Sharing of TV recordings. At the end of our rope

Similar Questions

• It is added at the end of your program

  Hi all

  I want to add sound recordings at the end of my code. I added the beep, but I want a pre-recorded voice rather than just a pager. Any ideas how I can import the voice to my code?

  Thank you

  You have the play file.vi Sound that plays music files windows. It is available in Sound > output

• 6071E analog out and trigger to the end

  Hi, I'm here a trivial question: using PCI6071E, at the end of an analog output, is it possible for a trigger to output or update a number line?  for example, we hope when the last MONOSTABLE one sample is done, a digital HIGH is generated to power a switch.  I can think of have an analog and digital task task and the digital task at the end of an analog task in the program, but I don't know how long the delay would be. The best ways to do this? Thank you!

  Analog output: finished/large size but NOT via the trigger of FIFO, internal CLK software,

  on DAQmx / C + c++ / WinXP

  eLions,

  Analog task followed by a digital task that you thought would work, but it would be a delay of small software timed as you thought it would which can cause problems. If it's an analog output of finite size (say 1000 samples), what you can do is to synchronize the digital and analogue tasks together and have a digital low for 1000 samples, with the 1001eme exit on the digital line being the maximum. It would make no delay, as analog and digital line should be sharing the same frequency. C++ examples provided show how to sync analog analog output, which can be changed by the digital output.

• Cisco EX90: Unable to see the presentation of the end

  Hi all

  We have currently enrolled in CUCM EX90.

  Question:

  Scenario of

  1 when the EX90 will launch to share the presentation, from the other side, they were able to see the presentation that we shared.

  but in the far endpoint if they will start to share the presentation we can see their presentation and this is the only time wherever they are able to see our shared presentation.

  Conclusion: before we able to share the presentation at the other end, firstly they must commit to share their presentation we before they can see our presentation.

  Already checked the NaturalPresenter but according to audit it is already built in the EX90.

  My question is why the presentation works after end first start sharing their screen for us. But if we will undertake the first, they can't see our split screen.

  Receive your answer. Thank you!

  It will depend on the version of the software you; "re running on the EX90.

  Before TC7.0 EX90 Admin Guide says that, for a call SIP and the 5170-5177 5070-5077 UDP ports are used to connect BFCP (channel of submission).  From TC7.0 onwards, the BFCP port and the active control prefer to use dynamically ports the RTP port range.

  If a firewall blocks these ports, channel of submission will not be established and the presentation can be sent in the channel video main, which is probably why it seems to work when you call a bridge.

  Note: It is strongly recommended that you upgrade your version of software on your EX90 to TC7.3.6 to address many security vulnerabilities in earlier software releases.

  Wayne
  --
  Remember the frequency responses and mark your question as answered as appropriate.

• Question DMVPN with double IPS links at the end of the branch

  I have a Setup (see drawing) where I

  Double TIS links at the end of the branch, with the wireless and the other with 3 G.

  Wireless should always be the main path, when it works (it's a kind ship when it is in the port)

  If I use OSPF, then it works fine the failover, but as soon as I enable IPSEC on the tunnel, then there are switched only once and it will not be repeated at the elementary level once again, without having to restart the router, and then it works for a failover once again.

  I also use tracking, because there is no interface, it is down

  Are there someone there is a working configuration, where ec. in the network head (normal installation) there is double tis links on the same router or ofcause the same as I.

  I'm ready to use any kind of protocols so that it can work, so RIPv2 (preferred), EIGRP, OSPF, tracking, IP SLA

  Who is 80.198.195.138?

  The peer Hub address is 80.1.1.1 then you can ping this address when the main link is down?

  It also seems that you have IPSec tunnel 0 UP but no 0 and 1-tunnel at the same time tunnel. Make sure you have the word of shared key on the hub, router that you use the same source for the two IPSec tunnel IP address.

  This message means the IKE database between two routers is out of sync, but should recover on its own.

  HTH

  Laurent.

• Encoder Media ceases at the end of the (first CC 2014) video coding

  I've finished editing a video (a little less than 4 minutes). When I try to export to a file of windows (HD 1080 p) media it always stop coding at all about the 50% mark.

  • I tried to export to a shared network drive and the hard drive local, with the same results.
  • I updated: Mercury Playback Engine software only
  • I tried to export directly from first and Media Encoder.
  • I looked where it stops during the export of the encoder through the preview window. It seems to happen at the end of the video and stops right where I melted white and the music ends. The interesting part it the timer indicates 50% left to complete
  • He don't plant... it's just there with increasing timer and never continued
  • I do not plug-ins.
  • To the point where it stops, I have a 'Dip' transition to white on a music video and no audio transition applied to the soundtrack since it ends well with video.

