recreate the partitions etc. on w7 dv6 and tools (after erasing disk full)

Similar Questions

• WhatsApp works do not last night... When I opened the app, it shows white screen and closed after a certain time.

  WhatsApp works do not last night... When I opened the app, it shows white screen and closed after a certain time.

  Try to do these steps, it should help:

  1 check WhatsApp update: Open App Store from your iPhone, click on updates, check if the application needs to update.

  2. restart your iPhone: hold down the sleep/wake button to it turn off and then turn it on again.

  3. close the app: multitasking opened by double pressing the Home button, slide the nonresponse apps up to close.

  4. go in the settings, press Whatsapp, touch turn off everything except mobile and notofications data.

  5. return to the home screen and open whatsapp.

  6. go in the settings, press Whatsapp and turn back.

  7. open whatsapp again. It should work now.

• is it possible to save the Office XP for multiple monitors and restore after using the laptop in mobile mode?

  Is it possible to save the Office XP for multiple monitors and restore after using the laptop in mobile mode?

  Hi Kenelms,

  You can follow this link & check if it helps.

  HOW to: Set up hardware profiles for laptop computers in Windows XP

  Hope the helps of information.

  Please post back and we do know.

• I recently change the Image to fill the browser on my templates A and B.  I erased completely all my content on the pages of the site.  What?

  I recently change the Image to fill the browser on my templates A and B.  I erased completely all my content on the pages of the site.  What?

  The image is perhaps in a layer above all the other layers.  I'm no expert with Muse, but I learned by experience that the order of your layers and property matters a lot.

  John

• I have a problem with a box that keeps going on my menu when it scrolls down, and I tried everything. "Send backward", recreate the box, etc. Help, please

  The box continues to go on the menu when you scroll, I sent the box back and the bar menu at the front, etc.. Help, please!

  Hi Emily,.

  Please check the placement of this box in the layers panel.

  Kind regards

  Akshay

• Help to remove the partition on a hard drive and data recovery

  I have two hard drives in my PC, the C: drive is 80 GB, and the F: drive is 120 GB.  The second drive (120 GB) is divided into two partitions.  I just deleted the partitions and makes the hard drive again in a single disc, however I had some important files on the F: drive that I thought I had copied to the C: drive but they are not there.  Is there anyway that is using the software I can return the drive to two drives and recover my data, please help

  Hello

  First of all, do not use the hard drive. This can make things sunk. A few things may already be unrecoverable. I would even delete the drive letter to stop inadvertently automated processes to use.

  There are two ways I can think of.

  1. buy a partitioning software disk that supports the undelete partition. On windows XP PartitionMagic was a very good product if symantec will still sell it. Given that Symantec has continued to develop, I had to switch to product partition Paragon. Sound was trash to some things, cloning in particular a double boot with loads of partitions - it has an undelete function which I didn't use. The fact that you have created a new partition could mean that the restoration may not work. You may need to delete the current, probably empty, partition everything first and then perform the restoration.

  2. buy a data recovery software that will scan the hard drives, including the unpartitioned space. I chose R-Studio and it was very good stuff even recovery from hard drives that fail. It was not 100% effective, but it is perhaps down to the severity of failure rather than the product. In situations like yours, it was very effective.

  Please mark this as useful or response if applicable.

  Tricky

• The partitions of a distributed system and custom map of cooking.

  Hello
  
  I'm experimenting with custom (schema-class) media card to distribute the game. I see one instance of my card is created and it is used to store data from all partitions hosted by JVM.
  
  My question is
  In case of transfer of the partition, how one partition data will be removed from the backup card. It will require complete sweep on keySet()? It will be done in parallel with the cache operation (on partitions of transfer / other partitions)? I ask, because I want to know what use of concurrency should support application card customized to be used as background of the cache of distribution.
  
  Thank you.

  Hello

  Organizing data for the partition (for example due to failover) transfer requires an iteration of the set of keys. However, only the partition in question must be locked; other partitions owned by the same cache service can still be repaired. The lock is managed to a level of internal consistency.

  3.5 consistency, a key iteration is no longer necessary, to reduce the overhead of the transfer of the partition.

  Thank you
  -Rob

• Desperately need help - "the partition table on device sda was unreadable." Erase all data?

  I'm forced to install CentOs on my Macbook using a machine virtual (VMWare, which is what I downloaded my teacher recommended). It's for my first class of operating systems, so bare with me because I don't know anything about operating systems (except about how to use Windows and my Macbook). I am also a daughter, what makes my same technical knowledge that much more rare. However, I am eager to learn...

