Shifts the Focus to the Manager.

Similar Questions

• How to control the Focus in landscape Manager.

  Hi friends,

  I have a small doubt to control focus on the Manager.

  in my third-party application, I add two fields at Horizontalmanager and that the Manager (Manager level) to the Manager of the vertical. so when I scroll first means down development is the first field to the entire screen. next time, I scrolled to the top of the bottom, then the focus is on the last field. here what I want is from bottom to top that will focus on the first field not a last field. How to do this.

  Please help me friends.

  Thanks in advance.

  Thank you simon_hain,

  Are finally corrected this problem.

  Here I'm just my managers onFocus method substitution.

  TO

  super.onFocus (1);

• move the focus from the field to the Manager

  Help!

  I have a HorizontalFieldManager with some fields inside. When I touch on the hfm, I want that he win the tune-up. Everything is fine with the BlackBerry without a touchscreen. I can scroll all hfms.

  But when I touch on the subject of the focus in the hfm gain the focus and not the hfm. How can I change?

  When I want to get the Manager on the ground and give it focus that nothing changes. Call this.setFocus () in the manager didn't make when press the subject field of the focus. When I touch outside the scope of field, everything is fine!

  I have no idea!

  Can someone help me please?

  Concerning

  When the fields are non-Focus, you can still have a NullField focusable.

  a non-trivial alternative might be to manually indicate the development of the manager through the methods onFocus() and onUnFocus() of the field that is getting the focus

• Vertical shift in the management interface?

  Hello

  On the PS6110, I know that this vertical failover works fine on the eth0 interface (10 Gig iSCS).  I tested several times and when I unplug eth0 on the (generally CM0) active CM, iSCSI traffic crosses to eth0 on the other CM (i.e. CM1).  Works very well.  However, when I unplug eth1 (management, 100 Mbps copper interface), failover to the interface on the other CM eth1 does not seem to occur.  Is it normal?  Is there a way to allow vertical failover for the management ports?

  Thank you

  Bill

  Hello Bill,

  No, h/s does not support that.  You will need to connect the two ports of Mgmt.

  Kind regards

• Navigation by clicking of the manager that affect the present ActiveRichTextField in the Manager.

  Hi all

  I have a HorizontalFieldManager containing different custom fields, among which ActiveRichTextField is one of them. I gave a click of navigation for the Manager in the code:

  protected boolean navigationClick (int status, int time) {}
  {if (Touchscreen.IsSupported ())}
  Returns false;
  } else {}
  fieldChangeNotify (1);
  Returns true;
  }
  }
      
  protected boolean touchEvent (TouchEvent message)
  {
  If (TouchEvent.DOWN is {message.getEvent ()})
  FieldChangeListener listener = getChangeListener();
  If (listener! = null)
  this.setFocus ();
  }
          
  If (TouchEvent.CLICK == message.getEvent ())
  {
  FieldChangeListener listener = getChangeListener();
  If (null! = earpiece)
  this.setFocus ();
  listener.fieldChanged (this, 1);
  }
  Return super.touchEvent (message);
  }

  and then treatment to the touch by using FieldChangeListener. When I click on the ActiveRichTextField contained in the horizontal field Manager, action for, click Manager is run. Please can someone tell how this can be avoided. Thanks in advance.

  "If this field with focus is instance of ActiveRichTextField I should call super.touchEvent ().

  No, if you put the code in navigationClick...!

  Putting this another way, I mean:

  Super. ();

  "I can't choose only one of the fields to handle the click event of the manager that my requirement is to treat the click, clicking anywhere on the Manager."

  I think you can do it, because the movement key or trackpad will move the focus in one of your fields, and assuming you have only two fields focusable in the Manager, then it will be your ActiveRichTextField or your field.  As mentioned, managers do not get then to enter a Manager, the BB a to move the focus to a focus scope.

• touch events for several fields in the Manager of several

  In my application... I have a vertical field (VFM) Manager in the screen.

  In this optimization of resources, I inserted 3 manaagers:

  (1) District Manager hfmHeader horizontal (in which I added 1 label (NON_FOCUSABLE) and 1-2 Btns according to the conidtion (tuochEvent FOCUSABLE and overrried all in initlilsing it).)

  (2) District Manager vertical ListField container or TextField or LabelField vfmManager in accordance with the condition.

