DC7700 SFF: ARE OK TIME MY PC?

Similar Questions

• DC7700 SFF BIOS support

  My father has just bought a PC HP Compaq DC7700 SFF (Small Form Factor) used and refurbished and we get an error whenever the computer places.  It reads "BIOS ME Extension stopped Module.  I did some research on Google, and it seems that the error indicates that the BIOS and the BIOS Extension ME are out of sync, which means that their versions do not match.  We are a bit surprised, it was not addressed prior to packaging for resale upward, but nevertheless we are here.  The computer came with Windows 7 Home Premum 64 - Bit.  It is the source of the problems.  Everything I read says to use a BACK program called "FlashBin" to Flash the BIOS with the latest version.  Whenever we try to run the program, it errors saying incompatile architecture (he wants to x 86).  We tried other things is manually creating a BOOT partition on a USB Flash drive and try to run the program to start BACK, but it does not, saying no found BOOTMGR or something.  Another option I found is that the BIOS has a setting called something like "Flash BIOS update" and asked where to find the file. CD-ROM or USB.  When we put on the USB flash utility, BIOS indicates the key USB is corrupted or damaged.  This also happens when we just updated BIOS. BIN file on the USB key with nothing else.

  We are really lost here.  As I said, this is a factory refurbished PC and we would really like to get this annoying error message to go outside every time we start.  Can someone help me please?  Thank you!

  Hello:

  You can read some of the posts offered on reset the cmos on your PC.

  Reset the cmos works the same on the dc7700.

  http://h30499.www3.HP.com/T5/business-PCs-Compaq-Elite-Pro/me-error-on-Compaq-dc5800/TD-p/940477#.UvFtmemPK9I

  If you want to try the update the ME firmware suggestions, you must use the files to download on the dc7700 under section BIOS support page and I wouldn't update the firmware if you have to do in Windows for the same reason that you would not run an update of the BIOS under Windows.

  I hope that the reset cmos will work for you.

  I have never had this problem on any of my dc7xxx as PC, if unfortunately I won't be able to help you with specific measures to be taken regarding the update the firmware.

• DC7700 Small Form Factor: BIOS of HP DC7700 SFF

  I have a DC7700 sff desktop that was running Windows 10 with a glitch. With each operating system installed (LInux or Windows), I saw an error memory 4 intermittent beep. I have reinstalled the memory, replaced the modules, and nothing seemed to help. Food seems to be good and I was able to use the machine with two additional hard drives attached to another hard drive cloning.

  To try to solve the problem, I tried to upgrade to version 3.05 using the method of updating the F10 BIOS setup menu. The system has reached 70% and then didn't update. Now, it does not start. I found a method online for the resettlement of the BIOS, but all forums seem to have old non-working links to the updates to the BIOS. The description of the BIOS flashing utility indicates that it is to change the splash screen. Can someone tell me please to the correct location for the latter. BIN files? Thank you!

  Hello:

  4 beeps is a power supply issue.  5 beeps is a memory problem.

  Business support pages are missing a lot of pilots.  HP is aware of the problem, but I don't know how long it's going to be to fix it.

  Given that your BIOS is v1.01, you need to follow the progression of xx 1.  3.05 was for vPro models this is why flash BIOS probably did not work.

  I have compressed upwards and attached files you need an old thread that I have helped someone else with below.

  It will bring your BIOS to v1.16, who was the final version.

• Problems of updating HP dc7700 SFF NIC driver

  Hi all!

  I have a HP dc7700 SFF desktop I have been working to rebuild. I restored it to out of State of the box with the built-in HP restore partition, put the OS Win XP Pro SP2. The Integrated NIC is a processor Intel 82566 DM. The default driver is version 9.4.21.0 (as dated 19/07/2006) and works very well at speeds of 1 GB. The problem is that when I upgrade the driver to version 9.15.17.0 (dated as of 07/03/2012) using the latest ProWin32.exe installer available on the Intel site, the NETWORK adapter will connect is no longer at a speed of 1 Gb and will connect to 100 MB. I know that the machine has network connectivity and seems to be very well until I do the update of the NETWORK adapter driver. Starting after the rendering of the office, State system for the network connection status bar icon indicates that it is connected to 1 GB for a moment, then it shows as disconnected, then reconnected shows, but only 100 MB. I tried to uninstall and reinstall the package of pilot several times with no luck. I also tried the official HP package from the downloads dc7700 (SP51788) page and that brought no result. I can restore the r in car to the 2006 version and the NETWORK card will reconnect at a speed of 1 Gb again.