  In any case, I downloaded them both. When I launch Fusion, I choose the file> New> install Windows or another OS on a virtual machine> continue without disk> click on the button that says 'Operating system installation disc using image file'> then I select the appropriate iso CentOS (CentOS - 5.4 - i386-bin-1of6) file> continue> drop down lists, I choose LINUX as operating system and Red Hat Enterprise Linux 5 as my Version> continue-> finish (no customization settings). It appears the screen of CentOS and I am invited by a text asking me if I want to install in text or graphics mode. (Don't know what to do here, but I select the graph). A bunch of white text scroll a screen of black background, then a blue screen shows up saying: 'Welcome to CentOS' at the top and a gray screen that says "to start testing CD media before installation OK press. Choose Ignore to ignore the media test and launch the installation. "I click on the red button (even once, if it is incorrect, let me know). A few rows of white text on black background (from anaconda... something on a video card...) then a nice graphic display of CentOS which I click NEXT. I then select English as my tongue (twice) and I gives me the message:

  "The partition table on device sda (VMware, VMware Virtual S 20473 MB) was unreadable. To create new partitions, it must be initialized, cauing the loss of all DATA on this drive. This operation will replace all choice on what players to ignore previous installation. You would like to initialize this drive, erasing all THE DATA? »

  I have no idea what to do here. I googled the message and others have been too, but they can talk about some hard file (and I have no idea what it is, and I can't seem to find mine).

  I can't lose what's on my hard drive (my school, music, photos, applications, files etc.). Clicking YES will erase my HD? I'm terribly afraid. I need to get this thing installed so I can do my operating systems class work, but I don't know if I did the installation correctly so far and especially, what to click at this point. Can someone help me out please (I spent 4 hours on this one today. "I have no one else to ask)? Finally, the installation is almost done after this step?

  Any help at all would be so greatly appreciated.

  I do not use Fusion, but I have VMware Workstation on Windows. I went through the same process that you went through. The answer to your question is that when you choose the operating system you install and you choose the option for the installation disc, it creates a virtual hard drive for you, size 20 GB. When they ask you to erase the hard drive, it's clear that virtual you create, not your actual computer hard drive. You can check by looking at the properties of the hard drive on your computer. It's probably 250 GB or 500 GB or something big like this. The CentOS WARNING speaks of a 20 GB hard drive, which is the size of the disk that VMware Fusion (and Workstation) create for CentOS.

• I get error: "the file or the C:\$Secure directory is corrupted and unreadable" after running chkdsk.

  I ran chkdsk utility and he stopped to say that I had a hard drive error or something like that. so I cancelled it. now I get all these things popping up that says ' the file or the C:\$Secure directory is corrupted and unreadable please run the chkdsk utility.» My question is if I run it again and it stops I have to do? I also need to know why I get the installer of windows popping up for office 2003, when I already have? I tried to reinstall with a drive, but my computer won't let me?

  original title: chkdsk utility
  original title: I ran chkdsk utility and he stopped to say that I had a hard drive error.

  I ran chkdsk utility and he stopped to say that I had a hard drive error or something like that. so I cancelled it. now I get all these things popping up that says ' the file or the C:\$Secure directory is corrupted and unreadable please run the chkdsk utility.» My question is if I run it again and it stops I have to do? I also need to know why I get the installer of windows popping up for office 2003, when I already have? I tried to reinstall with a drive, but my computer won't let me?

  What you need to do before anything else, it's everything and nothing important to you and to the stability of the machine (your ability to rebuild from scratch) backup because chances are - you will be rebuilding this computer from scratch and everything on this hard drive will be erased.

• Unable to write the email in the box to the letters. Make sure the file system allows write privileges, and you have enough disk space to copy the mailbox.

  How to make sure the file system gives me write rights? This started last night on my Dell desktop running Windows 10, I also a Dell laptop running Windows 10 and my emails come on it without any problem, but the Office of my home computer is so I need to get my emails on this work. Please answer as soon as POSSIBLE with everything you might need me

  you have an anti virus? try to turn it off.

• The size of my custom start page is limited to the size (length) of his tab and does not open format full screen.

  The start page is glued on its tab and will only change the size with an arrow of sliding between the tongue and the following.

  Opening in the sidebar is the default value for the bookmarks created via a link or a button on a Web site.
  
  You can view the properties of a bookmark using the context menu in the side bar (Ctrl + B).
  
  In the Bookmark Manager (bookmarks > organize bookmarks) you can click on the button more in the lower details pane on the right.
  
  Make sure "Load this bookmark in the sidebar" is not selected.

• What is the difference between a disc image and a backup to disk

  I use backup to disk, but have been informed to the disk image is faster and takes less space

  Hello

  A disk Image is a copy of the contents of the disc at the time, she did. An Image of the system cannot
  be restored in its entirety.

  What is a System Image
  http://Windows.Microsoft.com/en-us/Windows7/what-is-a-system-image

  Restore your computer from a system image backup<-- see="" the="" warning="">
  http://Windows.Microsoft.com/en-us/Windows7/restore-your-computer-from-a-system-image-backup

  =====================================================================

  A backup copy can be complete or partial, and even incremental.

  Backup and restore
  http://Windows.Microsoft.com/en-us/Windows7/products/features/backup-and-restore

  Back up and restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/back-up-and-restore-frequently-asked-questions

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Error "Windows has stopped this device because it has reported problems (code 43)" after the computer start in low resolution and remains after the connection

  Original title:

  Problem occurs intermittently, but almost every time at the first start the morning. The problem can be seen during the POST and the rest after logon. After several reboots, he can come good, but at the next restart could be bad. One clue is that the Device Manager said that to display card NVIDIA Ge Force 8400 GS that "Windows has stopped this device because it has reported problems (code 43)." Driver update says I have the latest driver insalled, version 8.17.12.9573. Help, please

  Have you tried to update your BIOS? Are there updates the firmware for your video card?

