Should we start to worry or not?

Similar Questions

• Hi, I dropped my iphone6 in a salt water pool and was overwhelmed for only 3 to 5 seconds. I quickly ran upstairs to put it in rice and it was 2 days ago. Should I start charging or always keep rice?

  Hi, I dropped my iphone6 in a salt water pool and was overwhelmed for only 3 to 5 seconds. I quickly ran upstairs to put it in rice and it was 2 days ago. Should I start charging or always keep rice?

  Take your iPhone at the Apple Store as soon as possible. Unfortunately, warranty does not cover water damage. I'm afraid that your device is already damaged, but only professional can tell you this for sure. Take the sooner you it to the store - the best chance, it can be recovered.

• Where should I start with RS-232 to receive and analyze multiple signals using a single port?

  Hello

  I'm starting a new project that will have a single serial port.  I would use Labview to analyze several singles (which include two measures of temperature, two measures of pressure and a few others like two voltages, input encoder axis, etc...).

  Where should I start?  I understand RS - 232, well enough, but not too familiar with Labview.  How do I separate the entrance to separate multiple entries?

  Thank you all in advance for any help you provide.

  It is unclear what kind of separator you use between the label and the data, but if this isn't a CR, then the sequential readings should be simple enough. A VISA reading can be set to complete on a character of specific endpoint (i.e. CR) so the Read VISA would be in a constant loop then you would look on the label and if each is unique, a simple case statement could be used to assign the value to a specific indicator/table/shift register / whatever you use to display/store data.

• Four updates (KB 2492386; 2515325; 2522422 982018) seem to settle down and complete the process at shutdown; However, at the start that they are not installed - Win7 64 + SP1

  Four updates (KB 2492386; 2515325; 2522422 982018) seem to settle down and complete the process at shutdown; However, at the start that they are not installed - Win7 64 + SP1.  Tried again several times since last week.

  BillBlackstone,

  KB982018 should be installed last, separately from other

  Install the 3 other updates manually

  Restart

  Back to updates of Windows and install KB982018

  Restart

  05/02 / 1108:16: 57 pm

• Lilbra5 question game "game cannot be started because there is not enough disk space to run memory or hard drive."

  I installed a CD for an expansion set. But when I try to play, I get a message that says "game cannot be started because there is not enough disk space to run memory or hard drive." What should I do?

  Thanks Lilbra5

  Hello

  try to do a right click on it and run as administrator

• Asked that question this morning but now cannot locate the issue. Where should I start looking?

  Original title: my question

  I asked a question this morning but now cannot locate the issue.  Where should I start looking?

  Thank you

  Kate

  According to your profile:
  http://answers.Microsoft.com/en-us/profile/09e3ff13-0096-4DA0-89fd-5ce723c7181e

  You asked a question ~ 6 minutes after you registered to use the forums.

  Message: ' Catalyst Control Center: the application host - the host application has stopped working. "
  [This is a link to the question...  Click on it].

  Essentially, it seems that in your message subject and body in this issue, you must download and install the latest version of the device for your AMD AMD video card driver.  It is an AMD problem, not a problem with Microsoft.

  However, since you have not given the brand & model of your computer or video card / the device in question - the best you can do is point you to where AMD is an application that allows you to scan and find the latest device driver and catalyst for your video card device software.

  http://support.AMD.com/en-us/download/auto-detect-tool

  Good luck!

  More information in the actual conversation:
  Message: ' Catalyst Control Center: the application host - the host application has stopped working. "

• I need to start using the color correction. Should I start by Lumetri, or go directly to SpeedGrade and save time?

  I need to start using the color correction. Should I start by Lumetri, or go directly to SpeedGrade and save time?

  Lumetri Panel/workspace in PrPro is designed as a quick Fixer & able to mainly simple elements you may need to. And it has some limitations so built-in types experienced low editor/colorist can't screw up at all times of their videos. If this tool has everything you need, so it is very convenient. You do not need to learn a lot of ranking 'thought process', just look at your scopes & your program monitor.

  If, however, you'll need to tell secondaries 'Key' on some shades at certain levels of brightness/saturation to change just THE color, hue, brightness, saturation data, or a number of other things more important to the image, then SpeedGrade would be necessary. For me, I use the Lumetri Panel on the simple things, but... as Jim pointed out, if I want to hit secondary or make major changes, I'm more the Sg. Because after I learned that the app rather... unique... minimalist... UI, I'm actually able to move quicker on things over there than in the Lumetri Panel.