  I'm thinking / hoping I can't be the only person who is having this same problem? Any help would be tremendously appreciated. If I can provide any additional information, please let me know. Thank you!

  Why not just use the driver of 2006 if it works well? Newer isn't always better, especially when it comes to drivers.

• HP DC7700 SFF: DC7700 SFF - No Beep with no ram, CPU hot, Hot, Hot GPU - STATION Chipset NOT

  Hi I have a DC7700 who is not a beep or anything like that and no video display.  I have two we DC7700 SFF BIOS is damaged will need to perform a recovery of the standard BIOS I am guessing Via USB AND BIOS. WPH RIGHT?

  https://www.BIOS-mods.com/BIOS-recovery/Phoenix-BIOS-recovery/

  Try to get the Xeon L5320 at work that I got this message...

  

  In any case DC7700 is not posting the cpu is hot, the northbridge is hot and the gpu gets hot.  Tone post with e6300 with ram.  I have two e6300 and tested both.  It will beep every time if I drill the cover on the lga775 socket, while it is on.  Otherwise, I get beeps...

  Thank you

  T7500 - Dual Xeon X 24 son @ Over 1 terabyte/s
  16 GB Triple Channel DDR3 @ 35 GB/s
  HyperDuo of e/s 1 TB + SSD @ slow b/c of $15 SSD
  GTX 580 @ 900 Mhz @ 43 billion, 200 million pixels per second.

  Thank you very much Sir for your advice, I appreciate it.  Thank you and have a nice day.

  DC7700 has a cpu socket problem where it will blink red and beep if the cpu is not "sitting" remove the processor and replacement in different ways etc will allow it to function normally.  Well that does not support DC7700 Q6600 DC7800 sff motherboard would be in the order of $15 on ebay it fits dc7700 sff chassis.

  * SOLVED *.

  Ended up literally having an empty 2GB FAT16 USB FLASH DRIVE with only the last v116 bin to the root.  Start the PC with the USB in the port before, said flash has successfully and it is up and going again.

• Update motherboard on a DC7700 Sff

  Hello.

  First of all, sorry if this is in the wrong place. IM new to the forum stuff. Also, sorry if this has already been answered.

  So I'm wanting to upgrade my dc7700 sff as much as possible. Up yet, I upgraded the GPU, RAM disk and windows, but I would like to upgrade the motherboard. From what people have told me, it is impossible to update the motherboard, but I would like some other opinions before I spend money I havnt really on a new PC.

  Here is a complete list of my specs (on the top of my head):

  160 GB Sata HARD drive

  3 GB RAM

  ATI Radeon X 1300 Pro GPU

  Intel (R) Core (TM) 2 CPU 6400 @ 2.13 GHz 2.13 GHz

  If you need more info please let me know and thanks for the help!

  Hello:

  If you want another opinion, then I agree with everyone who said that we can't do.

  Dc7800 SFF dc7900 SFF and the Elite SFF 8000-8300 have a redesigned cards mothers and where, so that they do not coincide in your model.

  And if you are referring to a classic motherboard you can buy from a manufacturer of motherboard (ASUS, Gigabyte, etc.), which can be done either.

• Since the worm 13 loading toolbar buttons are 3 times the size they were and now pronounce on the large amount of display. How to reset the?

  toolbar buttons are 3 times the height, they need to be. How can I fix them.
  I tried to include a screenshot to illustrate, but it won't let me.