• Problems with the screen resolution, Cloud based software and Photoshop after the last round of updates Windows 8.1.

  Original title: screen resolution problems.

  Since the last series of Windows 8.1 update the resolution of my monitors has been changed for the worse. I use an AOC 2367 M (resolution 1920 x 1080) as my first monitor and a 42 inch Sony Bravia (resolution 1920 x 1080) as my 2nd monitor. The changes are more noticeable on the Sony Bravia and any adjustment I make to the resolution only make worse it.

  I also have problems with some software clouds as I load using citrix and when I try and navigate once opened software, I can't because the pointer selects a point about 50 mm on the side of the where he is hovering. In fact it is very difficult to open and close as anything and I resorted to the laptop to get concrete results.

  Photoshop now also comes up with a message when I open it up to inform me that the monitor profile seems to be defective.

  Any suggestions would be helpful as I thought initially an another upgrade must follow to correct the ills of windows 8, but appears not to have happened.

  Hi Joseph,.

  Thanks for the reply.

  Method 1:

  I suggest you to download and install all Windows updates available including optional updates. You can also install the latest device drivers for all devices including display drivers and monitor drivers on the manufacturer's Web site.

  http://eSupport.Sony.com/Perl/select-System.pl

  http://www.aocmonitorap.com/root/ANZ/download_driver.php

  Method 2:
  Adobe Photoshop CC version 14 is compatible with Windows 8.1. See Windows Compatibility Center for more information. To solve the problem with Photoshop CC, I suggest you try the procedure described in the article and see if it helps.

  Cloud applications help creative /CC crash immediately after launch
  http://helpx.Adobe.com/Photoshop/KB/CC-applications-crash-immediately-launch.html

  If the problem persists, I suggest you to contact the Support from Adobe.

  http://helpx.Adobe.com/contact.html

  To solve the problem from software hosted accounts, you may need to contact the Support to count.

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Problem of DH handshake with the web service using ColdFusion 7 and 8 after java update 8

  ColdFusion 7 and 8 are provided with a variant of JRE1.6.

  I have a script that has consumed a web service for years with success.  Last week, the web service provider updated their version of Apache and Java on the server java 1.8 (or java-8).

  I could no longer consume the web service once the web service provider updated to Apache and Java and would be the following error DH keypair every time that I try to consume the service:

  -----------------

  AxisFault

  faultCode: {http://schemas.xmlsoap.org/soap/envelope/} Server.userException

  faultSubcode:

  faultString: javax.net.ssl.SSLException: java.lang.RuntimeException: could not generate keypairs DH

  faultActor:

  faultNode:

  faultDetail:

  {}http://xml.apache.org/axis/} stackTrace:javax .net .ssl .SSLException: java.lang.RuntimeException: could not generate keypairs DH

  at com.sun.net.ssl.internal.ssl.Alerts.getSSLException(Alerts.java:190)

  at com.sun.net.ssl.internal.ssl.SSLSocketImpl.fatal(SSLSocketImpl.java:1591)

  at com.sun.net.ssl.internal.ssl.SSLSocketImpl.fatal(SSLSocketImpl.java:1554)

  at com.sun.net.ssl.internal.ssl.SSLSocketImpl.handleException(SSLSocketImpl.java:1537)

  at com.sun.net.ssl.internal.ssl.SSLSocketImpl.startHandshake(SSLSocketImpl.java:1130)

  at com.sun.net.ssl.internal.ssl.SSLSocketImpl.startHandshake(SSLSocketImpl.java:1107)

  at org.apache.axis.components.net.JSSESocketFactory.create(JSSESocketFactory.java:186)

  to org.apache.axis.transport.http.HTTPSender.getSocket (HTT... ''

  -----------------

  I asked the service provider web, why it would stop working and how we can solve this problem.  They suggested that upgrade to the latest version of Java on my server running ColdFusion.  I did some research and found the problem to be with the amount of memory allocated to the variable containing the encryption key.

  The big problem is when I tried to update java on this particular server (Windows Server 2003), the installation has returned a messaged stating that he could not run on the older operating system and I need to update my OS to install java.

  Does anyone have a workaround in ColdFusion 7 or 8 that you can establish the DH handshake using Java 1.6 on your local server while consuming a web service on a server using Java 1.8?

  Hi, frank000000,

  I know that we had a serious problem with any Java 7 after update 25.  They are off a lot of network permissions and other things, for safety, that used to be available in versions prior to the update 25.  But it's while we were in CF Server 9.

  Since we switched to CF Server 10 (making sure that we got the CF Installer provided with Java 8), we had very few issues related to Java.

  It seems strange to me that the upgrade to 1.8 host while your server is 1.6 would cause problems.  It could very well be something else.  I would like to ask the host for documentation describing exactly how/why their 1.8 may cause interference with your 1.6.

  HTH,

  ^_^