Shrink a table and space recovery

Similar Questions

• Tables and spaces in Dreamweaver

  Hello world.
  
  I'm new to these forums and new to Dreamweaver as well. I am long tech IT which is now called upon to do a bit of Web design. I have a bit of the base down, but I learned about the cover Page (the little I know) and I don't have a lot of knowledge work of DW, but I learn. Here's what I got.
  
  I created a page that is very basic. There is a table at the top of the banner of the site. On the side, there is a table that contains the graphics that are essentially the navigation links. Now, I created this content not knowing that I had to adapt to about 8 pages on a site. Basically, I want to create another table next to the navigation chart. The problem is that when I create the table, he ends up is inserted below the table I want, not next to him. I work in design mode and I tried "Layout Mode" and in easy Mode. Why can't insert a new table in the space next to the existing one. Also, if I create a new table with a cell for the menu and a cell for content, then the menu retains is moved to the bottom of the page when I add content. To do this I use a table in a table. How can I justify a table that exists in a cell so that it is flush with the surface of the cell and is not just hang out in the Middle? I not the menu bar to flush the banner at the top, no matter what. Is there a way to do this?
  
  I am sure that these are pretty simple questions. Can someone give me a hand with this?
  
  Thank you
  Chris

  Christopher Taormina wrote:
  > Hi everyone.
  >
  > I am new to these forums and new to Dreamweaver as well. I'm a long time IT
  > tech which is now called upon to do a bit of Web design. I have some of the
  > basics down, but I learned about the cover Page (the little I know) and I have no
  > have good knowledge of DW, but I'm learning. Here's what I face
  > with.
  >
  > I have created a page that is very basic. There is a table for the top
  > the site banner. On the side, there is a table that contains the graphics that
  > are essentially the navigation links. Now, I created this content not knowing that I had
  > in order to adapt it to about 8 pages on a site. Basically, I want to create a new one
  > table next to the navigation chart. The problem is that when I create the
  > table, he ends up getting inserted below the table I want, not next to him.

  Then divide the existing table in 2 columns or add another column to
  which already ends.

  Select itcell at the bottom of the Dreamweaver menu
  go > modify > Table > Insert Rows/Columns...fill into the rest of the
  information may ask you to give.

  > I work in design mode and I tried "Layout Mode" and in easy Mode.
  > Why can't insert a new table in the space next to the existing one.

  Tbales do not work like this, usually they stack above the other.
  You can put side by side using some css 'float' one side of
  the other, but that may be a little out of your depth at the moment but if
  you want to try it you can give your table a "id".

  Then use the css

  {#rightTable}
  float: left;
  }

  In addition, if
  > I create a new table with a cell for the menu and a cell for the content.
  > then the menu maintains have moved to the bottom of the page when I add content.

  In this senario (NEST) to insert another table in the right cell and put
  your content in it. Isolate the content of your page by placing
  in its own container will potentially stop other page elements
  which affect it.

  I use
  > a table in a table to do. How can I justify a table that exists in one
  > cell so that it is flush with the surface of the cell and is not just hang out
  > in the Middle?

  Select it

  cell in the table. You can do this via the html code tags that are found along the lower part of the design of Draemweaver discover then go

  
  properties and choose 'top' of the 'green' on the menu drop down.

  For some reason, the default is to align a table in the middle of
  anothercell. Why I don't have a clue... its stupid if you ask me.

• Shrink the Table Undo space

  Dear all,
  
  My file of cancellation since more than 6 GB table space size. I'm using Oracle 11 g. How can I reduce the size of the undo tablespace? It would cause problems for the database?
  
  Thank you

  And which returns a selection
  Select nom_tablespace, content from dba_tablespaces;

  Undo tablespace must be re-created in order to reduce it:

  -Create new undo tablespace with the smaller size.
  SQL > create undo tablespace UNDO_1 datafile 'undo1.dbf' size 100 m;

  -The value new tablespace as undo_tablespace
  SQL > alter system set undo_tablespace = undo_1;

  -Drop the old table space.
  SQL > drop tablespace undotbs1 including table of contents

• Shrink the table, rebuild the index?

  I need to reduce some very large tables after the removal of lines and I want to validate the script to run. I was thinking something like this:
  run_deleting_process;
  change the movement line of table my_tableI enable;
  ALTER table my_table retractable space WATERFALL;
  change the movement line of table my_tableI disable;
  I need to rebuild the index after that?, or if I rebuild the markings, can I delete clause CASCADE of the command? It is recommended to run utltrp.sql after shrink the table?, maybe some dependent object needs to be recompiled after the reduction of a table?
  The database version is 11.1.0.7 and documentation does not specify that the index rebuild is required, but I realized it is a desition normall when the narrowing of the tables.
  Thank you

  No there is no rebuild the index after shrinkage. And if you use "cascade", your index will be supported. You do very well.