  ((3) District Manager horizontal hfmButtons containing 6 btns... all tuochEvent FOCUSABLE and overrried initlilsing while the).

  public int getFieldAtLocation (int x, int y)
  {
  XYRect rect = new XYRect();
  int index = getFieldCount()-1;
  While (index > = 0)
  {
  getField (index) .getExtent (rect);
  If (rect.contains (x, y))
  break;
  -the index;
  }
  return to index.
  }

  Second, the click event try something like:

  protected boolean touchEvent(TouchEvent event)
  {
     switch( event.getEvent()  )
     {
          case TouchEvent.CLICK:
            int index = getFieldAtLocation(event.getX(1),
                                           event.getY(1));
            // Ignore click events outside any fields
            if (index == -1)return true;
            Field field = getField(index);
            if(field.equals(bitmapField))
            {
              System.out.println("Bitmap Clicked");
            }
          return true;
     }
     return super.touchEvent(event);
  }
  

  Even when I am using above solution, can't scroll. and click event of the hfmButtons buttons aren't the gt performed.

  Second... If I don't stand... I am able to scroll and executed at least the first 3 buttons click event.

  How can I implement for each button click event in any Manager? Is this possible...

  Can someone please help in this regard. Any suggestion or if possible code snippet will be appreciable.

  Thank you

  Use the snippet for each manager of...

  case TouchEvent.CLICK:
  India = getFieldAtLocation (event.getX (1),)
  event.getY (1));
  If (India! = - 1) {}
  Field fm = getField (India);
  {if (FM. Equals (vfmMain))}
  int index1 = vfmMain.getFieldAtLocation (event.getX (1),)
  event.getY (1));

  If (index1 >-1) {}

  Field = vfmMain.getField (index1);

  check field is instance of the field you want

  {if (Field.Equals (footerManager))}
  Container.isFooterManager = true;
  int index2 = footerManager.getFieldAtLocation (event.getX (1), event.getY (1));

  Search fields in the Manager of this...

  } ElseIf... {

  go on the same cehcking

  } ElseIf {}

  ... like this, go to the control...

  }

  }

• How to set LabelField at the bottom of the Manager

  

  How can I create a layout like these?

  Im trying to put the labelfield2 on the bottom of the Manager but sound always fail... its always stay below the TextField

  I create these layout using HorizontalManager as high parent and add verticalmanager and bitmap.

  on vertical Manager, I add the label 1 field, textfield and label of field 2.

  Thank you.

  This code that im using

  //called the constructor of HorizontalFieldManagersuper(USE_ALL_WIDTH);
  imageField = new BitmapField(image,FOCUSABLE);
  add(imageField);
  VerticalFieldManager dataContainer = new VerticalFieldManager(USE_ALL_WIDTH);
  add(dataContainer);
  title = new LabelField("title");
  time = new LabelField(timeValue,Field.NON_FOCUSABLE | Field.FIELD_BOTTOM);
  text = new EditField(data.data, EditField.READONLY);
  dataContainer.add(title);
  dataContainer.add(text);
  dataContainer.add(time);
  

  This should help you:

  http://supportforums.BlackBerry.com/T5/Java-development/create-a-custom-layout-manager-for-a-screen/...

  for easier positioning you can also use methods setMargin/setPadding fields and managers, but crush sublayout is usually the cleanest method for complex page layouts.

• Storm: is it possible to resize the horizontal width of the Manager?

  Hi all

  Is it possible to resize the horizontal width of the Manager. I want to create two buttons in horizontal management, set the border background. I use the following code to do this. It works very well. But as there are only two buttons and does not occupy the whole of the 320 width screen, frame border is happening only for these two buttons background. So I could see the spaces apart from the horizontal width in front and in rear areas. So I want to create a horizontal Manager himself with a width of 320, so that the layout border color indicates the full width. Is it possible to resize the horizontal width of the Manager?
   
