Should be simple

Similar Questions

• Pass a variable to a text entry field in a URL (was: I feel like it should be simple but)

  I think it should be simple, but I'm having a hard time finding how to pass a variable to a text entry field in a URL. I have a text input field ("enter your postal code') and a button that says 'Go '. When the user enters their zip and hit 'Go', I need the postcode, they came to pass in a URL to a new Web site so that they can see the offers in their region. This is a Flash 300 x 250 banner. Can someone help me?

  I can download my FLA somewhere and link to it if needed!

  Click on the frame that contains your go button and your textfield and paste Panel actions:

  go.addEventListener (MouseEvent.CLICK, f);

  function f(e:MouseEvent):void {}

  navigateToURL (new URLRequest ("http://namebrandinsurance.com/auto/newResults.php?zip=" + zip.text + "& submit = submit"));

  }

• Upgrade memory 512 to 2 GB should be simple... not

  I have a Dell dimension 3000.  I've recently updated by the RAM to 2 GB.  At first I kept getting the BSOD.  Then it should start up and I have my icons and online then it will come with an error message that says that your system has recovered from a serious error.  Or in the Middle it starts blinking at the BSOD and say check the BIOS.  I have improved by the bios on the Dell site, but I still get the msg.
   
  The two RAM register in the BIOS 2048 333 mhz memory.

  I reinstalled change them the slots and also got the msg IRQL not less or equal to windows XP.  Then I got one that said page in the non paged area.

  Can someone tell me what is the problem?  Help

  1 person needs an answer

  The problem is obviously the new RAM. Either it's bad or bad memory for your system. I always buy my RAM from Crucial , but even if you don't want to do that you can use their search tool to see that RAM in your computer requires memory. If you already done this (or something similar) and you have good RAM and it is installed correctly, then you can test it.

  I like Memtest86 + www.memtest.org . Of course, you must obtain the program from a working machine. You will download the .iso image file to create a bootable cd. You will need a third-party burning software such as free ImgBurn , Nero or Roxio. Burn as an image, not in the form of data. Then start with the media that you did (you may need to change the boot priority in your BIOS so that the optical drive is the first boot device). The test runs immediately. The test run for an hour or two--at least that errors are seen immediately. If you get any errors, replace the RAM. MS - MVP - Elephant Boy computers - don't panic!

• Should be simple but...

  Hello world

  I'm obviously new to this.  I'm doing a data calculator that takes on a single page and print a calculation on another page using a navigation components.  IE, if the user between 1 and 3, qml, page 1, the program add them and print '4' qml page 2.  The problem is that I can't figure out how to transfer my variable that contains the response of a page to another qml.

  Thanks for any advice.

  Jon

  This should answer your question: http://bbcascadescode.tumblr.com/post/40740528163/stack-of-screens-passing-information-around

• Razor tool should have simple typing anywhere anytime.

  Often, I find feeling awkward CS6, such as some key commands that I use often when editing the timeline. having to move back between modes is ancient history while I feel like I'm cutting on a Moviola.  Clips of cutting on the timeline should be a programmable key that does not need to be chosen first in the "razor" tool This way I have less to look at what I am pressing on and maybe I could assign the letter 'X' to cut through my clips regardless of mode I'm in. Much faster.

  No Rasor just the tool of selection tools:

  CTRL + K: Add edit (be sure the good path is selected).

  CTRL + SHIFT + K: Add edit to all tracks.

• Gutter in 2 pages: should be Simple, but I do not understand

  Hello again and thank you in advance.

  I'm working on a chapter in a book; the chapter is about 30 pages long.

  The size of the page = 8.5 "x 11"

  Margins (all around) is. 5 "

  I have a Master Page (A) that applies to all pages in this chapter.

  There is only 1 column per page.

  I need to put the gutter. 3 "

  (I mean: the space between facing pages)

  I thought that this could easily be done

  by simply selecting the Master Page, and then changing the value of the GUTTER there.

  I chose the Mater Page spread, then opens the Menu layout-> margins and columns.

  Changed the gutter a.3

  (And I didn't click a box that says: "Enable Layout adjustment")

  I've saved the document and looked at my chapter.

  However, the text on the side of the page will there.5 "margin all around.

  But on one of the pages (page 5), the gutter has been settled and the left margin of the text has moved above - we dirait.3 inches.

  What I am doing wrong?

  And why did not all margins near the passage of the gutter on when I made the change on the main Page?

  And why is-page 5 correct and not other pages?

  Thank you very much, once again!

  You have only a text block type so youchecked the text box frame in the master document or added manually to the page format. The 'A' is just tell you that master page was applied.

