Sharing between users of Microsoft Office on my satellite L20

Similar Questions

• How to uninstall Microsoft Office trial on Satellite A200?

  I have a Satellite A200. It came with Vista Premium, but I've since upgraded to Ultimate. It came with a 60 day trial of Office 2007, which I'm not interested. I installed Office XP (that works). However the emails etc. documents will be opening in Word 2007. Installation because this causes an error, even if it still seems to work when you get rid of the error message.

  What I really want to do, is to uninstall the trial. However he won't let me - it goes through 'Preparation to uninstall' and then disappears and nothing has changed and the program is still there. In the Microsoft Office folder, 2 versions seem to have become intertwined. I uninstalled Office XP and tried to uninstall 2007 after that, but still no joy.

  Don't know if it has something to do with the fact that the installation did not complete successfully.
  Any ideas anyone on how to get rid of it?

  Val

  Usually, you should be able to remove applications in Windows Vista-> software settings.

  What you could do is to remove the whole Office 2007. The Office usually remains files here:
  C:\Program Files\Microsoft Office

  Then you can use a 3rd party freeware application called CCleaner to clean the registry!

  * Visit also the following: *.
  [How do I uninstall Office system 2007 if you cannot uninstall it by using Add / Remove Programs: http://support.microsoft.com/kb/928218]

  [Cannot uninstall Office 2007 beta of XP or Vista | http://www.tech-recipes.com/rx/1838/cannot_uninstall_office_2007_beta_xp_vista]

  Bye and good luck

• How can I block the users access to microsoft office?

  How can I block the users access to microsoft office?

  You must set "" permission to run on each of the Microsoft Office programs (word.exe, excel.exe, powerpnt.exe, etc.) such that the group 'Administrators' and the SYSTEM is allowed to run.  To do this, you do a right click on the .exe file, select 'Properties', then click on the 'Security' tab and change security as you wish.

  If you do not have a 'Security' tab, then it is because you have XP Home Edition, or if you have XP Pro with active Simple file sharing.  For XP Home, you must boot mode safe (repeatedly tap F8 at startup key) and login as an administrator to access this tab.  For XP Pro, follow the instructions in the following article:

  "How to disable the file sharing simple and how to set permissions on a shared folder in Windows XP"
    <>http://support.Microsoft.com/kb/307874 >

  HTH,
  JW

• Microsoft Office not installed in the new user account

  I recently installed Microsoft Office 2013 month last on my Windows 7 PC.  A few days ago, I created a new user account, but for some reason, Microsoft Office is not installed on this account.  It still works fine on other accounts of 2 user on my PC, but it's just a nuisance to have to switch between user accounts to use Office.  Is anyway to fix this?  I tried to fix it on my account, but nothing seems to have happened.

  On Windows, applications are installed in all accounts. You will find some MS Office by clicking on the Globe to start / all programs, and then scroll down.

• While sharing files between users, my itunes library disappeared from these two places. How can I get that back?

  As noted earlier, all trying to share music files from itunes between users on the same computer, my library of songs and videos have disappeared.  How can I cancel this and recover my music and videos?

  Hello

  I suggest you look in the folder iTunes, if the files are present there or not. The link given below shows the default location where the files are located. If they are present, then add them to the folder. Click on the link below.

  iTunes: how to share music between different accounts on a single computer

  http://support.Apple.com/kb/ht1203

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Microsoft office 2007 error 25004 by user install not supported on vista OS

  SOMEONE HELP ME PLEASE ON THIS ERROR? I am trying to install microsoft office 2007 Ultimate SP1... but it kept showing this error in the middle of the installation.
  ERROR 25004. -BY USER DOES NOT TAKE INSTALL.

  Thank you

  Hi Pannakara,

  Please use the forum for Support of Vista,

  Please follow the instructions in this article and see if you can uninstall MS Office 2007.  After completely uninstalled Office 2007, you can reinstall it if you wish.

  http://support.Microsoft.com/kb/928218/en-us

  Let us know if it works for you, Kevin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• What will happen to my microsoft office 2007 (1 user) courses if I reinstall my vista? __

  (1) what will happen to my microsoft office 2007 (1 user) courses if I reinstall my vista?
  (2) can I install my microsoft office 2007 back if I re - stall my vista?

