Sheet excellent 'text data' missing in imported cells of a link.

Similar Questions

• I am new to Adobe, I created an Excel file that I convert the file to PDF, but the converted PDF file shows all the data, missing on the right side of the page

  I am new to Adobe, I created an Excel file that I convert the file to PDF, but the converted PDF file shows all the data, missing on the right side of the page

  Hi Tony,.

  In Excel, click on the Acrobat toolbar, and then click Preferences.

  

  Now select the option 'Fit the worksheet to a single page' and click ok

  

  Now, try to convert and check.

  Kind regards

  Rave

• Office toolkit 'excel get data' cannot read anything else of integers?

  I use LabVIEW 2009 and can not get LabVIEW to read non-entiers to a worksheet.  In the attached example, I put a breaktpoint after the new report vi, and and when it hits at this breakpoint I put a number as 1,234 in cell A1, and then continue execution.  But the 'data' outputs always return an integer value.  Even tried to change the format of the output of the data field.  I also tried to replace this with vi (LDM) Excel Get Data in the folder of the Toolbox, but got the same result.

  When I tried the same thing in LabVIEW 8.0 it worked.  No idea what I am doing wrong?  :-)

  Thank you

  -Bill

  Your meter is complete after you have changed the type of indicatpr, then you can get good results.

• Looking for model/data format to import survey data in the survey on demand in the apex 4.2.5

  Hello

  Looking for a model/data format to import survey data in the survey on demand in the apex 4.2.5.

  Thank you

  hayatms wrote:

  Where I can get this CSV format, so I have to add in the file accordingly. Thank you

  Click on the button create poll on the surveys page, then select the option to create a survey from a text file. An example of the required format is displayed. It is not a CSV format.

• Enter data into the empty cell inserts the invalid main character

  When I enter data in an empty cell, for example 1 in a column, and then click validation I get the error ORA-01722: invalid number. Although I do not see the character in front of the 1 I use RIGHT twice after reaching HOME in this cell to get the cursor to the right of the 1, if a character appeared in front of the 1. Hit the BACKSPACE deletes the invisible character, and now I can commit the data entered.
  
  The same thing seems to happen when you remove a date using backspace in a date column. The use of return back once led to an error "ORA-01858: a non-digit character was found here where was waiting for a digital". I have to use the BACKSPACE again to get the empty cell.
  And the same thing happens in a varchar column too, although sometimes when he gets that space seems to be inserted in front of the text I entered, but this space is visible only when the cursor is not in the cell.
  
  What causes this? Bug in the developer SQL, SQL Developer settings, settings of the keyboard, something else?
  
  (Oracle SQL developer 3.1.0.7 64bits)

  This is a bug and has been fixed for the next version.

  Brian Jeffries
  SQL development team

• How can I add text (date, description) to a photo in photo so that it will show on a copy of this picture?

  How can I add text (date, description, etc.) to a photo that she appears on a print that photo?

  Use an image editor as to put on the image preview or add as metadata and print a Board-contact with the metadata fields, you use shown

  LN

• SmartView - HypExecuteQuery with suppress ranks "No. Data / missing"

  Hello

  I'm running an MDX query by running the command "HypExecuteQuery" and I put the options remove lines "No Data / Missing". "."

  But each time the query is working properly but without deleting the missing data.

  Does anyone know of it suppress lack of lines is compatible with the hypExecuteQuery or "execute MDX"?

  SmartView 11.1.2.5.210

  Office 2010

  Thanks in advance for your answer

  Best regards

  Benjamin

  Hello

  The solution is the following:

  SELECT

  NOT EMPTY {[NOM_MEMBRE]} ON THE RANKS.

  NOT EMPTY {[NOM_MEMBRE]} ON COLUMNS

  OF .

• Question of Variable text "Date"?

  How can I get my release date and created to resemble my modification date? Here it is what it looks like now in the script.  I like just the look of the modified date string. If it is not possible to give them a look in this way, not much, I'm just curious.

  Date modified: June 7, 2016 15:52

  Release date: 06/06/16

  Creation date: 06/06/16

  The above script function is to get the format string of the Date object.

