shortcut for charmap GOLD 'control panel '.

There should be an obvious way to shortcut for charmap, any destination control panel and anywhere you could want to go quickly and often.

I use Win7, so it's a little different. When you get to the final destination, look at the address bar. Y at - it a small icon at the left end of the address bar? You can only drag on the desktop?

Tags: Windows

Similar Questions

  • Client services for Netware in Control Panel

    I tried to follow the steps to uninstall CSNW, but he did not appear in the Properties Windows.  The only place where I can find it is in the Control Panel, but I can't remove it from there.  I tried dragging it to the top of the desktop, but it doesn't work.  I want to get rid of it, so I can use the Welcome screen.  It doesn't seem to be doing anything else, but keeping the work welcome screen.

    Any help will be appreciated

    rgma_8

    Hi Rgma_8,

    You can not remove the Client Service for Netware in Control Panel, you must uninstall the service. You can access the link below and follow the steps in the article to uninstall the Client Service for Netware on a Windows XP computer.

    http://support.Microsoft.com/kb/315347

    I hope this helps. Let us know the results.

    Thank you and best regards,

    Srinivas R

    Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • ERROR: CANT FIND SHORTCUT for hp aSSISTANT

    After re installation wizard HP click HP Advisor succesfully scrolls tp Assistant and received the error message "shortcut cannot be found ' how can I create a shortcut under HP assistant control panel attended but could not be shortened

    Thank you!

  • Error: could not find everything in trying to access Add / Remove programs in the control panel

    Title: cannot open Add/Remove programs in the control panel

    When I try to open Add/Remove programs in the Control Panel, I get a message that it can not be found.  What should I do to repair this?

    Hello

     
    -Did you do changes on the computer before this problem?
     
    Method 1: I suggest you to follow the steps and check if the problem persists.
    (a) click on Start, run, type cmd and press enter.
    (b) in the command prompt, run these commands:
    regsvr32 Jscript.dll
    regsvr32 Msi.dll
    regsvr32 Oledb32.dll.
    regsvr32 Msado15.dll.
    regsvr32 Mshtmled.dll
    For reference:
    Control Panel not responding in Windows XP
     
    Method 2: If the problem persists, I suggest that allowing you to run the system (CFS) files Checker scan to fix corrupt files.
    Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
    http://support.Microsoft.com/kb/310747

    Method 3: An analysis using the Microsoft safety scanner.
    http://www.Microsoft.com/security/scanner/en-us/default.aspx
    Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

    Hope this information helps.

  • Some windows, such as Control Panel does not open in Windows Vista

    I recently installed Windows Vista. When I try to open some windows, for example, property, Control Panel, either nothing is past or a brief flash of the window opening and immediately closing. I tried restarting the computer and checcked for viruses. The installation has been enabled.

    To see if a fix is available

    In Control Panel (and select Classic discovered in the left pane) select reports on the problems and Solutions (problem of type in the START search box), go to historical problem, right-click of your error and choose check for the Solution.

    You can also right-click and choose Details for more information. Post these details here. The name of the Module fault is important information.

    Close the browser and start a command prompt
    • Close Windows Explorer
    • Start - All Programs - Accessories - right on command prompt and choose run as administrator.
    • Click Start. Ctrl + Shift + Right-click on an empty spot (just above the power of buttons is one place) then Exit Explorer.
    • Press Ctrl + Shift + Esc
    • Control all processes to explore are closed. On the process tab select explore and right-click and choose end process, repeat if more of an Explorer in the list.
     
