Connect to different networks (with or without proxy)

Similar Questions

• C168i: unlocked from at & t, but unable to connect to the network with the new SIM card

  I brought my c168i from the USA and I can't use it in my home country. I unlocked the phone to at & t, but it connects to the local network with the new SIM in there. It shows "not available" or "no service". What is going on??

  If you look at Australia GSM worldwide site, you will see which bands are available in your area. If the bands including the phone does not match the country you are located in the phone up with will not get service. Not all bands are available in all areas. In my view, that the phone only has GSM 850/1900 GPRS. This would mean that you get only service when GSM 850 is available that I don't see 1900 in Australia.

  Mark

  Support Forums Manager

• Connecting to a network with a security key that is too short for Vista

  I am trying to connect to the network to someone else. They enter my mac on their router address and gave me the key to their safety. However, when I try to connect, I get an error message saying that the security key must be 8 characters long. It's only 6. Is there a way to get around this? I don't want to / can not ask them to change its security key. Thank you.

  Hello

  No, I don't think there is a way around it.

  The owner is better to change the security of some sort causing 6 characters is probably not secure old WEP.

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• Unable to connect to the network with wireless connection on Windows 7.

  Original title: wireless Internet access

  I have good network and internet connectivity when I am connected via CAT - 5 to my router/modem.  However, when I access the wireless network, I always have good connectivity and access to internet but can't send or receive emails or access Web sites.  My client browser and internet messaging turns just until it times out.  Any ideas on the cause of this problem?

  Hi Michael,

  Thanks for posting on the Microsoft Community.

  I understand that you are unable to access e-mails or browse the site when you are connected using wireless network. I appreciate your time and patience to try to resolve the problem.

  1. What is the brand and model of the computer?
  2. What internet browser do you use?
  3. What mail client do you use?
  4. You receive an error message?

  This can occur due to missing updates, hardware or software problem on the computer.

  Initially, run the network troubleshooter from the link below, go to step 3.

  If the problem persists, then check out the link below which helps to fix the network connectivity issues. Wireless and wired network problems:

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab4&V2H=win7tab2&V3H=winvistatab1&v4h=winxptab1

  Hope this helps to solve the issue if the problem persists get back to us. We will be happy to help you.

• Connection to the network with Vista and Windows 7 computers

  A similar question was answered before, but it's XP computers I use Vista and Windows 7.

  I have a Windows 7 computer that is part of a home network and who also has a connected printer. I want to access the printer from a Vista computer that is also on the network. When I try to connect to the Windows 7 computer, I get the error "logon failure: the user has not granted the type of logon required on this computer."

  I've seen solutions have been when the system tries to access the printer was an XP system. Can someone help me with this problem?

  Thank you

  Jim

  Hi Jim,.

  ·         Is file sharing enabled?

  ·         You have disabled password protection?

  Try to check the Advanced sharing settings in the network and sharing Center. To do this, follow these steps.

  a. click Start, Control Panel and then click network and sharing Center.

  b. now, click change advanced settings for sharing.

  c. now make sure that file and printer sharing is activated on and protected by password sharing is turned off.

  You can also see the article for more information:

  Networking of computers running different versions of Windows

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

  Let us know the results.

• Interruption of the internet connection. Says "network can not find proxy address.

  

   
  

  0
  I am connected directly to internet DSL.  Did a system restore and lost my internet.  When I got to the computer it connected to the internet without problem.  Now nothing I try works.  I'm so frustrated... any ideas?  It finds no network and won't let me set up a broadband access.
  Help!      I tried to undo the restoration and, of course, windows cannot do due to a missing file

  Hi TopHatter,

  ·         You try to connect to a Wired or wireless network?
  ·         Recent changes to the computer before the show took place?

  First of all, make sure that explore the Internet proxy settings are not enabled. Follow the steps for this control.

  1. launch Internet Explorer.
  2. click on Tools , then click Internet Options.
  3. click on connections tab and click LAN settings.
  4. make sure that under Proxy Server , none of these options are checked. If something is activated, please the box.

