm

  HP processor intel core 2 duo

  E 4700 @ 2.6 GH

  2 GB OF RAM

  HARD DRIVE 500 GB

  32 bit 'vista '.

  my interest is in the hp 200q series.

  first of all, what are the options would you choose? I like the video and photographic works... my only big is windows 7 Professional...

  my backup on western digital external hard drive will be useful to transfer data to the computer in windows 7?

  can the "virus program" transferred from the old machine to the new one? It's all just updated by download... it is "norton".

  I would appreciate your wisdom and advice...

  oooooo, can I have your old?, I like theatricality.

  Very few emissions if everything can be transferred, they muyst be reinstalled.

  I like Microsoft Security Essentials, free and very good software AV.

  Get at least 4 GB of memory, a lot more if you change the video

  Don't know what type of backup did you? But yes, an external hard drive is ideal for moving data from 1 PC to another.

• HP 550: updated hp 550 memory and cpu with the unconventional settings. is not ideal, but not other choice

  HI guys, I hope you can help or at least give a point in the right direction. I am a freelance photographer with a large part of the suite creative Adobe CS6. After a disaster of a week, I came home to find the motherboard on my editing station is fried somehow. I don't know what happened though I wouldn't put past my inattention of roommates.
  I'm desperate. I have to finish my current job until I'm able to afford to buy a replacement. So I have to rely on stop-gap measures, in desperation to finish my project, that are less than ideal, but so far are doing better than I'd hoped.
  Im a photographer, Capture One, Adobe Photoshop Lightroom, Adobe Photoshop and Premiere Pro are the go for workaholic applications that I need to work. without them I have no income. in order to have this machine run these applications,
  the machine I have left is an old hp 550 that was gathering dust in the closet. It was built for 32 bit Win XP and in no case is designed to run adobe products food pork I use, particularly of Lightroom.
  Unfortunately PS with Lightroom and first are 64-bit programs and LR and first are hyper threaded. so I did some research and with the help of the list of the utility windows 7 Advisor to upgrade instructions, I was able to get windows 7 Pro 64-bit to install and run.

  I know that this is not the ideal machine or the situation, but for a few weeks, I need to make it work.

  I really just 2 simple questions. First of all, I went to the HP technical support. but they were not useful. as the guarantee of the laptop are long gone, they would be not even polite and basically told me to shove off. Then on another forum, I called back and comes with a knowledge it all who constantly insisted on the fact that there was no way no how this pc could run 64 bit win 7, which i thought what am I seeing things? It works very well for 3 months. So I decided to come to you. your forums were useful on many occasions.

  Basically, I need this machine to run these programs during the next month or two, until I can buy a new machine.

  essentially, what I want to know, it's the motherboard support an upgrade of the processor? and if anything goes, what do you suggest as a substitute, given my needs? The Core 2 duo is the bare minimum of what I can limp with like photo/video rendering times are excessively slow.

  then I was talking to the support staff essential tech upgraded memory. and possibly set the bios to force to run 8 gigs of ram. They said that they have cold cannot find any version of bios that would make that possible, but only by forcing already run 64 bit, which has already allowed the pc to use the full 4 GB of ram, which was impossible in the 32-bit format. He suggested that I buy 2 4 gig modules such as 4 GB DDR2 PC2-5300 unbuffered NON - ECC, 1.8V 512Meg x 64 which can be seen at http://www.crucial.com/usa/en/memory/ct51264ac667 and try to install the full 8 concerts and see what would happen, saying that he had a feeling that I might get lucky. his logic is that the 64-bit system already open the ram limits and who knows, you can't make an omelet without cracking of eggshells! It seemed very optimistic. So, what do you think? It seems likely you because I love to work. or do you think the guy was a quack? and this whole endeaver is a waste of time and money?

  also, any other suggestions on how to time this month long storm that do not involve suggestions of buying new machines would be appreciated!

  so that you have accurate details below are my system specs.

  Hewlett-Packard HP 550 F05
  System serial number: CNU90716GN
  Inventory number: CNU90716GN
  Chassis serial number: CNU90716GN
  Case type: portable

  Windows 7 Professional (x 64) Service Pack 1 (build 7601)
  Install language: English (United States)
  Local system: English (United States)
  Installed: 04/08/2014-18:21:11
  Start mode: BIOS (Secure Boot not supported)

  Processor and b main circuit
  1.80 GHz Intel Core2 Duo processor
  cache of 64 kilobytes main memory
  secondary memory 2048 k-cached
  64-bit ready
  Multi-core (2 total)
  Not hyper-threaded Board: Hewlett - Packard 3618 KBC Version xx.xx
  The bus clock: 200 MHz
  BIOS: Hewlett-Packard 68MVU worm. F05 19/01/2009

  Readers of memory Modules c and d
  2320.47 GB drive hard usable capacity
  959.16 gigabytes of free disk space

  HL-DT-ST DVDRAM GSA - T50L ATA Device [scanner]

  Hitachi HTS543216L9A300 [hard drive] (160,04 GB) - drive 0, s/n 090108FB0200VCCPYM3B, rev FB2OC40F, SMART location: healthy
  ST1000LM 024 HN-M101MBB USB Device [hard drive] (1000,20 GB) - drive 3
  ST310005 USB Device [hard drive] 28as - 1 player
  WD 1600JS external USB Device [hard drive] (160,04 GB) - disc 2, s/n WD - WCANM2342148 4088 usable MB installed memory

  Slot ' DIMM #1' has 2048 MB (serial number 0000202 A).
  Slot ' DIMM #2' has 2048 MB (serial number 00004042).