    Then to restart the Explorer after trying all of the following
    • Press Ctrl + Shift + Esc
    • In the Task Manager, click the file menu and then click new task (run) and enter explorer
    Reregister the shell registry entries
     
    Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).
     
    regsvr32 /i shell32
    regsvr32 /i urlmon.dll
    regsvr32 RPCRT4.dll
    regsvr32 PROPSYS.dll
    regsvr32 MSCTF.dll
    regsvr32 cscui.dll
    regsvr32 rsaenh.dll
    regsvr32 timedate.cpl
    regsvr32 ATL DLL
    regsvr32 OLEACC.dll
    regsvr32 actxprxy.dll
    regsvr32 USERENV.dll
    regsvr32 msshsq.dll
    regsvr32 NaturalLanguage6.dll
    regsvr32 thumbcache.dll
    regsvr32 WINTRUST.dll
    regsvr32 MMDevAPI.DLL
    regsvr32 audioses.dll
    regsvr32 audioeng.dll
    regsvr32 ExplorerFrame.dll
    regsvr32 msi.dll
    regsvr32 FirewallAPI.dll
    regsvr32 netshell.dll
    regsvr32 pnidui.dll
    regsvr32 QUtil.dll
    regsvr32 c:\windows\system32\wpdshserviceobj.dll
    regsvr32 WINHTTP.dll
    regsvr32 C:\windows\system32\qagent.dll
    regsvr32 C:\windows\system32\portabledeviceapi.dll
    regsvr32 wbemprox.dll
    regsvr32 wbemsvc.dll
    regsvr32 fastprox.dll
    regsvr32 imapi2.dll
    regsvr32 wshext.dll
    regsvr32 gameux.dll
    regsvr32 msxml6.dll

    regsvr32 vbscript.dll

    regsvr32 jscript.dll
    regsvr32 wshext.dll
    regsvr32 wshom.ocx
    regsvr32 wshcon.dll
    regsvr32 scrrun.dll

    Delete folder settings
     
    Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).
     
    Reg delete "HKCU\Software\Classes\Local Settings\Software\Microsoft\Windows\Shell" /f
     
    Reg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Streams" /f
     
    Reg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\StuckRects2" /f
     
    Delete the thumbnail and icon Caches
     
    Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).
     
    del "% userprofile%\AppData\Local\IconCache.db".
     
    del "% userprofile%\AppData\Local\*.db".

     
    A boot is a way to explore
     
    It can be caused by a shell extension.
     
    The Explorer is built on addin programs called Extensions of Shell. The standard is provided by Microsoft, but programs add their own.
     
    Some people say that warn their pawns of viruses on this website. The software is perfectly fine.
    • Download

    http://www.NirSoft.NET/utils/shexview.html

    • Close Windows Explorer
    • Launch ShExView by right click and choose run as administrator
    • Disable all non-Microsoft shell extensions
    • Click Start. Ctrl + Shift + Right-click on an empty spot (just above the power of buttons is one place) then Exit Explorer.
    • Press Ctrl + Shift + Esc
    • Control all processes to explore are closed. On the process tab select explore and right-click and choose end process, repeat if more of an Explorer in the list.
    • Click the file menu and then click new task (run) and enter explorer
    and if it helps, re-enable one by one to identify the who.

  • vestige of purge control panel

    My Control Panel is a remnant of a deleted just the title program won't let me reinstall the program because he said we must remove this option is no longer available for me in Control Panel how to purge this line?

    Hello

    Microsoft has discontinued the download of the Windows Installer Cleanup utility and has issued a warning against its use:

    http://support.Microsoft.com/kb/290301

    "The Windows Installer Cleanup utility solved a few problems installing, it damaged sometimes other components installed on the computer." For this reason, the tool has been removed from Microsoft Download Center"

    Use at your own risk

    ________________________________________________________________________

    read this:

    How to troubleshoot issues that may occur when you install, uninstall, or upgrade one program on a Windows computer

    http://support.Microsoft.com/kb/2438651

    _________________________________________________________________________

    Try this, but do NOT use the part of cleaning of record:

    http://www.Piriform.com/CCleaner

    ________________________________________________________________________

    or reinstall the old version and use the FREE Revo Uninstaller uninstall then re-

    http://www.revouninstaller.com/revo_uninstaller_free_download.html

  • Cannot open any desktop shortcut, get this message: this file does not have a program associated with it for performing this action. Create an association in the folder option Control Panel > can't open anything in the control panel.