  Visit this link as well.

  http://www.orafaq.com/Forum/t/137522/2/

• issue with tables and clusters

  Hello

  Another issue with the tables and clusters. I have three engines thatI move on XYZ and then measure something. I need to draw on the 3D, the result of the measurement. How to draw real XYZ and not the index of the data table positions? (I can't actully how to build the matrices 2D forX, Y and Z). In the figures, I give an example of what I need.

  Concerning

  You have to break the data out of the cluster and to present them to the graph 3d to a separate bays for X, Y, Z and W where 'W' is your values measured at the locations described by X, Y, Z.

  This thread shows how trace readings in space 3. The following image shows the data that the original author wanted to draw.

  

  Have fun

  Ben

• How to remove empty entries in a table and replace them with the values of the instance?

  I have a table with values and spaces elements. I want to organize items such as table contains only values eliminating the empty spaces and re-organize the table with the values of cotimuous.  I use a bollean table to populate the items, so the bolleans to false fill the empty I don't want spaces. How can I program the above operation?

  Thank you

  Thank you for your solution, but I just found an easier way. INDEXING CONDITIONAL!. How I miss that. in any case, thanks...

• Problem of sorting of tables and... Using the functionality of the case

  OK, so im do this bit of code that solves the linear equations of 3 x 3, I have most of the code actually lack just 2 small pieces for value of ascetics, garlic try to describe them as detailed as I can, no matter what type of advice or advice with any of them would be greatly appreciated

  Some details of the program:

  Equation MUST be entered in a string and not must (and probably should) be able to do some difficult fixing

  It will be limited to the +'s and-'s signs

  Problem 1.

  I don't really know how to 'sort' my equation according to their variables, example:

  User input: - 2 y + 1 * x z - 1 = 2

  I can make it look like: - 2 y + z - 1 x 1 = 2

  I want what it looks like: 1 x-2 y - 1 z = 2

  I can handle sort the equation, IF I knew the order the user will add variables, the only thing that comes to mind is turning them into a table and make a case for each (x, y, z - x, z, y - etc.) and by using some kind of process of elimination to choose the table 'longer or shorter', I really haven't got much if this because it seems like a stupid idea , but it's the only thing it comes to my mind.

  Problem 2.

  So as im fixing the spaces between characters, at least, I find a '10', I don't want one "1 0", very roughly, I managed to work around this problem by using a "find and replace String", but I'm having trouble making a "case" for her, as in, I can't understand the entry of 'right' to a string of cases. " example:

  User input: 1 x-2 y - 1 z = 12

  

  The result inside the box is correct and resembles a '12', but as I don't know the correct entry, obviously my default case is empty, and it passes through, so the result on the outside is a '1 2 '.

  Any link for someone who fixed a similar problem or guides would be great, I'd also like to announce that 3 weeks ago, I've not even knew what was "LabVIEW", if you can 'dumb down' a little explanation would be greatly appreciated.

  You can try to use php code Analyzer to help analyze. The joint was a quickly hacked together solution that makes several assumptions (a big one being that the entry is correct and equal to is the last thing). This isn't really a complete solution.

  Sorry I didn't have the time to comment on it. If it seems odd, I was using money orders that got lost, when I recorded it for the previous version.

• Left join of the two tables and multiple values into a single value separated by commas

  Hello

  I have following tables with their structures and their data as below.

  CREATE TABLE 'BETODI '. "" BETINFO ".

  (

  VARCHAR2 (8 BYTE) "CURRENTPRESS."

  ENABLE 'TYPEIDCONTAINER' VARCHAR2 (30 BYTE) NOT NULL

  )

  INSERT INTO Betinfo (Currentpress, typeidcontainer) VALUES ('A24G', 'PMC');

  INSERT INTO Betinfo (Currentpress, typeidcontainer) VALUES ('A24D', 'Pensky-MARTENS');

  INSERT INTO Betinfo (Currentpress, typeidcontainer) VALUES ("A25D", "CMP");

  INSERT INTO Betinfo (Currentpress, typeidcontainer) VALUES ('A25G', 'PMC');

  INSERT INTO Betinfo (Currentpress, typeidcontainer) VALUES ('A26D', 'PMC');

  INSERT INTO Betinfo (Currentpress, typeidcontainer) VALUES ('A26G', 'PMC');

  INSERT INTO Betinfo (Currentpress, typeidcontainer) VALUES ("A32G", "V-BFC3");

  INSERT INTO Betinfo (Currentpress, typeidcontainer) VALUES ('A32D', "V-BFC2");

  CREATE TABLE 'BETODI '. "" BETMASTER ".

  (

  ACTIVATE THE "CUREPRESS" TANK (5 BYTES) NOT NULL,

  ACTIVATE THE "TYPE" VARCHAR2 (5 BYTE) NOT NULL,

  NUMBER (5.0) "LASTPCIRIM".