  Please let me know if there is anything else I can / should I explain to get help. Thank you very much for your help.

  System details:

  Operating system: Windows 7 Professional 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.140303) - 2144

  Language: English (regional setting: English)

  Manufacturer: Hewlett-Packard

  System model: HP Z230 Tower workstation

  BIOS: Default system BIOS

  Processor: Intel Core i7-4790 CPU @ 3.60 GHz (8 CPUs), ~3.6GHz

  Memory: RAM 16384MB

  Available OS memory: 16070MB RAM

  Card name: Intel(r) HD Graphics 4600

  Manufacturer: Intel Corporation

  Chip type: Intel(r) HD Graphics Family

  DAC type: internal

  Display memory: 1 696 MB

  Dedicated memory: 64 MB

  Shared memory: 1632 MB

  Current mode: 1920 x 1080 (32 bit) (60 Hz)

  Peferling... I have a positive update! I went to the area that usually makes things die. I noticed that it was the end of queue where I inserted a sequence in another sequence. I also noticed I had three tracks in this article with graphics. So I copied all the tracks in the sequence inserted... then removed the inserted sequence and re-inserted tracks real. At this point I had more an inserted sequence. Then, I simplified the three titles of graphics into one. Again my transitions and final tweaking. I tried once more export as H.264 HD... and voila! It worked! Something must have been breaking.

  For now, I agree and have been able to export in other formats. I want to thank you very much for your comments. Best regards, Nelson

• Parameters in URL of the end BSO

  Hello:
  
  I have an end of OSB say URL
  
  https://xxx.XX.XX.XX:7002/sample/books
  
  who is exposed as a service proxy with ServiceType as "No matter what XML Service", and routes it to a business service that the Protocol is 'jms' ServiceType is also 'all Service of XML. "
  
  I've shared throughout the end of the proxy - URL of the point of another application. Now they have two types of books available in other applications, they want to send through the same as parameters in the URL endpoint even as
  
  Books/sample / https://xxx.xx.xx.XX:7002? Type = Fiction
  
  Books/sample / https://xxx.xx.xx.XX:7002? Type = WarBased
  
  Now my question is my service of OSB in pick-up the case above and according to the parameters that we will be able to send it to business as well as the parameters. To do that I have to maintain any scheme of Business Service?
  
  Kind regards
  RK

  RK,

  Use of the * $entrants / ctx:transport / ctx:request / http:query-string* the item to get all arguments in the URL.

  http://docs.Oracle.com/CD/E13159_01/OSB/docs10gr3/httppollertransport/transports.html#wp1083292.

  After that, you can have conditional routing to Route it specific BS BS Fiction or WarBased BS or you can try to use the Routing Table.

  To do that I have to maintain any scheme of Business Service?

  No, I think that if you just need to forward the request to JMS BS from other applications.
  But if you want to post the request that would send you to BS then use schema to validate your incoming request.

  Kind regards
  Afonso

• Green bar opposite the end to preventing CTI of the clip

  In first Pro CS5, that I installed it on one of our old machines, that I had happened something strange - at least I think it's strange:

  In the source monitor, I have a short green bar extending in front of the vertical reading head. This prevents me to play the end of the tale of clips. Unfortunately, some of my students do not include handles on their recordings and we have to get the video and clear audio at the end.

  Any ideas? Thank you!

  Yes, that is just show you the framework that you are.  ICT is always placed at the head of the frame, but you can see the full clip.

• Error message at the end of the installation of the Creative suite 5.5 Acrobat not installed

  Hello

  I have a problem when installing Adobe creative suite 5.5 in my system to windows 7. during installation, all right, but at the end of the installation, I got the below error message. and Adobe Acrobat X is not installed. When I try to install only the Acrobat A wrap creative suite serial number does not work (only for Acrobat, but if you use it for the whole creative suite works)

  Exit code: 7

  -------------------------------------- Summary --------------------------------------

  -1 fatal Error (s), 10 (s), 6 warnings

  WARNING: DW024: payload: Adobe Photoshop CS5.1 Core {08EF22BC-43B2-4B4E-BA12-52B18F418F38} requires a parent from the user interface with the following specification:

  Family: Photoshop

  ProductName: Adobe Photoshop CS5.1 Core_x64

  This parent relationship is not satisfied, because this charge is not present at this session.

