pouvez media center video strean of pbs

can I access pbs streaming video on media center to windows

Hi Jerry,

Thanks for posting this question in the Microsoft Community.

You can go through the article to learn more about streaming videos.

Here is another article on the fun online, you may encounter with Windows Media Center. You can also visit the article to learn more about the protocols that Media Center uses to broadcast.

Hope this helps and let us know if you need more assistance. We will be happy to help you.

Tags: Windows

Similar Questions

  • Windows 8 Media Center video & music files on my laptop has been corrupt.

    Windows 8 Media Center video & music on my laptop has been corrupted. Play the video but without any noise.

    All the audio controls are set to maximum volume I discover on the sound settings of Realtek video & its drive of the laptop. The following message shows on the properties of Audio Realtek High definition that thedevice working properly«»

    Please someone help to specific steps to follow to fix my media library without spending money.

    I am a retiree and would really appreciate help online to fix my media library.

    Thanks for the help, Chris

    Hello

    Thanks for posting your query to the Microsoft forum.

    I appreciate your efforts to try to solve the problem and I will definitely help you with this.

    You have sounds in Windows?

    I understand that you have tried all the troubleshooting steps, to repair Windows Media player, you can follow the methods below:

    Method 1: Run Windows media player convenience store settings and check.

    a. press the windows key + W and type Troubleshooting.

    b. Select Troubleshooting.

    c. Select display all on the upper left corner.

    d. run Windows media player settings troubleshooter.

    Method 2: Uninstall and reinstall Windows media player.

    I suggest trying the deactivation and activation windows media player by following the steps below and check if it solves the problem.

    1. press Windows key + R to open the run command.

    2 type appwiz.cpl , and then press enter to open programs and features.

    3. click on "turn on or off windows features".

    4. uncheck the 'multimedia' and click ok.
    5. restart the computer when you are prompted.

    6. repeat step 1-3 and check the "multimedia functions".

    7. click on Ok.

    I suggest also refer to the link below for more information on the types of media files that supports Windows Media Player.

    Types of files supported by Windows Media Player

    If you do not have Windows sound, please visit the link below:

    Method 3: Follow the steps in the link given below

    No sound in Windows

    Let us know the results. Thanks for posting for further assistance, we'll be happy to help you.

    _______________

    Thank you best regards &,.

    Isha Soni

  • Media Center video error Qosmio G20

    Hi, I am unable to watch TV via Media Center. In the first when asking to watch live TV, I get ERROR VIDEO coming in the display window. I also get an error message stating: not found Tuner, the tuner is defective or not installed. Make sure that the tuner hardware and a valid tuner hardware driver is installed. I'm under V5.1.2715.2941 of MCE 2005 update rollup 2. As far as I know tuner and driver are installed and OK. Would appreciate any help you can offer. Thank you very much

    Post edited by: [email protected]_UK

    Hello

    I put t know if you have the video error or decoder, but please check this document http://support.toshiba-tro.de/kb0/TSB59015P0006R01.htm

    Maybe this will help.

    Good bye

  • Media Center Video card not detected error

    Media Library on my s3580a Slimline has suddenly stopped working.  Error bed undetected graphics card.  I followed the instructions to fix on the HP page. Hardware diagnostics shows no problem with the card.  Changed service Media Center receive and rebooted as suggested.  Have removed and reinstalled the PCI card. Used Recovery Manager to recover an hour before the error. PC was not connected to the network, so no update driver has occurred.  Searched drivers updated in any case but none are available and existing HP driver refused to load because it is the same version.  Can someone please?

    Crow, here's the latest nvidia driver for your video card.  Once you install it, let us know if it works.  If this isn't the case, we will return to the drawing board until what we solve your problem.

  • All of a sudden no sound in Windows Media Center, video playback. No problem with the same files in media player

    My windows media center vista has all of a sudden start to turn off randomly and restart by itself, about 3 weeks ago.  Now, he has lost his.  When I'm going through orders, no sound.  Video games, no sound.  I can still get sound for mp3, but not video.  I can play the same video in media player without any problem.  Can anyone help?  I have Vista Ultimate, service Pack2.

    Hi Doramon,

    Welcome to the Windows Vista answers Forum!

    What are the file extensions you are trying to play?

    This could happen because some of the types of files supported by Windows Media Player are not supported by Windows Media Center.

    To check the file types supported by Windows Media Center please visit the below given link:

    Types of files supported by Windows Media Center

    http://Windows.Microsoft.com/en-us/Windows-Vista/file-types-supported-by-Windows-Media-Center

    You can also try and run the System File Checker tool. This would be in repair of the system files that may be damaged.