  XYEdges borderColor = new XYEdges (Color.BLACK, Color.BLACK, Color.BLACK, Color.BLACK);
  NoPadding XYEdges = new XYEdges (2, 2, 2, 2);

  HorizontalFieldManager hzBtnFldManager = new HorizontalFieldManager (HorizontalFieldManager.FIELD_HCENTER);

  new CustomControl = createButton ("Create", ButtonField.FOCUSABLE |) ButtonField.CONSUME_CLICK | ButtonField.FIELD_HCENTER, 83, 15);
  cancelButton = new CustomControl ("Cancel", ButtonField.FOCUSABLE |) ButtonField.CONSUME_CLICK | ButtonField.FIELD_HCENTER, 83, 15);

  hzBtnFldManager.add (createButton);
  hzBtnFldManager.add (cancelButton);

  At the border btnBarPaddingBorder = BorderFactory.createSimpleBorder (noPadding, borderColor, Border.STYLE_SOLID);
  hzBtnFldManager.setBorder (btnBarPaddingBorder);
  hzBtnFldManager.setBackground (BackgroundFactory.createSolidBackground (Color.GRAY));

  this.setStatus (hzBtnFldManager);

  Resolved using HorizontalFieldManager (Field.USE_ALL_WIDTH);

• Overlay in the Manager field

  I have a related question to display that I have not been able to answer. It relates the point c below.

  Scenario:
  Let's say I have 5 cards in hand.
  a. I want to display the cards in a row, one next to the other, BUT with the cards overlapping partially (just like how you would hold some cards in your hand while playing a game).
  b. once I posted the cards, I want to be able to move the focus from one card to the other as I scroll using the trackball
  c. when any card is the focus, I want this card to be superimposed over all cards - in other words, if this card was partially shown because he was behind another card, but, when it gets the focus, it must show itself completely before any other map so that it is completely visible.

  I was able to achieve (a) and (b) thanks to the API documentation, and thanks to what I learned from the responses on crackberry forums. To achieve (a) and (b), each of my cards is a BitmapField and I have a Manager customized to help me display and scroll cards.

  However, I am NOT able to (c) above. It seems that the Manager (net.rim.device.api.ui.Manager) displays the fields in the same order that they were added to it. So if you add Field1 to the Manager before you always add Field2, then the Manager (Yes, always) displays Field1 below or under Field2 in the event of partial overlaps between Field1 and Field2. I found that the only way to work around this problem was to 'remove' field1 of the Manager and "add" it to have it above Field2 in the display. I find this ridiculous workaround solution because intuitively adding / removing fields from a Manager and fixing these fields display problems seem irrelevant to me. So is - can anyone help with a better solution?

  Thank you!

  It's still not not clear to me what you want. Manager of application areas are drawn is in default is order of adding to the Manager with drawn up targeted field. For me, it's a quite logical. If you really need, you can change this substituting subpaint handler method and calling paintChild for children of fields in an order that you want. However I don't think that's what you want. For me, it's a lot more easy just add fields to the Manager in the order appropriate to customize the Manager to paint them in the order you want. That is to do something like this

  int [] rndm = {1,4,2,0,3};for (int i = 0; i < 5; i++){   mgr.add(new BitmapField(createImage(rndm[i]), Field.FOCUSABLE));}
  

  This way is much better, because the order of default naviagtion is also specified by field addition of order. There is no GOT behind the RIM Manager implementation that can guess the order of presentation of the user interface. Of course you can change it as well by substituting the nextFocus method, but why do you need all this in the first place? It's not clear to me this behavior you want to change in my example. What is the expected behavior? For me it all friendly a), b) and c) restrictions. I missed something?

• I have a few email addresses; the Manager is no more funktion

  Hello
  I have a few eMail addresses managed with the Thunderbird Manager.
  Since yesterday, if I run Thunderbird with "Thunderbird.exe Pei" I do not understand the Manager said all the eMail addresses but it starts just to a particular e-mail address.
  It's as if I run cmd then... What's the problem?
  Kind regards

     Klaus
  

  I hope that you do not use the "" off Pei
  It just open run and only type: thunderbird Pei
  If you type the entire address, it must be
  "C:\Program Files (x 86) \Mozilla" PEI

  I hope you didn't have a new profile for each e-mail account? I was a little confused that you were talking about e-mail addresses and no profiles

• The Manager of bookmarks disappeared from Firefox V 7.0.1 using Mac OS 10.7.1; How edit, delete, and rearrange bookmarks?

  No installation to the management (editing, deleting, rearranging) bookmarks appear in the Favorites tab.

  You do not have a menu called view all bookmarks, under bookmarks?