  Yes.

  You can reinstall your office even once on the new reinstall Vista.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows 7 Pro, download "Microsoft Office for the user final license agreement." in office 2003 programs.

  I bought a new HP with Windows 7 Pro computer, then loaded all of the software I used on my old XP system. Whenever I have start any Office 2003 application, I get a dialog box titled "Microsoft Office end-user license agreement. I have to click "I agree" before you continue. I use an old Vista solution of "as admin" and now I get a box asking if it is to change this program (register I think).  How can I stop this box to appear? Thank you.

  Hello sys169,

  Thanks for posting on the Microsoft answers Forum.

  As you encounter a problem with an office related question, it would be better to post in the forum Office.
  Please click here to post in the Forum Office of the community.

  Sincerely,
  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Sharing a VM between users on the same Mac

  I'm trying to share the VM between users on my Mac.  I followed KB1005196 instructions to change the permissions of the beam and move to the shared folder.

  The machine works well on the main account, but the other user account get the following error:

  Could not open the file "/ users/shared/Virtual Machines.localized / Windows XP Proessional 2.vmwarevm/Windows XP Professional 2.vmdk ': insufficient permission to access file.

  I am running OS 10.6.5

  VMWARE 3.1.2 (332101)

  Thank you

  Hmmm, okay let's try to change the permissions once. This time, we will also change the permissions on the entire virtual computers folder.

  Simply copy and paste each order one directly into the Terminal. Please make sure that you do this under the account mattebury on your computer.

  chmod 777 users/shared/Virtual\ Machines.localized
  chmod-r 777 users/shared/Virtual\ Machines.localized

  If you type this in manually and not copy and paste, please make sure that the R - is a capital R, not a lower case a.

  This will change the permissions on everything in and including the virtual computers folder.

  Try now.

• The adware file? -com.microsoft.office.licensing.helper.plist

  I have a MacBook Pro, Mac OS X Lion (10.7.5), Safari (6.1.6)

  I do a few the well-being of the software from my computer. I followed the instructions on this page, stop adware and pop-up advertising windows in Safari, and in/Library/LaunchDaemons, I found this file - com.microsoft.office.licensing.helper.plist

  Now, the instructions on the page in the link I shared suggests that a file in this folder beginning with 'com' and ending with '. helper.plist"is a file of adware, and there will be some 'any word' between the two." Where I am confused is that they say the central part of the file name is 'any word', but they don't give that the file name may use several words separated by periods (.) or if they are all considered a Word. He also doesn't seem to be file names using the same word in/Library/LaunchAgents or in Library/Application Support, as the instructions suggest it.

  Can anyone confirm whether or not it is adware file?

  It is not adware

• Problem to create the Internet connection sharing between Windows XP and Windows Vista.

  Original title: Internet connection sharing between Windows XP and Windows Vista.

  Hello

  Recently, I plugged a laptop running Windows XP to a desktop computer running Windows Vista using a standard Ethernet cable with the intention of use sharing of Internet connection. The notebook contains a wireless connection that I've routed to the office via the cable said.  While the initial phase of installation went well (I was too lazy to do it manually, so I just used the Wizard "Set up a home or small business network" Windows XP,) I had to turn off the host computer to install a program. When I tried to set up ICS again, I couldn't connect to the Internet by using ICS. After this failure, I tried to configure the properties of TC/IPv4 (IP, gateway by default, etc.) manually, but I still couldn't run.  I am able to access the shared host PC and client files. It seems to me that some service essential to the proper functioning of the ICS may be disabled in some way, but it's just speculation, as I have no evidence of such a service. Help would be most appreciated.

  Thank you

  FG-man

  I tried this before using a laptop to share internet with my 360.  problem is there was Nat on the router, and it is in contradiction with the ics.

  Anyway long story short I did some research on the Internet and discovered that if you're behind a router ICS will be confllict with her, as ICS also does routing. a much better option is to "bridge the conections ' on the laptop.

