Shared library error Variable deployment-2147220735

Similar Questions

• Shared Variable deployment error

  I need to use Variables shared in my code, and when I try to run the code I get the following error.

  My computer deployment
  Ventilation Library.lvlib\\169.254.192.23\Ventilation library of deployment deployment has failed (error:-2147220712, MAX: internal error (Hex 0 x 80040318): the customer has failed to connect on the server configuration, perhaps because the server is too busy or encountered an error of communication.) Note: the steps that you did which led to this error and contact technical support).
  Completed with errors of deployment

  The code was working yesterday with shared variables, but it won't deploy today and I can't imagine any changes that I made to do this. I tried to run the code on my cRIO and the PC. I have used amd 2015 2014 and I get the same error on all.

  Any help with this problem would be great.

  What is the IP 169.254.192.23? It looks like an auto-negotiation-to-peer (e.g., crossover) connection IP or the IP address of your computer on the network?

  Is the library with shared variables located under 'my computer '? If you right click on 'my computer' in the project - he shows here? IP address you think it correct?

  If you check the custom address 'specify' and put 127.0.0.1 (loopback IP address), it works?

  I also look in Windows Services and verify that the shared Variable service (and other services OR that it requires) are running.

• Shared in Teststand variable: error-17500

  Hello

  I'm trying to deploy a shared library that contains shared variables that I use inside step (screws). But I have error-17500 poping up-to the top whenever I'm trying to deploy it (see attached photo).

  It says that I need the module "the remote execution..." Why is this?

  I tried to access all users of remote machines (as advised in TS Reference Manual) but I have error-17502 poping up-to the top (see photo 2). Is there a reason for this?

  Hello

  This problem is now known by us on TestStand 4.2.1.

  One solution would be to circumvent the TestStand step by:

  -deploy the variables shared by using a LabVIEW LabVIEW VI is installed on the computer

  -creating an application (Installer with LabVIEW Run-Time, OR Variable engine) for this purpose that will deploy the variables so there is no LabVIEW software installed on the computer.

  Best regards

• Deploy the shared target rt variable fails (crio-9073)

  I use a cRIO 9073 with LabVIEW 8.6. I have some variable published to my PC network I want the cRIO host read. However when I try to deploy the variables on the cRIO, I get the following error:

  Initializing...
  Calculating dependencies...
  The checking for conflicts. This may take some time...
  Prepare the items for download. This may take some time...
  Variables variables.lvlib\\129.186.159.84\robot robot deployment deployment has failed (error:-2147220721, (Hex 0x8004030F) the configuration database cannot be opened, perhaps because of corruption.) Note: the steps that you did which led to this error and contact technical support).
  Completed with errors of deployment

  I tried to reinstall the software on the cRIO, which includes the network Variable 1.5.0 engine and tried hosting variables on the cRIO. I still get this error.

  Everyone knows about this problem? What should I do to use variables shared on the 9073?

  I tried stubborn MAX, who did not work. Then I reformatted the cRIO and the problem is solved.

• Error message "unable to load the shared library.

  I try to get my programs for school to work, and I get these error message whenever I try to run anything. The last line of the State of deployment is as follows:

  Deployment time get NLVSim and isAcceptedStep.vi IsAcceptedStep.vi and NILVSim get busy with errors on the target and has been closed.

  LabVIEW: Unable to load the shared library NILVSim.*: SIM_GetTimeAndIsAccepted:C. make sure the library is present on the target of RT. Either MAX allows you to install software from OR or FTP to transfer custom RT target libraries.

  I tried everything I can think of to fix this. I checked NEITHER Max and I'm all for date on the software. I reinstalled LabVIEW twice, and I reset my myRIO. My classmates do not experience problems with getting theres to work. I start to lose hope and hope someone might know what the question. Thank you for your help.

  WubaDee,

  NILVSim is part of the LV Control Design and Simulation Module. This one is correctly installed on your Windows development system and you installed it on your myRIO?