    Cannot open any desktop shortcut, get this message: this file does not have a program associated with it for performing this action. Create an association in the folder option control panel > can't open anything in the control panel. And when you try to download patches get message saying "microsoft cannot find the file. Tried to copy the 'rundll32.exe' file in system32 but does not work, can not even open the clock! Help, please.

    http://answers.Microsoft.com/en-us/Office/default.aspx

    Office at the above link forums

    XP forums:

    http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

    Link above is for XP Forums.

    There is a list of the different Forums XP to the link above to help you.

    You get the help you need there.

    Here is the Vista Forums.

    See you soon

    Mick Murphy - Microsoft partner

  • My Control Panel is missing for a while. How can I get that back?

    My Control Panel is out of the office.  Is no longer, I can scan, check ink etc. levels.  Where at - it go and how do I get it back?

    cfkola,

    Welcome to the HP Forum.

    I think you need to refer to the Solution Center printer software and not your control panel.

    Your Solution Center shortcut is perhaps missing - or there may be a deeper problem with your printer software.

    The easiest option would be to reinstall the full features software for your printer and see if that solves all problems at the same time.

    In most cases, for most printers, the solution center was replaced by the Printer Wizard shortcut.  It is just a new program that performs on the same things as the Solution Center.  Some people like better.  The interface is a bit different - many features are the same. for example, your analysis and ink verify functionality will be available.

    Instructions for (re) install the printing software are provided in this paper Dragon:

    Install the full features software - printer

    Click on the Thumbs - Up Kudos to show that you appreciate the help and time of our Experts.

    Although I strive to reflect best practices of HP, I do not work for HP.

    Click on accept as Solution when the answer is a good solution or workaround!

  • How to remove the shortcut from Control Panel wxp sp3 nindia

    I recently had one installed in my dell computor and the installed nividia graphics card updated driver from microsoft update was installed when I restarted computor I couldn't set the right res sreen and atempeted to go back to the previous driver and no video after reboot had to pull the agp card and use the onboard video , now I have a shortcut in my control panel ninvida nveiw I can't remove any help here please thanks David

    Are there NVIDIA stuff in Add/Remove programs to uninstall you since you do not use?

    What happens if you right-click on the offending Panel element and choose delete it?

    In General, it is never a good idea to accept and updates from Microsoft hardware Diver (video, audio, network, etc.).

    Microsoft doesn't know what kind of drivers you need, so if they are available, their decline and say MS Update never offer them to you again if you do not accidentally install their.

    If you need hardware drivers, it is best to get them directly from the World Wide Wide Web site for the manufacturer of your hardware device.

    If you have a nice NVIDIA card that is larger than your integrated graphics, you may want to consider to see if you can make it work!

  • If I click on anything whatsoever on my desk, a window appears: this file does not have a program associated with it for performing this action. Create an association in the control panel to define the Associations. "

    Original title: all my programs have become more associated with their shortcuts in my windows start.

    All my programs became most associated with their shortcuts. If I click on anything whatsoever on my desk, a window appears: "this file has no program associated with it for performing this action. Create an association in the control panel to define the Associations. " I must do this for each shortcut? Microsoft Word, all my accessories, none of the links are attached to nothing. Y at - it a quick fix to my problem, or I am looking at a restore of the entire system?  Help, please!

    Look at the tutorial on changing to default file associations.
    http://www.mydigitallife.info/how-to-edit-or-change-file-type-or-extension-associations-default-programs-in-Windows-Vista/

    It should help to solve your problem.

    Thank you

    Marilyn

  • Limit the control panel and IE for the Standard user account

    I'll set up a new computer for a 91 year old customer in a retirement home, who don't use the computer for e-mail and an occasional Wordpad document.  His son wants to put computer in place so that it cannot get to the Internet Explorer browser, or go to control panel, because he bumbles around the keyboard causing all sorts of problems requiring frequent service for me calls.

    The operating system is Windows Vista Home BASIC, so gpedit.msc is not installed.  I have activated the system administrator account for my use when I am called to repair the computer and set the Standard user to user account.  The problem is that the only way I found to disable IE and the Control Panel causes them be turned off in BOTH accounts.  I wish I could disable them ONLY in the user account.

