Shared folders and Windows November 10 update

Similar Questions

• Shared folders - upgrade Windows 10 of 15.11.

  Hello

  yesterday has been saved by Microsoft Windows Update 10.

  as I can no longer change le shard records as network drive.
  it is the host vmware "'' is no longer found () net use z:" ","\ vmware host\Shared Folders'). ""
  
  Anyone has a solution for this?
  
  my computer:
  Apple Mac mini with el captiain, VMware Fusion 08:02 with windos 10 pro 64-bit

  
  

  Eckhard

  Hello

  I'm the developer for the VMware Shared Folders feature.

  The problem is caused by the Microsoft updates, destroying the registry settings.

  After the upgrade, you just need to check and restore the registry setting below and everything should start working (for folders).

  (No need to uninstall and install again, as this will also restore the registry, but takes significantly more time.)

  All you have to do is to change the registry

  HKEY_LOCAL_MACHINE\ SYSTEM\CurrentControlSet\Control\NetworkProvider\Order

  Name: ProviderOrder

  Type: REG_SZ

  Data: "RDPNP, LanmanWorkstation, webclient.

  Change it to:

  Data: "vmhgfs, RDPNP, LanmanWorkstation, webclient.

  Exit the registry application

  Then you'll then readers of shared folders and the UNC paths accessible once more. No need to reboot or log off. No need to uninstall and reinstall the tools.

  It has also been noted in wire Re: support Windows 10

  Hope this saves time to users.

  Also when I was at Microsoft earlier this year test Win 10 and shared folders, I and others (for redirectors) says the guys from the migration of this question and they promised it would be fixed.

  Steve

• Working in a virtual machine of shared folders and not another...

  Hi, I'm new to the community but have worked with VMWare Workstation for about 9 months now. I have a set of 5 VM that I run on a regular basis, and I had successfully implemented the shared folders in each VM to a central folder on my C: drive host. I now have new versions of several of the virtual machine and I am trying to configure access to the same shared folder, but it will not be displayed.

  After you set up the information in shared folders in the virtual machine settings, I go into the virtual machine on my computer and expect to see under readers network, "Shared Folders on .host '. Who does not appear and when I try to map a network drive to //.host/Shared files /, it can't find the network.

  I compared the parameters between a virtual machine that has the Shared folder working and one who does not work, and I can't seem to find any differences.

  Here are some of my system details, if it helps:

  VMWare Workstation Version 6.5.2 build 156735

  Host of OS = Windows Server 2008 (64-bit)

  VM OS = Windows Server 2003 (32-bit)

  I've updated the VMWare tools in the virtual machine

  I have ideas of what I can try to get this working. Thank you!

  Try to upgrade the virtual hardware version 7 - maybe it does.

  Why don't you use the entries for the disks in cluster? -of course, you know that they are not stable in WS 6.5

  ___________________________________

  VMX-settings- VMware-liveCD - VM-infirmary

• Sharing Samba and Windows 7

  Hi friends,

  I have the ASUS RT-AC51U router and I created a Samba share on the hard drive connected to the USB port of this router.

  My current laptop running Windows 7 computer (and connected router to above) can see the share under 'Network' - I can also read/write in the files/folders when the guest connection is enabled for my part.

  Problem when I allow the connection of user/password for my part - My Windows 7 can still see Samba share and list of all the folders under 'network', but I am not able to open the files when I provide my username/password (Samba share user/pwd is different from my Windows user/pwd) in the dialog box

  I get the error is that I don't have permission to use this network resource

  I tried to enter my user/pwd following combinations and all these not don't work.

  (1) user-name/pwd

  (2) group work-user-name/pwd domain\username

  (3) router-ip\user-name/pwd

  Thank you in advance for reading and replying to this message.

  Nitin

  Hi Nitin,

  Thanks for posting your query in Microsoft Community.

  This problem may occur if the permission setting is incorrect. To resolve this issue, please see the following steps:

  First of all, if you have any firewall or antivirus program installed, please disable it:

  Step 1: Change the settings of working group:

  1. Please make sure that these machines are in the same workgroup:

  To change the settings of working group, please see the following steps:

  1. click the Start button, then right-click on computer in the right pane and select Properties.

  2. in the name of computer , the domain and workgroup of the window system settings section, click change settings.

  3. on the System Properties dialog box the computer name tab, click change.

  4. in the change of the name or the domain of computer dialog box, type the name of the working group used by the other computers on your network in Workgroup, and then click OK.

  If the problem persists, please refer to step 2:

  Step 2: Advanced sharing permission

  1. in Windows 7, right click on the shared folder and then click Properties.

  2. click on the tab share , click Advanced sharing. Check share this folder .

  3. click on the permissions button, click Add.