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/hnw_bridge_install.mspx?mfr=true

  If you go this route, you need to set a static ip address for the office,

  Either that or if you want to continue using ICS put the laptop in the DMZ in the router may help, but it will be less secure.

  Hope that this helped good luck

• Delete "Check for Updates" Microsoft Office 2010 - GPO

  I'm working on the packaging of various components of Microsoft Office 2010, such as the shared components, the Office Software Protection Platform Service, Visio (all flavors) and project (Standard and Pro).  I wanted to delete "Check for Updates" in the Help menu.  I installed the Office administrative templates on my machine to capture, added models to gpedit.msc and open administration-> Microsoft Office 2010 templates-> disable UI elements-> "disable the commands on the file tab | Help»  I ran a prescan, then I activated the strategy, checked the box to remove the "Check for Updates" and click OK.

  I open Visio and checked that the 'Check for Updates' button is greyed out.  I closed my Visio and performed a scan of post and saved the project.  I looked in all the files in the registry text.  I pulled the text below in the file HKEY_CURRENT_USER.txt, added to the lower part of the same file in my project of exisitng Visio, run build.bat, cleared out the old sandbox, launched Visio, and the button is grayed.

  My question: this application will encounter problems with Group Policy objects, or the complete isolation on these entries mode settings will be sufficient to keep the setting?

  Here is the text of registry I captured and added (also included in the attached text file):

  isolation_writecopy HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Common\Toolbars\Settings
  Value = Microsoft Visio
  REG_BINARY=#01#01#00#00#00#00#00#00#02#00#01#00#00#00#02#01#ff#ff#8f#05#00#00#01#00#18#00#00#00#10#00#00#02#02#02#fe#00#00#00#00#c8#00#00#00#23#01#da#00#eb#01#ce#02#02#01#ff#ff#f1#05#00#00#41#01#18#00#00#00#12#00#00#02#00#02#00#00#00#00#00#09#01# 00 00 # 46 # 01 # #ea #00 # #02 #de #02 4f

  isolation_writecopy HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Visio
  Value = MTTF
  REG_DWORD = # 7 a #02 #00 #00
  Value = MTTA
  REG_DWORD = # 7 a #02 #00 #00

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Group Policy\History\ {35378EAC-683F-11D2-A89A-00C04FBBCFA2} isolation_full

  isolation_full HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Group Policy\History\ {35378EAC-683F-11D2-A89A-00C04FBBCFA2} \0
  Value = Options
  REG_DWORD = #00 #00 #00 #00
  Value = Version
  REG_DWORD = #03 #00 #03 #00
  Value = DSPath
  REG_SZ ~ LocalGPO #2300
  Value = FileSysPath
  REG_SZ~%SystemSystem%\GroupPolicy\User#2300
  Value = DisplayName
  REG_SZ ~ local #2300 group policy
  Value = Extensions
  REG_SZ~[{35378EAC-683F-11D2-A89A-00C04FBBCFA2}{0F6B957E-509E-11D1-A7CC-0000F87571E3}]#2300
  Value = link
  REG_SZ ~ Local #2300
  Value = GPOName
  REG_SZ ~ local #2300 group policy
  Value = GPOLink
  REG_DWORD = #01 #00 #00 #00
  Value = lParam
  REG_DWORD = #00 #00 #00 #00

  isolation_full User\software HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Group policy Objects\ {FEBDB3C4-00BF-4F35-A94C-DAB9D5C471EB}

  isolation_full User\software\policies HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Group policy Objects\ {FEBDB3C4-00BF-4F35-A94C-DAB9D5C471EB}

  isolation_full User\software\policies\microsoft HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Group policy Objects\ {FEBDB3C4-00BF-4F35-A94C-DAB9D5C471EB}

  isolation_full User\software\policies\microsoft\office HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Group policy Objects\ {FEBDB3C4-00BF-4F35-A94C-DAB9D5C471EB}

  isolation_full HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Group policy Objects\{FEBDB3C4-00BF-4F35-A94C-DAB9D5C471EB}User\software\policies\microsoft\office\14.0

  isolation_full HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Group policy Objects\{FEBDB3C4-00BF-4F35-A94C-DAB9D5C471EB}User\software\policies\microsoft\office\14.0\visio

