Should I create a separate on RHEL/tmp partition?

Similar Questions

• I created a separate administrator account and can't get it to appear at startup.  I need to send my Macbook repair and need this ID to show when they turn on him. How do I do that?

  I created a separate administrator account and can't get it to appear at startup.  I need to send my Macbook repair and need this ID to show when they turn on him. How do I do that?

  If you added via the preferences system/users and groups, it should appear as a long time that you have set the display of connection to appear. To do this, go to System Preferences/security and privacy. Then check the check box turn off automatic connection . This should show the login screen at startup. You may need to click the lock (lower-left) icon to unlock the setting to check it out.

  

• multiple bitrate encoding creates 3 separate events and streams instead of a single event.

  I use the device continuously of Niagara 4100 to encode a live multiple bitrate for an event flow. The problem is the Niagara encoder does not allow me to attach an event name in the stream url like - ' %i streamevent? ADBE-live-event = liveevent', instead, it allows only "streamevent %i. So in the end, I get three separate events with a feed for each event.

  As follows:

  Example:

  /Events/streamevent1/MNMMNNMxxxxx.stream

  /Events/streamevent2/MNMMNNMxxxxx.stream

  /Events/streamevent3/MNMMNNMxxxxx.stream

  AND

  / Stream/streamevent1/files...

  / Stream/streamevent2/files...

  / Stream/streamevent3/files...

  Is it possible to run this way without using the parameter 'adbe-live-event' using the .f4m manifest file?

  Thank you

  Dave
  

  
  

  There are a workaroud but you can try to use Flash Media Live Encoder, which is a free tool for best results. Surf to-C:\FMSHOME\samples\applications\livepkgr directory and you will find a file main.asc in there. This is the file that is attached to the request for livepkgr of script on the server side.

  In this, change the variable var liveEventName and set it to the event you want to attach your workflow to eg - 'liveevent '.

  Now, create a separate copy of your request to livepkgr inside the C:\FMSHOME\applications\ as livepkgr_mbr and replace the file main.far with the main.asc you just edited. Now all in edition, connect to the livepkgr_mbr application and simply specify the name of the stream - livestream % i. verify your permissions before you start recording.

  This should work for you. But remember that this will make all your streams to be associated with the event - liveevent like you're hard coding in the main.asc file. So its best to keep a separate application just for that purpose.

• How can I create a separate address book? I'm not on a mailing list but an address book where addresses are not mixed with my usual address b

  How can I create a separate address book? I'm not on a mailing list but an address book where addresses are not mixed with my address book regularly. I already have three created for me by Thunderbird address books. Add all new addresses to one of those, I'm not afraid to remove the other address books, because some of their addresses are not repeated in my address book "main". So if I delete all the names in one of the existing books, I need to create a blank book that will not mix the addresses with those of an another address book. HOW CAN I CREATE AN ADDRESS BOOK EMPTY? I want to be able to create multiple mailing LISTS using the addresses in this new book, I will eventually have an address book special with a variety of mailing lists, that I can use as I want to.

  In the address book, file | New | Address book.

  No menu showing "file"? F10 or ALT.

• Should I create pagefile on ramdisk with my new SSD?

  Hello

  Got my new SSD which is the only drive in my system now. To avoid the heavy writing on this drive, I bought Superspeed Ramdisk more (IE temporary files etc.). I have Windows Vista Business 32-bit with 4 GB of ram. The Ramdisk software is able to use the ram 512-1024 that Vista cannot use. In addition, this software can serialize the contents of ramdisk so that it IS possible to run the file here.

  I only use this portable desktop so I'm never near max on virtual memory.

  So, should I create my swap file on a virtual disk? And if so, it would be enough with 512 MB pagefile? Vista will allow me to set this parameter or create the pagefile on my boot drive, regardless of my settings?

  EDIT: Just for clarification and the difference of this thread and 1000 others, my concern here is the constant of writing in the pagefile on my SSD. Not the small gain (if any) the pagefile in Ram would produce...

  --

  SSD? Nice.

  I try and run the pagefile from the Ramdisk to be tested, according to your needs, you may have to go to the EHR.  However, you should have the system handle it anyway.  You can change it, but for now, since the system is new with lots of RAM, test how the virtual disk swap file works if this does not work for you.  You can still use the standard configuration with the swap file managed by the system on the disk.

  Unfortunately I am not too familiar with the Ramdisk software and good course:

  WARNING OF THIRD PARTY SOFTWARE

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Edgar
  Microsoft technical support engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Run as administrator password install mozilla or other programs. you don't need to remember any password I should have created

  password title: administrator of the original.
  Run as the current user or administrator password, appears when I try to install mozilla or other programs. you don't have to remember any password I should have created. y at - it is not its place in my pc. can I bypass or turn this feature, for example in the bios or something? Please help me, thanks. Stig

  Hello

  1. you are on a domain network?
  2. you are an administrator of this computer?
  3. What is the exact error message?

  Answer for you help the better.

  You can check the items listed below:

  Suggestions for a question on the help forums
  http://support.Microsoft.com/kb/555375

  Microsoft's strategy concerning lost or forgotten passwords:

  http://support.Microsoft.com/kb/189126

• My question is: is there an approach appropriate to where and how files should be created and arranged, except directly in your main drive, in my case C:?