  Norbert

• Attempt to package a jar of shared library in the ear file. error wlappc

  I try to deploy files jar like shared libraries and decided to follow the recommendation to wrap the pots inside the separate ear files. I include all the modules in the ear, because each of them is designed to be deployed as a shared library. Jar files are placed in the APP-INF/lib directory. The manifest file in the directory META-INF of the ear contains name information and the version of the extension that I would use for these pots. When I run wlappc in my build the wlappc generates an error. I ran weblogic. DDConverter on the ear and the same error was generated. See below. Apparently, the error is caused by the fact that I do not declare all modules in the application.xml file. I found several examples of how package libraries with the help of a war. Even looking at the files in the C:\bea10.3.3\wlserver_10.3\common\deployable-libraries . I found no examples using the Archives of the ear.
  
  My question is how can I do this. I'd rather do not creation of dummy modules. The documentation seems unclear to me in this area. I would really appreciate the help on this ASAP.
  
  I use Weblogic Server 10.3.3
  
  
  DDConverter error message
  
  + < 30 August 2010 11:12:00 CEST > < error > < J2EE > < BEA-160197 > < cannot load the descriptor weblogic.application.ddconvert.ConvertCtx$VJarResourceLoader@17590db finder: weblogic.utils.classloaders.CodeGenClassFinder@17943a4 annotation: null module /META-INF/application.xml. The error is weblogic.descriptor.DescriptorException: VALIDATION of the PROBLEMS have BEEN FOUND.
  problem: cvc-complex - type. 2.4 c: expected for item 'module @http://java.sun.com/xml/ns/javaee' before the end of the item application @http://java.sun.com/xml/ns/javaee content: < null >
  + weblogic.descriptor.internal.MarshallerFactory$ 1.evaluateResults(MarshallerFactory.java:245) +.
  + weblogic.descriptor.internal.MarshallerFactory$ 1.evaluateResults(MarshallerFactory.java:231) +.
  + weblogic.descriptor.internal.MarshallerFactory$ 1.createDescriptor(MarshallerFactory.java:155) +.
  + weblogic.descriptor.BasicDescriptorManager.createDescriptor(BasicDescriptorManager.java:323) +.
  + weblogic.application.descriptor.AbstractDescriptorLoader2.getDescriptorBeanFromReader(AbstractDescriptorLoader2.java:788) +.
  + weblogic.application.descriptor.AbstractDescriptorLoader2.createDescriptorBean(AbstractDescriptorLoader2.java:409) +.
  + weblogic.application.descriptor.AbstractDescriptorLoader2.loadDescriptorBeanWithoutPlan(AbstractDescriptorLoader2.java:759) +.
  + weblogic.application.descriptor.AbstractDescriptorLoader2.loadDescriptorBean(AbstractDescriptorLoader2.java:768) +.
  + weblogic.application.ApplicationDescriptor.getApplicationDescriptor(ApplicationDescriptor.java:301) +.
  + weblogic.application.ddconvert.EarConverter.convertDDs(EarConverter.java:59) +.
  + weblogic.application.ddconvert.DDConverter.runBody(DDConverter.java:155) +.
  + weblogic.utils.compiler.Tool.run(Tool.java:158) +.
  + weblogic.utils.compiler.Tool.run(Tool.java:115) +.
  + weblogic.application.ddconvert.DDConverter.main(DDConverter.java:175) +.
  + weblogic. DDConverter.main (DDConverte +)
  
  My Application.xml. The problem persists once I deleted the < library-directory > element.
  
  + <? XML version = "1.0" encoding = "UTF - 8"? > +.
  + < application xmlns: xsi = "http://www.w3.org/2001/XMLSchema-instance" +.
  xmlns = "http://java.sun.com/xml/ns/javaee" xmlns:application = "http://java.sun.com/xml/ns/javaee/application_5.xsd".
  xsi: schemaLocation = "http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/application_5.xsd".
  ID = 'Application_ID' version '5' = >
  + < display name > coreEar < / name >.
  + coreEar < description > < / description >.
  + APP-INF/lib < library-directory > < / library-directory > +.
  + < / application > +.
  
  My weblogic application. XML
  
  + <? XML version = "1.0" encoding = "UTF-8"? > +.
  + < wls:weblogic - application xmlns:wls = "http://xmlns.oracle.com/weblogic/weblogic-application" xmlns: xsi = "http://www.w3.org/2001/XMLSchema-instance" xsi: schemaLocation = "http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/javaee_5.xsd http://xmlns.oracle.com/weblogic/weblogic-application http://xmlns.oracle.com/weblogic/weblogic-application/1.1/weblogic-application.xsd" > +.
  + < wls:application - param > +.
  + < wls:param - name > webapp.encoding.default < / wls:param - name > +.
  + < wls:param - value > UTF-8 < / wls:param - value > +.
  + < / wls:application - param > +.
  + < wls:fast - swap > +.
  + < wls: activated > true < / wls: activated > +.
  + < / wls:fast - swap > +.
  + < / wls:weblogic - application > +.
  