  4. highlight the account that you want to share this folder to (name of account that will have access to the file), and then check the box allow for total control.

  5. If the list is not the name of the account, please click on the Add button. Type everyone , and then click OK.

  6. click everyone in the list of users and check the allow full control check box in the "permissions for everyone" pane and click apply, click OK.

  Please see the article below that can give you complete instructions on connecting to another network and file sharing.

  View and connect to available wireless networks

   

  Share files with anyone

  File sharing essentials
  Sharing files using public folders
  

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• Sharing folders and files

  Dear all:

  I have a question about Windows 8 OS with files and sharing folders. I shared a "folder on the drive C" and my "D" drive, the permision hand tap setting are "" everyone: reading, my user account: full control, administrators group: full control ' , and on the Security tab permission are the same thing. " But when I access my file and the D drive, it displays the error message 'you are not allowed to use this network resource, the Server service is not started'. but I can access to the my files and folders after a few minutes later. Please help me...

  Lak you

  Dear all:

  I just did the job now by:

  • Set up automatic Server Service starts at Start UP
  • Change the setting of early sharing

  

  • Turn off sharing profile user, then share a specific foler choose in advance the sharing

  Please try your if you have the same situation.

• Shared folders and drive Z

  I just upgraded from Vista to Windows 7 on my Macbook, the latest version of Fusion 3.  A close I would say file sharing does not work.  When I look at the computer ads I see "(shared folders).
  (VMware-hôte) (z) "and it is X - ed out with a big red X.  Save one of my applications in a shared folder and now it won't work.  It is said that he cannot access the shared folder.  Also, when I ask to install VMware Tools, it fails at some point again due to the inability to access shared folders.

  Anyone know why this is happening and how to fix it?

  Glenn Gabanski

  1. turn off the shared folders

  2 uninstall, not fix, VMware Tools

  3. open shared folders

  4. install VMware Tools

• Inspiron 11-Windows, November 10 update causes white screen

  Everything worked fine with Windows, 10 July upgrade of 8.1.  Then Windows 10 update in November 1511 causes deadlock blank screen.  After trying everything I could think I touched the screen and Windows suite to start normally.  I've updated the BIOS, I reinstalled Windows 8.1 then installed Windows 10 July build and everything works fine.  November update automatically installs and the problem comes back.  I disabled the function of quick start and came back to the old drivers.  No change.  Problems is still there.  I have no device USB and no software/apps not installed at this time.  Dell support spent a lot of time with me on the phone and tried everything and NO success.  Problems is still there.

  This sounds like the same problem, I got several weeks back, when I upgraded my Dell 3148 of the original Windows 10 (build 10240) to Windows 10 1511 (build 10586).  I lost almost a whole day trying to figure what happened.  Here's what I found...:

  My 3148 worked perfectly with Windows 8.1 - everything was fine.  When I upgraded to Windows 10 build 10240 in August, it was working fine as well.  When I upgraded to Windows 10 build 10586 in November, the system would block at the start, a black screen.

  In my case, I have determined that the cause of the hang is the Synaptics touchpad.  If you uninstall the driver for the touchpad (falling back to the default Windows for the touchpad mouse driver), then the laptop starts fine.  But you lose gestures, acceleration, etc. with the touchpad, which was really annoying.

  I tried to back out the Synaptics driver to a previous version (did not help), I tried to back out the Intel I2C driver to a previous version (did not help either).  I gave image laptop computer by using the recovery DVD, then upgraded to Windows 10 build 10586, then accrued all the drivers of Intel system and the Synaptics driver to the original (working) Windows versions 8.1 and it did not help either.

  I tried all the drivers Windows 10 new on Dell 3148 support site and it did not help - the laptop hangs just at the start.

  So basically the Windows 10 TH2 10586 build will not work on the Dell 3148 at this time.

  Ultimately I gave up and reconfigured to 8.1 Windows again and disabled all Windows 10 forced upgrade of reminders that pushes Microsoft (using http://blog.ultimateoutsider.com/2015/08/using-gwx-stopper-to-permanently-remove.html that works very well).

  I hope that Dell (or Microsoft) solves this serious problem of compatibility, because I really want to use Windows 10, but he has basically no longer works.  At the present time I am back on Windows 8.1 and the laptop works fine once more.

  I hope this helps... and Dell if you read this, please someone look at this...!

• Windows Update not working do not Error Message and Windows Defender cannot update Error Message definitions

  I have a laptop Dell 1501 with Vista Home Basic 32-bit.

  I ran CA 2010 Security Suite and you have scanned for Malware with regard to the Windows Update Error Message. He found none. I ran Microsoft Malware malicious tool, and it found. I ran Windows Defender and he found. I don't have CA and Windows Firewall to protect my computer and I have disabled both in trying to solve this problem of Windows Update and Windows Defender.

