Sharpen then return lines causing

Similar Questions

• Can I access a label inside a MC and then return to the main time line

  Here is my current set up.

  I have a section marked on the main timeline that has the icons of 12 different videos. Each icon acts as a button and brings a user to a section marked with a FLV Playback component work video to play the corresponding video. These marked sections are located on the main of the time.

  This methog is my very long time mainline. Is there a way to do an additional MC which will hold all the buttons of the video and then have this MC separated in marked sections.

  In other words can I access a label inside a MC and then return to the main time line?

  My current code to access the label placed on the main timeline is:

  HowTo_maininfo_mc.theArrangement_btn.addEventListener (MouseEvent.CLICK, theArrangement_btn_amimated_btnDown);

  function theArrangement_btn_amimated_btnDown(event:MouseEvent):void {}

  gotoAndPlay ("theArrangement");

  }

  What it would be like if my "theArrangement" label would be located inside a MC?

  Is there a specific code of if I want to have a close button located on the label inside a MC and he needs to get on a label located on the main timeline?

  You should have an image with an flvplayback component and having each button assign the variable value from a source that is used by your component:

  var sourceVar:String;

  function theArrangement_btn_amimated_btnDown(event:MouseEvent):void {}

  sourceVar = "arrangement.flv";  for example

  gotoAndPlay ("flv_pb");

  }

  ///

  and as part of the "flv_pb", use:

  yourflv_pb.source = sourceVar;  where yourflv_pb is your component instance name.

• A box of error with Visual C ++ Runtime error on the top and the assertion then error line 267 program appears

  Original title:

  How can I get rid of this 'box', he said Visual C ++ Runtime error on the top and the assertion then error line program 267: file_common_npngate blah blah

  Expression pPlugin Shim? I uninstalled Reg Pro and the other antivirus that both are installed on my computer. Someone at - it get this message before? What should I do? I am still able to run normal programs, but this error continues to repeat itself, I continue to close, and then I get again.

  Ali

  Hello

  1. when exactly you get this error message?

  2. what browser do you use?

  3. If Internet Explorer, what version of Internet Explorer is installed on the computer?

  4. are you aware of any changes made to the computer, before the show?

  A runtime error is a software or hardware problem that prevents a program to function properly. Runtime errors could cause you to lose information in the file that you are using, causing errors in the file (corrupt the file) so that you cannot work with it, or prevent you from using a feature.

  If it does not solve the problem, try method and forward them to the following, following.

  Method 1:

  Step 1: Safe Mode

  Start your computer in safe mode and check the number.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: Clean boot

  If you are not facing the problem in safe mode, and then put your computer in a clean boot and search for the question.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: once you have determined the problem by using a clean boot procedure, follow step 7 in the article to restore your computer to normal startup.

  Method 2:

  If you get this error in Internet Explorer, try the steps in troubleshooting mentioned in the following link.

  Correct errors in Internet Explorer

  http://support.Microsoft.com/kb/822521

  Note: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  
  Method 3:

  Download and install the latest versions of Microsoft Visual C++ and are looking for the issue.

  For the 32-bit version of Windows Vista:

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=5555

  For the 64 bit version of Windows Vista:

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=14632

  I hope this helps.

• In Hotmail by clicking on the spam folder it opens a second then returns to the Inbox

  Hello

  Today, I entered my Hotmail email account to check my mails. I started to check the junk e-mail folder.  I saw see them all here, which was and then returned to my Inbox, where I removed several old emails.

  Later, I went back the junk e-mail folder to take care of the content. Some I've specified not junk and responded to them. They have been moved automatically into my Inbox.

  Then began the 'fun ':

  Given when I tried to return the junk e-mail folder, when I clicked on the folder name iin the list of folders, the content will appear for a second or two at a time, then he would return back automatically in my Inbox. This happened several times. I tried first to open projects and sent files (those open ok) but every time I tried to open the junk e-mail folder, the content will appear for a second or two, then it would automatically back to the previous folder...