  I suggest you to see if you are able to connect to internet wired to the router.

  If your computer has problems to connect to the Internet or to other computers on a network, try to use one of the network troubleshooting utilities to solve the problem.

  Open the convenience store network by double-clicking the network icon in the tray and then clicking on solving of problems

  Open the Internet connections convenience store by clicking on the Start, then Control Panel. In the search box, type Troubleshooting, and then click Troubleshooting. Under network and Internet, click connect to the Internet.

  Follow the steps from the link below that may help you solve the problem: Open convenience stores of networking: http://windows.microsoft.com/en-US/windows7/Open-networking-troubleshooters

  using the utility in Windows 7 Network Troubleshooter: http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  If you are unable to connect to your wireless network, and then follow the steps from the link below:

  How can I solve the problems of network card?: http://Windows.Microsoft.com/en-us/Windows7/how-do-I-fix-network-adapter-problems

  Thank you, and in what concerns:
  Swathi B - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Question about connecting to the network with a Terminal window

  Windows XP Pro, SP2, Fritz-card PCMCIA-

  Hello
  I am trying to create a connection from computer to computer by ISDN telephone line.
  I didn't install any software of specific composition, I only use the parameter of MS WinXP.
  Hardware works fine, I tested it successfully in composition in any other internet provider.

  Now I need to connect to a corporate network and they have a specific logon policy, where I need display Terminal window during the login procedure.
  So I turn on dial in properties connection on page "Security properties" dialogue box "show Terminal window.

  Problem during dial-in: the window does not occur.
  Second problem: if I go next time to this option, the input value is not saved.

  Any ideas?

  Kind regards
  Peter

  Please don't be crazy about me, but I don't see what's in your specific assignment for the Toshiba forum.

  You should speak with your company's network administrator and it should be able to help you. Otherwise, perhaps on some network specific forum you will have more chance to find what is the solution to your problem.

  If you have laptop Toshiba and everything you need for the connection works fine, I put t see to write here.

  In any case I wish good luck and hope that your network administrator will be able to help you.

• connection of forms 6i with mysql without involving the Oracle Server

  Hi all
  
  could someone tell me how to connect forms 6i to mysql without involving the Oracle Server?
  
  allow to say that I have installed Developer 2000 oracle and install mysql 5.0.
  
  I open the form builder, click on connect.
  What must I provide here.
  I tried to create the named MYSQL odbc driver and try to connect you as below
  
  Scott/Tiger@ODBC:MySQL
  
  but it gives the error ORA-03121-none connected driver interface, works do not run.
  
  What should do?

  What you ask is impossible. Oracle Forms is designed to interact specifically with the Oracle database. You can access the other tables in the database in an Oracle using Oracle heterogeneous Services database, but right ODBC is no longer supported.

  Craig...

• The Task Manager shows only the connection information of network with no menu - how to fix?

  I when I try to open the task manager of the only information that appears is the news of network connections.  There is no menu, and when I right click the only option is to close.

  Looks like you run the Task Manager using tiny/small footprint.

  If you double-click on the empty space around the border of the screen of the Task Manager, it will change from normal mode, and then you should see the tabs you are accustomed to seeing.

  You can read about it here:
  http://www.BROADBANDreports.com/FAQ/6905

• Cannot share the internet connection on the network with sprint card

  Hi all

  I'm stumped on this one. I'm working on my network of fathers, and he lives in a rural area. Unfourantely, there are not a lot of internet service here. It uses a printed card that connect locally to a windos vista home pc. From there on, the connection is shared and that the pc is connected to a linksys router. The router, then hosts a wireless network and hard line connections. About three weeks ago, the Internet stopped working except the computer, map of sprint is hung directly. I tried the following options below to solve the problem.