  )

  INSERT INTO BetMaster (Curepress, type, lastpcirim) VALUES ('A24', '45 M 8', 15);

  INSERT INTO BetMaster (Curepress, type, lastpcirim) VALUES ('A25', 42 16', 15);

  INSERT INTO BetMaster (Curepress, type, lastpcirim) VALUES ("A26", 16' 45, 15);

  INSERT INTO BetMaster (Curepress, type, lastpcirim) VALUES ("A27", '45 M 34', 16);

  INSERT INTO BetMaster (Curepress, type, lastpcirim) VALUES ('A28', '45 M 34', 16);

  INSERT INTO BetMaster (Curepress, type, lastpcirim) VALUES ('A29', '45 M 34', 16);

  INSERT INTO BetMaster (Curepress, type, lastpcirim) VALUES ('A30', '45MCH', 15);

  INSERT INTO BetMaster (Curepress, type, lastpcirim) VALUES ("A31", "45MCH", 16);

  INSERT INTO BetMaster (Curepress, type, lastpcirim) VALUES ('A32', '45MCH', 16);

  INSERT INTO BetMaster (Curepress, type, lastpcirim) VALUES ('A33', '45MCH', 16);

  INSERT INTO BetMaster (Curepress, type, lastpcirim) VALUES ("A34", "45MCH", 16);

  These two tables have left join as

  BETMASTER. CUREPRESS = substr (BETINFO. CURRENTPRESS, 1, 3)

  now I want to have the data in the two tables with fields Curepress, Lastpcirim, typeidcontainer.

  Also something like

  Make a group of typeidcontainer if this value is greater than 1 by press separated the values of semicolon (;)

  So, for example above, we should be given as

  A24 PMC 15; PENSKY-MARTENS

  A25 15 PMC

  A26 15 PMC

  A27 16 (NULL)

  A28 16 (NULL)

  A30 15 (NULL)

  A31 16 (NULL)

  A32 16 BFC2-V; V BFC3

  A33 16 (NULL)

  A34 16 (NULL)

  How could do?

  My current request is as

  Select distinct Curepress, lastpcirim, typeidcontainer

  BETMASTER STD left join INF BETINFO

  on the trim (STD. CUREPRESS) = substr (trim (INF. CURRENTPRESS), 1, 3)

  but I am unable to get the values separated by commas.

  Any help would be appreciated.

  Thank you

  Mahesh.

  Hi, Mahesh,

  If you want to only 1 row of output for each distinct combination of currentpress and lastpcirim?  This sounds like a job for GROUP BY.

  And you want the row to contain a list of all different typidcontainers-delimited?  This sounds like a job for the aggregate LISTAGG function.

  WITH joined_data AS

  (

  SELECT DISTINCT

  MST.curepress, mst.lastpcirim, inf.typeidcontainer

  OF betmaster STD

  LEFT JOIN betinfo ON TRIM (mst.curepress) inf = SUBSTR (TRIM (inf.currentpress)

  1

  3

  )

  )

  SELECT curepress, lastpcirim

  LISTAGG (typeidcontainer, ',')

  THE Group (ORDER BY typeidcontainer) AS container_list

  OF joined_data

  Curepress GROUP, lastpcirim

  ;

  Unfortunately, you can't say LISTAGG (DISTINCT ...), so you should always get the separate containers how you already are.  (Note that the subquery is just what you posted).

  Thanks for posting the CREATE TABLE and INSERT statements; It is very useful.  Don't forget to tell what version of Oracle you are using.  LISTAGG was new in Oracle 11.2.

  Why not add CHECK constraints (and perhaps triggers) to your tables, so that curepress and currentpress are not stored with the head or trailing spaces?  Then you wouldn't need to use the PAD in queries like this, and your code would be simpler and more effective.

• New tables and indexes created do not appear in the view dba_segments

  Hi all
  
  I created 3 tables and indexes, but these items do not appear in dba_segments views. Is this a normal behavior? Previously, with dictionary managed tablespace, I can specify the least possible to create, at the table/index is created. But I don't know how works the locally managed tablespace. Please do advice. Thank you much in advance.
  
  I am using Oracle 11 g R2 (11.2.0.1.0) for Microsoft Windows (x 64), running on Windows 7.
  
