MSAD question shared services configuration?

Similar Questions

• Change password for the DN of the user: (MSAD config) Shared Services

  We have the MSAD service account to configure shared with MSAD services. E.M.P. version 11.1.2.3

  As a policy, we change the password for this account. Since we do not have shared services link works in this version.

  Will work the steps below?

  1. modify the password for the service account in MSAD

  2. connect to the workspace with other admin MSAD (my user id) id

  3. change the password for Shared services configuration MSAD, under "set up user directories.

  If this approach does not work, is there another way to do this?

  One solution is to change the workspace-> administer-> workspace server

  settings-> "allow direct connection after the failure of the SINGLE sign-on:" = Yes

  This will allow you to connect without SSO assuming that there are problems with the SSO.

  (assuming you can change pw back so you can connect to the workspace).

• Hyperion shared services configuration problem. 11.1.2.2

  Installation EPM system on my laptop.
  
  ORACLE XE is already installed.
  
  When you set up for the first time... I'm giving a user id, that I created like ss on oraclexe.
  port 1521
  ServiceName XE
  ss username (I created)
  
  I just do it? .... Configuration of output saying "a serious error".

  Win XP has not been certified as a server operating system.

  Please visit: http://www.oracle.com/technetwork/middleware/bi-foundation/oracle-hyperion-epm-system-certific-131801.xls

  HTH-
  Jasmine.

• Server copy of the images between devices - break Shared Services?

  Upgrade to 11.1.2 and servers pass test to the production environment. We want to configure MSAD with Shared Services and fixed deposits on our shared production SQL Server.
  
  Our final goal is to copy the image of the 11.1.2 servers (not the shared sql server) and turn it on newer hardware.
  
  My concern is the properties/java files that can hard-code the static information that may exist on the original farm.
  
  No matter who with 11.1.2 makes a picture to another server hardware and has experienced problems of connectivity to Shared Services or repositories?
  
  JTS

  If everything has been recorded against the name of the computer, then in theory, you should be fine if everything else is to stay the same, it should allow IP address changes.
  I know that in the early days of the system 9 he had some problems with the IP being stored, but it should not happen now.
  Although I cannot give you a 100% guarantee because there is no guarantee with 11.1.2

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Hyperion Shared Services backup

  Hi all
  
  We take the backup of Domain.xml, CSS.xml, slide.properties, WorkflowEngine.properties, manage_data.properties, openldap-data & slapd.conf. Can someone let me know that contains these files and the extent of it.
  
  Kind regards
  Kris.

  Oh, if you have read the backup guide and want to know why you want to save these files? Have you looked at them in a text editor?

  If you read the three points at the top of the section Shared Services backup, you will see that these files are:
  * Shared Services application server configuration files
  * Configuration of OpenLDAP database file
  * All data and logs of OpenLDAP files

  You have found the prospect of the noninstaller on these files, so you can see what others have to say on the subject.

  Domain.XML - Looks like a configuration file for common Services, it might be important: http://docs.sun.com/source/819-0221-10/crdomxml.html
  CSS.xml - external authentication configuration file
  Slide.Properties - resembles a kind of Apache related to Shared Services configuration file could it be important: http://jakarta.apache.org/slide/wck.html
  WorkflowEngine.properties - another Shared Services configuration file (I see a pattern)
  manage_data. Properties - even once, the SSP, this one looks like a server name and port for the formidable and I hope really dead HUB
  OpenLDAP-data - a folder containing xml OpenLDAP database files
  slapd.conf - main configuration file of LDAP daemon. See: http://www.faqs.org/docs/securing/chap26sec213.html

  Kind regards

  Cameron Lackpour

• question of shared services

  Hello
  
  I have a question I'm not able to solve. We are trying to install version 11 and every time I run the configuration utility to configure with shared services. It says successful but when I validate its all red and not able to configure with shared services.
  
  I said that drop the user to the shared services will help. I did also several times. but no help
  
  any suggestions
  
  Kira

  Hi Kira,

  1. When you say user of shared services, do you mean to say 'user' of shared services? or a schema/user for shared services in oracle database terminology?

