Sheet of labels to fill

Similar Questions

• DeskJet 3520 prints paper usually ok but food takes hold of the sheets of labels Avery too early

  I have a Deskjet 3520 eAIO (wireless). Print labels Avery fine on other printers, but when I try to print them on the 3520, it seems to start to give the sheet of labels too early which means printing from more down the page (about 1/2 "") as it should. My 8 + yr old Canon print all types of avery labels with no problem, but he just finally bit the dust and I'm stuck.

  Hi panavygirl,

  I understand that you have a problem with printing labels Avery to your Deskjet 3520 printer. I'll try my best to help you solve this problem. Could you please tell me the model number of your printer and the operating system that you are running on your computer?

  HP Deskjet 3520 e-all-in-one and e-all-in-one printer, HP Deskjet Ink Advantage 3520 product specifications the table below shows the types of paper supported. This printer doesn't support label paper. That said when you choose the type of paper in the advance printing preferences menu, try to choose a paper to heavier weight for the printing of labels.

  The following table contains a list of sizes and types of paper supported.

• How do I set up and print labels Avery 8160, a sheet of labels with 30 different addresses?

  P. S.

  I have to merge and merge.

  Hi, Betty Jane,.

  You can contact help center of Avery for assistance for the question.

  Avery Help Center

  http://www.Avery.com/Avery/en_US/Help-Center

   

  Contact Avery

  http://www.Avery.com/Avery/en_US/Help-Center/contact-us

  I hope this helps.

• HP envy 5540: new hp envy 5540 jams sheet of avery type labels

  printer are not sent by the sheet of labels.  It blocks every time

  I use avery labels pre-printed with my return address of company on them.  2 of 3 down.  the labels are beginning to take off at the start of the page on the roll.  I'll try inkjet labels, although I really hate losing my company labels.   But thanks!

• shows how to add a different image for my Christmas labels to halfway down the sheet

  I try to print my labels for Christmas. I use avery labels size 2 "x 4" and all of a sudden to halfway through the print job, another image is printed on the background of the sheet of labels.

  I have had it before and may not know how to solve this problem. I double checked to make sure that this additional picture is not in the bed of the scanner. How can I get rid of this unwanted addition of my labels. I also tried a different word document that has a different picture of Christmas in all sections of 10 labels and sometimes it prints correctly and sometimes he adds this piture inside cookie half as well.

  Why is my printer done? I'm wasting ink and these labels as well.

  Thanks for any help you can give me. I am including an analysis of the sheet of labels so you can see what I mean.

  

  GuideMe

  Welcome to the Community Forum of HP.

  It could be your template file which is trashed, in other words, your label template document itself could be the problem.  You need to maybe start over, in other words, create a new document from model to model appropriate size label size label.

  The latest version of the Avery software, which let you can indeed use, moved in recent versions of Word.  Most of each model you can buy is installed within the software:

  Avery Wizard for Microsoft® Office

  The document that results from (.doc / .docx) can be made to be put a blank label, to which you could add - manually, your little Clip Art Santas.  In fact, if you have created a blank label template (by clicking through the process of 'create' model), you can add a Clip Art or a different photo on each label.

  If for some reason, the software will not be installed in your Version of Office Word, I believe you can use the software online and then print the labels on your printer.

  =========================================================================

  You could also simply any reboots:

  Router, computer, printer - just restart everything and see if the "strangeness" clears.  It is less likely to help, but it really depends on where the problem lies.  The question might be a little communication problem between the printer and the queue of work - the printer needs to process the job once it is taken from the queue; Maybe is not read the file correctly.

  Click on the Thumbs - Up Kudos to show that you appreciate the help.

  Click on accept as Solution when the answer provides a fix or a workaround!

  Although I strive to reflect best practices of HP, I do not work for HP.

• print labels easy without using Contacts

  Print the sheet of labels with different addresses with Word for Mac

  Is this a question?

• HP OfficeJet 3830: Printer HP Office Jet 3830 print labels? I can't find any option to change the thickness of the p.