    Scan SFC enforcement procedure:

    1. click on the Start button

    2. on the Start Menu, click all programs followed by accessories

    3. in the menu accessories, right-click on command line option

    4. in the drop-down menu that appears, click the "Run as Administrator" option

    5. If you have the User Account Control (UAC) enabled, you will be asked permission before the opening of the command line. You simply press the button continue if you are the administrator or insert password etc.

    6. in the command prompt window, type: sfc/scannow then press enter

    7. a message is displayed to indicate that "the analysis of the system will start.

    8. be patient because the analysis may take some time

    9. If all the files need replace SFC will replace them. You may be asked to insert your Vista DVD for this process to continue

    10. If all goes although you should, after the analysis, see the following message "Windows resource protection not found any breach of integrity.

    11. once the scan is finished, close the command prompt window, restart the computer and check.

    This would take care of the issue that you are facing.

    For more information, please visit the below given link:

    How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista

    http://support.Microsoft.com/kb/936212

    Hope this information is useful.

    Amrita M

    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • slowing suddenly, poor performance of Media Center, video breakup. __

    The same day (2.05.11) this Office trial has expired, and IE updated itself (Solution Explorer images became transparent), performance is significantly slowed. video but not audio break-up/freezing. mouse/slow scrolling and sliding, etc.. Uninstalled Office apps of the trial as editor, but on reboot, video problems returned. GeForce 8400 Gs. definitely not a hardware problem.

    Hi cybatrax,

    1. did you try to install IE 9 beta?

    Method 1:

    You try to install the windows update and also try updating the chipset and all the device drivers and check.

    Links:

    Install Windows updates

    http://Windows.Microsoft.com/en-us/Windows-Vista/install-Windows-updates

    Update drivers: recommended links

    http://Windows.Microsoft.com/en-us/Windows-Vista/update-drivers-recommended-links

    Method 2:

    Step 1:

    You can check the following link and try to run the Fixit of performance and check:

    http://support.Microsoft.com/mats/slow_windows_performance/

    Step 2:

    You can also check out the following link and try the steps suggested to optimize PC for better performance.

    Check out the link:

    Optimize your computer for peak performance

    http://www.Microsoft.com/athome/Setup/optimize.aspx

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • my xp media center 2005 gives an error "the video decoder is currentley in progress for use by another application"

    my xp media center 2005.

    whenever I try to use my media center ' video decoder is currentley in use by another application close all applications and restart the Media Center»

    I have no other programs running and have no idea what as happened to create this problem

    Suggestions: -.

    1] uninstall and reinstall the video decoder.

    If the above does not help, then

    2] uninstall and reinstall the tv tuner card driver. Visit the manufacturer's Web site to download and install the latest compatible driver.

  • After installing new hard drive, video card or drivers are not compatible with Windows Media Center on Windows XP

    After a computor crash and the new hard drive, my disk drive does not work in media center "video card or drivers are not compatible with media center.

    Probably a matter of resolution: you will need to install the specific video drivers XP laptop computer PC manufacturer's Web site.

    See you soon,.
    Jerry

  • XP Media Center - TV made a break of 3/4 of a second, play 3/4 second - uninterrupted

    SYMPTOMS:
    Watch TV on Media Center - video (no audio) pauses for 3/4 of a second, 3/4 of a second plays, pauses for 3/4 second - continuous loop. Low 5th screen is green (a rectangle at the bottom extending on both sides).

    If I play previously recorded TV in Media Center (as of when this was not the case), the record plays perfectly. I recorded a 1/2 hour television show
    with Media Center, reduced to a minimum (so it has not tried to view it), and I had 1/2 hour of this continuous with the Green interruption when I played the
    record. I can play DVDs perfectly with Media Center.

    If I use the pinnacles TV software, I can watch the TV OK. (But I don't use that - I love Media Center - the program guide, the search program, saving options,)
    and the fact the the infrared diffuser Windows automatically changes channels on DirecTV area.)

    WHAT CHANGED: I got a new card mother and graphics card. (My old card mother w/graphic edge fries a second chip memory in 4 months - so he got canned.)
    Motherboard: Intel Desktop Board DG41RQ. 2.7Ghz dual Core Intel; w/2 GB of ram.
    Graphic card: EVGA GeForce 9500 GT (PCI) (GPU Nvidia w/1 GB memory)
    There is no yellow? /!'s in Device Manager.

    I always use the Pinnacle PCTV HD PCI - TV tuner card. The DirecTV cable goes to him.

    O/s: Windows Media Center (2005) w/Update Rollup 2. Window XP Home SP3 w/all updates.