  You can not attach a screenshot in the first row who starts a thread, but you can do it in additional posts.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  You can try to reset Firefox with a new profile.

  • https://support.Mozilla.org/KB/reset-Firefox-easily-fix-most-problems
  • https://support.Mozilla.org/KB/recovering+important+data+from+an+old+profile

• DC7700 SFF: PCI Simple Communications Controller

  I have a DC7700 SFF pc that I have upgraded to Windows 7 Ultimate, but in Device Manager, the controller PCI communications shows no drivers not loaded and it is not on my machine.

  I tried in vain to search on the HP and Intel web sites for these and still no luck.

  Help!

  Hello:

  You need this driver.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=3232104 & swItemId = ir_46941_1 & swEnvOid = 2096

  Install manually if auto installation does not work.

• Compaq dc7700 sff: motherboards latest include the compaq dc7700 sff case?

  I want to use the case of an old dc7700 sff, but the layout of the Panel back looks like it is the inverse of all the motherboards I've found. Is there any motherboards that support DDR3 RAM and have at least three connectors SATA (SATA 3 preference) that will be adapted to this case (PCI ports on the left instead of right of ports)?

  Hello:

  Unfortunately, there is not.

  The dc7700 was the last model that used the case that has also been used d530, dc7100, dc7600.

  When the dc7800 came out, they used a completely different case, which was also used on the dc7900.

  Then the case was changed again when the 8xxx models Elite have been introduced.

  The first business office of HP in this class that came with sata ports 3 was the 8200 Elite SFF/CMT.

• KB2844285, KB283940 and KB890830 this updates are many times downloaded and installed. How is it.

  KB2844285, KB283940 and KB890830 this updates are many times downloaded and installed. This three updates before you installed. But repeat and more repeat the automatic download. How is it? Please help me.

  For KB2844285 and KB2833940 do the following.

  Uninstall the .NET Framework 2.0. Then download the .NET Framework Cleanup Tool
  In the drop-down list box, select 2.0 and clean.
  Reinstall .NET Framework 2.0
  Visit Windows Update or Microsoft Update and let it install the rest of the 2.0 updates, including KB2844285 and KB2833940.

  Check if they install and report.

  REF: http://support.microsoft.com/

  Malicious Software Removal Tool (MSRT), KB890830, manually download and run.
  MSRT

• I use Foglight 5.6.5 and I was wondring where, in the dashboard - we can see the foglight agents associated ip addresses. There are many times we need the ip address of a host, I want to add a custom dashboard if necessary to include this

  I use Foglight 5.6.5 and I was wondring where, in the dashboard - we can see the foglight agents associated ip addresses. There are many times we need the ip address of a host, I want to add a custom dashboard if necessary to include this

  George, was the question that you asked:

  "How can I find the IP addresses of remote hosts being monitored?

  or

  "How can I find the IP address of the FGLAM server that is monitoring?

• Can not find the network work dc7700 SFF driver

  I recently reinstalled Windows XP Pro on a dc7700 SFF machine and while the XP installation went without a hitch I can't install an ethernet driver.

  I tried to use all the 5 drivers from this page without success.

  I did some quick research and it doesn't seem to be a wide spread question.

  Windows detects hardware in the device as "ethernet controller" Manager without a driver installed.

  Running the Intel and Broadcom driver installs guest messages "no card detected Intel/Broadcom.

  Any other ideas? The machine is out of warranty since 2010.

  Hello:

  In my view, it has the Intel card and for some reason any HP driver Intel doesn't work.

  Use it to Intel, and you should be good to go. First download listed is for XP 32 bit.

  http://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=18717&lang=eng&OSVersion=Windows%20XP%20 * & DownloadType = drivers

  Paul

• Where are the time Machine connects to Sierra?

  Running Sierra on a late 2009 iMac. Time Machine works well and updated regularly. However the Time Machine buddy Widget shows all the information. Study using the Console indicates that the TM log entries are to be absent in Syslog. Nothing shows using the "backupd" as a filter on the system log. Under Diagnostics and usage data, I see information for the type of backup and "NOERROR" for completion.