  To reproduce this problem, I created the tablespaces as follows:
  
  CREATE TABLESPACE CUST_DATA
  DATAFILE ' d:\app\asus\oradata\orcl11gr2\CUST_DATA01. DBF' SIZE 512K
  AUTOEXTEND ON NEXT MAXSIZE 2000 K 256K
  MANAGEMENT UNIFORM LOCAL 256K SIZE MEASURE
  SEGMENT SPACE MANAGEMENT AUTO;
  
  CREATE TABLESPACE CUST_INDX
  DATAFILE ' d:\app\asus\oradata\orcl11gr2\CUST_INDX. DBF' SIZE 256K
  AUTOEXTEND ON NEXT MAXSIZE 2000 K 128K
  MANAGEMENT UNIFORM LOCAL 128K SIZE MEASURE
  SEGMENT SPACE MANAGEMENT AUTO;
  
  CREATE TABLE CUSTOMER_MASTER (CUST_ID VARCHAR2 (10))
  CUST_NAME VARCHAR2 (30),
  E-MAIL VARCHAR2 (30),
  DATE OF BIRTH,
  ADD_TYPE CHAR (2) CONSTRAINT CK_ADD_TYPE CHECK (ADD_TYPE ("B1", "B2", "H1", "H2")),
  CRE_USER VARCHAR2 (5) DEFAULT USER,.
  CRE_TIME TIMESTAMP (3) DEFAULT SYSTIMESTAMP.
  MOD_USER VARCHAR2 (5).
  MOD_TIME TIMESTAMP (3),
  CONSTRAINT PK_CUSTOMER_MASTER PRIMARY KEY (CUST_ID) USING INDEX TABLESPACE CUST_INDX)
  TABLESPACE CUST_DATA;
  
  SQL > SELECT TABLE_NAME, nom_tablespace
  USER_TABLES 2
  3 WHERE TABLE_NAME LIKE '% CUST. "
  
  TABLE_NAME, TABLESPACE_NAME
  ------------------------------ ------------------------------
  CUSTOMER_MASTER CUST_DATA
  
  SQL > SELECT INDEX_NAME, nom_tablespace
  2 FROM USER_INDEXES
  3 WHERE TABLE_NAME LIKE '% CUST. "
  
  INDEX_NAME TABLESPACE_NAME
  ------------------------------ ------------------------------
  PK_CUSTOMER_MASTER CUST_INDX
  
  
  SQL > SELECT nom_segment, SEGMENT_TYPE, nom_tablespace, BYTES
  2 FROM WHERE USER_SEGMENTS;
  
  no selected line

  An extension to what Sybrand said:

  There is a parameter called differed_segment_creation, who runs the behavior.

  If it is set to TRUE (the default), no segments will be allocated until you fill your table / index.

  Try to insert a row. You will see your table and index in dba_segments.

  See for more information

  http://docs.Oracle.com/CD/E14072_01/server.112/e10595/tables002.htm

• Size of the data in a table and the size of the table

  I am trying to determine the size of the data in a table and also the overall table size. I use the following query:
  
  SELECT BOTTOM (a.owner) as owner,
  LOWER (a.table_name) AS table_name,
  a.tablespace_name,
  a.Num_Rows,
  ROUND ((a.blocks * 8 / 1024)) AS size_mb,
  a.Blocks,
  a.Blocks * 8 Blocks_Kilo_Byte.
  a.PCT_FREE,
  a.compression,
  a.Logging,
  b.bytes / 1024 / 1024
  From all_tables a, dba_segments b
  WHERE the a.owner AS SUPERIOR ("USER_TEST")
  AND a.table_name = "X_TEST_TABLE."
  AND b.segment_name = a.table_name
  AND b.owner = a.owner
  ORDER BY 1, 2;
  
  Is this the right way to go about finding the size of the data in a table? If this isn't the case, please give your suggestions.
  
  BTW, this in a 10g version.

  You probably want to use the DBMS_SPACE package. In particular, the procedures SPACE_USAGE and UNUSED_SPACE to get an accurate account of the use of space in a table. Your application may give you a relatively accurate estimate if the optimizer on your table's statistics are reasonably accurate estimates. But there is no guarantee that the optimizer statistics are accurate.

  If you want just an approximate answer and you're comfortable that your statistics are accurate, this query may be close enough. If you want a specific response, however, use the DBMS_SPACE package.

  Justin

• Oracle 11g R2, CREATE THE TABLE and QUOTAS

  Hi all
  I need some insight on a strange behavior, that I discovered in Oracle 11 g 2. Don't know if I'm missing something or if I just discovered a security issue with Oracle.
  
  Oracle Version: 11.2.0.1.0
  
  The problem is with the CREATE TABLE and the QUOTA on the specific tablespace privilege.
  
  Please, try this on your system (if you have some free time and care to confirm the "bug").
  
  Create a user, grant privileges than two, CREATE THE SESSION and CREATE TABLE.
  
  Grant NO quota on any tablespace.
  
  Try to create a table on any tablespace (except SYSTEM) and everybody say if it worked or not.
  
  The oracle documentation provides the following:
  
  To create a relational table in your own schema, you must have the CREATE TABLE system privilege. To create a table in the schema of another user, you must have the CREATE ANY TABLE system privilege. In addition, the owner of the schema containing the table must have a quota of space on the tablespace contains the table or the UNLIMITED TABLESPACE system privilege.
  