  isolation_full HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Group policy Objects\{FEBDB3C4-00BF-4F35-A94C-DAB9D5C471EB}User\software\policies\microsoft\office\14.0\visio\disabledcmdbaritemscheckboxes
  Value = OfficeAssistant
  REG_SZ ~ 0 #2300
  Value = GetStartedOfficeOnline
  REG_SZ ~ 0 #2300
  Value = ContactMicrosoft
  REG_SZ ~ 0 #2300
  Value = OfficeCenter
  REG_SZ ~ 0 #2300
  Value = ButtonTaskClickToRunStatusUpdates
  REG_SZ ~ 0 #2300
  Value = ProductUpdates
  REG_SZ ~ 18220 #2300

  HKEY_CURRENT_USER\Software\Microsoft\Windows NT\CurrentVersion\Winlogon\GPExtensions\ {35378EAC-683F-11D2-A89A-00C04FBBCFA2} isolation_writecopy
  Value = LastPolicyTime
  REG_DWORD = 8 # c# 50 #ff #00

  isolation_full HKEY_CURRENT_USER\Software\Policies\Microsoft\office

  isolation_full HKEY_CURRENT_USER\Software\Policies\Microsoft\office\14.0

  isolation_full HKEY_CURRENT_USER\Software\Policies\Microsoft\office\14.0\visio

  isolation_full HKEY_CURRENT_USER\Software\Policies\Microsoft\office\14.0\visio\disabledcmdbaritemscheckboxes
  Value = OfficeAssistant
  REG_SZ ~ 0 #2300
  Value = GetStartedOfficeOnline
  REG_SZ ~ 0 #2300
  Value = ContactMicrosoft
  REG_SZ ~ 0 #2300
  Value = OfficeCenter
  REG_SZ ~ 0 #2300
  Value = ButtonTaskClickToRunStatusUpdates
  REG_SZ ~ 0 #2300
  Value = ProductUpdates
  REG_SZ ~ 18220 #2300

  If specified in your package (in the virtual environment) it will be used. Something virtual will win all the conflicts with local elements (in this case deployed GPO registry keys). If you specify a setting normally applied GPOS in your package there no way to replace it by using Group Policy objects...

• Microsoft Office to replace iMac does not

  I got the transfer for the Apple store software and data from 2007 iMac (the one I'm using to write this) and iMac new 2016. The software includes Microsoft Office for Mac (a package of "Family" that could be used by up to 5 users).  After the transfer, the desktop software does not work on 2016 without "Product Key", which was printed on the box of original purchase (in an Apple store) and I do not have. I contacted Microsoft that says that they have a product key because it was purchased at Apple, so I contacted Apple and they said I need to contact Microsoft. How can I get Office working on the new iMac 2016? Are my only purchase the software again to spare, or the 360 desktop product solutions? Thank you.

  What follows from Microsoft support gives the options: https://support.microsoft.com/en-us/kb/2279109

• Is there a way I can share files between users on the same Mac without an internet connection?

  Hello world!

  Quick question here: is there a way I can share files between users on the same Mac without an internet connection?

  I have two users say that A and B. If I go the long way via the 'Go' menu > 'Computer', I ended up being told to contact my computer or the network administrator for assistance. Both users are admin one and file sharing is allowed in system preferences... I have to admit that I use 10.9.5 because my MacBook Pro would not work with OS Xs national parks.

  Any ideas would be cool because I'm sure that it used to work fine with "Snow Leopard" without being connected to the internet - or should I just send an email to myself and recover the files on the other user :-) to recover my USB is

  Choose go to folder from the Finder Go menu, provide/Users/Shared/as the path and place the files.

  (142147)

• Microsoft Office 2007 student does not completely load

  I tried to get my Office 2007 student 60-day trail to load but it get back to me with the message:
  Microsoft Office Student 2007 is not completely load.

  Please can someone tell me what to do thanks

  Hello!

  Here is a user to user of Toshiba forum and I think that it is a problem of Microsoft. Then I would contact Microsoft technical support.
  There may be something wrong with the website or something.

  Good bye