  I tried various combinations of files and also opening & closing messages, but most importantly I got this phenomemon content of junk e-mail posted for a second or two, so he could go back. Once or twice he remained in the junk e-mail folder, but I could not o identify the sequence of actions that resulted in the file remains open.

  My PC is under Windows XP Home/SP3 and I use the Internet Explorer 8 browser.

  It is a new phenomenon. I used this setup for a long time (except a month ago I added the DRAM - I have now 2 GB instead of 1 GB).

  Any suggestions?

  HI hsb3852,

  Thanks for posting your question in the Microsoft answers Forum. For any question on Hotmail, please visit the following link:

  http://windowslivehelp.com/forums.aspx?ProductID=1

• Under XP, when I try to install the program screen flash BACK and trying to change back, but then return to the windows form.

  When I run the Setup in the program screen flash backs and trying to change back, but then return to the windows form.

  * original title - back program will not be run. *

  How old is this program and what is his name?  If you give us the name of the program someone read here who have experience with the peculiarities of the program might be able to provide more help.

  Open a command prompt, and then try running Setup from the command prompt.  To start a command prompt, type CMD in the box run from the start menu and press or click OK .  At the command prompt, you can use the CD command to navigate to the CD, or you can run the Setup program by using the full path to the Setup program, for example:

  x:\Install.exe

  where x is the CD drive letter.

  John

• Cannot install windows update, error: updates have not been configured correctly. The system then returns

  Original title: Windows updates fail to configure.

  I wonder to install Windows updates. I do and I am told they have installed.  When I have to restart my computer, I get a message that the updates have not been configured correctly. The system then returns. Next time I turn on the computer I get a message saying that updates have not been successful.  This has happened for months. I think that my computer is very slow because of it. I also think that my computer is a little short on memory. It is an Inspiron 530 with 1 GB memory

  Hello

  I suggest you try the steps from the link below and check if it helps.

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates: http://support.microsoft.com/kb/949358

  I hope this information is useful.

• try to install sp1 of Vista he gets at the end of step 3, then returns to the original OS

  original title: Vista SP1
  Whenever I try to install sp1 of Vista it happens at the end of stagen 3 then returns to the original OS

  Software probably prevents writing to the registry.  Try to install in clean boot mode.

  http://support.Microsoft.com/kb/331796

• Tabular returns lines based on the selection list

  Howdy-

  An element of the selection list is used to select a job title.

  The tabular presentation returns lines of documents to be considered annually by the title of the post.

  A single column in a tabular form (the number of the document) is defined as a link so that the user can open and read the document.

  It works beautifully.

  But...

  Some job titles return a row of five documents, still others return more than a hundred, so when paging is used to move to the next set of lines in tabular form, updates the selection list and the selection is lost.  I have the Page Action selection list element when the modified value to Redirect and set the value, but the Type of Source is static that may be my problem.

  How can I use pagination while maintaining the value of the selection list?

  Thanks in advance.

  Alexandra

  Request Express 4.2.2.00.11 (by the way, I don't have our network administrator do a update to this version?)

  the value of the default selection on a hidden item list. When you select from the drop-down list, set the item also hid from the selected item.

• Thunderbird stops for one minute with the symbol of the waiting and then returns an error message on a script does not? CAUSED: By McAfee

  Thunderbird stops especially when you write a message, displays the circle waiting and finally back with a message on a script does not properly. The choices are stop script or continue, the choice is obviously stop. It's embarrassing, I have set up with the same problem with XP on Thunrderbird and on Firefox and supposed to with Win 8.1 this would go, I was wrong. It is a standard installation of you bird, have not had the problem again with F'fox.

  Thanks for the info, I intend to replace McAfee but looks, as norton may have the same problem or a similar problem and is probably what is causing issues with XP. E machine XP will disappear but will have to solve on the new machine.
  Once again thanks for the info.

• Laptop starts then returns to the screen which asks how to start then with every choice is up to the blue screen then shutsdown...