  I got this error 4 days ago. Here is what I tried:

  -I went on various Web sites, including Microsoft Support - and tried to solve the problem through services.msc and msconfig.exe. None worked.

  -J' noticed in msconfig. where it says start waiting next to Windows Update. There are 3-4 elements, which are affiliated to Windows Update and made sure they did not exist in the registry.

  -J' have to ensure that they were supposed to be automatic or manual under services.msc.

  -J' rebooted several times and nothing changes.

  Windows Defender does not update the definitions, and I do not know if this coincides with the release of Windows does not.

  I am at my wit's end and do not want to crash and burn my computer.

  I need serious help. Please, I beg you!

  Thank you.

  LRR100

  I had to call Microsoft. Alex tried to add registry keys and input upgrade.

  My Windows Update has almost been altered. It could be my mistake or it has become corrupted when running other services at the same time.

  I was sent a Windows 7 Home Premium Disc to upgrade and start over, as my Vista disk was corrupted as well.

  I would not recommend trying one of the suggestions listed on other sites. It's my personal opinion because I have in the past and it worsened my problem.

  I also wouldn't delete all programs (unless absolutely necessary) because I remove 4 MSMXL and he made their work more difficult.

  ________________________________________________________________________________________________________________________________

  Sometimes the only solution is to call Microsoft and they will evaluate if a charge of telephone support is necessary from the outset, before they run for your problem.

  Despite what you may have read, Microsoft Technical Support technicians are very efficient and kind.

  We inform you to open a slot during your day or even open your day for the problem to be solved.

  Mine took 2 1/2 hours, and they had to remind me the next day to make the order for the disk because it could not be done the same day.

  The more patient and kind you are, the best representative.

  Hope this helps and thanks for reading,.

  LRR100

• I'm having a problem with sharing folders on Windows Server.

  Until this sharing folders to another user, I use the windows login password to access the folder

  How to use a different password, if I want the user to access, but I don't want to create another user account?
  I had trouble creating permissions of the user if I need to create user accounts.
  With the help of Windows Server R2
   
  Original title: sharing folder for the particular user using a different password for password sharing

  Hi jytan,

  Thanks for posting in the Microsoft Community.

  You have a problem with sharing folders on the computer. You might have tried a number of troubleshooting steps. The efforts you have put in are commendable. I appreciate it.

  I would have you post your query in the TechNet Forums because it caters to an audience of it professionals. Your question will be better addressed there.

  Check out the link-

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  We know if you need help. We will be happy to help you. We, at tender Microsoft to excellence.

  Thank you.

• vmrun shared folders and

  I tried almost all of the combinations that I can get and the web search (and especially these forums) for a response, so I apologize if that's the answer somewhere.

  I'm trying to use virtual machines to run my compilations automated nightly and other compilations. of course, I have to use vmrun. What I can't seem to make it work using a shared folder to access the source files. I know that is the problem and not the mechanic that I use to start the compilations because I can copy the source to the virtual computer and use the same procedure and it works.

  Here is the proposed process:

  vmrun start < vmx > nogui

  Sleep.bat 240 (batch file for ping n %1, etc., to expect that the VM comes well enough)

  echo net use Y: '\\vmware-host\Shared Folders\job_share' /p:no > C:\run\run_net.bat

  vmrun t ws - gu < user > gp - < pass > copyFileFromHostToGuest < vmx > C:\run\run_net.bat C:\run\run_net.bat

  vmrun t ws - gu < user > gp - < pass > runProgramInGuest < vmx > C:\run\run_net.bat

  echo of Ant-f Y:\build.xml > C:\run\run_ant.bat

  vmrun t ws - gu < user > gp - < pass > copyFileFromHostToGuest < vmx > C:\run\run_ant.bat C:\run\run_ant.bat

  vmrun t ws - gu < user > gp - < pass > runProgramInGuest < vmx > C:\run\run_ant.bat

  vmrun stop < vmx > soft

  I tried to use enableSharedFolders and addSharedFolder. I read somewhere that you need to map the folder "net use". I tried to run with - interactive and - activeWindow, once again read somewhere that - interactive uses different processes to enable shared folders that are already enabled in the VMX, but when I use - interactive to run Ant batch file, it the error that the user must be connected in interactive mode.

  Technically, I could copy the sources on the virtual computer files before compiling and it works. but there are many, many source files it is not practical. I don't know there is something I'm missing, but I am at a loss as to what. Help, please.

  There is no need to map the shared folder. the UNC path is available after you have enabled the shared folder for the customer.