  1. I can plug the card sprint to any computer and it works.

  2. I replaced the network adapter on the host computer

  3. I have tried the card sprint on other computers and tried to share from there. Same result

  4. replace the router

  5 opportunity anotehr card Sprint which has been known to work

  6. replace the network cable between pc and router

  7. I tried removing the router from the equation and ran a network of host pc card form for directly to another computer

  8. the host and also renovated of other computers reformated

  9. do you have an ipconfig/release and renew

  10 tried sharing all NICs on the host PC

  When sharing the connection, I can see all the computers on the network. They arise, there is simply not an internet connection.

  The only mistake that I seem to get is not able to find the DNS. I put everything on dhcp.

  Any ideas that anyone can come would be most appreciated. Thank you

  Hello

  Step 01:

  I suggest you follow the same steps as expected here to set up the ICS (Internet Connection Sharing) host computer:
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-shared-Internet-connection-using-ICS-Internet-connection-sharing

  Step 02:

  I also suggest you to follow the link and check.

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-Internet-settings-for-ICS-Internet-connection-sharing

  For more information, please follow the link.

  http://Windows.Microsoft.com/en-us/Windows-Vista/using-ICS-Internet-connection-sharing

• Original title: the connection card wireless network with windows 7 problem

  I have a dv6 Notebook PC HP clubhouse, 64-bit Windows 7 Home Premium, I bought end July2010. H-he detects the wireless network but will not connect. just if I'm until modem.but colse it smt connect to the deffernt wireless network. What is happening and where do I go to fix this problem.

  Hello

  1 have had any changes made on the computer before the show?

  2. do you get an error message when you try to connect to the wireless network connection?

  Method 1:

  First of all, I suggest for the link and try to run the troubleshooter and check if it helps.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  I suggest you to refer to the article and see if it helps:

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-fix-network-adapter-problems

  Let us know if you need more assistance.

• Connect the 2 locations using RV016 router to fill 2 different networks.

  I have a RV016 connected to a comcast cable modem to slot 1 with IP 192.168.6.1

  I have a RV016 connected to a comcast cable modem at the 2 with 192.168.10.1 IP location

  I installed a VPN tunnel from gateway to gateway between 2 routers RV016.

  I have a LAN in slot 1 with the IP 192.168.1.1, which connects to the internet through an Adtran router with 4 lines of T1 servile.

  I have a LAN with IP 192.168.5.1 2 location that connects to the internet through an Adtran router with 3 T1 lines servile.

  I like a computer to location 2 to connect to the RV016 in the local Comcast modem to the Comcast modem at location 1 in the RV016 to slot 1 then go out to the local network at location 1 and communicate with an application server on LAN 1.

  Help, please.

  You can't do that with a RV016. The RV016 only supports layer 3 tunnel. This means that the two ends are different networks with different subnets. The traffic between them is not filled.

  If you want to really two bridged networks, i.e. join in a single LAN with a single IP subnet and a single broadcast domain you need a layer 2 tunnel, for example a tunnel L2TPv3. That works on layer 2, which is on the MAC addresses inside your networks. In this way, you can use the same IP subnet at both ends and on each side, it seems that the other side is connected to the same ethernet network.

  The RV016 does not support the tunneling of layer 2. You can create an IPSec tunnel, which is layer 3. If there is really a need for a tunnel layer 2, you get different devices. I recommend that you evaluate if a layer 2 connection is really necessary or not.

• Compaq presario c700-c795tu: unable to connect to the WiFi network with WPA2 encryption

  Hi team,

  I tried all the options in your post and I am still unable to connect to WiFi with WPA2-PSK encryption.

  I am currently using the adapter network driver atheros 5007 wireless.

  Some of the links in your message that resolved this issue earlier are currently unavailable.

  It would be great if you could help me to solve this issue.

  Concerning

  Roger

  Here is the patch for WPA2 for XP SP2...

  Install and reboot and then see if you're OK...

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=1974

  That's the only reason why I can think that now prevents you from being able to connect on a network with WPA2 Personal Security.

• TCP works on different networks

  Hello

  I have a problem with the TCP/IP communication.

  I write a program of communication TCP/IP (client-server) and it works fine when I tested it at the office (same network). But when I tested the program when server and client VI are connected to different network I have no communication.