  2. If you tried to drop the user, then I have a recommendation to drop the user using "CASCADE". It helped me.

  3. try and re set it up again

  Sandeep Reddy, Enti
  HCC
  http://hyperionconsultancy.com/

• How can I delete the previous configuration of Essbase Server Shared Services?

  Hi all

  I am trying to reinstall the Essbase Server (on a new server we have upgraded the Essbase server hardware) and reloads the data, but the current installation believes that I have already set up despite the withdrawal EssbaseCluster-1 of Shared Services Application groups.  Is there something else I need to do to get the new install Essbase server configured as a new instance of Essbase?

  Thank you
  Ryan

  If the server names have been changed, then it probably won't work, but I don't know what you mean that it did not work, you should check the registry of shared services, other possibilities are reset configuration tasks in the registry by using the epmsys_registry utility.

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• Shared services registration failing when configuring EPMA 11.1.1.3

  Hi all, I am currently woking on essbase and any knowledge of planning so tried to update my knowledge. I installed epma 11.1.1.3 on workstation to VMware windows 2003 that I have windows 7 laptop. oracle 10g installation created a user/database (epma) patterns (sm, ms) is trying to set up the foundation, essbase, planning and reporting and analysis services. the configuration database and register with shared services has failed. I'm doing something wrong. I followed some configuration documents that are documented with screenshots are still unsure as to what I do. Please advice on how to avoid these failures.
  
  Here are the results of the validation of the configuration.
  
  Thanks in advance.
  Srinivas
  
  Oracle EPM system
  Diagnostic reports
  Generated 03/03/12 23:05
  Running on validation srinivas
  Validation tool Info: 11.1.1.3.0 drop 9-0 build 3129 2009-07-16 13:24
  Name of the operating system: Windows 2003
  Operating system version: 5.2
  
