Show incorrect answers after review

Similar Questions

• Do not advance after incorrect answer quiz (quiz uses the user variables to show the wrong answers)

  Hi all

  Long time lurker, first time poster. I hope someone can help me.

  After watching this excellent video about adobe captivate blog "so what were the right answers in any case" I created a quiz with user variables and conditional early action. It displays a red x next to each question answered correctly at the end of the quiz.

  • I created the variable user for each question to a value of 0. On an incorrect answer, the variable would be set to 1.
  • At the end of the quiz is a blade that question and shows a red cross next to each question with a variable set to 1. uses conditional action that is triggered 'upon entry.

  It works, but my problem is when I saw the quiz (in the browser or SWF), on an incorrect answer, the legend of the failure appears but does not really advance the question when I click anywhere or press o. It works well on the correct answers.

  Can I sovle this by adding a next button, but I'd like to understand what I'm doing wrong.

  • Using captivate 6.0.1.240 (copy in box)
  • Windows 7
  • images on the quiz properties and conditional action below

  Any help appreciated.

  Concerning

  Jacob C

  

  

  I tested this workflow on 6.1.319 and it works fine. If a little guess in the wild... No 6.0.1.240 around at the moment. Seems strange, because a simple action like your Assign action should normally release the read head. But of course, it's a question slide and they do not always behave as expected. Could you try to replace the action of the beneficiary by a standard tip with 2 statements, like this action:

  • Assign the var_question_1 with 1
  • Continue

  And please, let me know if it works? This could be a difference between the two versions, but not sure at all.

  Lilybiri

• 9 - Hotspots - poor user experience have to click TWICE to clear an incorrect answer of Captivate

  9 - hot spots using Captivate

  When you select an incorrect answer (the user clicks on the wrong place of the screen) the user goes into a loop of terrible. It is a function unsuable.

  What is happening

  The bad hotspot is clicked

  Submitting hits

  Try again, a message

  You wait until they are able to do.

  If they click anywhere else now, more in addition to hot spots appear (there is no limit), one bad cannot be erased.

  If I create a new slide with a clear"" key.

  user hits bad hotspot and after presentation Gets the error message

  Clear hits

  It clears the message, the hotspot evil remains

  Surely the hotspot should also go

  To get rid of the wrong answer, they must strike clear again

  (by the way they could create hundreds of attempts if they want here)

  Terrible user experience.

  OK, I entirely agree with you on the usability of the issues of access point by default, not only for the reason that you MENTION, but for many more. It is also never possible to add a button shape on a matter of hot spot, because the whole issue can be clicked, everything can be an access point. Which means that if the user clicks the form button (I often offers to provide assistance or information on the issue as the score for this question, or the total of points already earned) which will be counted as a bad hotspot click.

• Unable to resume the quiz after reviewing (Captivate 7)

  I want the ability to resume the quiz and read it again. If I fail the quiz on the first attempt, both review and complete recovery buttons. However, if I first review quiz and make it back to the results page, the recovery test button is gone.

  Is there a way can I fix? I can't find anything in the quiz preferences that would indicate the recovery button disappear after reviewing the quiz.

  No, the way as Captivate Quiz is designed, as soon as you use review, the possibilities of recovery have disappeared. As they say 'by design '.

  If you stay with issues by default, you will have to deal with it. Maybe the rollback feature could help, where you send a user to a content slide when it fails to a question. But that means he must answer every question correctly, prior to it.

  Lilybiri

• IPMI message handler: BMC returned an incorrect answer

  Hello

  I need help to solve this problem, which has occurred on one of the five hosts a few months ago:

  On the Console, after pressing Alt - F1 for a connection, the following messages are displayed:

  IPMI message handler: 5 25, BMC returned incorrect, cmd netfn expected answer had 5 35 netfn cmd

  IPMI message handler: BMC returned incorrect answer, cmd netfn expected 5 27, got netfn 5 cmd 35

  The first message may appear up to 7 - 10 times, the second only once. Hit entry gives me the login prompt.

  After searching the Web, oriented BMC firmware problems, I've updated the U2 to U4 driver with all the latest patches using VUM & answers updated BIOS and firmware with new versions of HP.