    The Microsoft Windows XP Video Decoder Checkup Utility reports that CyberLink is the preferred decoder. No new decoders are on the list after
    installation of the software of the graphics card.

    WHAT I TRIED: uninstall/reinstall - Media Center Update Rollup 2, the drivers of graphics, Pinnacle and PowerDVD 8 pilots (the
    Video decoder CyberLink - I checked that it was out of the list in the utility before reinstalling). Changing the video settings in Windows and on the Nvidia Control Panel. Hours and hours of Googling.

    I solved this problem by using the S-video output of the DirecTV box (for the TV Pinnacle card) instead of the coaxial output.  It does not seem logical, as the Pinnacle TV playback software worked fine when the coaxial cable has been used, but Media Center doesn't have, and Media Center worked fine before with one coax input with the other motherboard w/integrated graphics card.  Thus the output of the Pinnacle card inside the computer must differ with the coaxial - quite different input Media Center fails with the new (and better) motherboard and card graphics - but not quite different than the Pinnacle TV player also fails.  I guess that Media Center is more sensitive to the part of the signal being screwed up.  Image quality was very good with the coaxial input (on Pinnacle TV player and Media Center with old graphics card w / integrated motherboard).  Googling for the difference between coaxial and S-video, S-video will give quality & eacute - somewhere between negligible and much better.  I do not see a difference - but if I had them side to side I could.  In any case, I can watch TV now - so I'm done with that.

  • Media Center: Will not add folders to the library

    For about a week now through yesterday morning, I had several video files put in place in Media Center: specifically, two folders on local and network disks several (five or six) on records.

    Last night, I went to the video library in Media Center, and it was completely empty. Records and all video files are always accessible through the browser and the network as needed, so I go to Media Center and re-add the same folders. Return to the video library. It is empty. I will go back to the library settings and all defined records are previously selected is no longer! So I go through and add them back. Only to make them all disappear.

    I do this several times, including the second to the last test where I waited in circles and looked at the gauge progress and a total number of 300 + video files displayed. But the library is still empty and not setup all files as added!

    So my last try: I remove all other music and image files and add just a video file. And still no videos!

    I already rebooted once and now I am at a complete loss as to what could be the problem. The files are a mix of .avi (xvid, for the most part), .mkv and .ts who worked before this question last night.

    I said that I should leave the Media Centre, stop the windows media player network service, and then remove windows media player db file. I did all this, restarted the service and then media center, added a video file and guess what? Still no file (or folder) in my Media Center video library.

    What is happening here!

    Edited to add:

    Well, I did a few experiences more.

    In Windows Media PLAYER, I wasn't able to add folder to library video (via organize) it is. However, I was able to add folders to the library in Windows Explorer. I could then drag and drop the Windows Explorer video library in WMP. However, none of this has changed the fact that the video library in Media Center remains empty and I can not add ALL the video files via the parameters.

    In the meantime, I have two choices, I can browse my multimedia files via WMP which is not half bad but I prefer reading via Media Center. so... currently, I navigate through Explorer Windows and Media Center set as default player for all types of video file in the video library of the Explorer.

    However, I would really like this work all through (some) Media Center :)

    I wonder if there might be a corruption of the current library which is not resolved by simply removing the CurrentDatabase_ # .wmdb as suggested earlier.  You see the question even if you plan to display this content in Windows Media Player as well?  If so, in Windows 7, there is an option to rebuild the library.  This is done through Windows Media Player tools > advanced > restore library... menu (an open area along the top or bottom of the drive to find this right click menu).

    Thank you

    Chad

  • Windows Media Center error C00D1199

    I used a program called BandiCam save games/windows on my Windows 7 computer. I recently upgraded to a 2 TB HARD drive and transferred all my files to the new disk. None of the Windows files were transferred by my request and now Windows Media Player cannot read the. BandiCam AVI files. I've read that it could be the Codecs of compression used by Bandicam however until I transferred all my files he was running fine records. I tested on my laptop with the same file, and it worked fine as well. Is there a debug/repair for Windows Media Player program? Or could I just re - install completely? It always shows the error code: C00D1199

    Hi Oliver Vakomies,

    Follow the steps in the link to fix the problem:

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-pictures/Windows-Media-Player-error-code-C00D1199-when/c9db74a9-21eb-48d2-AE00-cc8137ab9c37

    http://Windows.Microsoft.com/en-in/Windows7/C00D1199

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-pictures/Windows-Media-Player-11-Vista-Home-Premium-x86/1c472db0-D51C-4bba-baf7-f8ebde659949

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/Windows-7-Media-Center-video-error/2449c753-db70-422A-B67D-ca1d40677b2a

  • Qosmio G20 Media Center crashes when using video or TV

    Since April 2006 whenever I try to use the Media Center it crashes when I try to play a DVD or to use the TV. It seems to be a video display problem.
    Can someone advise me on this?