• When he puts an end to Firefox 3.6.6 firefox.exe continues to turn, visible in the Manager of tasks (XP) and stimulates the activity of the CPU up to 60% with the danger of overheating. Have not found an appropriate response with the search term "abnormal

  When he puts an end to Firefox 3.6.6 firefox.exe continues to turn, visible in the Manager of tasks (XP) and stimulates the activity of the CPU up to 60% with the danger of overheating. Have not found an appropriate response with the search term "abnormal termination of the program."

  This has happened

  A few times a week

  is after update of Firefox 3.6.4

  I have the same problem with Firefox 3.6.6 except that it also consumes massive amounts of CPU during the race. This version also adds a new process on your system. I am running XP and in the beginning I tried to disable some plug-ins. Always consumed too much memory. I went back to version 3.6 and the new process went, and the CPU consumption is way down. Something is wrong with the latest version of Firefox, I never saw behave this way. Revert to a previous version (Filehippo) and you will see the difference.

• the Manager passwor used always ask if I wanted a password remembered, count about three days, it is most requested.

  I use the password manager. Firefox used to ask if I wanted a saved password. I have some passwords saved in the Manager, but he adds no news because it is more requested

  This has happened

  Each time Firefox opened

  == I've updated firefox

  Make sure that you are not running Firefox mode of private - browsing using Firefox without saving history .
  In private browsing mode that some menu items are disabled (in gray) and some features like the visited links and others are disabled and does not.
  You're in private browsing mode, if you see "tools > stop private browsing."
  See Private Browsing - use Firefox without saving history and http://kb.mozillazine.org/Issues_related_to_Private_Browsing
  .....
  You enter private browsing mode, if you select: Tools > Options > privacy > History: Firefox will be: "don't forget the story ever.
  To view all the history settings, choose: Tools > Options > privacy, choose the setting Firefox will: use the custom settings for the story of
  ---
  http://KB.mozillazine.org/User_name_and_password_not_remembered
  http://KB.mozillazine.org/Password_Manager

• Yoga 2 Pro and the management of energy on earn 10. Yellow 'fix' does not.

  After the upgrade to Windows 10 to the color yellow "fix" included in Lenovo Power Manager, does not work.

  With Windows 8.1, I could see the yellow on-screen transition from mustardie to a more pleasant shade when the Manager of energy was loading. With Win 10, that no longer works even though the energy Manager seems to work ok for other functions.

  Is it me or is this a general problem?

  I uninstalled the Intel graphics drivers and energy Manager and reinstalled in that order, and now everything seems ok. Thank you for your help.

• I had installed windows 8.1 with bootcamp, it was a c drive and I tried to do a second drive d with management of the disks, but when I shrink c drive and format the partition which was made by the management of the disks to d ' training, it destroyed my

  I use macbook pro.

  I had installed Windows 8.1 with bootcamp, that there was a c drive, then I tried to do the second drive with disk management d when I shrink the c drive and format the partition which was made by the management of the disks to d ' training, it destroyed my mac osx.

  Please help solve this problem.

  This partitioning is not supported. Please download GPT Fdisk from http://sourceforge.net/projects/gptfdisk/ and install it on the Windows side. Once it is installed, thanks for posting the output as indicated in the CMD window.

  

• Where can we make a complaint against a supervisor who would not transfer the call to the manager when we asked politely?

  We have been calling the after-sales service for two days now trying to solve my iPhone 4S that I give to my mother. We get the same error message this iphone cannot be used it is lock by user etc... We asked technical assistance from apple and they asked the bad of security issues, we gave them the answer every time and they said its wrong so we gave them all the answers that we know and was advised that it would take 8 hours then reminder still once because we have exceeded the many times answered us the questions. We asked for others to get the phone activated and they said no. we need to wait even 8 hrs again and do the same thing. Which HELLO! If the problem is not solve this fine way in other words, you just found your customers so frustrated the way you manage your calls! as SIMON said there is support higher than they and would not transfer the call to the manager when he cannot even solve or think of any other solution to solve the problem was rough and we asked him politely to let us speak to a Manager and he decline, even when we told him that we him he always refuse to give us a Manager will increase. We also work for a BPO company and we work for climbs and when the customer ask for the 2nd time a Manager you would not drop this cause to request that they have their talk. So far our determination was not due to customer service poor guys provide. We need someone who has a great understanding and has more knowledge about the product to help us. Please help us.

  You do not talk with Apple here - we are just users like you

  And here is the information that can help with what you're trying to do

  What to do before you sell or give away your iPhone, iPad or iPod touch - Apple Support

  (1154)