  ERROR: DW025: the payload with AdobeCode: {857CC5F0-040E-1016-A173-D55ADD80C260} demanded dependence on:

  Family: InDesign

  ProductName: Adobe InDesign CS5.5 icon Manager x 64

  MinVersion: 0.0.0.0

  This dependency is not satisfied, because this charge useful is x 64 and is not supported on this computer.

  Removing this dependency of the list. Product may work correctly.

  WARNING: DW025: payload with AdobeCode: {857CC5F0-040E-1016-A173-D55ADD80C260} recommended dependence on:

  Family: Suite of Web Adobe CS5.5

  ProductName: Adobe Media Encoder CS5.5 X 64

  MinVersion: 0.0.0.0

  This dependency is not satisfied, because this charge useful is x 64 and is not supported on this computer.

  Remove this payload to the list of dependencies.

  WARNING: DW025: payload with AdobeCode: {D8CCCF4C-C227-427C-B4BE-736657D2AB7E} recommended dependence on:

  Family: Suite of Web Adobe CS5.5

  ProductName: Adobe Media Encoder CS5.5 X 64

  MinVersion: 0.0.0.0

  This dependency is not satisfied, because this charge useful is x 64 and is not supported on this computer.

  Remove this payload to the list of dependencies.

  ERROR: DW025: the payload with AdobeCode: {D97AF04B-B70A-4862-BC25-31E6D9C4A529} demanded dependence on:

  Family: CoreTech

  ProductName: Adobe Player for the x 64 coating 3.1

  MinVersion: 0.0.0.0

  This dependency is not satisfied, because this charge useful is x 64 and is not supported on this computer.

  Removing this dependency of the list. Product may work correctly.

  ERROR: DW025: the payload with AdobeCode: {D97AF04B-B70A-4862-BC25-31E6D9C4A529} demanded dependence on:

  Family: Shared Technology

  ProductName: Photoshop Camera Raw (64-bit)

  MinVersion: 0.0.0.0

  This dependency is not satisfied, because this charge useful is x 64 and is not supported on this computer.

  Removing this dependency of the list. Product may work correctly.

  ERROR: DW025: the payload with AdobeCode: {D97AF04B-B70A-4862-BC25-31E6D9C4A529} demanded dependence on:

  Family: CoreTech

  ProductName: AdobeCMaps x 64 CS5

  MinVersion: 0.0.0.0

  This dependency is not satisfied, because this charge useful is x 64 and is not supported on this computer.

  Removing this dependency of the list. Product may work correctly.

  ERROR: DW025: the payload with AdobeCode: {D97AF04B-B70A-4862-BC25-31E6D9C4A529} demanded dependence on:

  Family: CoreTech

  ProductName: Adobe Linguistics CS5 x 64

  MinVersion: 0.0.0.0

  This dependency is not satisfied, because this charge useful is x 64 and is not supported on this computer.

  Removing this dependency of the list. Product may work correctly.

  ERROR: DW025: the payload with AdobeCode: {D97AF04B-B70A-4862-BC25-31E6D9C4A529} demanded dependence on:

  Family: CoreTech

  ProductName: AdobePDFL x 64 CS5

  MinVersion: 0.0.0.0

  This dependency is not satisfied, because this charge useful is x 64 and is not supported on this computer.

  Removing this dependency of the list. Product may work correctly.

  ERROR: DW025: the payload with AdobeCode: {D97AF04B-B70A-4862-BC25-31E6D9C4A529} demanded dependence on:

  Family: CoreTech

  ProductName: AdobeTypeSupport x 64 CS5

  MinVersion: 0.0.0.0

  This dependency is not satisfied, because this charge useful is x 64 and is not supported on this computer.

  Removing this dependency of the list. Product may work correctly.

  ERROR: DW025: the payload with AdobeCode: {D97AF04B-B70A-4862-BC25-31E6D9C4A529} demanded dependence on:

  Family: CoreTech

  ProductName: Adobe WinSoft language Plugin CS5 x 64

  MinVersion: 0.0.0.0

  This dependency is not satisfied, because this charge useful is x 64 and is not supported on this computer.

  Removing this dependency of the list. Product may work correctly.

  WARNING: DW025: payload with AdobeCode: {D97AF04B-B70A-4862-BC25-31E6D9C4A529} recommended dependence on:

  Family: Suite of Web Adobe CS5.5

  ProductName: Adobe Media Encoder CS5.5 X 64

  MinVersion: 0.0.0.0

  This dependency is not satisfied, because this charge useful is x 64 and is not supported on this computer.