  I recently had a hard drive replaced requiring a new installation of Windows 7. When I went to get the system in place, the guy who set up Windows told me that he created the user directory specifically in a way so that new files to be created in a Documents folder that was created under the username. At least that's what, in my view, said.

  In any case, I always create new folders and their subfolders under Local C: drive.  My question is: is there an approach appropriate to where and how files should be created and arranged, except directly in your main drive, in my case C:? Thank you for your help.

  Windows 7 has been designed with the intention that user folders and files will be store in one of the folders under the users, that is to say the Documents, photos, etc.

  It is not recommended to store in the root, i.e. C:\ directory.

  If you have any other disks or partitions, you can store what you want there.

• where should I create file?

  Hello

  my application must create a file at the beginning. I am way wondering - which should I use to create a file? No each device has a memory card. y at - it smth like 'C', for example:

  _fc = (FileConnection)
  Connector.Open ("C:\" + _fileName, Connector.READ_WRITE);

  or where should I create TI-so that it won't be a problem on any device?

  Kind regards

  misty83 wrote:

  where can we establish a TI-so that it won't be a problem on any device?

  You can check by program if the external memory (SDCard) device.

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800332/1295814/How_To...

  If the device is not external memory, you can save your file in the internal memory.

  In this case, make sure that the device has available for saving this file space. You will get this information from class MemoryStats.

  To save the file in SDCard use something like:

  FileConnection fc = (FileConnection) Connector.open(System.getProperty("file:///SDCard/"+"fileName.txt"),Connector.READ_WRITE);
  
  if(!fc.exists()){  fc.create();}OutputStream os =fc.openOutputStream();os.write("Test");os.close(); fc.close()
  

  Also check this link for more information on the file path.

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800332/800620/What_Is...

  Concerning

  Bika

• What better union all or create a separate slider

  Hi gurus

  I wonder if someone can help out me of this union is a good option, or create a separate slider for each union all is a good option. Which is preferable? Thanks in advance

  Concerning

  Shu

  You can use Union all instead of opening cursor much time to record the line and your code in the treatment of the sliders, exceptions.

  So it would be better to consider all the data at once and even within a single processing loop.

  Kind regards

  Prashant da Silva

• Which product should I create a PDF file that I can put on my website for people to sign?

  Which product should I create a PDF file that I can put on my website for people to sign?

  Hi pattiw97437213,

  You can create interactive PDF forms using Acrobat DC & then post it on the Web site.

  See Help below links for reference: -.

  • Acrobat help. Publication of Web interactive PDF forms
  • Use the Acrobat forms and Web form data

  Kind regards
  Nicos

• A pdf with two images page. How can I create a separate pdf for each image?

  I was sent a scan of two images using Adobe Acrobat DC A4.  The images are invoices.  I want to create two separate pdfs, one for each Bill, so that I can drop off each invoice with the operation seen in my accounting software.  If possible, please let me know how to go on this issue. Thank you.

  If the two images are on the same page: duplicate page (drag / move in the Pages panel while holding the Ctrl key).

  Then crops the first page to only show that the first Bill and the second page to show only the other. Then extract each page as a new file.

  If the image is on a separate page: extract each page as a new file (via Tools - Pages - extract Pages).

• How can I create a separate page in the menu bar?

  How can I create a separate page in the menu bar?

  I want to create a page that does not contain the bar, other pages, and I don't want other pages to include this new page in their menu bars.

  I want to create a different page (s) completely independent in an existing menu bar and maybe add it's own menu bar...

  Is there a way to do it?

  Yes, you can right click the page you want to have separate and select "exclude of the Menu.

• My serial number is not accepted, how (my card says: ActivationCode, should I have a separate serial number?)

  My serial number is not accepted, how (my card says: ActivationCode, should I have a separate serial number?)

  Hello Rob,

  There is no serial number for CC products. Sign in to your account on the website, download the Cloud creative application, install it and connect, then install the software.

  Log, activation, or connection errors. CS5.5 and later, Acrobat DC

  In addition, you can also check the help below document:

  Creative Cloud applications ask for serial number

  Let us know if this helps answer your question

  Have a great day,

  Sofian

• Offset path does not create a separate path

  CS6 Mac

  Looks like my Illustrator is listening outside. When I apply offset path of the compound object, Illustrator does not create a separate path for me, but both the offset and original sort to group together:

  https://www.dropbox.com/s/xiu3xqcictx0ku0/Offset_problem_1.PNG

  I am trying to create an effect like this tutorial on youtube. But as the offset path does not create a separate path, I can't duplicate the same effect.

  No idea on how to solve this problem would be appreciated.

  Did you use the object > path or effect > path? Here is the difference

  

• Where is 'Create a separate record for each volume' past? in VMware-converter - 4.0.1 - 161434.

  Where is 'Create a separate record for each volume' past? in VMware-converter - 4.0.1 - 161434 (independent). Option is not more than 4 converter?

  Hello.

  When you get to the third tab called "View/Edit Options", choose the Edit option for 'Data to copy.'  Then choose the option advanced at the end of the menu "data copy type" and then use the options on the page layout tab target to assign separate discs.

  Good luck!