  [http://download.oracle.com/docs/cd/E11882_01/server.112/e17118/statements_7002.htm#SQLRF01402]
  
  The fact is, so far, on two different instances of Oracle 11 g 2, my users are not limited in the creation of the tables only when they have quotas, but where they want to, except the STRING.
  
  The behavior correct would be to deny the creation of the table the tablespace where there is no quota, but it does not work.
  
  My instance of Oracle 10 g behave properly and therefore the creation of the table is denied the tablespace with no quota.
  
  P.s1 sorry if this a well known "bug/problem/question". I've been ridiculous on a well-known forum for the same question. I don't need to be "filled spoon" as shown on this famous site! I have read the documentation! I googled a lot!
  
  P.s2 even if the creative work of table on tablespace with no quota, you cannot insert data into it. Yes, big picture, the user cannot not filled space with irrelevant data tables, but it can create thousands of tables...!
  
  Did I miss something?
  Is there a 'default' option I have to mark to prevent the creation of the table where it shouldn't?
  ? (?)

  Please read http://tkyte.blogspot.com/2011/02/deferred-segment-creation.html.

• text field with only letters and spaces

  Hello everyone, I am a newbie to livecycle designer and now I have a very confusing issue. I am trying to create a field named "last name." I wish she accepts only letters and spaces - you know, some names have two words with a space between them - and does NOT accept the figures. I tried to define the schemas of the tabled text, but he did not have a solution. Can someone tell me please how to do? Thank you.

  BTW, how to import a drop-down list to an XML file? I created an XML file below as taught in the help file:

  <form>

   <lists>

   <item uiname="MasterCard" token="MC"/>

   <item uiname="Visa" token="VS"/>

   <item uiname="Eurocard" token="EC"/>

   <item uiname="Special Card" token="SC"/>

   </lists>

  </form>

  then I tried to bind a list with her, but it does not work.

  Thank you

  Place the following code in the text box's change event...

  If (xfa.event.change.match (/ [A - Z\ \a-z]/) == null)
  XFA. Event.change = "";

  Thank you

  Srini

• Gaps and spaces between the slices in Dreamweaver

  I'm running OS X 10.5.8 on a MacBook Pro using Photoshop, I created my Web page (with the predefined html specifications) and ruled the areas I wanted to make connections. Once I said to create links, he showed gaps and spaces between the slices. After I transferred my site page is OK in Safari and Chrome, but firefox runs spaces will appear again. What should I do?

  Here is my code:

  < html >

  < head >

  Book of the < title > Brad Hager < /title >

  < meta http-equiv = "Content-Type" content = text/html"; charset = ISO-8859-1 ">"

  < style type = "text/css" >

  <!--

  @import url("/site_layout.css");

  a: link {}

  text-decoration: none;

  }

  a: visited {}

  text-decoration: none;

  }

  a: hover {}

  text-decoration: none;

  }

  a: active {}

  text-decoration: none;

  }

  ->

  < / style >

  < / head >

  < body bgcolor = "#FFFFFF" leftmargin = "0" topmargin = "0" marginWidth = "0" marginheight = "0" >

  <! - except for the Web Slice (mybookonline.psd) components - >

  < table width = "1025" height = "769" border = "0" align = "center" cellpadding = "0" cellspacing = "0" id = "Table_01" >

  < b >

  < td colspan = "5" > < img src = "images/mybookonline_01.jpg" width = "1024" height = "20" alt ="" > < table > "

  < td > < img src = "images/spacer.gif" width = "1" height = "20" alt ="" > < table > "

  < /tr >

  < b >

  < td rowspan = "6" > < img src = "images/mybookonline_02.jpg" width = "3" height = "748" alt ="" > < table > "

  < td > < a href = "/ JPEG/Brad Hager portfolio/index.html" > < img src = "images/advertisingportfolio.jpg" width = "201" height = "16" alt ="" > < /a > < table > "

  < td colspan = "3" > < img src = "images/mybookonline_04.jpg" width = "820" height = "16" alt ="" > < table > "

  < td > < img src = "images/spacer.gif" width = "1" height = "16" alt ="" > < table > "

  < /tr >

  < b >

  < td colspan = "3" > < a href = "/ stamp_resume.html" > < img src = "images/resume.jpg" width = "216" height = "15" alt ="" > < /a > < table > "

  < td rowspan = "5" > < img src = "images/mybookonline_06.jpg" width = "805" height = "732" alt ="" > < table > "

  < td > < img src = "images/spacer.gif" width = "1" height = "15" alt ="" > < table > "

  < /tr >

  < b >

  < td colspan = "2" rowspan = "2" > < a href = "/ video.html" > < img src = images/creations.jpg"" width = "203" height = "15" alt = "" > < /a > < table > "