  Does anyone know what has changed in the Sierra? Or is it my unit?

  Boyfriend of Time Machine does not work with Sierra

  Console is 'redesigned', extraction of newspapers can be difficult...

  But!

  You can copy the lines of command in Terminal to see the logs of Time Machine ("TM on the fly" and "History of TM")

  Since this discussion started I see how activity time Machine Console with macOS Sierra;

  By copying this command (from John Galt) line in the Terminal I can view TM-history-logs for a few days back;

  Newspaper show - predicate "subsystem =="com.apple.TimeMachine"'-info | grep ' upd: (' | cut-c - 1-19 140-999)

  This command line also gives information of a TM running 'on the fly', but after the TM copy I have to put in the line of command again TM start-up for a new copy (I can live with that...)

  By copying this command (from chockosmund) line in the Terminal I see what TM is ding on the fly, but did not get the newspaper story.

  the log stream - style syslog - predicate 'contains a [cd] 'Time Machine' senderImagePath' - info

  This command line is that Terminal shows constantly new TM-logs.

  Thank you John Galt and chuckosmund!

  I have a separate Terminal office-space computer were I can watch how TM is progressing.

  Hope that answers your question.

  Jur Kuipers, Netherlands

• HP Compaq dc7700 SFF PC can be upgraded to support a 2.66 GHz Intel Core2Duo (E7300) processor?

  My HP Compaq dc7700 desktop PC small form factor is equipped with a processor replacement of Intel Core2Duo 2.66 GHz (E7300), Stepping/CPU ID 10676, but I now have a start-up error message: "1801 - Microcode patch error.»  Missing or not valid processor updated Microcode.  "Please contact Hewlett - Packard Company for a new firmware update to support the new processor Stepping.

  (The computer start in pressing 'F1', but performance deteriorated due to invalid processor Microcode Update).

  I sent to HP, but have yet to receive an answer.   (They may have bigger problems right now!)

  The HP documentation for the dc7700 is ambiguous about whether if an E7300 processor would be sustained.  In this regard, the documentation recommends against editing processors more than 95W, but the E7300 is only a 65W processor (exactly the same as the original processor E6300).

  I've updated the PC system BIOS (786E1, Rev 1.16, the most recent available on the HP relevant support Web page):

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en & cc = us & prodNameId = 3232108 &...

  "(mais malheureusement, il semble que Rev 1.16 n'inclut pas une mise à jour de Microcode valide pour le processeur E7300)."

  It seems that I may need to wait and hope that HP will issue a valid and new Update Microcode for the E7300 dc7700 support page.  (With luck, the update of firmware would be included in an update of the BIOS which can be implemented through the windows, not via a legacy floppy!) 

  (I note that Intel provides an easy firmware update, but it is not easy for those who are running a Linux Enterprise operating system.  I am running Windows Vista Business 64-bit).

  This is my first post.  Thanks for all the tips on the problem that I outlined above.

  Thank you Paul and Frank,

  The evidence you presented against compatibility has begun to address substantial.

  Furthermore, it is probably not conclusive in itself, but Intel motherboards with a chipset Q965 (at least the names of the Council containing the string '965') also do not appear to support beyond E6700 processors...

  http://processormatch.Intel.com/COMPDB/SearchResult.aspx?BoardName=DG965SS

  I'd be happy to call my request 'resolved' - has answered in the negative.   Thanks again and well done! to each of you.

  With gratitude,

  Robert...

• April updates are several times installation and configuration

  After using Windows Update successfully for 18 months, starting with the April updates, my computer downloads and installs the updates 12, produced through step 1 and configuration step 2, apparently successfully, restarts and produced through the configuration of step 3, apparently successfully, restarts and shows updates are not configured correctly and reverses all the , I tried half a dozen times, tweaking the settings etc in the meantime and it happens every time.

  WebcamFan,

  See if this sugesstion can help you:- http://support.Microsoft.com/kb/949358 >

  04/25 / 1112:25: 41 pm