Shut down the system into hibernation during backup execution

Similar Questions

• Hello! I work with the Director 12, Windows 7. A fatal error occurred during my attempt to chance the script police. Now this fatal error occurred whenever I start the Director. I shut down the system and tried again, even failure. What can I do?

  Hello!

  I work with the Director 12, Windows 7. A fatal error occurred during my attempt to chance the script police. Now this fatal error occurred whenever I start the Director. I shut down the system and tried again, even failure.

  What can I do?

  Save the relevant keys, then search your registry at HKCU\Software\Adobe\Director\12\Script

  If this does not help, save the entire branch and try to delete it

• "display driver has stoped working, but was recovered" and then shuts down the system. "

  I have a problem with the opening of my yahoo email because my computer just Bonnac outside and flashes once or twice and says "display driver has stoped working, but was recovered" then shuts down the system. " Itsriving crazy me :(     (I have windows vista & pentium bicoeur.)

  This means that there is a problem with your graphics card. I suggest that to update your Windows and check of course latest service pack installed. Also check Windows problem and Solution Center and see if everything suggested installation listed there. It can make it appear to update your graphic card.

  If this isn't the case, try looking in the card of your gaphic provider or your PC support Web site to update its driver.

• Shut down the system on satellite A30-141

  Hello

  I have a satellite A30-141 and I install XP home, but when copying files, system shuts down...
  I've changed the hard drive and the mem, the same problem...
  Any help?

  Thank you

  Can you please explain this copy procedure specifically? Same thing happens when you play games?

  Satellite A30 is old enough laptop model and it is possible that the laptop is dusty and when copying the material temperature reached the critical level.

  Good bye

• Shut down the system disabled

  Hello

  I created a shutdown task system these instructions http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/how-to-schedule-computer-to-shut-down-at-a-certain/800ed207-f630-480d-8c92-dff2313c193b 
  How can I disable it?

  Access Task Scheduler and delete or modify the task.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/how-do-i-delete-a-scheduled-task/623fbe6e-5de6-477C-97ae-b008c303453a

• iPhoto book card and calendar each shuts down the system

  iPhoto slide show and Album both work normally.  The book features, card & calendar show a loading... indication, but almost immediately the activity stops and no entry except force quit is available.  A problem report is generated.

  A problem earlier with iPhoto had recently been resolved.  The problem and the solution are in the Discussion iPhoto 9.4.3 frequent crashes presented by iGardener December 14, 2015 and involves the removal of two of googlemap and S60v3.rar. html files The used at this stage iPhoto library is smaller... less than 200 photos.

  The above solution made me very happy and grateful for the discussion forum.  I have this post in hopes that I can return these functions of iPhoto.

  Greetings from Jerry-a-Tic.

  A solution to the problem that I reported when I continued to look for Discussions of iPhoto.  Specifically, MattyMiles interviewed on "iPhoto, photo books, calendars, cards of ' back on November 14, 2009.  A recommendation, due to old Toad, the user to verify the "Theme" folder to HD/Library/Application Support/iPhoto has led to a solution for the problem I raised.

  The Themes folder and the database file was, from its date, a new file, apparently created when I reinstalled iPhoto in a vain attempt earlier to solve the 'problem of crash induced Google'.  Fortunately, I had a copy of the folder themes, which turned out to be a backup.  Replace the existing folder and the Themes.db file to the location of the HD , solved problem.  A reboot is not necessary...

  Thanks to MattyMiles and old Toad.

  Jerry-a-Tic

• Someone please post a reply to work for 646 error code that keeps my system tries to install KB976321 and KB981726 every time I shut down the system.

  My system is Windows 7 64-bit SONY VAIO Laptop.  Refuses to install updates that have been referenced because first, they came out.  Attempts to locate the download of the update and try to delete failed.  Can someone tell me where I could find the files? Or provide a fix?  Judging by the number of similar requests, the folks at MS can be perplexed also.  My notebook Win update file is full of (non-plage applications) and notes the failure.

