Power failure recovery

Similar Questions

• Die file of power failure recovery

  Hello

  After a power outage during the execution of the measure the *. TDM file is broken and shows no data. However the files *. TD0 and *. TS01 are registered one contain data. Is thereany way of recovering these data?

  Is greetings!

  Thank you for the information.

  What you have found, it is an error related to the "Kanalorientierte Speicherung" in DIAdem DAQ.

  I have attached the corrected header which should be able to load binary files correctly.

  The size of block in the header of the TDM is accidentally on the length of the string that is expected instead of the binary block size.

  To determine the correct block size the length in bytes of the values in a single file should be determined.

  In your example:

  40000000 -online 8 + 8 + 8 = 24 (3 float64 values);
  20000000 -online 4 + 4 + 4 + 4 = 16 (4 float32 values)

  If this plant often occure in an environment I would say to turn off the mode 'Oriented channel' as a workaround.

  Sorry for the inconvenience.

  Andreas

• After chaning password on the computer, power failure and it is impossible to create the password recovery disk

  I put a password in a computer and a power failure the stop before I could create a floppy or Flash-back to the top.  Any solutions would be appreciated.

  The computer is running on Vista Home

  Hello

  If you know your password but vista does not read the information below

  http://support.Microsoft.com/kb/940765

  If the front is not the case read this:

  I'm sorry, but the strategy of microsoft in these forums is that without assistance will be given about lost or forgotten passwords

  read the policy at the link below

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/keeping-passwords-secure-Microsoft-policy-on/a5839e41-b80e-48c9-9d46-414bc8a8d9d4

• Startup after a power failure

  Hi people.

  I want the apps that were open when occurs a power failure would not open during the recovery.

  But I can't find where to put in place only.

  Any idea?

  In the Apple Menu, select "restart." A window will appear as shown below. Clear to re - open the windows when you log in. You can now cancel the reboot, unless you want to check that the system works as you would when you restart.

  

• HP 280 G1 (N9E78EA): Partition disappears after power failure, watch now unallocated

  Hello!
  I have a PC
  HP 280 i5 - 4590S G1 / 8 GB/500/DVD-RW/W10P + 7Pro64
  and
  Pro series SSD Plextor 128GB 2.5 "SATA SSD M6.
  
  Partition disappears after power failure, watch now unallocated.
  I tried to use TestDisk to see what was going on. After crossing the 'Analysis' command and deep research, but the partition disappears.
  Any suggestions on what I should do next?

  Your SSD have lost files due to the power failure system sudden. I suggest you run CHKDSK to fix this error. Also remember, if the data stored in your SSD are important to you, then first the software of raw data as WDR pro of stellar phoenix recovery and then apply diagnoses to repair.

• No sound on Satellite a series after power failure

  I had power failure and displays now the peripheral output put no audio.

  I have tried the drivers but not find.

  Any help please

  Is what model? PSA? -??????

  The audio chip may have been damaged due to advanced/power surge, requiring a motherboard replacement.

  Search for C:\TOSAPINS audio driver or download the driver here http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  You can also try a fresh install of windows. back up your data and run recovery now zero for the market. If the audio still does not work, then its most likely a hardware problem.

  Also update the BIOS, but I doubt that would help.

• on a late 2009 MacBook Pro 17IN HD had a power failure, leading to the replacement of the HD now, how do I get the 10. .  OS reloaded

  on a late 2009 MacBook Pro 17IN HD had a power failure, leading to the replacement of the HD now, how do I get the 10. .  OS reloaded

  You have the original installation media supplied with your machine? This would be a way: use the DVD to boot from, format the new hard drive and then reinstall the operating system. You can then update/upgrade to 10.11.

  Other than that, your model was not eligible to have its firmware updated to allow for the recovery of the internet which is the only other way I know - at least the only other way besides a bootable clone, you did before your defective hard disks.

  Computers that can be upgraded to use OS X Internet Recovery - Apple Support

  Do not think to partition/format your new drive first.

• Windows XP SP3 does not start after power failure

  I've known a sequence of power failure while my computer was on. When the power was restored, I couldn't boot into Windows. Windows stops before loading the Welcome screen and hangs. I tried in "Safe Mode" and "Restore Point", but always impossible to load up to 'user account screen '. I am running XP SP3.

  I tried recovery of original windows CD. No joy. I ran chkdsk with the option/r several times and fixboot as well, without success. Help, please!

  Just type fixmbr at the command prompt in Recovery Console.

  For more details, see http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/bootcons_fixmbr.mspx?mfr=true

  Also http://helpdeskgeek.com/how-to/fix-mbr-xp-vista/

• root > \system32/had.dll message after power failure.

  After power failure, I got the above message.  I tried to rebuild the CD system following the instructions Microsoft but still can't het PC to start.  Any ideas anyone?

  Thank you

  Since you didn't say what were these instructions, we do not know what you were doing!

  You need to start the recovery console, run chkdsk r, then /Rebuild. bootcfg The first part can be read here:

  http://www.icompute.info/System_restore_from_xp_cd.htm

  You will need to understand how your PC (you neglected to tell us the make, model and model number!) can boot from the CD-ROM. Then, run the Recovery Console. DO NOT ENTER THE INSTALLER! (If you do, you run the risk to wipe your entire disk clean!) Follow the indications of the above page and then stops after having successfully performed chkdsk/r. In other words, don't do the fixmbr part!

  Then, for the second part, read here:

  http://www.icompute.info/halldll_error.htm

  Restart the PC in the usual way (that is, start with the hard drive) and let us know if you are at the back of buisiness.