  My EAR/META-INF / "MANIFEST. MF.
  
  Manifest-Version: 1.0
  Ant-Version: Apache Ant 1.8.1
  Created by: 1.6.0_21 - b07 (Sun Microsystems Inc.)
  Built by: weblogic
  Specification-title: coreEar
  Specification-vendor: Picot Entertainment Systems, Inc.
  Specification-Version: 1.0
  Implementation-title: coreEar
  Implementation-vendor: Picot Entertainment Systems, Inc.
  Implementation-Version: 1.0
  Extension name: com.picot.sempre
  WebLogic-Application-Version: v0.1b
  
  My APP-INF/lib/corelib.jar/META-INF/ manifesto
  
  Manifest-Version: 1.0
  Ant-Version: Apache Ant 1.8.1
  Created by: 1.6.0_21 - b07 (Sun Microsystems Inc.)
  Built by: weblogic
  
  
  My EAR archives broken
  
  coreEar.ear
  + > APP - INF +.
  -> classes
  -> lib
  -= coreLib.jar
  -> META-INF
  -= MANIFESTO. MF
  -> com /.
  
  + > META-INF +.
  -= MANIFESTO. MF
  -= application.xml
  -= weblogic.application.xml

  You must create at least a model Module...
  Because the Standard EAR file must contain at least one valid... WAR... EJB jar... .or an ordinary Java Module.

  Please rerfer to: http://weblogic-wonders.com/weblogic/2010/06/22/how-to-build-ear-application-for-weblogic/
  Your Exception clearly said... There is no present valid Module in your "application.xml" file which is the root cause of this issue.

  NOTE: Still, if you do not want to create a Module inside your Application of EAR... then you can go ahead with the optional Packages. Optional packages also provides the same functionality as shared libraries... In this fit you can deploy a Plain Jar file on the server as an optional package, and other Applications can make reference to it. Like this: http://weblogic-wonders.com/weblogic/2009/12/06/optional-packages/

  To see an example of it, you can do refers to: http://forums.oracle.com/forums/thread.jspa?messageID=4439423 during the last answer of mine I have Pasted a link to Test case that I've developed for demonstration... http://www.4shared.com/file/aaudoKO-/Hibernate_Shared_Lib_Demo.html (around of-2, 1 MB size)

  The J2EE specification says: you must have a valid Module (war, ejbjar or simple Module Java) defined in the application ".» XML"of your Enterprise Application.
  .
  .
  Thank you
  Jay SenSharma
  http://WebLogic-wonders.com/WebLogic/ (WebLogic wonders are here)

• Error during the generation of shared library for OSX

  Hello

  I am trying to build a shared library (.framework) using LabVIEW 2011 as Mac.

  My Version of OSX is 10.7.3.

  When I run the build process, TI allways give up showing the error message:

  There is 1 error in DLL - C compile Source File.vi Possible reason (s): you must have the Apple Developer tools installed to build a shared library. Install the Apple Developer tools and attempts to reconstruct the shared library.

  I don't know what developer tool is missing or if there is another problem with my environment.

  Thank you

  Gschwert

  Hi Gschwert,

  in the meantime, I received a response from our developers in Austin.

  Developer Tools Apple which refers to should be X-Code.

  They work with X-Code Version 3.0 and have no problem. They will try to work with your versions (4.2 and 4.3) too and take a look, if there is something special to look for.

  Have you tried using X-Code 3.0? Then you get the same problems?

  Good day

• Error during import Shared Library: library specified for this node was not found or could not be loaded

  Hello

  I use LV-2009 for Linux. I am creating a Wrapper Vi. I have a simple addition of C++ function that I created a .h header file and a shared .so library. After you import the shared library, I get an error report, I joined here (Report.doc).

  When I right click on the Subvi and click on configure to mention the .so library path, I see a window saying "file not found. The file may have been moved or delete", even though I have this library in the path that I've specified.

  I've attached a screenshot of the error I get. Please suggest what can be done.

