should we the proc license and user license?

Similar Questions

• Whenever I update "send/receive" a message asking me to write the network password and user name.

  I am connected to wifi in the hotel (Orange) and I can't SEND email, I just have to receive them.

  Whenever I update "send/receive" a message asking me to write the network password and user name. This from my mail server (not orange because that one is ok I have access to the internet).

  Most of the suppliers do not let you send if you are not connected through them, or they have special settings.  So for now, see if you can access your e-mail via webmail and use this interface and in the future, contact your ISP and ask them if there is a way to send emails when you are connected through a different network.

  Steve

• How to read the Drwtsn32.log and user.dmp files

  I'll have the blues of the blue screen and need to read these files to help me find the problem.

  I found the problem

  NVIDIA GeForce4 MX 420 with AGP8X

  as he tried to update last update driver was, but wouldn't Toad. I'm incotact with the support of tec awaiting a response

  Thank you for answer

• Registry Booster Uniblue says I have total of 928 errors on the registry system and users!

  PC seems to work (maybe slow sometimes). Purchase of Registry Booster and system Twecker will really make a difference? ALTERNATIVES?

  How normal is that after four years of use of the lamp?

  You must ignore the report and uninstall Registry Booster.

  RegistryCleaners of the negligible benefits and can create errors intractable system that cannot be resolved by reinstalling the operating system and everything that this implies.

• Where can I find the Windows password and user name information

  I download a new system from my computer and everything was going well until they asked my Windows username and password. I do not remember, and I can't find. Can you get it someone please let me know where I should look... Thank you

  Hello, dreamcatcher16

  Please use the Forum for answers!

  You upgrade to Windows Vista or Windows 7?

  You can get your username by going to C:\Users\ and find your user name under Windows Vista and C:\Documents and Settings\ for Windows XP.

  We are unable to provide assistance with respect to the recovery of a password.

  If you are able to connect to your machine and have administrator rights, you can then change your password by clicking on start, right-click on computer and choose manage. Open the users section and groups, then users, right click on your account and choose set password.

  I hope this helps.

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• bean, containing the business logic and user interface components

  Hello experts design ADF, please guide me.   I came across a critical design aspects.  I have the homepage with a lot of UI, region 1, region 2 components. I bind the components of the user interface of the page at a session scope managed bean and is the reason why, when control passes to the region 1 or region 2, I'm going to do a lot of processing logic and then on that basis, I have to update the page user interface components.   Same thing with region 2 also.  And then I should be able to access the information in all regions and also through other components of interface user etc.

  I see only the scope session bean can help me here to get my tasks in all regions and in all the other components of the interface user to the page because I'm not able to spend too many parameters in all regions.     Now the problem is, I can't serialize this bean because as I've mentioned a lot of user interface components are updated based on logic.

  If I do not serialize the bean, I might have a problem in the future when the application must be deployed to the cluster envt.

  I don't know how can I go with my design now.   Please give me ideas, brilliant and very grateful for your advice.

  Thank you

  Hello

  I did not follow the entire thread, but this last message, I can tell that you are not using ADF how it should be used. So let me address two issues

  1. I use data controls generated on methods of bean managed my areas (workflow).

  If you create a POJO data control that you configured as controlled beans then this will be two instances (separated) from the same Java class. This means that they do not share anything. The only option to share state between a managed bean and a data control is if you would have the data dynamically control bean up the bean managed using the language of Expression of the 8which then however creates a dependency between the DC and the bean - however, there are use cases like that)

  2 activation / deactivation of the buttons in the parent view of a region

  This can be done using bean-injection, which is a bean managed in extended view defined on the parent view that you pass as parameter for the workflow. See: http://www.oracle.com/technetwork/issue-archive/2013/13-may/o33adf-1920483.html

  As said, I haven't read the entire thread, but want to point out that there is enough information in writing (product documentation) and video (Insider ADF - who teach the development of SFM practices http://www.oracle.com/technetwork/developer-tools/adf/learnmore/adfinsider-093342.html take the time to review this)

  Frank

• Implementation of the account administrator and user

  How to implement this feature in a merger application 11 adf.
  I have a login with user name and password screen I enter the user name that is be an administrator as he has privileges to change all tables
  . (I go to the next page in the workflow setting a global variable (admin = true) ;)
  and now I have to let all the refreshable tables, but what should I do if the user is not an administrator, I would like to make all the columns in the tables read only but one. How can I do this?
  Are all these design patterns for this. How you implement the administrator and the single user or user with privileges in your application.
  Thank you

  Most of us use ADF application security as described here:
  http://wiki.Oracle.com/page/ADF+security

  The first four links are all videos.

  When you've got ADF security is ready, you can make this column to be read-only with a simple EL on the read-only atributte like this:
  #{securityContext.userInRole ['USER']}

  This will make the column read-only for all users.

  Renan

• I "chose to open Firefox Setup 5.0.1.exe" and saved the file but nothing happens, my version has not been updated, I don't know what should be the next step and I would appreciate help with this question.