  The layout should be resizing images aligned to the margin guides. I have, they are not aligned with the guides, they probably won't resize. Resizinb a master image on the master page must resize the image on the page of the document IF # 1, the text is in the main frame (and it would not be for several reasons) and #2, that you have not changed the size on the page of the document which woud disconnect the attributes of the dimension of the binder to the master.

  Whenever you want to make a global change like this, we should do it on the master page, not individual pages.

• F8as2 - should be simple washer / cursor question

  F8as2

  Hi all

  Background:

  I have a slider / washer that works well and witnesses of the timeline of a movieclip back and forth.

  Lets say I have a movieclip of a bulb on stage which begins in a tour out of State.  When the movieclip broadcast the normally I frame based actionscript to turn a movieclip _on bulb.

  The problem:

  When I use the rubbed to go back into the movieclip based actionscript does nothing to activate the movieclip bulb rear _off...

  The Question:

  Can manage actionscript or do I use keyframes with two different graphics to have the light come on _on and _off?

  Thanks for your comments.

  you shouldn't have any problem with actionscript if you rub it in and after a frame that contains the script.  the script should run as long as the image plays.  If you can rub past actionscript code containing frame, the actionscript code will not run.

• Should be simple matter of Shockwave

  Okay, I do long Executive. This should be an easy thing. However, I'm puzzled. Usually, I'm doing application development and haven't played with Shockwave in some time, which might explain it.
  
  All I'm doing is read Real Media in Shockwave files. I read that there are some problems with the actual work on OSX - and I had the experience, so I do the dev on WinXP. Then, I imported a real video file. He plays very well to the Director. I have published in Shockwave and all I get is the real logo. He will not play. I have included the RealMedia Xtra in the movie settings and that you have selected "Download if needed" and "include in projector". I added a button to play the movie - sprite (1) .play () - nothing.
  
  And so, just for fun, I decided to try a QuickTime file. I ended up getting the same results (I even tried the same test with different files in OSX and still not go).
  
  So, someone please tell me what stupid switch, I forgot to go back to allow me to watch video files from a Shockwave animation. Currently all of these tests has just been on my hard drive, so it has nothing to do with bandwidth or anything.
  
  Thank you
  Hardin

  Ah Ah! I knew it was some small oversight. Thanks for reminding me. I guess I'm really Rusty at the shock wave.

• nodes to call groups, should be simple!

  Hiya,

  I am new to invoke nodes from today and I need default reset of a large group of objects at the end of my VI. I don't want to set different invoke nodes for each of them. Can I ask a refnum to a group of objects and how I would do?

  See you soon

  I don't think that there is a way to do exactly what you ask (Group).  However, you can create a table of references and put the reset inside a loop for.

  Lynn

• This should be simple...

  I'm working on a book cover, which is built on the model in the ID provided by the printer. In order to check my design, I create a PDF file and print on paper folding of the cover such that the book would be. The book is 6 x 9 "placed on the upper right of a 14 x 11 with landmarks of the printer model.

  I want to check the coverage of the design on one A4 (which obviously will not allow full propagation) sheet of the ID/PDF and have tried various printing options, but only get the wrong part of the lid.

  If everyone can visualize this, what could I try to do to print just the front (not back) cover of the present sheet oversized?

  Owen,

  Luca

  What I would do is export to PDF, which will automatically open in Acrobat, press C to activate the crop tool, drag around what I want to print, press on enter, then print it out.  Pretty fast once you're used to, I always export to PDF format in my work anyway.

• It should be simple, but I can't remember how

  Hi all
  
  I have an ActiveX control in sprite1 where I will read data continuously to the Director
  
  XC = Sprite (1). XCoord
  YC = Sprite (1). YCoord
  
  
  What I want to do is to put the xc yc numbers one under the other in a member of text field. As the control (continuous data sprite (1) RSS I guess some kind of repeated loop is necessary). Also sometimes the xc and yc correspond to 0. Any idea hwo do this?
  
  Thank you very much for any answer

  do not repeat loop... to put the code in a frame on enterFrame script or create a timeout object or use on low... I'll give you an example of code that uses a timeout object in a script of behavior:

  -fix this script behaviour on the text member that will be displayed
  -the data value of the ActiveX control

  property spriteNum, sp, mem
  dataSprite property

  on beginSprite me
  -create references to the sprite and the
  -Member to which is attached the script
  SP = sprite (spriteNum)
  MEM = sp.member
  -create a reference to the ActiveX Data sprite
  dataSprite = sprite (1)
  -create the object timeout (syntax MX2004)
  -term 30-30 milliseconds, which is roughly
  -How many times the timeout handler is called
  dataTMObj = timeOut () .new ("activeXData", 30, #getDataFromActiveX, me)
  end

  on getDataFromActiveX me
  -Use the method. setContentsAfter() of the text member
  -to display the data of the ActiveX control.
  mem.setContentsAfter (string (dataSprite.XCoord) & RETURN & string (dataSprite.YCoord) & RETURN)
  end

  on endSprite
  If objectP (timeOut ("activeXData")) then timeOut("activeXData").forget)
  dataTMObj = 0
  end

  Note: it's untested code but everything looks syntactically correct.