  Thank you.

  Kind regards

  -H.

  
  

  
  

• Deploy the shared library in WebLogic by EPCO

  Hello
  
  I'm deploying in WebLogic 10.0 an EAR file as a shared library.
  
  I am able to deploy using the server administration Console, but if I deploy the EAR by EPCO, the EAR is always deployed as an Application.
  
  Is it possible to deploy with EPCO as shared library? I declare the EAR as a shared library in any file descriptor before?
  
  Thank you
  Carles.

  If you save your shared library of the EAR in the preferences under WebLogic-> shared libraries then refer to this library in an application, EPCO will deploy the shared library when the listing application is deployed.

  -Konstantin

• When deploying Shared Library, my Trinity - config.xml is not included

  Hello
  
  I've implemented my own Skinning in a little project I will deploy as a shared library.
  
  I defined my xml/css files
  

  custom.css
  trinidad-config.xml
  trinidad-skins.xml

  I created my deployment profile and set it as the library of the ADF.
  
  My only problem when I look at the generated jar, my Trinity - config.xml was not included?
  
  Any reason?
  
  Context passing:
  I intend to deploy it as a shared library in WLS so that I could drop it in my Webcenter portal.
  I posted the question to the JDeveloper forum because I thought it's more Jdev problem and not that of the webcenter.
  
  Any thoughts?
  
  Thank you

  Neliel,

  According to the literature [url http://docs.oracle.com/cd/E16162_01/user.1112/e17456/adfsg_apply.htm#BGBCDGGA], trinidad - config.xml doesn't get packed in a JAR library for skin.

  John

• How to deploy taskflow with ADFBC as a shared library?

  Dear all,
  
  I'm deploying my taskflow as a shared library in WLS and I wanted to extend the webcenter spaces using this
  taskflow.
  
  Use case:
  My problem is this, my components ADFBC a taskflow. When I try to add this as library-ref in the weblogic.xml,
  I can't see this taskflow when I go to the catalogue of resources change-> add-> add library-> Taskflows
  
  I can't see my taskflow.
  
  To validate my case:
  I created a very simple taskflow who does not ADFBC, simply the JSF UI components and I could see this taskflow.
  I continue then add to my content in a page.
  
  Is there something specific I should do with my taskflow who has configured ADFBC?
  
  Thank you

  Basically, you will need to follow the steps of 52.3 of official documentation: http://docs.oracle.com/cd/E21764_01/webcenter.1111/e10148/jpsdg_wcsres.htm#BCFDFHHH

  Basically the steps are:

  -Deploy your Jar library tasks flow ADF as Shared Lib in WebLogic (don't forget set etc. etc. of META-INF...)
  -With the "DesignWebCenterSpaces" project, enter your weblogic.xml a Ref library to your sharing-lib and configure the config.properties for deployment.

  Kind regards.

  Daniel

• How to deploy taskflow as shared library and register as a producer of portlet

  Dear all,
  
  
  I have a taskflow using some popup dialog boxes to get feedback from users.
  
  
  I noticed that when I have this deployment as a portlet and then I created a page and then unmold the portlet
  in this document, I note that the popup is only inside the iFrame portlet. Not sure but I think it's normal.
  
  Research on the forum, they say it is better to deploy as a library shared on the webcenter spaces so that
  the popup not be limited on the iFrame portlet but rather to be displayed in the window of webcenter together.
  
  But I don't know how can I deploy this taskflow as a shared library and then save it as a portlet on my groupspace producer?
  Googled around, but can't find a good resource on how to do it.
  
  Sorry for my newbie question...
  
  Thank you.

  Neliel says:

  Bijesh Krishnadas wrote:
  To be clear, if you plan to use the ADF taskflows directly in spaces, you do not save a producer of portlet. You deploy the taskflow as a shared library and add the taskflow to the catalog of resources.

  Hi Laura, thanks for the link.
  Just one question though, if I deploy my example project as a shared library and then save it as a catalogue of resources. Can I automatically deposited as a portlet in my pages Webcenter spaces?

  Thank you

  Yes, you add the taskflow via the mode of the composer.

• RSL Error 2046 when TERM-shared-library-path using Ant mxmlc

  Hi,.