  I tried to do this several times over several days, on a HP a1620n running Windows XP Media Edition, Version 5.1. Nothing happens after that I get the full download message. Thank you.

  In its current edition, click on Tools, go to modules, then Extensions and remove "Ask Toolbar".

  Close and then restart Firefox and go to help | Look for the updates. The update should automatically start.

• Satellite M100-184: English-how to get the restore CD and user manual

  Hello guys,.

  (1) how can I get an English version of my laptop recovery CD? The one I have is written in Spanish and I am not able to follow the procedures as I didn't undrstand of Spanish language.

  (2) Furthermore, how can I get an English version of the operating manual for my laptop?

  I need you guys to help me more urgent as possible.

  The portable _My details are as follows: _
  Model name: SATELLITE M100 - 184
  Model No.: PSMA00E - 03Y01WSP

  Best regards
  Uche

  Hello

  (1) the recovery CD can be ordered only in the same language as the country where the phone was purchased.

  2) of the user manual are in different languages European Toshiba support page:
  http://EU.computers.Toshiba-Europe.com-> download-> Toshiba operating manual & support

  Good bye

• Windows 7, last user in the login screen and 'User', losses other accounts in the login page

  I am running Windows 7, it was a new installation. Since I set up my machine, I created 3 accounts in my system and in the login page I always had the possibility to choose one of these accounts.

  1 user 2 3

  Since last weekend, when I try to change username, I have just the last user who was logged and a "Different user" option (no image that it incidentally) where I need to type the name of the user who wants to go to and the password.

  Last known--> if another user select this--> I need to type the user name and password for the user newactive

  How to restore the possibility of having all my 3 available users in the form of connection with their photos?

  Thank you!!!

  I would like to use system restore to set up Windows in three days.

• Cannot open files or accessory by double-clicking, should use the right click and select 'Open' to see all attachments or open any document/photo/etc.

  I have all of a sudden, am more able to open anything in my library or by email by double left click on the item.  Now... I have to either save and open by selecting open or simply I am unable to use my computer to see anything which requires the opening.

  What is everything?  How to fix?

  There was a similar... in fact same post in Windows 8... but nobody will suggest reasonable fixes...

  Thanks if you can help...

  Right click, choose 'Open with', and then choose by default, which will fix it so that when you double-click on it uses the one you have chosen.

• Operations of the large pool and user sessions

  DB version: 10.2.0.4
  
  I noticed performance of RMAN being increased after you set a higher value for the LARGE_POOL. But a top LARGE_POOL would increase the performance of the transactions of the user sessions with high memory needs?

  increase in the SGA of 8192 to 10240

• Smartphones blackBerry is RIM read these messages? Where should I post the bug reports and suggestions for BB8900?

  I wonder where I should post the bug reports and suggestions for BB8900? I think that we have already found several bugs enjoyable device it is, but I've never seen any work email address to send these discoveries. I have also some proposals to improve the BB8900 features, making it even more attractive with minimal effort. We can actually open a new thread here and I can start posting bugs that I knew, but I'm not sure that everyone from RIM never reads these postings. All good ideas? Or maybe there is some forum tht could be used for this purpose?

  If you have any suggestions and information on RIM BlackBerry platform then post it here:

  http://supportforums.BlackBerry.com/Rim/Board?Board.ID=PM_Dev_Board

• installation of updates from windows to windows 7 after 10/25/10 makes me lose all access to the internet (wireless and others)

  I have r530i samsung that is less than 8 weeks, after that 1 week, a new set of windows udates appeared which caused my Internet to lose. I spoke to my internet provider, between us, we confirmed there was nothing wrong with the connection or otherwise (I was able to access the internet from another PC using the same provider and user name) it was suggesteed downloads had done something for my wirless modem.

  I did a complete system restore and it worked just fine.

  a few weeks later, the same problem occurred after some updates of windows. Unfortunately the fault can be diagnosed because I can't access the internet? I did a full recharge of the system of 23/10/10, this has worked fine, windows then downloaded updates and my internet access has failed once again so I have disabled the automatic updates and everything seems fine.

  all connections work well, I can still see the home hub it won't let me access the help please

  Hello

  There are various reasons for internet connection doesn't work after installing the update of windows on the computer.

  First of all, I would say that you check the update is causing the problem.

  To see the updates are installed on your computer

   

  (a) open the updates installed by clicking the Start button, click Control Panel, clicking programs, and then r undeprograms and features, click view installed updates.

  Once you know the update's KB number then visit the Microsoft Download and put the number in the search box, download and install the update manually after placing the computer in a clean boot state.

  http://www.Microsoft.com/downloads/en/default.aspx

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How do set you the time, date and month on the HP Officejet Pro 8600 more

  How do you set the month, Date and time on the Officejet Pro 8600 more?

  Hello

  The screen of the device press setup and go to prefferances, and then press ok. There you should see the option "time and date". You can set it from there.