  Remove this payload to the list of dependencies.

  WARNING: DW066: OS requirements not met for {AC76BA86-1033-F400-7760-000000000005}

  WARNING: DW065: display the requirements not met for {60E59A6C-7399-495A-B85C-C829F4E59602}

  ERROR: DW020: found payload conflicts and mistakes:

  ERROR: DW020:-Adobe Flash CS5.5 depends on Adobe Flash Player 10 ActiveX must be installed.

  FATAL: DW020: conflicts were found in the selected payloads. Stop the installation.

  -------------------------------------------------------------------------------------

  Thank you

  Concerning

  Rida

  Refer to this:

  Errors ' Exit Code: 6, "" Exit Code: 7 ".

  Mylenium

• Is it guaranteed that a started thread will run until the end?

  Hi guys,.
  
  Someone wrote this on the threads:
  
  «Thread depends on the VM Scheduler and * it has NOT guaranteed a Thread run and selection by the Scheduler of VM despite you started the thread with a call to x.start () *.» "When you started the Thread it is only in a RUNNABLE STATE, re-read Chapter until you have understood" (Chapter 9 wire - Sun Certified program for Java 6 - Study Guide (310-065) - Kathy Sierra and Bert Bates - 2008)
  
  It's the Red sentence that make me really confused. In fact, I read this chapter several times, and I couldn't read that kind of statement in the chapter. What I have read is the following,
  
  Excerpt from the book (pp. 713-714)
  
  class NameRunnable implements Runnable {}
  public void run() {}
  for (int x = 1; x < = 3; x ++) {}
  System.out.println ("Run by")
  + Thread.currentThread () .getName)
  + ", x is"+ x); ".
  }
  }
  }
  
  public class ManyNames {}
  Public Shared Sub main (String [] args) {}
  Make an executable
  NameRunnable nr = new NameRunnable();
  A thread = new Thread (nr);
  Put on two = new Thread (nr);
  Thread three = new Thread (nr);
  one.setName("Fred");
  two.setName("Lucy");
  three.setName("Ricky");
  One.Start ();
  Two.Start ();
  Three.Start ();
  }
  }
  
  
  And the authors wrote this:
  
  Nothing is guaranteed in the previous code EXCEPT this:
  
  Each thread will start and each thread runs until the end.
  
  I try to explain to me, what I heard in the sentence in the book: "each thread will begin, and each thread runs until the end."
  
  $java ManyNames
  
  After this call, the main method of the class that manynames is called and the JVM running the code in this sequential method. When the main thread calls one.start (), the thread (thread Java) is mapped to an operating system thread (well well, in most implementations), but the important thing, the (Java thread) thread gets the RUNNABLE state pending to have a chance to get the State RUNNING one start execution of the its Runnable target run() method. So, at this point, we have two sons who may be selected to get the State of EXECUTION, the main thread and the thread one. Assume the main thread runs a hand through method. In this case, calls two.start () and three.start () are called. Main thread ends, and we have three threads alive, waiting for his ride to get the condition of OPERATION. For me to run in full means that all these discussions will be printed three times the sentence:
  
  "Managed by [NAME of THREAD: Fred or Lucy and Ricky], x is [1, 2, or 3].
  
  And each of them will end their run() (AS THE CODE MEANS) method. A possible output might be:
  Directed by Fred, x is 1
  Managed by Lucy, x is 1
  Managed by Lucy, x is 2
  Directed by Fred, x is 2
  Managed by Lucy, x is 3
  Directed by Fred, x is 3
  Managed by Ricky, x is 1
  Is managed by Ricky, x 2
  Managed by Ricky, x is 3
  
  But this order is not guaranteed.
  
  So, my question is simple, if we execute THE CODE (without everything changed) in ANY Machine Java virtual, it is GUARANTEED all started threads (main thread, Fred, Lucy and Ricky) will run until the end OR I have to believe what the guy wrote to me: it has NOT guaranteed a Thread run and selection by the Scheduler of VM despite you started the thread with a call to x.start ()?
  
  If what this guy says is correct, it should be to create and start a thread if it is not guaranteed that this thread will run until the end? Well, if it is a nice Visual clock on the screen it does not matter if we can see the clock or not, but what would you say if it is a wire that control the process of emergency in a factory, just an example.
  
  
  Thanks for your opinions,
  
  Alvaro
  
  Published by: Alvaro on July 28, 2011 17:15

  While there is no guarantee, the goal of starting discussions is that it will run until the end, and this is what happens under normal conditions.