  I build my project using the ant mxmlc with SDK 3.4 target

  If I < flex: mxmlc...-link-TIME-shared-library static = 'false' static-RSLS = "false"... >

  It works very well. My SWF is a bit lighter but not enough!

  If in my mxmlc, I add the following nodes (all of them or one of them)

  < runtime-shared-library-path

  Path-Element="${FLEX_HOME}/frameworks/libs/Framework.swc" >

  "< url rsl-url="${contextroot}/client/framework_3.4.0.6955.swz "/ >

  "< url rsl-url="${contextroot}/client/framework_3.4.0.6955.swf "/ >

  < / DURATION-shared-library-path >

  < runtime-shared-library-path

  Path-Element="${FLEX_HOME}/frameworks/libs/RPC.swc" >

  "< url rsl-url="${contextroot}/client/rpc_3.4.0.6955.swz "/ >

  "< url rsl-url="${contextroot}/client/rpc_3.4.0.6955.swf "/ >

  < / DURATION-shared-library-path >

  < runtime-shared-library-path

  Path-Element="${FLEX_HOME}/frameworks/libs/DataVisualization.swc" >

  "< url rsl-url="${contextroot}/client/datavisualization_3.4.0.9271.swz "/ >

  "< url rsl-url="${contextroot}/client/datavisualization_3.4.0.9271.swf "/ >

  < / DURATION-shared-library-path >

  I have a: Error #2046: the loaded file did not have a valid signature

  I thought: why not add summaries check = false to my target mxmlx?

  = > Unfortunately the ant task does not support this option

  I also read somewhere that this may be caused by the Decree of the library.

  It is true that in the case of the flex plugin for eclipse

  I put the first framwork.swc
  DataVisualization.swc and configure rpc.swc
  the EFA resulting works

  = > This makes me think that my swz are duly signed

  = > I can't find a way to make the swz ordering the ant target

  So is my only solution use the mxmlc commed-line within the ant?

  What can possibly be wrong?

  Only builds "Milestone" should have signed to RSL. The stable and nightly versions have not signed RSL. All signed RSL you might find in an Add ons download "Adobe" is there by mistake and should be ignored.

  -Darrell

• Network of myRIO Variable deployment

  Hello

  I just wanted to check how to do something.

  I have a VI I created myRIO who has used a number of variables published network shared. These variables are hosted on the myRIO. I create the app and it deployed to the myRIO as a startup application.

  I can see the variables under the myRIO on distributed systems manager.

  In order to access the variables of a LabVIEW application separate executed on the PC, I have to re - create the variables to Aliasing. (right click on the node of the library-> create tied Variables..)

  Is this correct?

  Thank you!

  Hi Nick,

  You can use screws of the shared Variable Palette to access the published network shared Variables. They are in data-> palette shared Variable Communication.

  In this case, you will need only to open the variable connection providing the refnum, containing the name and IP address of the myRIO and the data type of the variable.

  Thank you

  AREV

  CTO | RAFA solutions

  

• Unable to load the shared library LVASPT_WA.*

  Hello

  I have a hope that easy to fix the error: I want to use the function "WA Detrend' to the signal processing tool advanced in a real-time application running on a cRio 9030. When I try to run the VI I get the following error:

  ...

  Deployment NI_AdvSigProcWA.lvlib:WA decimation Filter.vi

  NI_AdvSigProcWA.lvlib:WA decimation Filter.vi loaded with errors on the target and was closed.
  LabVIEW: Unable to load the shared library LVASPT_WA.*ptDecimationFilterH:C. make sure that the library is present on the target of RT. Either MAX allows you to install software from OR or FTP to transfer custom RT target libraries.

  ...

  I reinstalled signals Advanced processing toolkit and linked things 'add new software' MAX, but the error persists.

  A picture of what the system looks like to the MAX is attached.

  Also, I Fund this post:

  http://forums.NI.com/T5/LabVIEW/problem-error-deploying-item-on-RT/m-p/3201345/highlight/true#M92822...

  could someone tell me what he means by "Please check the installation of the custom software all mode '?

  Can you telll me what I am doing wrong?

  Thank you very much in advance!

  I ran your situation in R & D, and the problem seems to be as a result of Advanced Signal Processing Toolkit is not not compatible on the x 64 under Linux RT OS in the 9030.  The product page could be clearer on this gap.  I am currently a web application to get this fixed!

  Best,

  David