• gotoAndPlay: why the habit of this work - it should be simple!

  Why does this work:
  
  gotoAndPlay ("CS1_2A");
  
  but this is not:
  
  var destFrame:String = "CS1_2A";
  gotoAndPlay (destFrame);
  

  var destFrame:String = "CS1_2A";
  _root. gotoAndPlay (destFrame);

• Can not do a striaght to a line update - should be simple

  I'm having problems trying to update an existing record in a table - for some reason any, he tries to make an insert (not what I want!) - this is in the meassage of exception, he throws:
  
  RA-01400: cannot insert NULL into ('FOO'. "BAR '." ("' THIS_FIELD")
  Error code: 1400
  
  Which is wrong with the code below? :
  
  UOW UnitOfWork = databaseSession.acquireUnitOfWork ();
  NewFoo foo = new Foo();
  uow.registerNewObject (newFoo);
  
  The ExpressionBuilder builder = new ExpressionBuilder();
  Query ReadObjectQuery = new ReadObjectQuery (Foo.class);
  query.setSelectionCriteria (builder.getField("FOO_REF").equalsIgnoreCase("564561"));
  query.conformResultsInUnitOfWork ();
  
  Foo updateFoo = databaseSession.executeQuery (query) (Foo);
  updateFoo.setStatus ("PENDING");
  UOW.Commit (); Exception thrown here.

  Hello

  You call
  NewFoo foo = new Foo();
  uow.registerNewObject (newFoo);

  then
  UOW.Commit ();

  Everything else is on the databaseSession and unconnected with the UnitOfWork and the transaction. RegisterNewObject will do just that, register the object as if it were a new. In this case, because new Foo() has no identity of the defined object, it is anyway new and would result in an insertion, even if you use RegisterObject() anyway.

  Worse still, you then call
  updateFoo.setStatus ("PENDING");
  who makes changes to the object that you found in the databaseSession - which means that you change the object in the cache.

  If all what you intended to do is change the Foo with a '564561' = foo_ref, read from the uow and directly change it instead:

    UnitOfWork uow = databaseSession.acquireUnitOfWork();
  
    ExpressionBuilder builder = new ExpressionBuilder();
    ReadObjectQuery query = new ReadObjectQuery(Foo.class, builder);
    query.setSelectionCriteria(builder.getField("FOO_REF").equalsIgnoreCase("564561"));
    query.conformResultsInUnitOfWork();
  
    Foo updateFoo = (Foo) uow.executeQuery(query);//objects returned from the UOW are already registered
    updateFoo.setStatus("PENDING");
    uow.commit(); 
  

  Sure, you could read the databasesession and then call uow.registerObject () or registerExistingObject() on it instead to get the work copy inorder to make your changes.

  In addition, if "FOO_REF" has a mapping, you must use.equalsIgnoreCase("564561") instead builder.get("") so that TopLink knows the java field to use to check if the objects are actually still follow in the work unit.

  Best regards
  Chris

• I see firefox 3.6.16 in Applications on my Mac, but the top bar menu dropdown Firefox said I 3.6.10. What should I do to run and use 3.16.3?

  If I see 3 6 16 this means I guess that I downloaded, but the fact that I am not short it means what? That I have not installed? How do I install it now? Should be simple.

  Download a new copy of the Firefox program:

  • Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html
  • Firefox 4.0: http://www.mozilla.com/en-US/firefox/all.html
  • Trash the present application Firefox to do a clean (re-) install
  • Install the new version you downloaded

  Your profile data is stored in the Firefox profile folder, so you will not lose your bookmarks and other personal data.

• Where should I start with RS-232 to receive and analyze multiple signals using a single port?

  Hello

  I'm starting a new project that will have a single serial port.  I would use Labview to analyze several singles (which include two measures of temperature, two measures of pressure and a few others like two voltages, input encoder axis, etc...).

  Where should I start?  I understand RS - 232, well enough, but not too familiar with Labview.  How do I separate the entrance to separate multiple entries?

  Thank you all in advance for any help you provide.

  It is unclear what kind of separator you use between the label and the data, but if this isn't a CR, then the sequential readings should be simple enough. A VISA reading can be set to complete on a character of specific endpoint (i.e. CR) so the Read VISA would be in a constant loop then you would look on the label and if each is unique, a simple case statement could be used to assign the value to a specific indicator/table/shift register / whatever you use to display/store data.