• Newline being added at the end of URL hyperlinks

  I have a list of hundreds of URLS that are generated on an Excel worksheet that my colleague has added as hyperlinks to the picture frames in InDesign CS5.

  Add them as a URL link, he leaves the box "shared the destination of the hyperlink" checked so they were automatically converted to links of Destination shared on creation.

  I exported the INDD file to SWF format, all hyperlinks worked fine once that I've tested on a live server. However, when I exported the same INDD document in a document of (Interactive) PDF the same links did not work. The links show as it should in the PDF, ending with "pagename.aspx", but once you open the link in any browser there a hexadecimal cart on the end, "pagename.aspx%0D", that invalidates the URL.

  I tried all combinations of the creation of a hypertext link in InDesign; URL, shared, shared the box checked and unchecked, there is no dofference, 0% D was always on the end.

  I went on the symbols of Excel controls, nothing appeared, although I am a novice in Excel.

  I copied and pasted the same URL of Excel directly in a block of text into InDesign, it showed no carriage don't return symbol, and nothing shows anywhere else there is nothing hiding on the end of the URL.

  Today I edited a hyperlink on the same document, and re-exported to SWF, now I'm having the same problem with this particular link changed, regardless of what type of hyperlink I have change, now both Flash and Acrobat!

  Like most of the bugs I encountered, InDesign turns out to be the culprit, and the new features related web never seem to work the way they claim.

  I have found no such evidence on Google to someone else having a similar problem.

  Please help, thanks.

  I don't think that's the problem. I believe that shared destination that url always appear as hyperlinkURLDestinations.

  Try adding

  $.writeln(hls[i].destinationURL);
  

  before the function if() to print a line to the console for each URL ESTK, he meets.

  Oh, wait! Ha ha ha. After a further inspection, I see the problem... Please delete the exclamation mark (!) at the beginning of the if() function...

  The script that I modified tested for the ABSENCE of something before you do the replacement. But it's the opposite here, where you test the presence. "" "!" means "not." sigh...

  Sorry about Feng...

• Audio synchronization is disabled at the end of the records

  Hello

  I have a few tapes. Format AVI which were made earlier this year. The files were made using a black magic capture card and their recording Media Express program.  These recordings are about 2-3 hours long.

  I discovered that although the audio is synchronized at the beginning of the records, it is disabled by as much as 1 to 2 seconds before the end of the recording.

  Is there a way to first Elements 8 to correct the audio so that it is correctly synchronized during the registration?

  Thank you!

  Welcome to the forum.

  Unfortunately, you have filed for the subforum tips & tricks, which is a repository for tips on how to do things in the meadow. Our MOD, Steve, will probably pass this point on the main forum, so that several users can see and respond.

  Now, in regards to the AVI, which term is simply a wrapper, and it's what's inside that really matters. This ARTICLE will give you general information.

  It is likely that the CODEC of the BM is originally the derivative of synchronization. Dynamic correction of OOS is a little more difficult, that static OOS, but this ARTICLE will return you though the process.

  Good luck

  Hunt

• Should I buy now FCPX if a new version may be on its way at the end of October?

  I'm considering the purchase of FCPX at level of iMovie, because I must be able to work with multiple cameras and work with more than one PIP at a time.  Also I'm not a power user in anyway...

  In any case looking around, I see rumors of a possible major new version announced in late October.  I don't know about how the purchase and update of FCPX works so if I had to buy now, I would be able to upgrade to the new version (assuming that it is a major release) or would I have to pay all over again?  Could I be better waiting four weeks until the end of the month?

  What do you think?

  I would like to know.  I have to pay for future improvements.  At the end of the 1990s, Adobe Photoshop cost 1299.  You would have to pay to go to Photoshop 5.0 to 6.0, etc.  It was sold to the library at my college, and students got a small discount.  My first digital camera was a pd150.  From interested parties.

• I want to add a document to the end of another document in pages. I've seen a solution here by copy

  I can't add to the documents together in pages. I want to add a list of references on the end of an assignment, but they are on 2 separate documents, thank you.

  Open the first document Pages. Add a new section. Copy / paste your list of second document reference material in the first page of the News Section. Record.

• I downloaded the latest version of iTunes on my book Mac pro at the end of 2013.  Where is siri?

  I downloaded the latest version of iTunes on my book Mac pro at the end of 2013.  Where is siri?

  "the ability to play music using Siri when macOS Sierra launches this month ncluding"