  
  Status Service Test Description duration of test
  Foundation of Hyperion
  A FAILED CFG: Configuration so check all configuration tasks are completed
  Error: The next tasks are not configured:
  relationalStorageConfiguration: Configuration failed
  Recommended action: try to set up the tasks mentioned 0s
  OPN FAILED: OpenLDAP Check if global roles number of not less than 16
  Error: $item.exception.localizedMessage
  Recommended action: 0 s
  OPN FAILED: connection OpenLDAP OpenLDAP
  Error: srinivas:28089
  Recommended action: open Start LDAP 1s
  The ERP Integrator
  CFG PAST: Setup WARNING: some even suggested not configuration tasks completed.
  Check if all configuration tasks have been completed 0 s
  Essbase / customer
  WR PAST: Windows registry check if EQD excel addin registered for Essbase Client 0 s
  Essbase / Essbase
  A FAILED CFG: Configuration so check all configuration tasks are completed
  Error: The next tasks are not configured:
  hubRegistration: Configuration failed
  Recommended action: try to set up the tasks mentioned 0s
  EAS FAILED: Essbase Server start the Essbase server check using the Maxl command
  Error: Result: unable to connect to Essbase server by using the command MAXL. Please check the essbase server is running.
  Recommended action: check Essbase server is started. 2 1
  SVR FAILED: external auditor Essbase Java API launch with the following command: admin C:\Hyperion\common\validation\9.5.0.0\launchEssbaseJavaAPI.bat EssbaseJAPIConnect * http://srinivas:13080/aps/JAPI srinivas
  Error: Result:-1; Error message: unable to connect to the olap service. Unable to connect to the Essbase server at srinivas. Exceeding the timeout to connect to the Essbase Agent/server using the TCP/IP protocol. Check your network connections.
  Recommended action: make sure that the external auditor is working. 7 s
  Essbase / Essbase Administration Services
  A FAILED CFG: Configuration so check all configuration tasks are completed
  Error: The next tasks are not configured:
  hubRegistration: Configuration failed
  Some of the suggested configuration tasks not yet completed.
  Recommended action: try to set up the tasks mentioned 0s
  Essbase / service provider
  A FAILED CFG: Configuration so check all configuration tasks are completed
  Error: The next tasks are not configured:
  hubRegistration: Configuration failed
  Recommended action: try to set up the tasks mentioned 0s
  Essbase / Smart Search
  CFG PAST: checking Configuration if all configuration tasks have been completed 0 s
  Essbase / Studio
  A FAILED CFG: Configuration so check all configuration tasks are completed
  Error: The next tasks are not configured:
  hubRegistration: Configuration failed
  Some of the suggested configuration tasks not yet completed.
  Recommended action: try to set up the tasks mentioned 0s
  Managing the quality of financial data
  CFG PAST: Setup WARNING: some even suggested not configuration tasks completed.
  Check if all configuration tasks have been completed 0 s
  Foundation / calculation Manager
  A FAILED CFG: Configuration so check all configuration tasks are completed
  Error: The next tasks are not configured:
  hubRegistration: Configuration failed
  Some of the suggested configuration tasks not yet completed.
  Recommended action: try to set up the tasks mentioned 0s
  Foundation / Performance Management architect
  A FAILED CFG: Configuration so check all configuration tasks are completed
  Error: The next tasks are not configured:
  hubRegistration: Configuration failed
  Some of the suggested configuration tasks not yet completed.
  Recommended action: try to set up the tasks mentioned 0s
  Foundation / workspace
  A FAILED CFG: Configuration so check all configuration tasks are completed
  Error: The next tasks are not configured:
  hubRegistration: Configuration failed
  Some of the suggested configuration tasks not yet completed.
  Recommended action: try to set up the tasks mentioned 0s
  FROM HTTP: Http is [C:\Hyperion\common\httpServers\Apache\2.0.59\bin\installhyperionapacheservice.err] s 0 empty file
  [FROM HTTP: string check Http [LoadModule jk_module modules/mod_jk] file[C:\Hyperion\common\httpServers\Apache\2.0.59\conf\httpd.conf] 0 s
  PAST REG: Register all links are present in the registry. 2 1
  Performance dashboard
  CFG PAST: Setup WARNING: some even suggested not configuration tasks completed.
  Check if all configuration tasks have been completed 0 s
  Planning
  A FAILED CFG: Configuration so check all configuration tasks are completed
  Error: The next tasks are not configured:
  hubRegistration: Configuration failed
  applicationServerDeployment: Configuration failed
  Some of the suggested configuration tasks not yet completed.
  Recommended action: try to set up the tasks mentioned 0s
  Profitability and cost management
  CFG PAST: Setup WARNING: some even suggested not configuration tasks completed.
  Check if all configuration tasks have been completed 0 s
  Strategic Finance
  CFG PAST: Setup WARNING: some even suggested not configuration tasks completed.
  Check if all configuration tasks have been completed 0 s
  Financial management
  CFG PAST: Setup WARNING: some even suggested not configuration tasks completed.
  Check if all configuration tasks have been completed 0 s
  Reporting and analysis
  CFG PAST: checking Configuration if all configuration tasks have been completed 0 s
  SVR FAILED: external auditor Essbase Java API launch with the following command: admin C:\Hyperion\common\validation\9.5.0.0\launchEssbaseJavaAPI.bat EssbaseJAPIConnect * http://srinivas:13080/aps/JAPI srinivas
  Error: Result:-1; Error message: unable to connect to the olap service. Unable to connect to the Essbase server at srinivas. Exceeding the timeout to connect to the Essbase Agent/server using the TCP/IP protocol. Check your network connections.
  Recommended action: make sure that the external auditor is working. 1 1
  
  Test start time: 23:05:18
  End of test time: 23:05:40
  Test duration: 21s

  Hi Srinivas,

  I suggest you to do separately from the configuration of the different components. First you configure shared services and continue with the other components.
  And also using the same relational database for all components is not recommended.
  Doing so will make you empty the things about it you give and would be easy to fix too.
  And I'm sckeptic on your database connection.

  Few things to check before you start the configuration.
  1. check are you can connect to the database on firewall problems.
  2 and also check the timeout values defined for the database.

  Kind regards
  Pradeep

• Configuration of hyperion shared services on 11.1.2.1 reg

  Hello
  
  I installed shared services on 2 servers (Server1 and Server2) to balance the load. I have only 1 instance of oracle schema. I configured SSP on the 1 Server successfully.
  
  Now, I need to configure shared services on Server2 with the already configured oracle schema.
  Could any one pl. suggest how do.
  