    Hello

    This problem occurs since the first day of the purchase of the laptop?
    Did you install any codec's or 3rd applications?
    It's not easy to say why it happens, but if you think that it s a display driver problem then you can try to update the graphics driver.
    If it doesn t help it would be very interesting to know if this happens on the laptop picked up fresh.

  • Pavilion Media Center m8430f Desktop video card replacement

    For about a month now my desktop computer Pavilion Media Center m8430f is at the origin of the yellow spots, blue stripes and dots to arrive on the screen then the computer hangs. Moniter is a G185h Acer which I use from 2010 when the original monitor is released.  I also get yellow wavy lines then in safe mode.

    So the thought is the video card went bad and needs replaced.  I picked up a Galaxy GeForce NVIDIA GT 610 to replace the NVIDIA GeForce 8500 GT. Two questions - will be my Pavilion Media Center m8430fbe to handle this card? How could I go on install?  I checked the instructions to install a new video card, but none of them relates to my machine.

    I thank you in advance for any help or insght, you can give in this case.

    According to the specifications of your desktop PC and your new GalaxyTech video card, it should be a good fit and work without problems.

    You connected a different view to make sure that was not the view South instead of the video card prior to purchase of the video card?

    I will try to find a video for you on how to replace the map.  Fact!

    The video I found must be adapted. Your original PCI Express X 16 video card not a probably not power connector 6 pin which is described in the video, or the connector on the fan.

    The video author does not mention it, but for safety reasons, remove the power connector. Unplugging everything. Working with the PC as it does and use a table or a workbench with everything external to the offline desktop.

    How to open the case

  • Solution needed! can not play videos on media center via pc or xbox360

    When I click on media center to windows on my pc, I go to my videos click 1, and then press play, the media center closed its doors and only comes with error messages or anything and I'm back on the desktop. Is there a way to solve the problem?

    Hi Howstewdo,

    To help you better I would like to ask you a few questions.

    (1) since when are you facing this problem?

    (2) if it works well before?

    (3) you did any hardware or software changes on the computer?

    (4) what is the format of the file you are trying to play?

    (5) have you tried playing the file on another drive?

    (6) is this problem with media or all media?

    (7) this comes only on the same machine?

    You can also update your media center with the latest version of the codec software and see if the problem.

    Here is the link that shows the files that are supported by windows media center.

    Information about the media file types supported by Windows Media Player
    http://support.Microsoft.com/kb/245608

    Types of files supported by Windows Media Center:
    http://Windows.Microsoft.com/en-us/Windows7/file-types-supported-by-Windows-Media-Center

    Thank you, and in what concerns:
    Shalini Surana - Microsoft technical support.
    Visit our Microsoft answers feedback Forumand let us know what you think.

  • How to download a video from youtube on windows media center?

    I recorded a gameplay on my computer and it was recorded in Windows media center, how can I upload it to youtube?

    I recorded a gameplay on my computer and it was recorded in Windows media center, how can I upload it to youtube?

    ===========================================
    Your video file is not 'in' media library... it will be saved in
    a folder on your hard disk drive... probably your folder my videos.

    See the following articles:

    How to download YouTube videos

    How to put Windows Movie Maker video on YouTube?
    http://www.techburgh.com/2009/05/10/how-to-put-Windows-Movie-Maker-video-to-YouTube/

Maybe you are looking for

  • System tray icon says no connection... but I am connected

    I don't know if there is a way to solve this problem, but the system tray says I am not connected.  When you look at the network it shows my name of computers, a red x and the internet symbol is grayed out.  But when you click the icon with the yello

  • Satellite L500-1CQ and Win7 - CD plays badly after you import on iTunes

    Receive my Toshiba laptop yesterday and when import CD on iTunes than some of the CDs play hurt...I tried to play on media player and the same thing happens.The CDs do not play right and they are original and in perfect condition. I tried the CD on T

  • Uncaught exception on HttpConnection when the URL is blocked

    I access my request, a service URL web restful. Whenever the device is connected, but the URL is not accessible or non-responsive for some reason, I get an untrapped exception. All I want is to catch the exception and displays an appropriate message.

  • DBF file get corrupted

    Hi, someone at - it never gets their dbf table go corrupt? I don't get my data or corrupted in any other software in my computer different ArcView files. So, I don't think I have a virus. It almost seems like a glitch in the program, the reason is pe

  • highlighting the names of files in Explorer

    Is there a way to clear or color code of the names of files in windows Explorer?