  < td > < img src = ' images/curriculum vitae - 09.jpg' width = '13' height = '2' alt = "" > < table >

  < td > < img src = "images/spacer.gif" width = "1" height = "2" alt ="" > < table > "

  < /tr >

  < b >

  < td rowspan = "3" > < img src = "images/mybookonline_09.jpg" width = "13" height = "715" alt ="" > < table > "

  < td > < img src = "images/spacer.gif" width = "1" height = "13" alt ="" > < table > "

  < /tr >

  < b >

  < td colspan = "2" > < a href = "/ creations.html" > < img src = images/email.jpg"" width = "203" height = "17" alt = "" > < /a > < table > "

  < td > < img src = "images/spacer.gif" width = "1" height = "17" alt ="" > < table > "

  < /tr >

  < b >

  < td colspan = "2" > < img src = "images/mybookonline_11.jpg" width = '203' height = "685" alt ="" > < table > "

  < td > < img src = "images/spacer.gif" width = "1" height = "685" alt ="" > < table > "

  < /tr >

  < b >

  < td > < img src = "images/spacer.gif" width = "3" height = "1" alt ="" > < table > "

  < td > < img src = "images/spacer.gif" width = "201" height = "1" alt ="" > < table > "

  < td > < img src = "images/spacer.gif" width = "2" height = "1" alt ="" > < table > "

  < td > < img src = "images/spacer.gif" width = "13" height = "1" alt ="" > < table > "

  < td > < img src = "images/spacer.gif" width = "805" height = "1" alt ="" > < table > "

  < td > < table >

  < /tr >

  < /table >

  <!--end Save for Web Slice components-->

  < script type = "text/javascript" >

  var (("https:" == document.location.protocol) = little? " ") https://SSL ." : " http://www .");

  document. Write (unescape ("% 3Cscript src ='" + little + "some google-analytics.com/ga.js type = ' text/javascript' %3E%3C/script%3E"));))

  < /script >

  < script type = "text/javascript" >

  try {}

  var mouseover = _gat._getTracker("UA-xxxxxx-x");

  pageTracker._trackPageview ();

  } catch (err) {} < /script >

  < / body >

  < script type = "text/javascript" >

  var _gaq = _gaq. [];

  _gaq.push (['_setAccount ', 'UA-10172368-3']);

  _gaq.push (['_trackPageview ']);

  (function() {}

  GA var = document.createElement ('script'); GA.type = ' text/javascript '; GA. Async = true;

  ga.src = ("https:" == document.location.protocol? ) https://SSL ' : ' http://www ( ') + «.google-analytics.com/ga.js ";

  var s = document.getElementsByTagName ('script') [0]; ParentNode.InsertBefore (ga, s);

  })();

  < /script >

  < / html >

  To see how exceptionally bad is written PS HTML (and the reason of your gaps & spaces) count up how many instances of "colspan" and "rowspan", you will find in your code.  Reading-

  http://www.apptools.com/rants/spans.php

• Bigger disk-swapping, but down two, possible to remove them from the table, and then expand?

  I have a R710 with a PERC 6 / i, Win 2008 R2 running. I have a small disk for the operating system, the other 5 bays are filled with 1 TB disks in a RAID array-5.

  I need to add more storage, so I want to buy three discs of 3 TB. I plan on the withdrawal of old readers, and then put it in the new, bigger. I assume that it will take 1 of the 3 TB and repair. Leaving free 2 TB disk. Repeat this step twice more, which will result in three discs of 3TO with 6 TB of disk space not used in the RAID.

  Is it possible to have the controller expand storage in my table of RAID-5 existing free space, and then delete the two remaining 1 TB disks in the array?

  Who is? Is it still possible? Or do I have to backup the data on another storage device and delete the table and simply start a new one with the three discs of 3 TB and copy the data back?

  This will not work:

  (1) the PERC 6 won't take 3 TB drives; the maximum size is 2 TB.

  (2) you cannot delete records in a table - your RAID 5 5x1TB must always have records of 5 or more (you can add without deleting).  Even when using the same number of disks, isn't it possible to do the smaller table/VD.

  (3) even if you used 2 TB disks, there is no way to expand the RAID 5 using the extra space on the disks - with 5 disks in RAID 5, it will remain the same size. The only thing you can do with the new space is to create a second RAID array on the disks (called "slice").  This new VD is handled by the operating system as another "drive."

  Keep in mind if backup and restore in a larger painting, as if the VD ('disc') is greater than 2 TB, the disc "" MUST be converted to GPT and active UEFI bootmode (instead of BIOS).  Make sure that your backup software is capable of restoring one using the BIOS install on a system UEFI (and the 'disc' TPG 'disc' MBR).

• RMAN - Catalog and ControlFile Recovery

  I recorded rock database (same host) and Fatima databases (in another machine) in the RECOVERY CATALOG.
  