  Another simple solution is:

  In order to change the format of the variable Date of Modification, you can do so below:

  Using the Script

  var md = doc.textVariables.itemByName("Modification Date");
  md.variableOptions.format = "MMMM dd, yyyy hh:mm a";
  

  Through the user interface

  Go to the Type->-> set text Variables

  Select the change Date and click the button change.

  In the Date Format, enter the following:

  MMMM dd, yyyy hh: mm a

  Now, all instances of text Date of change variable will have the desired format.

• Data Pump Export/Import

  Hello Forum,

  I have a question regarding imports and exports of data pump, perhaps what I should already know.

  I need to empty a table that has about 200 million lines, that I need to get rid of about three quarters of data.

  My intention is to use the data pump to export the table and and indexes and constraints etc..

  The table has no relationship to any other table, it is composed of approximately 8 columns with constraints not null.

  My plan is

  1 truncate table

  2. disable or remove index

  3 leave the constraints in place?

  4. use data pump to import a lines to keep.

  My question

  will be my clues and imported too much constraints I want to import only a subset of my exported table?

  or

  If I dropped the table after truncation, I'll be able to import my table and indexes, even if I use the sub as part of my statement to import query functionality?

  My table using the query sub in data pump functionality must exist in the database before doing the import

  or handful of data pump import as usual IE will create table indices grants and statistics etc.?

  Thank you for your comments.

  Concerning

  Your approach is ineffective.

  What you need to do is to

  create the table in select foo * bar where the

  bar of truncate table;

  Insert / * + APPEND * / into select bar * foo.

  Rebuild the indexes on the table.

  Fact.

  This whole thing with expdp and impdp is only a waste of resources. My approach generates redo a minimum.

  ----------

  Sybrand Bakker

  Senior Oracle DBA

• Save in PDF of Photoshop Elemenst text is missing

  I'm saving a PSd to PDF format and text is missing in the player, but not in the original PSD, can anyone help?

  Hello

  I use photoshop elements 10.0 and windows 8

• Copy the text in Framemaker 10 table cells

  I want to copy the contents of multiple cells in a table to another table in the same document. How can I do this so that the text is copied in several cells again and not all content in a single cell?

  Margot

  Normally, make sure that you select the same array of cells in the source table and destination. If they don't match, geometrically, it may not work. This might happen, for example, if you have an overlap in one but not the other.

  If the arrays must have the same content for certain cells, in the future, consider having the cells from the clone table fill cells shared with cross-references in paragraph text, the main table. Then the main table changes, made the clone.

• Can't add placeholder text data merge for all blocks of text on the document

  I'm trying to put together a script that loops if all pages in an indesign file, search all text frames label caption1, caption2, caption3... (whenever you get to a new page, the number of text images label starts again from 1) and add a placeholder in the text data fusion: caption1, caption2, caption3... but this time, when you get to a new page the number continues to go... caption4, caption5 and so on.

  Page 1 - image text = caption1 = tag > data merge placeholder = < < caption1 > >

  Page 1 - image text = caption2 = tag > data merge placeholder = < < caption2 > >

  Page 1 - image text = caption3 = tag > data merge placeholder = < < caption3 > >

  page 2 - text = caption1 = image tag > data merge placeholder = < < caption4 > >

  page 2 - image text = caption2 = tag > data merge placeholder = < < caption5 > >

  Currently, the script is adding placeholder text merge data only for the two text frames first (out of 6) on a page (about 8 pages) and just the first image of text on the page two (out of 3)

  Any help will be greatly appreciated

  Here's the script:

  myDocument var = app.activeDocument;

  -SOURCE DATA CALLS FUSION

  main();

  main() {} function

  myDataSource var = File.openDialog ("Please select a datamerge source", "text files: * .txt");

  If (myDataSource! = null) {}

  myDocument.dataMergeProperties.selectDataSource (myDataSource);

  myDocument.dataMergeProperties.dataMergePreferences.recordsPerPage = RecordsPerPage.MULTIPLE_RECORD;

  }

  }

  -MERGE OF DATA FIELD

  function get_field (captionString, myDocument) {}

  fields var = myDocument.dataMergeProperties.dataMergeFields;

  for (var f = 0, l = fields.length; e < l; f ++) {}

  If (fields [f] .fieldName == captionString) {}

  Returns the fields [f];