  TCP/IP works when client.VI and server.VI are connected to different networks? If this isn't the case, someone suggested what protocol to use? Problem is this server VI must be in format exe but customer VI must be opened for editing.

  Thank you

  I think we need to clear up some things before going into the details "debug".

  First, when we talk about 'networks', I expect to see 'LAN' (local area network). A LAN often uses a dedicated identification "subnet", which is a combination of the IP address and the subnet mask. The subnet mask defines which part of the IP address refers to the identification of LAN, the "rest" of the intellectual property refers to the specific PC.

  An IP address (4) consists of four bytes, a given subnet mask instruction on how many bits and bytes are the ID 'LAN '. Subnet masks are often 255.255.255.0.

  When you say "work in the office (same network)", you want to: same subnet. Fix?

  (All IP addresses share the same values in the bytes of the subnet mask, but differ in the rest. Example: PC has 192.168.1.12, subnet 255.255.255.0. PC B 192.168.1.15, subnet 255.255.255.0).

  If the PC are NOT in the same subnet, it depends on the configuration of the network on how to proceed. If there is a "direct connection path" from A to B, just simply the target IP address (for example a 192.168.1.15, subnet 255.255.255.0, B 11.88.2.126, works of subnet 255.255.255.0 if 192.168.1 subnet has a direct connection to the 11.88.2 subnet).

  If there is NO direct link, you need to "port forwarding" on the hardware (router) inbetween. This can become quite difficult.

  So according to the purpose of this request, you may be better redefine architecture approach to loading dynamic components in your application.

  Norbert

• Unable to connect to the network when you use Internet Explorer, applications and games

  Hello!

  Problem in brief:

  Type of access network and sharing Center: Internet

  Ping works successfully for any Address.ex IP: 192.168.1.1 & google.com & any other website

  Local network access works well! I can access other computers files copy, paste, etc.

  PROBLEM: any application(games,TeamViewer,steam,viber,etc.) who want to get in touch with Internet: crash, no answer or does not even! web browsers does not open any Web site doesn't even open configuration page of the router (192.168.1.1)

  Tried:

  -Safe Mode

  -cleaning of all viruses (via ESET)

  -using the LAN cable

  -Captive connectivity via my phone (with or without USB cable)

  -disable antivirus

  -Start windows in diagnostic startup mode!

  -disable certain features or services

  -VMvare (she even is not run just give me an error and close)

  -using the windows key repair via the Installation of Win7 disc (he says run in windows and when I tried it gave an error that I don't remember what it was exactly, but I think it was said cannot get information on my disks!)

  n ' any browser (IE, Firefox, Google Chrome) with all the network settings

  AND without success! :(

  OK I think I wrote all the things on my laptop problem! (MSI GX780)

  It was the memory of what is my problem!

  _________________________________________________________________

  3 days ago, I went to college with my laptop out my usb flash uni compuer teacher and put in to my laptop computer and copied something and put new to United compuer. and when I have returned home and started my internet windows problem happened!

  all the computers in our University defected virus! but I've used these before computers (flash drive, etc.) but just a regular virus get own by my antivirus!

  so I tried a lot of things that I mentioned above! but without success :(

  all other devices in the House are OK! Desktop computer, Sony laptop, 2 Android phones

  for example when I run NFS mostwanted (2005), Counter Strike Condition zero & any other application that does not use Internet well run! but when run NFS Rivals, Mostwanted (new one) run but breaks down when they come into contact with internet (I play in solo mode)!

  Viber, gives me an error by not answering!

  VMware gives me error and close!

  Photoshop the same as VMware (but internal application error)!

  PLeaseeeeeeeeeee help someone!

  Original title: weird [SOLVED] Internet connectivity problem

  PROBLEM SOLVED! :)
  Solution:
  just type in the command prompt:
  netsh
  Winsock
  reset
  => and the magic happened and save my life

  Thanks to: http://www.tomshardware.com/answers/id-1735863/ping-browse.html#13989812