  We have 5 host, 4 HP ProLiant DL580 G4 and an HP ProLiant DL580 G5 server. I only arises on the G5. Any host connected to the Clarion SAN.

  System:

  HP ProLiant DL580 G5, System ROM d61 23/09/2008, iLO 2 Firmware Version 1.77 23/04/2009, 4 x Intel Xeon 7220 2, 93 Ghz, 64 GB RAM, 2 x LPe1150 4 Gb FC, 1 x HP Smart Array P400, 2xOnboard Broadcom NetXtreme II BCM5708 1000Base-T, 1xQuad 82571EB Ethernet Gigabit controller

  ESX 3.5.0 (U4) build-184236 (vCenter poster build 176894)

  vCenter 2.5.0 (U3) build-119598

  Thanks in advance!

  Best regards, Per Kristian

  Hi, I just had the exact message, on both of my hosts. It no longer responds and DRS was not to migrate the host to another...! After a reboot, everything is ok, new HP DL 585 G2s, is not sure the firmware revision and hp does not management agents.

  ESX 3.5.0 (U4) build-184236 (vCenter poster build 176894)

  I think this may have something to do with the ILO?

  Clues?

• After review of the Quiz 1 time the Retake that button disappears

  Does anyone have a solution to make the Retake Quiz button appear after review of a quiz?

  If you the quiz of reviews on you do not get the chance to take the Quiz.  Captivate was suggested (and I agree) that it would be cheating if a person could just a review Quiz, find the good answers and then resume the Quiz to spend with these answers.

  Once you review Quiz, you must raise the lesson to try the quiz again.

• MacBook boot, shows flashing folder after 1 minute

  I recently bought a MacBook A1181 2007 model, and it does not start.

  When I press the power button, I get a white screen, and I hear noise from Apple as well as the CD player starts, make a little noise. Initially, the HARD drive makes a terrible noise, but I replaced it, thinking that would like to fix the no start problem, but it didn't. There is no more noise. After about 1 minute on the white screen, I get a folder flashing with an exclamation mark. If I press "C" key, it will show this folder, only does not blink.

  I pressed 'option' when you start trying to get to the recovery screen, and right, which shows a cursor after a few seconds and nothing else. I tried just about every combination of keys that I read on, and none of them work.

  I tried to remove the memory modules, and there is no difference. With or installed, the computer not turn on, instead the white power light illuminated and no more.

  I need a recovery disc or something? How can I get the laptop to boot?

  Your MacBook is trying to find OS X, however, is not able to find it.

  Try recovery mode to repair the HARD drive.

  On OS X Recovery - Apple Support

  http://www.idownloadblog.com/2016/02/24/how-to-start-Mac-recovery-mode/

• Checking update Java plug-in does not show latest version after update same

  Checking update Java plug-in does not show latest version after update same

  You exit and then restart your browser after Java update in order for the right version of Java to display the Plugin Check page. I felt it necessary to do so.

  See also:

  • Article on Java Mozilla - https://support.mozilla.org/en-US/kb/use-java-plugin-to-view-interactive-content
  • VΘrifier versions on site Java - http://www.java.com/en/download/installed.jsp

  Other - you should check your Plugins and update as needed.

  • Check your Plugins - https://www.mozilla.org/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in, version 11.6.7.637 (aka Shockwave Player. Not the same as Flash/Shockwave Flash/Adobe Flash Player)
    • http://KB.mozillazine.org/Shockwave (mozillazine.org seems to be down at the moment (12/12/2012 11:34 am PDT), try again later)
    • Download, save, exit/close all browsers, run the installation program you just downloaded - http://get.adobe.com/shockwave/thankyou/
  • Adobe PDF plugin for Firefox and Netscape 10.1.4 (Adobe Reader 11 is the current version)
    • https://support.Mozilla.org/en-us/KB/use-Adobe-Reader-plugin-view-or-download-PDF-files

• With the help of 5s with ios 9.2.1. Call ringtone but screen does not show the answer since mode. Could not receive call and not able to see the contact call. This may be due to whatsapp.