  Hello
  When I start my laptop (HP Pavilion dv6000) happens inot a windo who said: "We apologize for the ivconvenience, but windows did not start successfully. A recent hardware or software change might have caused this.... "After I select Safe mode, safe mode with network, safe mode with prompt command, last known good coonfiguration (your most recent settings that worked), and start windows normally it starts up to a blue screen that says"a problem has been detected and windows has shut down to prevent damage to your computer. "

  If this is the first time you've seen this erroe to stop screen, restart your computer. If this screen appears again, follow these steps:

  Disable or uninstall any anti-virus, backup utilities or disk defragmentation. Check the configuration of your hard drive and check the updated drivers. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.

  Technical information:

  "STOP: 0 X 00000024 (0 X 00190203, 0X86F67638, 0XC0000102, 0X00000000).

  Then my computer shuts down and restarts then displays this message then turns off ect.
  What should I do to fix this?

  Stop code 0 x 00000024 is caused by a problem reported by the pilot responsible for reading and writing to NTFS volumes (or partitions) on the hard drive of the pc - NTFS is the default file system used by XP.

  It can be caused by a number of things, including errors on your hard disk or a defective HD controller.

  Is your PC still under warranty? -If so, return to the supplier to fix.

  If it is out of warranty, you have a Windows CD to boot from? If so, configure your BIOS and choose everything first from your CD player rather than your hard drive, put in the Windows CD & re - start. When the installation of Windows has loaded its drivers, press R to start the Windows Recovery Console. The WRC will identify your installations of Windows, and you ask you want to connect (and repair) - If you have only one installation, this is the one you choose.

  At the command prompt, type chkdsk and, hopefully, chkdsk /r will fix your HD (note that chkdsk /f does not run under the WRC)

  If the problem persists or chkdsk does not work, the problem might be with your HD controller - which is integrated into the motherboard of your laptop.

• Application of CUCM AXL returned lines

  Hello

  I currently have a SQL command running in a Server Microsoft SSIS command line, I would like to integrate SSIS to use AXL, but it fails with an error of:

  ---------------------
  ERROR: Query too large. Total lines corresponding: 89736. Extraction of suggestive line:
  less than 49345
  ---------------------

  Is there a way to increase the lines max and if so what risks are there environment? We don't have any adverse effect to use the SQL query from the command line.

  AO

  Hello

  This is a design limitation of AXL - return dataset must be less then a certain size (8 MB I think) - when you receive this size limit suggested, you can rerun the query with a query such as:

  Select the first 49345 * xxxx

  to get the first rows

  Then

  Select ignore 49345 49345 first * xxx

  For the second set, etc...

  Aaron

• Wrong number of returned lines 12 c

  Hi all

  We tested the upgrade from 11.2.0.3 to 12.1.0.2.5 (Oct 2015 psu) and ran into what I think it's a bug.

  12 c

  Select count (*) in the view_a;

  rows returned 4056

  Select col_a, col_b... from view_a;

  rows returned 3879

  I then tried to interview the base tables of the view with the same number of line problems.

  We tried to update its stats, put in optimizer_features_enable = '11.2.0.3', empty the memory cache, configuration statistics_level = ALL with no luck.

  Any suggestions or insights that could help?

  Thank you

  -RR

  That said the execution plan? Could someone else be the modification of the data? Could it be related to https://jonathanlewis.wordpress.com/2015/11/09/wrong-results/ ?

• Web Services - getBPList() - how NOT to return line items?

  Hello

  For the web service call getBPList results including all elements of line with all the fields.  We have included a list of fields and who works for the top section, but all the line items with all line item fields are also returned.