  My system is Windows 7 64-bit SONY VAIO Laptop.  Refuses to install updates that have been referenced because first, they came out.  Attempts to locate the download of the update and try to delete failed.  Can someone tell me where I could find the files? Or provide a fix?  Judging by the number of similar requests, the folks at MS can be perplexed also.  My notebook Win update file is full of (non-plage applications) and notes the failure.

  Hello

  Try turning off your User Account Control first download before the update manually. Here's how to turn off UAC: http://support.microsoft.com/kb/975787/en-us.

  I hope this helps.

  Support engineer

• On request a laptop Dell ' 01 is able to shut down the system "Hibernate"?

  11/04/2012; At said Dell Lattitude running Windows XP. Which method array or specific Hub must this operating agency run, allowing this unit to "Hibernate" (stop) of routine? If this equipment is not 'Standby' within its ' functor or the ability to be administratively correctable, feel free to clarify we above. - Cordial thanks '.

  Eric Urscher.

  * E-mail address is removed from the privacy * .

  http://en.community.Dell.com/support-forums/laptop/f/3518.aspx

  Link is the Forum from Dell for laptops, check here.

• stop ID10T users of abandonment downloads by shutting down the computer or put it to sleep

  Key issue:
  Short of locking all users of the computer, is it possible to use my admin account to stop temporarily to other users of the computer is shut down, put to sleep or into hibernation mode? At least until that I get home from work?

  Explanation:

  Normally, all users should be able to put the computer into standby or turn off the console. I want that way normally. However, I share the computer with other people in the House and must work full time, leave the computer unattended during the day.

  For the last three days, I tried to download a LARGE file from a slow server an approximate time of 6 hours. Oh, to add insult to injury I can't the server let me resume a download. To allow the user to get on the computer while I'm at work and by downloading the file, I used Fast User Switching (name of the XP, in case it's called something different to 7) to put the computer on the Welcome screen, while my regular account download.

  For the past two days, despite myself, leaving a note saying: 'Do NOT stop the computer or put it to sleep', when I got home from work, the computer was off, and the download was incomplete. I got an explanation "you were always telling me to stop when I'm done, I did not forget at this time." Then today I started downloading two hours ago and was only asked "could I please verify my email address?", so I donnГ the computer. When she was done, she put the computer to sleep, which was just as bad as l ' turn off as much as to cancel the download.

  Short of locking all users of the computer, is it possible to use my admin account to stop temporarily to other users of the computer is shut down, put to sleep or into hibernation mode? At least until that I get home from work?

  Hello

  
  You need to be logged in as an administrator.
  
  Follow the steps mentioned below:
   
  (a) open the Start menu, type secpol.msc in the search line and press ENTER.
  (b) to expand local policies in the left pane, and then select user rights assignment.
  (c) in the right pane of the user rights assignment double-click Shut down the system
  (d) select (highlight) listed (s) or group (s) that you will not be allowed to turn off the computer more and then click Remove.
   
   
  NOTE 1: You can press on and hold down the CTRL key to select several listed users and group.
  Click on apply.
  Note 2: Windows 7 Pro and Ultimate have secpol and gpedit.

• with MS XP, when I shut down the computer, try to download the same update again and again!

  and I don't know how to find the updated info?  Help!  It takes 5-10 minutes every time I have shut down the computer.  How to cancel this update which blocks my crt?

  Thank you!

  Julie

  Hi jjackbcop,

  Thanks for posting in the Microsoft Community.

  I understand that you are facing the issue with windows updates offer several times over and over again.

  Method 1:

  I suggest you perform the clean boot and check.

  Place the computer in a clean boot state, then check if it helps. You can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow these steps to configure Windows to use a Normal startup of the link report section to return the computer to a Normal startup mode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfig and click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal Startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 2:

  I suggest you send the link and check (this also applies to windows XP).

  Windows Update or Microsoft Update repeatedly offers the same update

  https://support.Microsoft.com/kb/910339

• Whenever I have shut down my system, I get an error of "nlsphelp.exe".

  Original title: nlsphelp.exe

  Whenever I have shut down my system, I get an error box "nlsphelp.exe". What can be done to fix this?

  See you soon

  The nlsphelp.exe has nothing to do with a virus.

  It's the NetLib SQL Service Helper Service (not found on a general XP installation).