  I need to print labels, sometimes one and sometimes pages of them.  When I put a sheet of labels in the Office Jet 3830 (in Word 16) the stuck sheet and would not go through the printer.  I can't find any way to adjust the thickness of the paper, not something thick like a page of blank labels.  If the printer has this function, how can I activate it?

  @vjdetling

  Printer:

  Range of all-in-one printers, HP OfficeJet 3830

  Full software features:

  File name: OJ3830_72.exe

  The specificationsindicate that the printer software can handle one type of media (paper type), titled "letter of card Index".

  Set your printing preferences / Print Preview to include

  • Media type 'Index Card letter'
  • Paper size: letter

  If includes it the list of media type, you can also try 'Matte of the Brochure' (wording varies)

  Help, suggestions and examples:

  Print Labels_Business-Cards_Cards

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  Fixed / responded? Click this post accept as Solution to help others find answers.

• Excel sheet can not be changed op OSX machines

  We received an Excel spreadsheet for tracking working hours. This Excel sheet works fine on all devices Microsoft with Office 2010-2016.

  When we try to use the same sheet Excel on a Mac Excel sheet can not be filled. Excel keeps saying that it is secured by a password? We tested it using Office for Mac 2011 and Office 365 2016 for the Mac. The file itself is reading/writetable.

  We asked the original sender if password protected Excel sheet, but he said that wasn't the case.

  Any ideas what could be the problem?

  -check if we can open the spreadsheet on different Windows platforms (Win 7, 8, 10) which works well

  -check if we can open the excel sheet on the different versions of Microsoft Office on Windows (office 2010-2013-2016) computers that works well

  -test on an iMac to edit the spreadsheet with the latest version of El capitan with Office 2011

  -test on a Mac mini to edit the sheet with the latest version of El capitan with Office 365 2016 Office for Mac version. Test not OK.

  -test on an iMac 27 "to edit the spreadsheet with the latest version of El capitan with Office 365 2016 Office for Mac version. Test not Ok

  Try asking at your office for issue of Mac at the office for Mac forums where the Office of the Mac gurus hang out.

  http://answers.Microsoft.com/en-us/Mac

• HP F2480 - aligning not printing labels

  Hello

  my HP F2480 is a great little Office all in one, but I've never been able to print labels in word (office 2007). There seems to be a problem with the alignment and the tags do not match the model selected in word. It is strange, however, that sometimes when I come to print on a normal A4 sheet it works fine. So I guess that it may be the different thickness of the sheet of labels.

  In any case if someone has had this problem or could help me that would be great. ~

  see you soon,

  Jeremy

  HI - you might try defining the type of automatic paper of plain paper in the printer driver, printing of labels.  If it works fine on plain paper, it might have to do with the automatic paper sensor.

  Hope that helps

• HP office jet pro 8600: part of the sticky label stuck in the printer. Paper jams.

  I ran a sheet of labels into the printer, part of the top of the sheet of labels is stuck inside the printer.  I ca not see the piece to remove it. I cleaned the rollers and it still jams.  How can I remove the piece of stickypaper? Or what I need to take the printer to get it fixed?

  I had a similar problem when someone brought me a printer with a label stuck on the inside.  I was able to get out the remains with the tweezers, a flashlight and a lot of patience...  With the Officejet 8600, I suggest to unplug the printer, removing the duplexer back and open the cartridge access door.  Do not tip the printer, if you did a lot of printing, there may be excess ink in the service area.

  The document here can help find areas to search for the remains of the label.

• OfficeJet pro 8610: print labels avery

  just started using my officejet pro 8610.  love it but I can't seem to aline sheets of labels when I print multiples.  When I print 3 copies it will make good on the 2 / 3. I have the tray loaded with about 50 sheets of paper of reg and then ask my sheets of labels above.  Have I not it overloaded or what.

  Hello pauldc,

  Welcome to the HP Forums.

  I see that you experience a problem when you attempt to print more than 3 pages of paper for labels at the same time.

  You said that you have plain paper in the status bar, as well as the label paper.  Please delete.  Use just the label paper when you print labels.  It would be the same scenario that you were printing photos and using photo paper.  Remove all of the regular paper.