• I had a power failure that created a restart of windows vista problem

  I had a power failure that created windows error and cannot start my lap top. I understand that I must save the files & photos before trying to reload Vista in its original configuration... How do I go about backing up since the computer does not load...? How much does it cost if I'm looking for a specialist to backup?

  Hello

  power outages are often the cause of hardware problems

  You can try these methods to save the data

  1 slave the drive in another computer and try to read the data in this way

  2 buy or borrow a pregnant USB hard drive upgrade disk hard inside plug it into another computer and try to read the data in this way

  3. If your equipment is damaged by using Knoppix or similar CD linux to retrieve data won't work because they depend on your working materials

  Read about it, even if it's here

  http://www.Knopper.NET/Knoppix/index-en.html

  4 data recovery experts are very expensive

  You can always do a startup repair disk and try to start windows

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

• Windows 7 starts problems with black screen and the cursor because of power failure

  I'm on a Windows 7 64-bit Home Premium OS. Start-up problems arose after the power failure (accidentally unplugged the charger, the battery was not in place) during a video call in Skype. Accessories attached to the laptop at the time were a Logitech Webcam, a dongle Bluetooth, microphone and headphones.

  When starting my laptop Asus N81VP, he'll go as far as the 'Starting Windows' logo, then I meet a black screen with a mobile cursor. I don't then right click, CTRL + ALT + DELETE.

  I tried the things:

  Start Up Repair = "cannot automatically repair."

  System Restore = no available restore points

  Windows Memory Diagnostic = at 100%, no screen of detected problems, then black with mobile cursor

  Networking Mode Safe Mode/Safe = black screen with cursor mobile

  Activate video low resolution (640 x 480) = black screen with cursor mobile

  Good known Configuration = black screen with cursor mobile list

  Start Windows normally = black screen with cursor mobile

  Please help me. I've had this laptop for less than a year, and it would break my heart to have to re - format.

  You seem to have exhausted most of the options available in such cases, except two:
  D ' log in under a different account.
  -To restore your registry files manually. See below for more details.

  On your heart that could get broken: have you considered using the imaging facility that is integrated with Windows 7? You can find it in the control panel / backup and restore. This is somewhat marginal in the feature and it can be finicky, but it saved my butt several times.

  You can restore your registry files manually to a previous point through the steps described below. The process is complex and requires some careful typing. Ask a computer-savvy friend to help you if you lack experience in this field. Note that it may reset your password to a previous value.
  1. keep tapping F8 during the first phase of startup.
  2. Select repair in the menu that looks like this:
  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode
  3 log in as administrator if you are prompted.
  4. Select repair when prompted.
  5. Select the command line in the menu that looks like this:
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7
  6. identify the correct drive letter for your Windows installation. It could be one drive other than c, but it will not X:. You do this by typing commands
  DIR C:\Win*
  Dir D:\Win*
  dir E:\Win*
  until you find the Windows folder.
  I'll call this "Q:" drive
  7 type these commands:
  CD /d Q:\windows\System32\config
  xcopy *. * Q:\MyRegBack\
  CD RegBack
  dir
  8. review the dates of the software, system, and SAM files. The files created before or after that is your problem?
  9. If they were made before the problem appeared, you can then type these commands:
  copy software / y...
  /y copy system...
  /y copy Sam...
  (the two points are part of each order)
  10. restart normally. If things don't work then you can go back by copying files from the original register of Q:\MyRegBack to Q:\Windows\System32\config.

• I have problems to restart of Yosemite, after power failure during the new backup, and now HD is also blocked.

  I have problems to restart of Yosemite, after power failure during the new backup, and now HD is also blocked.

  I tried the holding of 'command-r' and 'option' to see if the problem can be resolved or try any boot from a boot disk, my old backup, USB function start - but after a slow long process it all just stops.

  There is software on my HD that I don't want to lose by simply reformatting the computer, because I am now in a different country, far from my house, which is another problem of the Apple Store, to reinstall my OS from Yosemite on the www.

  Hey AmnonMikeCohen,

  Thank you for being a part of the communities of Apple Support.

  I understand that your Mac is not start properly after the power went out.  Let's start with resetting the SMC and NVRAM on your Mac and see if he can start from there:

  Reset the management system (SCM) controller on your Mac.

  How to reset the NVRAM on your Mac.

  See you soon.

• There's the iPhone battery chargers 5 that use no electricity.  For use in a power failure.

  There's the iPhone battery chargers 5 that use no electricity.  For use during a power failure.

  Your best bet is an accumulator.  I have one I got on Amazon by EC Tech.  It is a brick, but it will charge my iPhone and the iPad, if the current is cut off.  You just need to load the brick and keep it in an emergency.

• starts automatically after a power failure

  Hello, I use a Macbook pro 8.1 13 "(A1278)"

  I need 'start automatically after a power failure' work as below

  

  Bun, my macbook can't activate this function. I can't find the same box. Check the screenshot below.

  

  I'm looking for the options "start automatically after a power failure".

  This feature appears to be available only for the Mac desktop.

• Since the upgrade to 8.0, when navigation between screens, my computer screen becomes black for 1 second before the screen is redrawn. This happens regularly and is a major nuisance. It simulates a power failure. It does not happen with IE.

  Since the upgrade to 8.0, when navigation between screens, my computer screen becomes black for 1 second before the screen is redrawn. This happens regularly and is a major nuisance. It simulates a power failure. It does not happen with IE.

  Here I answer to my problem: I upgraded my graphics card and the problem seems to have disappeared.