  Thank you friends! I can't wait to read your tips!

  Jodie

  Here is the Manual:

  Repair manuals

  Unfortunately, the maximum configuration is a processor T5670 1.8 ghz and 4 GB of DDR2-667 memory, you already have. The CPU includes the 64-bit instructions is not surprising, that it can run Windows 7 64-bit. My best advice is to save your money for when you can get a real working machine. The only other likely to help is a solid state drive, you might use in the laptop and then also use the new computer that you intend to buy.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Photosmart 8450 prints only black and white with the new Mac with OS 10.6

  I just bought a new Mac with OS 10.6.  (former was OS 10.5)  Now my Photosmart 8450 will print only in black and white.  I installed the single upgrade on the site of HP, no change.

  Is there an other update I need?

  You want to disable automatic session opening, which may be why it behaves in this way.

  Go to System Preferences

  Go to security

  Under "for all accounts on this computer", place a check mark next to 'turn off automatic connection.

  In addition, I do not know if you set a password for the test account, but put something simple as 123 - just something / anything.

  Once that is done, choose log in the Apple menu, or reboot. This should bring you to the login screen where you can specify the account to enter.

• Thunderbird ceased to send and receive with the new update of Windows 10.

  Thunderbird ceased to send and receive e-mail. When I tried to send I got: "the message send failed.
  The message cannot be sent because the connection to the Outgoing server (SMTP) smtp.comcast.net was lost in the middle of the transaction. Try again. "My email loads on my tablet is not comcast. Firefox works is not my internet. Clues?

  Please start * Windows * safe mode with active network
  -win10 http://windows.microsoft.com/en-us/windows-10/change-startup-settings-in-windows-10
  Always in Windows safe mode, start thunderbird in safe mode
  - http://support.mozillamessaging.com/en-US/kb/safe-mode

  Problem disappear?
  Just reply to inform us of the results.

  Do you have non-comcast accounts where this does not happen?

• to change my earpiece and charger with the new, but they are not defective can I use guarantee of my iPhone to exchange them then?

  I bought my iPhone almost a year ago and he still has warranty valid

  If I want to get new headphones and charger but they are not otherwise defective

  so is it possible that I get new ones even if they are not defective?

  N ° guarantee replaces the defective do not part to which you have become dissatisfied.

• A loop script with the new settings

  I'm doing this script works in a loop and change settings at each new loop:

  var layerRef = app.activeDocument.artLayers.getByName("1");

  layerRef.visible = true;

  function saveJPEG (doc, saveFile, qty) {}

  saveOptions var = new JPEGSaveOptions ();

  saveOptions.embedColorProfile = true;

  saveOptions.formatOptions = FormatOptions.STANDARDBASELINE;

  saveOptions.matte = MatteType.NONE;

  saveOptions.quality = quantity;

  doc.saveAs (saveOptions, saveFile, true);

  }

  saveJPEG (app.activeDocument, new File('~/Desktop/1.jpg'), 10);

  The script makes no later than '1' visible and save it in JPEG as 1 ".jpg". In the second loop I need to make the 2 visible layer (Layer 1 is still visible - layers are mix) and save it as 2.jpeg. In the third loop: layer 3 and save the 3.jpeg file, ect...

  Thank you.

  G > > >

  Add a counter of the loop variable, and then use this counter to change numbers:

  var count = 1
  for(var=0;i		   

• Install old HDD to the pc with the new HARD drive and operating system different?

  Hi, I recently ripped my old laptop that no longer works, after buying a newer laptop 4 years ago. The new laptop has Windows 7 Ultimate 64 bit installed while the old machine had Windows Vista installed. I want to put the old HDD in my new machine to extract some files that I want to keep and possibly use this particular drive as a disc of extra storage without having to turn it into a portable device. Would that work or would I meet problems with him? It would be just a plug & play this sort of thing (as the old HDD already has an operating system installed) or the old drive (vista) would cause the new drive (win7) fails at startup?

  And sorry if this has already been covered. I searched through the questions asked previously and has not really found a similar job.

  You can use your old drive, but you should check that the "Boot order" is the most recent Player listed before the old drive. If need be exit and save your BIOS boot becomes.

  Next

  After you have started since the new drive, you may need to take ownership of the files you need to copy.

  To take ownership of a file or folder

  1. open Windows Explorer and locate the file or folder you want to take charge.
  2. right click on the file or folder, click Properties, and then click the Security tab.
  3. click on advanced and then click the owner tab.
  4. click on edit and then do one of the following:
  To change the owner to a user or group that is not listed, click other users and groups and enter the object name to select (examples), type the name of the user or group and then click OK.

  To change the owner to a user or a group is listed in the change owner to box, click the new owner.

  5. (optional) to change the owner of all subcontainers / folders and objects in the tree view, select the Replace owner of subcontainers and objects check box.

  Then use 'Disk management' to delete all existing partitions and reformat the old drive.

  J W Stuart: http://www.pagestart.com