  
  See you soon
  Praveen

  I assume that you have read all the documentation and understood it before proceeding with the installation/configuration - http://download.oracle.com/docs/cd/E17236_01/epm.1112/epm_install_11121/ch03s03.html

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Urgent: Configuration of the various components of Hyperion a shared service

  Hello
  
  Here are my requirements:
  
  We are updating our existing Version 6. X 7 X 11 Version EMP applications. I want to configure all applications installed in different servers in a shared service. All users belong to an Active directory only.
  
  Plan is like this
  
  Server1: Essbase component. I have almost 5 application created in this server.
  
  Server2: New Essbase. Again the application 5 is this server.
  
  Server3: Hyperion Planning,
  
  Server4: Hyperion Financial Reporting
  
  Server5: Hyperion workspace
  
  
  So, all these different Essbase and planning applications are installed in differnet servers. Can I have 1 Shared Service for all these applications. If so, can anyone suggest the approach and configuration details.
  
  Appreciate your help in advance!
  
  Thank you very much... Best regards, UB

  It should be exactly the same process as with a single instance as long as everything has been saved successfully.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• MSAd/LDAP for FDM configuration error

  I use 11.1.1.3 and configure the SSP as the authentication provider.
  
  For the FDM setup applications, I intend to use my Windows administrator account, which I also use to connect to the server.
  
  Right now, everything I have is the user "admin" by default hyperion in the native directory of shared services. I think I need to configure the windows "Administrator" account in shared services. My question is: what user directory windows are under administrator account? LDAP, MSAD?
  
  I tried to use MSAD but when I goto 'fetch DN' I get an error stating that the invalid host name or port. (I checked the host name is the name of the computer that I have, the port is by default 389)
  
  Any input appreciated.

  The only option you have is to us the native ADMIN HSS user to initially create the application, and then you can add a LDAP or MSAD provider services shared at a later date. That's what I would recommend.

• Could not connect to the workspace or shared services as a native user - Single Sign-On authentication that does not

  Friends,

  Looking for a way around the SSO and newspapers in shared using the Native sign-on admin Services. We have recently added a useer for MSAD authentiation directory. We want to change our configuration, but cannot connect to Shared Services

  Thank you!

  Yes, it is stored in the registry of the EMP, so it can be changed.

  It is under the WORKSPACE_LWA and the property is AllowDirectLogonAfterSSO

  See you soon

  John

• Shared services

  I installed and configured 11.1.2.4 recently on server r2 2012. The current environment of EMP 11.1.2.1 is installed under 2008 r2. They are currently using Essbase, financial reports and Shared Services. My question is, how do I migrate shared Services for the new facility. I read book after book and can't seem to understand.

  If someone has never successfully done it can get a walk through how?

  PS: As I have said in the past, I'm very green at oracle.

  It would be by EAS or a file system copy that you tried.

  See you soon

  John

• "Assign access control" on essbase applications through shared services

  Hi Experts,

  I just install an Essbase 11.1.2.4 environment, where I could see that the ability to assign filters to users in environmental assessments is disabled (I guess maybe it's that this version does not support the autonomous concept).

  So I thought of attribution of the filters to users through shared services groups\Essbaseinstance1\sampleapp Application - access entitlement control, but when I click on "Assign access control", it says in the right pane that the page cannot be displayed.

  Any tips?  for your information, I use IE 11.

  Thank you

  Siva

  I gather from your question that EAS runs like it enough to be upward, as you did that you have configured the web server again after that the configuration of the Regional service otherwise it will be a communication error.

  See you soon

  John

• No users in Active Directory in the Shared Services

  I have configured MSAD in Shared about, EPM 11.1.2.2 on Server 2008 R2 64-bit Windows, but no users or groups are listed.  I restarted all services of EPM and IIS.  I don't get any errors, simply nothing appear under the directory in the console of Shared Services.  How can I find out why it doesn't work?

  If you do not see users then remove the configuration of the Group probably won't do something but it does not hurt to try, if there are errors with the configuration it should be in the newspapers, are you sure that the account that you have configured the external directory with can see users, is the correct user RDN. It can be interesting to use a LDAP browser and find the same configuration to see if it recovers users, if not then you would need to discuss with someone who administers the AD.

  See you soon

  John

  http://John-Goodwin.blogspot.com/