    The only solution I found to disable the control panel is a registry hack in HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\Current versionpolicies where I put a DWORD 32-bit "NoControlPanel" with a value of 1.  I tried to do that in the HKEY_CURRENT_USER hive, but it had no effect.  This kind of work, but there are two problems then; Mises_a_jour Windows 1) won't install and 2) when I have to go to work on the computer, I first change administrator user, then change the DWORD value to 0 and finally to restart the computer, causing additional assignments, lengthen my time at work.

    Second, the only solution I could find to disable IE was in the default protrams Panel, which disables the administrator as well.

    Can someone tell me if there is another way to achieve this, while IE and control panel are disabled only for the user?

    Change the security to the IE executable rights? Remove 'Users', while you keep the administrator rights.

    For control panel see 'Method Two' in this link:

    http://www.Vistax64.com/tutorials/120951-Control-Panel-show-specific-icons-only.html

    "creacontech" wrote in the new message: * e-mail address is removed from the privacy... *

    Thanks for your response, but will not solve problem of this "gentleman". The object is not so much to limit internet access, as it should restrict access to programs.  He is 91 years old, has small hands and types rapidly with two fingers, but made many mistakes.  Disability is before everything to prevent clikety snap everywhere, because he creates sort of a zillion copies shortcuts of the webpage on his desk, until everything hangs and I have to go a push up on his mess. The same reason applies to the Contorl Panel.  We don't want it to be able to get to the Panel "printers."  When a document will not be printed for a reason, he go, dummy click around and created a bunch of copies of the printer, with a gazillian of documents clogged up in the queue of the coil.  I had to cclear up to 100 documents from the spool on 50 copies printer queue.  It's really an economic problem for his son.

  • How to search for "Mail (32-bit)" (Control Panel) on the Start Menu?

    I would like to be able to hit the Start button and type Mail and then be able to open the Control Panel item «Mail (32-bit)»

    Now when I click on start and type Mail I only search for items in the downloads section, but Panel does not appear. When I open the control panel and tap "Mail", I see the article of mail (32 bit).
    Thank you!

    As an alternative, go to Control Panel , and then change the view by [in the top right] the categories large icons or small iconsview.

    In doing so, the entry of mail will always appear when you open the Control Panel in the future.

    You can, if you wish, just right-click on the mail entry & select Create shortcut.  This is put on your desktop, but you can then move it somewhere else more convenient for you.

  • I can't use a website should I use with Firefox 5.0. So, I need to uninstall and go back to 3.5 or 3.6. Please notify. Also, my control panel blocks from Windows Explorer a PMP. That's why I use Firefox instead. Thanks for any help!

    I can't use a website should I use with Firefox 5.0. So, I need to uninstall and go back to 3.5 or 3.6. Please notify. Also, my control panel blocks from Windows Explorer a PMP. That's why I use Firefox instead. Thanks for any help!

    I thought it would be FAFSA is causing your problem.

    Install Portable Firefox 3.6.x on your hard drive to a Web site. This will not affect any of your current Firefox installation.

    http://PortableApps.com/apps/Internet/firefox_portable/localization#legacy36

  • Photosmart 5515 control panel ok for 2 years. Now in white

    Photosmart 5515 control panel ok for 2 years.  Now in white

    Under warranty?  Almost anything can be fixed, for a price.  No guarantee, I would just buy a new printer, they are quite cheap.

  • How to set the default value for the digital control on front panel?

    How to set a default value for a numeric control of LabVIEW 2009 Front Panel? I have several input values that are actually configuration settings I want to settle with the default values of zero. I want them to be the values displayed when the façade first appears until the code is executed.

    I really want to use the Minimum and Maximum limits by default for this because I still want to be able to define acceptable limits for values.

    I would not be able to specify a default value of zero for these entries?

    Enter the desired value, then "right click...... of default data of value to operations. Save the VI.

Maybe you are looking for