  SpeedGrade is not the same as applications other colorist/ranking, didn't say the vast-toolset of determination... but link Direct saves a TON to prepare sequences & projects on XML/EDL out and return & tel. If you go to work with her, I suggest strongly to e-book by Alexis Van Hurkman "Adobe SpeedGrade."... Getting started» It is still CS6... BUT... It covers quickly and directly how SpeedGrade works and how to do things you want to do, better than anything else I've seen. The big change is in the CC versions using the Direct link that you don't have any EDL input/output, and as all the scenario changes you make through PrPro, both the chronology controllling/replacement parts of Sg is grayed out in a project of direct link (directly using a project file PrPro). The interface... different color... is almost identical to the versions CS6.

  In addition, there are some good programs on service tutorial lynda-dot-com, and some that are quite useful on SpeedGrade in AdobeTV that will give you the look more recent Sg and Di-link process. Maybe you spend a few hours in watching & playing around, but once you get this thing is pretty easy to use.

  I do not recommend having a ramp... a block of neutral gray tones will generally from left to right black (0) to white (100) that you can put on a timeline, see to the Sg, and then look at what is happening where when you change what... so that you get a feel for say overall "initial" three color wheels/luma sliders , which left elevator control, controls gain way Gamma and right hand do... and you need to see that the elevator is * not * the shadows... and then, when you change moves on the shadows, mediums and highlights and always looking three combos of luma/color controls, now what region they change? What control on how these controls affect the image data pivot controls provide?

  It sounds more complicated than it needs to use, really... you just can't guess what they are doing and being puzzled at the first/frustrated when things do not respond as you expect. A few graphics and several simple explanations & examples... and you'll be off and running.

  Neil

• How can I download CS4 on my laptop if I don't have the serial number? Where should I start?

  How to download Photoshop CS4 on my laptop if I don't have the serial number? Where should I start?

  Download and Installation Help-

  https://helpx.Adobe.com/download-install.html

  CS4 - http://helpx.adobe.com/creative-suite/kb/cs4-product-downloads.html

  You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  CS3 and CS4: http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html

• SQLFire: Failed to start and then can not close-"Access denied" & "could not start the"sqlfire"database

  I ask a question, expanding to another thread 'http://communities.vmware.com/message/1884835', on the start-up and stop SQLFire.

  My topography has four servers, two locators, and two servers (Server 2 SQLFire each) on which the database is deployed.  When you start the batch, without no history running, all right.  Adding and removing servers in the cluster, also seems to work very well.  However, when the whole of the system, its stopped by sqlf shut-down-all, it starts up, things go wrong.

  I met the same problem described by the called thread, that is, it seems to be an addiction to data - which is not resolved.  I start locators first, one at a time.  When one starts, data dependence becomes apparent.  The Locator seems to start, but the sequence goes in a loop around the data dependence.  When you try to stop the same Locator, he returned in a "stopping" State, where it does not recover.  Try a reboot, translated by [A SQLFire Locator works already in the directory "C:\SQLFire\Locator"].  The "stoppage of sqlf Locator", producing a further: "timeout for SQLFire Locator at the stop, the status is: SQLFire Locator pid: 4956 status: stop ' results; and the "sql shut-down-all:, throws a long error that includes:" java.io.FileNotFoundException: shut_down_all.log (access is denied) "and 'Could not start the 'sqlfire' database'. '.  Both of these appear to be the crux of the matter.

  I don't know what data it is dependent, because I haven't added all the data that will be persisted.  However, the system starts with default records.  I tried to check if these default disks are required, which seem not to be and I'm leaving for the partition and replication information, to read when the system starts / begins.  I can't understand why locators cannot start without the database, without any dependence on the data, and also why the system seems to require a sequence to start.  Is that not the purpose of SQLFire, i.e. a solution supporting the cross, which can be started in any sequence of old?  If an operator needs to get this bad, for a production system, should be that the entire solution be recharged from external sources, and that could take awhile.  It would seem, once the system in this state, i.e. the dog chasing its tail, he doesn't get, and I have to delete all the bookmarks and servers and launch all to reboot from external data sources.

  I'll be dilly, or is it a problem in general, experienced by others?

  I would be grateful for any comments, and if you could indicate the respective documentation, as I struggle to establish a correlation between the problems of documentation, even Google hits, when it encounters any problems with SQLFire.

  I appreciate your time and efforts.

  Hello

  I checked the docs and they are not accurate on information in Windows when using the cmd shell. The ampersand does not work correctly when called from a shell, Cygwin, or on UNIX/POSIX systems. Will get corrected.

  Please, use the start command to start in the background of a single command window / batch script:

  beginning of "locator" cmd /c sqlf locator...

  beginning of "server1" cmd /c sqlf server...

  etc.

  Add option/min to start the minimized for example windows cmd start 'locator' / min cmd /c sqlf locator beginning...

  Or launch each 'start-up of the sqlf Locator', 'sqlf-start server' etc to separate windows command prompt.