  If you still have questions or if you have any other questions, feel free to write me again.

  See you soon,.

• Print Avery labels

  Is it possible to print on labels specific Avery?

  Hello

  The site of Avery will be models that be downloaded to allow printing on their labels. I have included a link here.

  As a word of caution when you print labels - "do not feed more than once a sheet of labels into the printer. Re-use of a sheet of labels can result in damage to the glue of the label printer. Labels must cover the whole sheet No exposed spaces. »

• HP Officejet Pro 8000 Wireless: Unable to print labels on my HP Officejet Pro 8000 Wireless color inkjet printer

  Hello Forum,

  I don't want to appear redundant, however, I always have the same problem, cannot print on different media (for example. Labels, Matt / glossy papers, etc.) other than plain white paper. As I said in my original post (below), I tried different settings, different programs, etc., without any result. The printer does that pass through without printing media, leaving the error / blinking yellow light.

  I believe that this printer is able to manage different media other than paper white just to 'stick '. Again, I ask your help to solve this problem. It is and has been, very frustrating trying to overcome this restriction of printing!

  Thank you all!

  (Original post)

  I can't get my HP Officejet Pro 8000 Wireless inkjet color printer to print CD / DVD labels. I have tried various printer / paper options but the printer just feeds the media (in this case 'Fellows' brand matte CD 2-top) then spits it right back with result error amber light flashing.

  Printing has a sensor that determines if the paper is loaded and feeding properly into the printer.  If you print on media that is colored or printed features we can confuse the sensor.

  One thing to try - cut a strip of the sticky part of a post-it note maybe 1 "wide by 1/4".  Attach it to the top left of the sheet of labels on the side to be printed, the long side on the short side of the paper.  This will then put face down into the printer, with the band on the upper right of the tray paper.  After printing, you can remove it and reuse it for the next page.

• HP 6700 Premium: problems printing labels

  To print labels on this printer, I place the label stock upside down on the top of the paper in the paper tray. Often (but not always) the printer pulls the label stock, then ejects and prints the labels you want on the sheet of ordinary paper that was immediately under the labels. This happens with a fresh sheet of labels and partially used sheets. The label stock varies depending on the brand and type of label, but all are 8.5 "of 11.0". I prepare labels using templates (usually Avery) in Word 2007 on a PC.

  @gntrainman

  If you have not done so recently, consider the full functionality for the printer software.

  Read the Description (on the Support Page for driver) and consider installing the update of the Firmware.

  Driver printer Support page:

  HP Officejet printer, 6700 Premium e-All-in-One - H711n

  Full software features:

  File name: OJ6700_1315 - 1.exe

• Specifying the Destination of Avery Label Printing

  I have a hp 6700 premium all-in-one printer. I have an iMac OSX 10.9 running. (although I don't think it matters, does?). I'm trying to print an address label with the standard of 3 rows of columns x 10 Avery label paper but I want to CLARIFY that column and row to print to (so I can reuse the labels not printed on the page and run the page through the printer again and again until they are used to the top). Years with another printer and the computer I could do but I can't understand how doing it now with the software and the hardware. What can I do if I select an address to print from my Contacts list is printing it in the default location: 1st column, 1st row. And that would mean that only two labels can be printed by every label page (when I want to print a label), wasting the other 28. So is there a way I can print just a single label and specify that it print to, say, column 2, line 7 (for example)? Thanks for any help!

  Hi MrBobboh,

  I did some specific research label printing and found some information for you. First, I would like to point out something important, I found. "Do not feed more than once a sheet of labels into the printer. Re-use of a sheet of labels can result in damage to the glue of the label printer. Labels must cover the whole sheet No exposed spaces. »

  Source: HP.com label printing

  When you print labels, you would typically use a model. You can go to the website of the brand of paper and download a template.

  Your question is "is there a way I can print just a single label and specify that it print to", the best way to respond, Yes with a model, but consider my first quote. By running the sheet of labels into the printer several times you take a risk, as this may damage the printer over time.

  Click here to open the site Web of Avery

  I hope this information is useful.