  Here are the web service call:

  " < soapenv:encodingStyle gen: getBPList = ' http://schemas.xmlsoap.org/SOAP/encoding/ ">

  < short name > * < / shortname >

  < authcode > * < / authcode >

  < projectNumber > < / projectNumber >

  Sellers of < BPName > < / BPName >

  < NomsChamps >

  record_no < fieldname > < / fieldname >

  title < fieldname > < / fieldname >

  uveVendorIDTB16 < fieldname > < / fieldname >

  uveVendorNameTB50 < fieldname > < / fieldname >

  uuu_contact_company < fieldname > < / fieldname >

  < fieldname > status < / fieldname >

  < / fieldnames >

  < filterCondition > status = Active < / filterCondition >

  < filtervalues / >

  < / gen: getBPList >

  Thank you

  Rudy

  Usually the easiest way to get data out of unifier is to create a UDR who has the specific data that you want and then you can use the web service getUDRData. Having a UDR allows to choose the fields specific (or just the top shape in your case), and to put in place filters you can (registration State,...).

• Subselect query returns "invalid identifier", but the nested query return lines

  I don't think it's a general SQL question.

  Select * from persons where person_id in)

  Select person_id with people whose name = 'Obama' - subquery

  ) and age > 18;

  When I run the subquery, I get:

  ORA-00904: "PERSON_ID": invalid identifier

  00904, 00000 - '% s: invalid identifier '.

  * Cause:

  * Action:

  Error on line: column 5: 8

  This is because the table people do not have the person_id field.

  But when I run the nested together query it returns all the lines in people with the AGE greater than 18.

  How is he succeeds when the subquery is obviously wrong?

  363f652b-263D-4418-933F-74a1d0a41b4c wrote:

  I don't think it's a general SQL question.

  Select * from persons where person_id in)

  Select person_id with people whose name = 'Obama' - subquery

  ) and age > 18;

  When I run the subquery, I get:

  ORA-00904: "PERSON_ID": invalid identifier

  00904, 00000 - '% s: invalid identifier '.

  * Cause:

  * Action:

  Error on line: column 5: 8

  This is because the table people do not have the person_id field.

  But when I run the nested together query it returns all the lines in people with the AGE greater than 18.

  How is he succeeds when the subquery is obviously wrong?

  Yes - this is a general SQL question and ask often enough.

  Correlated subqueries depend on the inner query, be able to see and access to the columns of the outer query. Normally see you referenced in the WHERE clause of the subquery and not in the SELECT clause, but the reference is valid in both places. This works because the columns of the tables in the main query are accessible in the subquery. "Person_id" is probably a column in the table 'people '.

  Which can be a cause of problems 'odd' when the column (in your case "person_id") is more of a table.

  Use an alias in the subquery in the subquery and you will find that it will not succeed.

  See these two articles AskTom where he addresses this specific issue

  http://asktom.Oracle.com/pls/Apex/f?p=100:11:0:P11_QUESTION_ID:3317493900346468494

  http://asktom.Oracle.com/pls/Apex/f?p=100:11:0:P11_QUESTION_ID:155200640564

• How to add a vacuum/return line!

  It seems so simple, and yet I don't find a way to do this in adobe acrobat!

  All I want to do is stick a blank line in the pdf file, a return. At present, the text reads like this?

  'jskdbvjkls\bvj\s '.

  skjfdbvjkashbvgkj

  askjfnvlkasjnvskjdn ".

  akfgnvlkasfdnvgkangfdhnsdfgnsfgmnsfmjndfhmjdgfhmjgfhm

  I would like that it reads like this:

  'jskdbvjkls\bvj\s '.

  skjfdbvjkashbvgkj

  askjfnvlkasjnvskjdn ".

  akfgnvlkasfdnvgkangfhmxfhgmnxfhmxgfhmgfxhmghmghm

  The small text is a poem (in the middle of some prose) and I would like that there is a space between the end of the poem and the beginning of the explanation. However, each of them seems to be inside different boxes (?) and if I press return to create an empty line, the last line of the poem overlaps the first line of the prose. I have had trouble with this for centuries, but cannot find a way to do it. Can someone put me against this incredibly annoying frustration?

  This type of installation should not be run in the PDF file.  You must change the

  original file and then create a new PDF.

  If you can't do this then either export it or try to move all text

  'boxes' to see you. There's no other way to do it.