  Thank you

  Felicia

  Post edited by: SumedhWale

• I'm looking to get a new computer.  Where should I start or how can I do to get all my current products, plugins and software on the new computer?  I currently have 5 Lightroom and CS 5.

  I am looking to update my computer in the next few weeks and was wondering how to make the transition of all software (CS5 and LR), plugins and Setup on the new computer.  I have specific plugins that I bought for PS and Magic Bullet Looks for AE.  I was also wondering what I have to do with LR.  I almost 750Go of media on a raid drive on what will be the old computer.  The majority of my media is stored on a disk external segate so that used that big of a problem.  What I was going to do with your old computer is to add a few extra hard drives searched the home and do a system drive.

  Where should I start and what other issues should I have?

  Thanks in advance!

  Mark

  A lot of times depends on what operating system you are using (Windows, OSX etc.) and if you want to keep all your data from your old computer or only parts of adobe.

  The perfect way to do it would be to do what we called a metal backup naked using software such as shadow protect and then install the image it creates on your new system. With this method you keep everything and just change material making sure all your settings are always the same and be able to continue as if you had not changed the whole computer. The only difference you'd see is a strong increase in speed.

  If you like me to explain something more please pm me or contact me on my site to the: http://viesystems.co.uk

• A Web site can start in the footer, so you should have start scrolling upwards instead of downwards?

  A Web site can start in the footer, so you should have start scrolling upwards instead of downwards?

  Hi Jorge,.

  I'm afraid that, out of the box, is not possible. You will need some custom scripts to achieve this. You can create an anchor to point out where you want to start and then to simulate a click to the anchor via the use of JavaScript in charge.

  - Abhishek Maurya

• Firefox does not start and a cautionary note saying (ddl c:\program files\mozilla firefox \xul.ddl) is a problem, what can I do, thanks

  Firefox sometimes refuses to start and a cautionary note saying (ddl c:\program files\mozilla firefox \xul.ddl) is a problem, I restart the computer 2 - 3 times and he eventually found. Can someone tell me what the problem

  Thanks Bob

  Hello
  Some Firefox problems can be solved by performing a clean reinstall. This means that you delete your Firefox program files, and then reinstall Firefox. This process does not delete your Firefox profile (such as bookmarks and passwords) data, since this information is stored in a different location.

  To do a clean reinstall of Firefox, follow these steps: Note: you can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from mozilla.org office (or choose the download for your operating system and language on this page) and save the file to install it on your computer.
  2. Once the download is complete, close all Firefox Windows (or open the Firefox menu

     

     Click the close button

     

     ).

  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  More information on the resettlement of Firefox can be found here.

  WARNING: Do not use an uninstaller to third parties as part of this process. This could permanently delete your Firefox profile data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and passwords saved. They can be retrieved easily unless they have been backed up on an external device! See back up and restore the information contained in the profiles of Firefox.

  Please report to say if this helped you!

  Thank you.

• I reformatted my Macbook Pro (13', mid-2012). I want to use Boot Camp to create a partition for use Win 7 I had previously and have drives. Then go to Win 10. Where should I start?

  I reformatted my Macbook Pro (13', mid-2012). I want to use Boot Camp to create a partition for the use of Win 7, I had previously, and have records. Then go to Win 10. Where should I start?

  You can start here

  Use Bootcamp to install Windows

• HP Envy23: Start Menu button does not work

  The Start Menu button has suddenly become unusable. The Home icon has been replaced by a sheet with the icon corner folded, and in a hurry, I get a message saying "the drive or network connection that designates the shortcut"Start Menu.Ink"is not available." Tried a couple of these corrections online and made sure everything is up to date.  Everything works well, except for this menu. Any suggestions?

  Hi there @Quetzle53
  
  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that the start menu works correctly for you. I'm happy to help you with this.

  If this just started to happen, it may be a good idea to start with a system restore, if possible. See the following link Microsoft showing the various recovery options in Windows 10, including system restore.

  Recovery in Windows 10 options - windows.microsoft.com

  First try restoring, and then if it does not give a shot with the System File Checker. The following link is a very complete description of this command and how to use it. The command SFC - run in Windows 10 - tenforums.com

  Afterwords to test and see if the normal is restored. If this isn't the case, then try the reset method described in my first link.

  Let me know if it works for you. If so please mark this message as a solution. If this is not the case, let me know any other details that you can, for example, error messages or other symptoms that you notice.

• I want to learn to make applications for iOs. Where should I start?

  Hello. I want to learn to make applications for iOs. Where should I start?

  The following may help: https://developer.apple.com/library/ios/referencelibrary/GettingStarted/Developi OSAppsSwift /