  Now you or you already had versions of SQL Server installed on your system of unspecified of brand and model with the unspecified XP version and Service Pack?

  If not, it may belong to a third-party application you have installed or it might be some something remains either of something that you have uninstalled before this incident.

  If you are not sure whether you need it or not, click Start, run and enter in the box:

  services.msc

  Click OK to open the Services Applet and locate the assistance of NetLib SQL Service Pack Service, right click, properties and after making a note of the current startup type, set the startup type to "Disabled", reboot, run for a while and see how things work without it.

  If you find things that don't work without it running, set the startup type to what it was before and pick up another idea.

  Is it your desire, you can also delete the Service completely so that you will never see it again.

• I put the machine into hibernation and when I restarted, I got a blue screen with stop: 0 x 00000024. Restart gave a different stop error message: 0 x 00000050.

  Original title: Blue screen problems - Stop 0 x 24 and 0 x 50

  I'm not being updated hardware or software on my Dell Latitude D8380.

  I ran the Windows tool to check if the laptop is suitable for upgrading to Windows 7, but did not install any software.

  I put the machine into hibernation and when I restarted, I got a blue screen with stop: 0 x 00000024 (0x001902fe, oxba4f7948, 0xba4f7644, 0xb9d31ae8) ntfs.sys address b9d31ae8 base at bpcef000, datestamp h8025be5.

  Restart gave a different stop error message: 0 x 00000050(0xffffffff,0x00000000,0xba1bef42,0x00000000) i8042prt.sys address ba1bef42 base at ba1b8000, date stamp 48025c 67.

  Please can you help. Thank you, Sue Dixon

  Hello

  Step 1: Check if you are able to boot in safe mode. If you are able to boot into safe mode, and then try to perform the clean boot to safe mode and check.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start and then click Run.
  2. type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

  Step 2: Run the check disk hard disk command. (You will be able to try this step if you are able to start in safe mode or in normal mode with success)

  How to perform disk error checking in Windows XP

  http://support.Microsoft.com/kb/315265

  Let us know the status of the issue.

• Whenever I have shut down my system Windows Vista it makes 5 bets to day and ideas why this is happening

  Whenever I have shut down my system Windows Vista it makes 5 bets to day and ideas why this is happening

  Updates fail for a more likely reason.

  Check if you have errors associated with updates?

  1. Open Windows Update by clicking the Start button, all programs and then click Windows Update.
  2. In the left pane, click view update history.
  3. Find an update for Windows that has failed to install, and then double-click the update to view more information. Updates that have failed to install will display failed under status, next to the name of update.
  4. In the Windows Update dialog box, next to the details of the error, review the error code for the update has failed.
  5. Follow the links in the dialog Windows Update under more information or help and Support to try to solve the problem, then try to reinstall the update by using Windows Update in Control Panel or to display error codes/messages and maybe someone may be able to help others.

  Suggestion:

  How to reset the Windows Update settings?
  http://support.Microsoft.com/kb/971058

• After I shut down the computer, he re boots itself after 5-10 minutes.

  After I shut down the computer, he re boots itself after 5-10 minutes. Weird. I tried to change the settings. Can anyone suggest anything?

  Hello

  1. How did you shut down the computer?
  2. are - it stop with the power button on the computer?

  If so, this causes the computer in a standby / hibernation
  If you shut down properly by clicking on start > stop, then you must wait until the computer is shut down before you close the lid of the laptop.

• How to tell the Scheduler to shut down the computer after completing the task in Windows 7

  I created a task using the Task Scheduler that runs on my computer at 23:58 on Saturday and then back up my PC to my external hard drive from Seagate. That works fine, but I'm not finding a way to have Task Scheduler shut down the computer when the task is completed. I encouraged four hours for the backup must be completed. When I am absent Sunday or more I come home to find the PC always on. I have reviewed the task scheduler management articles and see no way to reach my goal. What should I do? Thank you.

  zigzag42

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you are facing problems using Task Scheduler.

  I suggest you to refer to the suggestions by Aziz N replied on July 14, 2010 and check if that helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/how-to-schedule-computer-to-shut-down-at-a-certain/800ed207-F630-480D-8c92-dff2313c193b

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.