  I m sticking with Faure database backup using the recovery catalog
  
  
  
  RMAN >
  
  Complete recovery manager.
  ^ C
  H:\ > rman target sys/farooq@farooq catalog rman2/cat@rock
  
  Recovery Manager: Release 10.2.0.1.0 - Production on Mon Sep 8 14:41:17 2008
  
  Copyright (c) 1982, 2005, Oracle. All rights reserved.
  
  connected to target database: FAURE (DBID = 1820635189)
  connected to the recovery catalog database
  
  RMAN > register database;
  
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03009: failure of the register command to the default channel on 2008-09-08 14:41:37
  RMAN-20002: target database is already registered in the recovery catalog
  
  RMAN > outline report;
  
  Report of the database schema
  
  List of permanent data files
  ===========================
  Size (MB) Tablespace RB segs Datafile file name
  ---- -------- -------------------- ------- ------------------------
  1 YES D:\ORADATA\FAROOQ\SYSTEM01 480 SYSTEM. DBF
  2 35 UNDOTBS1 D:\ORADATA\FAROOQ\UNDOTBS01 YES. DBF
  SYSAUX 3 250 NO D:\ORADATA\FAROOQ\SYSAUX01. DBF
  4 5 USERS WITHOUT D:\ORADATA\FAROOQ\USERS01. DBF
  5 100 EXAMPLE NO D:\ORADATA\FAROOQ\EXAMPLE01. DBF
  
  RMAN > list backup;
  
  
  RMAN > backup as incremental compressed backupset of level 0 database more archivelog;
  
  
  From backup 08-SEP-08
  Current archived log
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failure of command thus backup archivelog at 2008-09-08 14:43:03
  RMAN-03014: implicit recovery catalog Resync failed
  RMAN-06004: error ORACLE recovery catalog database: RMAN-20020: incarnation of the database not defined
  
  RMAN > list incarnation of database;
  
  
  List of Incarnations of the database
  DB key Inc key STATE ID DB name DB reset reset time SNA
  ------- ------- -------- ---------------- --- ---------- ----------
  3641 3649 FAURE 1820635189 PARENT 534907 29 JULY 08
  FAURE 3641 3642 1820635189 CURRENT 695424 08-SEP-08
  
  RMAN > RESET DATABASE to incarnation 3642
  2 >.
  
  database restore the incarnation 3642
  
  RMAN > backup as incremental compressed backupset of level 0 database more archivelog;
  
  
  From backup 08-SEP-08
  Current archived log
  allocated channel: ORA_DISK_1
  channel ORA_DISK_1: sid = 142 devtype = DISK
  channel ORA_DISK_1: starting from backupset journal archive compressed
  channel ORA_DISK_1: specification of archive log backup set
  archive log entry thread = 1 sequence 1 recid = 4 = 664886867 stamp =
  archive log entry thread = 1 sequence 2 recid = 5 = 664888152 stamp =
  archive log entry thread = 1 sequence = recid 3 = 6 = 664888938 stamp
  archive log entry thread = 1 sequence 4 recid = 7 = 664889572 stamp =
  archive log entry thread = 1 sequence 5 recid = 8 = 664889658 stamp =
  archive log entry thread = 1 sequence 6 recid = 9 = 664891871 stamp =
  archive log entry thread = 1 sequence 7 recid = 10 = 664892590 stamp =
  archive log entry thread = 1 sequence 8 recid = 11 = 664900983 stamp =
  archive log entry thread = 1 sequence 9 recid = 12 = 664902190 stamp =
  channel ORA_DISK_1: from room 1 to 08 - SEP-08
  channel ORA_DISK_1: finished piece 1 to 08 - SEP-08
  piece handle = D:\ORADATA\FLASH_RECOVERY_AREA\FAROOQ\BACKUPSET\2008_09_08\O1_MF_ANNNN_TAG20080908T150314_4D9Y35PK_. Tag BKP = comment TAG20080908T150314 = NONE
  channel ORA_DISK_1: complete set of backups, time: 00:00:26
  channel ORA_DISK_1: starting from backupset journal archive compressed
  channel ORA_DISK_1: specification of archive log backup set
  archive log entry thread = 1 sequence 8 recid = 1 stamp = 664886398 =
  archive log entry thread = 1 sequence 9 recid = 2 = 664886399 stamp =
  archive log entry thread = 1 sequence 10 recid = 3 = 664886403 stamp =
  channel ORA_DISK_1: from room 1 to 08 - SEP-08
  channel ORA_DISK_1: finished piece 1 to 08 - SEP-08
  piece handle = D:\ORADATA\FLASH_RECOVERY_AREA\FAROOQ\BACKUPSET\2008_09_08\O1_MF_ANNNN_TAG20080908T150314_4D9Y407K_. Tag BKP = comment TAG20080908T150314 = NONE
  channel ORA_DISK_1: complete set of backups, time: 00:00:09
  Backup finished 08-SEP-08
  