  }

  }

  Alert ("error: did not find all the fields with the name" + field_name);

  }

  THE TEXT - ADD PLACEHOLDER DATA MERGE

  var countFrames = 1;

  for (i = 0; i < myDocument.pages.length; i ++) {/ / TOTAL NUMBER OF PAGES in the DOCUMENT}

  var capPerPage = 1;

  for (x = 0; x < myDocument.pages [i].textFrames.length; x ++) {//COUNT TEXT TOTAL IMAGES PER PAGE

  If (myDocument.pages [i] .textFrames [x] .label < 0) {}

  Alert ('can not find any image caption');

  } ElseIf (.textFrames [x] myDocument.pages [i] .label == 'caption' + capPerPage) {//IF IT IS A TEXT LABEL of IMAGE 'caption1' EXECUTE

  var captionString = "caption" + countFrames;

  var myTextFrame = myDocument.pages [i] .textFrames [x];

  var myDataMergeProperties = myDocument.dataMergeProperties;

  var myTextFrame.parentStory = monarticle;

  var myStoryOffset = myTextFrame.parentStory.insertionPoints [-1];

  var myNamePlaceHolder = myDocument.dataMergeTextPlaceholders.add (monarticle, myStoryOffset, get_field (captionString, myDocument)); ADD DATA FUSION TEXT HOLDER TO THE TEXT BLOCK

  countFrames ++; INCREASE THE NUMBER TO ADD DATA FUSION TEXT PLACEHOLDER FOR THE NEXT BLOCK OF TEXT

  capPerPage ++;

  }

  }

  }

  Hello

  To verify this change (replace for...) loop)

  var countFrames= 0, currLabel, capPerPage;
  
  for (i=0; i
  Notice countFrames starts at 0.
  Jarek
  		   

• The anchor paragraph or referenced text is missing

  I have a cross reference of document multi book I was working yesterday. I finished, recorded and saved a document with more than 2000 references crossed 60 documents to others.

  Today, when the reopening of this file to work on it, once again, some of the cross references appear as a red flag, saying "the anchor paragraph or referenced text is missing.

  When I double click on this reference, it shows me the configuration as previously, I had chosen for him, unchanged, and simply clicking on OK, the red flag has disappeared. I have changed nothing.

  Is there a way to get around this bug? Why do I get error indicators? I've not edited documents or changed anything, and yet, I get errors. I tried to "update all cross-references", but the indicators are still there.

  PS: I only use the anchor text and all cross-references are Page number (< pageNum / >).

  Thank you

  I'm afraid that I don't have advice to solve the 'problem '. I would say that, actually, if you are able to correct things using the procedure you described your lucky enough and should count your blessings. He's not unusaul to see reports of having to completely rebuild the cross references.

• Not packing on the text data review screen

  We are having a problem with no dressing on a screen, what happened on the screens of the interview and examination of the text data. Anyone had this problem before? And how to fix it?
  
  Thank you

  It will be a CSS problem that can be fixed by modifying main.vm.css. I don't know much about CSS, but when I had this problem with the review screen of data for a custom look that I was working, I was able to solve it by specifying a width of data-review-point which was smaller than the width of my graphic banner.

  In my example, my graphic banner was 960px width, and I added "width: 820px;" for review-data element in main.vm.css:

  .data-review-item {
      clear: both;
      width: 820px;
  }
  

  If you have someone CSS autour, get them to take a look at main.vm.css and I expect that they will be able to find the right fix for your particular situation.

  See you soon,.
  Jasmine

• I want to change the text in Captivate after import PowerPoint slides

  Hello

  Background: I import slides from a .pptx file. Once the slide is created inside Captivate, I want to change the text in the slide, but I can't. It became part of the background. So, I'm left with two options: 1) open the .pptx file, change the text, and then re-import the slide 2) manually create everything on the slide inside Captivate. This means a lot of work. I was hoping that Captivate 7 would solve this, but what seemed possible could address - high fidelity - is not available for mac. I'm sure that others have this problem too.

  Any help would be greatly appreciated.

  Hello

  Yes, I also never create presentations in PPT, but when my clients want an e-Learning course developed, they almost always send me a PPT - UGH. I'll just recreate each slide manually, because I have to have Captivate to all its other powerful tools. Thanks for your response!