  With the help of 5s with ios 9.2.1. Call ringtone but screen does not show the answer since mode. Could not receive call and not able to see the contact call. This may be due to whatsapp bug. Please specify.

  bjmrao wrote:

  With the help of 5s with ios 9.2.1. Call ringtone but screen does not show the answer since mode. Could not receive call and not able to see the contact call. This may be due to whatsapp bug. Please specify.

  Please ask Whatapps since you use their app.

• Windows Vista Service Pack 1 was a success; However she was showing as unavailable after you restart the computer.

  * Original title: Vista 32-bit SP1

  I have vista and tried to install sp1 again it has been a success, but is always appear as a download available even after a reboot. Help! Just try to update to IE9.

  Hello

  Thanks for posting your query in the Microsoft Community Forums.

  According to the description of the problem, it seems that Windows Vista Service Pack 1 was successful; However she was showing as unavailable after you restart the computer.

  I will certainly help you with this issue.

  This problem may occur if one of the following conditions is true:

  a. a program on your computer interfered with the installation of the service pack.

  b. There is an inconsistency in the store of Windows services. The store Windows maintenance is a required component to install service packs.

  Here are a few articles that you can consult in order to solve the problem.

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues 

  How to obtain the latest Windows Vista service pack 

  Microsoft Windows Vista Service Pack 1 (SP1) frequently asked questions 

  Solve the problems when you can't install Internet Explorer 9

  If the problem persists, or you have questions about Windows, do not hesitate to let us know. We will be happy to help you.

• Change Desktop Gadget showing incorrect comaparisons to the US Dollar

  Original title: Google Desktop Gadgets - incorrect currencies

  Change Desktop Gadget showing incorrect comaparisons to the US Dollar

  Hello

  I suggest you follow these methods and check.

  Method 1: Remove the cache for all the gadgets and then re - install the Gadget of the currency

  Close the Gadget

  Navigate to %LOCALAPPDATA%\Microsoft\Windows Sidebar\Cache

  Remove all files & folders here

  Re-install the Gadget of the currency.

  If the method above does not work, proceed to the next method.

  Method 2: If you need to uninstall the Gadget completely, you can re - install all of the Gadgets that come with Windows by following these steps.

  Click Start

  Type of restore Gadget

  Select restore the Office Gadgets installed with Windows

  This will restore all Windows by default Gadgets.

  Also see this link: Gadgets Windows 7 can not work or be displayed properly

  http://support.Microsoft.com/kb/2515657

  I hope this helps!

• It shows incorrect serial number when I try to install the CD

  It shows incorrect serial number when I try to install the CD

  Hello

  You can please click the link below.

  Error "serial number is not valid for this product". Creative Suite

  Error failed to validate the serial number | CS6

  Hope this will help.

• My CC of LR 2015 stops right, "do not answer", after the installation of windows 10. What should I do?

  My CC of LR 2015 stops right, "do not answer", after the installation of windows 10. What should I do?

  This means that a problem with the graphics card.

  You update your graphics card drivers?

• If it is not possible to register online, adobe shows incorrect serial number

  Adobe shows incorrect serial number when you try to save the CS6 Premium software on my new computer online. Help, please!

  You must speak with the customer service directly, if you want to help with the problems of account/purchase.  The forums are not the customer.  Most of us are users like you.

  There are available for CS6 products downloads.

  CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html

  You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  CS6: http://prodesigntools.com/adobe-cs6-direct-download-links.html

  If you happen to have a full subscription to CC, then you have access to CS6 products through it as well... Download and install Adobe Creative Cloud apps

• After the third full install of Photoshop here always the same answer after opening provisional "could not initialize Photoshop because of a program error."

  After the third full installation of Photoshop that's always the same answer after provisional opening "Failed to initialize Photoshop because of a program error" someone can tell me what to do flat close all, des-Installer, clean, has chosen already made for the installation of designer Cloud, which begins to... (perhaps regret installing it, 30 days may not hold out of)

  Hi DanielDL,

  Please open the finder, click go and select go to folder and type / library and press ENTER.

  Go to the Application Support/Adobe/color and settings folder and rename it to settings.old

  Then try to run Photoshop and check if the problem persists.

  Thank you