  From backup 08-SEP-08
  using channel ORA_DISK_1
  channel ORA_DISK_1: additional start-up compressed 0 datafile backupset
  channel ORA_DISK_1: specifying datafile (s) in backupset
  input datafile fno = 00001 name = D:\ORADATA\FAROOQ\SYSTEM01. DBF
  input datafile fno = 00003 name = D:\ORADATA\FAROOQ\SYSAUX01. DBF
  input datafile fno = 00005 name = D:\ORADATA\FAROOQ\EXAMPLE01. DBF
  input datafile fno = name 00002 = D:\ORADATA\FAROOQ\UNDOTBS01. DBF
  input datafile fno = 00004 name = D:\ORADATA\FAROOQ\USERS01. DBF
  channel ORA_DISK_1: from room 1 to 08 - SEP-08
  channel ORA_DISK_1: finished piece 1 to 08 - SEP-08
  piece handle = D:\ORADATA\FLASH_RECOVERY_AREA\FAROOQ\BACKUPSET\2008_09_08\O1_MF_NNND0_TAG20080908T150351_4D9Y49WW_. Tag BKP = comment TAG20080908T150351 = NONE
  channel ORA_DISK_1: complete set of backups, time: 00:01:15
  Backup finished 08-SEP-08
  
  From backup 08-SEP-08
  Current archived log
  using channel ORA_DISK_1
  channel ORA_DISK_1: starting from backupset journal archive compressed
  channel ORA_DISK_1: specification of archive log backup set
  archive log entry thread = 1 sequence 10 recid = 13 = 664902308 stamp =
  channel ORA_DISK_1: from room 1 to 08 - SEP-08
  channel ORA_DISK_1: finished piece 1 to 08 - SEP-08
  piece handle = D:\ORADATA\FLASH_RECOVERY_AREA\FAROOQ\BACKUPSET\2008_09_08\O1_MF_ANNNN_TAG20080908T150512_4D9Y6T1D_. Tag BKP = comment TAG20080908T150512 = NONE
  channel ORA_DISK_1: complete set of backups, time: 00:00:02
  Backup finished 08-SEP-08
  
  From control file and SPFILE Autobackup 08-SEP-08
  piece handle = D:\ORACLE\RMAN_BACKUP\CTL_SP_BAK_C-1820635189-20080908-09 comment = NONE
  Control finished and Autobackup SPFILE file 08-SEP-08
  
  RMAN > list backup;
  
  
  Backup list
  ===============
  S LV TY Device Type delay #Pieces compressed #Copies Tag key
  ------- -- -- - ----------- --------------- ------- ------- ---------- ---
  4615 DISC 08-SEP-08 1 1 YES TAG20080908T150314
  4617 B 0 A DRIVE 08-SEP-08 1 1 YES TAG20080908T150351
  4650 DISC 08-SEP-08 1 1 YES TAG20080908T150512
  4670 HAS NO DISK 1 1 08 - SEP - 08 NO TAG20080908T150517
  
  RMAN >
  
  
  
  Now, I m conneting to Faure - target database and obtaining the same information from the control file backup.
  
  H:\ > rman target sys/farooq@farooq
  
  Recovery Manager: Release 10.2.0.1.0 - Production on Mon 8 Sep 15:05:38 2008
  
  Copyright (c) 1982, 2005, Oracle. All rights reserved.
  
  connected to target database: FAURE (DBID = 1820635189)
  
  RMAN > LIST BACKUP SUMMARY;
  
  using the control file of the target instead of recovery catalog database
  
  Backup list
  ===============
  S LV TY Device Type delay #Pieces compressed #Copies Tag key
  ------- -- -- - ----------- --------------- ------- ------- ---------- ---
  21. A DRIVE 08-SEP-08 1 1 YES TAG20080908T150314
  22. A DRIVE 08-SEP-08 1 1 YES TAG20080908T150314
  23 B 0 A DRIVE 08-SEP-08 1 1 YES TAG20080908T150351
  24. A DRIVE 08-SEP-08 1 1 YES TAG20080908T150512
  25 A NO DISK 1 1 08 - SEP - 08 NO TAG20080908T150517
  
  My question: why are the information stored in the database control file (Faure) target so that its stored in the recovery catalog?

  Hello

  By default, RMAN stored metadata in the file control, all the RMAN is first written to control the file and then catalog of recovery if leaves. For example, when rman creates a new backupset, you can view the information in the v$ backup_set and you can also view the same information of the recovery RC_BAKCUP_SET catalog views.
  So every change repository is stored in two places... Control file and optionally recovery_catalog

  The catalog of recovery of the RMAN Repository versions are stored in database tables and version control repository os file stored as files in with in the control file.

  -Pavan Kumar N