  -interactive and - activewindow requires a user connects. You use Autologon to have a connection to the virtual machine? Oterwise, leave the settings

• After update to 10.11.5 I may more access shared folders/printers Windows PC network

  My Mac repeat myself "you are not allowed access to this server." whenever I try to connect to a shared folder on a Windows 7 PC. Also, I can't print on a shared printer connected to a Windows PC.

  These two things worked perfectly before the update. Nothing has changed on the PC.  I tried to restart both computers. I tried without sharing and re-sharing the folder on the PC. The folder is configured to allow "free access" to "everyone" access as guest.

  Any suggestions?

  No problems like that here (post - 10.11.5). But inter-networking with windows has been hit or miss as long as I remember. Good luck finding the bug...

• Blocking of ThinkPad 8 Windows November 10 update

  My Thinkpad 8 running a Windows 32-bit Pro generic picked up 10 installation update 1511 10586 build yesterday and I tried to install it. Twice, the installation hangs at the helm of the 40%, during the "installing devices". The tablet itself is not blocked, for example, it stores keys and finger swipes, and the screen turns with orientation of the tablet. But after two attempts, the second a night, there is no progress.

  I guess a driver issue, but it seems there is no paper left behind. After power is turned off the power and restart, the Tablet he goes back to the previous version, and there is no new breadcrumbs to help diagnose.

  Anyone else seeing a similar thing? Ideas?

  No, the log is here, but I saw something useful because the configuration basically hung and the system restored.

  However! I've used the Panel of control-> Security and maintenance-> view reliability history to generate a report, and he was able to capture a problem. The update has been logging a 0x8024200D failure, which leads to this knowledge base article:

  https://support.Microsoft.com/en-us/KB/947821

  There, he recommends running the tool "dism" from an elevated command prompt:

  DISM.exe / Online/Cleanup-image /Restorehealth

  I ran this and it connected that some corruption in the local repository has been found.

  I started the manual update method by going here:

  https://www.Microsoft.com/en-us/Windows/Windows-10-upgrade

  Will report back later.

  [EDIT]

  Success. Completed the update restarted and the table is running 1511.

  If it affects everyone, please try the above and mark it as a solution, as appropriate.

• Steam HP x 360 11: windows November 10 update

  Hi, several months ago I updated my x 360 11 for windows 10 stream. everything went smoothly and works perfectly. Now there is a new update to windows 10. This update that I was not able to install. After you download the update automatically, follows a screen with the installation process. Now I'm stuck and says I need 5 GB of free space to be updated. There are also two options: launches for free disk manager space or attach an external with at least 10 GB to this topic. certainly don't have 5 GB of free space on the internal memory. I don't want to uninstall all applications that I have, I have doubts of the update of data space. Ive attached an sd card with enough space and a HD them selected in the screen but still wants to have 5 GB to install the update. Any procedure of updating without deleting and reinstalling all the applications and data. Thank you

  I'll try it tonight and you know it, but sounds as if it will not solve the problem. Thank you

• Folders and Windows Explorer

  Hi, I had problems recently with Windows Explorer and folders. When I click on a folder, it appears in the Internet Explorer icon and I want to change it back to open in an icon of folder, not the icon of Internet Explorer, what can I do? Please help me. Thank you.

  Hi hyooft567,

  Try the following steps:

  Step 1:

  1. right click on the folder that you want to change the icon of

  2. Select 'Open file location'... it's just above "Properties".

  3. Once you are in the 'file Location', right-click the folder that you want to change again

  4. Select 'Properties' down

  5. Select 'Customize' tab to the right...

  6. the 'Change icon' button is at the bottom

  Step 2:

  I suggest you to check if you are facing the same question in the new administrator account.

  Create a new user account-
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  If you are not faced with the same question in a new user account, you can view the link below and use the steps provided to fix a corrupted - user profile
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  It will be useful.

• shared folders (host: windows server 2003, ubuntu reviews)

  Hi, I'm under VMware Player 3.0.1 on Windows server 2003.

  I built a WM with a host-only connection, and I'm under Ubuntu 2.6.28 on it.

  I want to just copy some date from the host to the host.

  I created a folder on the host (windows) and I checked it in the file sharing settings in the virtual machine settings.

  My problem is that I don't know where I can see this folder on my ubuntu (guest).

  Any idea?

  Thank you. Overview

  Shared VMware folder do not need a network connection.

  However, they are not necessary for a network connection, you can use the card AMD PCnet32 driver. But the VMware tools are highly recommended and necessary for shared VMware folder Option.

  Remember to switch to standard network shares.

  AWo

  VCP 3 & 4

  Author @ vmwire.net

  \[:o]===\[o:]

  = You want to have this ad as a ringtone on your mobile phone? =

  = Send 'Assignment' to 911 for only $999999,99! =