Similar Questions

• I would like to replace a with an equivalent Canon Sigma lens.

  The lens is a Sigma 70-300mm 1:4-5. 6 DG with macro.  Which Canon lens would come close? The body is a T3i Rebal EOS.

  Thank you

  If you are serious about on the side of the fauna of it think the Canon 100-400 L IS lens, or even the Sigma 50-500 OS (kinda big & heavy for hand holding a large part) and read existing threads on the 100-400 & the 400 f5.6. It is a much better scope for wildlife that only 300 mm. You should also consider a good Macro lens for near work place that is not something I do, I'll let the others he made recommendations.

• Sigma 18-50mm F2.8 - 4. 5 DC OS HSM

  Hello. I wonder if this sigma lens (Sigma 18-50mm F2.8 - 4.5 DC OS HSM) would take on my 70 d. Thank you!!!

  Yes, it is discontinued.   You can find them online, or may be used at some of the good reputation of the Photo shops.  If you're really lucky, you can find a new, always on the shelf somewhere.

• LR 6 for Sigma 150-600 contemporary profile

  If I want to activate the profile correction, LR 6.1.1 does not detect my Sigma 150-600 of the contemporary lens.  I have to select the manufacturer of lenses, and is then LR.

  It looks like LR is looking for lens bad data, or the wrong goal data are stored in the image file.

  My camera is a Canon 5 d Mark III with the latest firmware.

  The goal of data displays profile list options drop-down dialog box is "Sigma 150-600mm F5-6. 3 DG OS HSM C015".

  The EXIF data in the image are "150-600mm F5-6. 3 DG OS HSM | Contemporary 015 ".  If I activate the Display Options display the parameters of the lens in the overlay of information, develop, this is what is displayed in LR.

  Anyone know if the problem is the EXIF data, LR does not have the correct information, lens, or something else?  A way to solve this problem?

  Thank you.

  Hi John,.

  Please check the threads below.

  allowing lenses correction for all THE photos during their IMPORT? -Lightroom Forums

  Lightroom 6 not recognize lenses: retouching Forum: Digital Photography Review

  It will be useful.

  Kind regards

  Mohit

• Where are the profiles for Tamron 10-24, 18-250 & Sigma 17-70?

  I have the following are listedin the

  The lens profile support

  http://kb2.Adobe.com/CPS/846/cpsid_84666.html

  However, none of them are shown in the Adobe Lens Profile Downloader 1.0. Why is this?

  How to get profiles of these lenses then?

  TAMRON 18-250mm F/3.5-6.3 DiII A18P

  Pentax

  3.2/6.2/12

  TAMRON SP 10-24mm F/3.5-4.5 DiII B001P

  Pentax

  3.2/6.2/12

  SIGMA 17-70mm F2.8 - 4.5 DC MACRO / HSM

  Canon, Nikon, Pentax, SIgma, Sony

  3.0/6.1/12

  Thank you

  .

  John

  The lens profile Downloader gives you access to the profiles created and uploaded to the server from Adobe by our users. The profiles that you mention are provided by Adobe as part of the Lr3.3, Camera Raw 6.3 and DNG Converter 6.3 installation program. Also, they are not compatible with raw images and will not even visible with Lr unless images are raw. If you don't see them, then there's a very high probability that it is because you have not installed any one of the application mentioned above or your images are TIFF, JPEG or PSD.

• NEX - 5N LA - ai2 with Sigma lenses

  Anyone know if the optical image stabilizer works on the Sigma lenses when it is attached to the NEX - 5N camera using the adapter LA - ai2?

  I discovered that the operating system works.

• Are Apple going to do more L/XL straps/bands up to 250mm?

  Apple will make more L/XL bands/belts up to 250mm?

  No, unless you ask them to http://www.apple.com/feedback/watch.html

• OR 9206 Delta sigma or SAR module?

  Hello

  I intend to use the library of waveform for cRIO OR cRIO 9074. I'm having the NI 9206 C series analog input module.

  The question I have is can I use the example of application of Delta-Sigma or the example of SAR acquisition mode.

  Basically, I want to know if the NI 9206 module is a module of delta sigma or a SAR.

  Appreciate your help.

  Swami HI,.

  9206 is a module of SAR, the Delta-Sigma tend to be 24 bits and they have very fixed sampling frequencies that they can run to, if you can set any rate sampling within a range, so it's SAR.

  See you soon,.

  James

• Function of IRIS with Nex VG20 + Sigma lens

  Hello

  I have a NEX VG20 and a NEX 6. When I use my SIGMA 8-16 + THE - ai2 with NEX 6, everything works fine. On the other hand, with the VG20, the iris does not work and I can only work at full aperture. Is there a solution?

  I still have two other questions.
  With the NEX cameras, the lens correction (vignetting and distortion) is active on the video?
  The video SteadyShot function works with all lenses in the range X?

  Thanks in advance for your answers,

  Paul

  Try to adjust the mode of development on the lens itself, instead of the [FOCUS] button on the camera. There is a M - AF switch near the mount and slide it on m.

  If this post answered your question, please mark "accept as a Solution.

• How to create the sigma notation?

  Hmmm... I need help for the simple creation of sigma notation something like that the 1 in http://en.wikipedia.org/wiki/Summation, under the Capital sigma notation, 2 1.

  THX

  for (imstuck) wrote:

  Here, as it's low I'll post it. But try it yourself next time.

  

• Sigma Tel High definition Codex for Dell 3100

  Sigma Tel High definition Codex for Dell 3100 E310? Reference Dell has this driver? Winows there?

  DonsmithXK

  Hi Don Smith XK,

  1. which version of the operating system is installed on your computer?

  2. what exactly is the problem with your computer?

  You can download Sigma Tel High definition Codex for Dell from following link.

  http://support.Dell.com/support/index.aspx?c=us&CS=19&l=en&s=DHS& ~ CK = mn

• Connection of a drive motor for the FSP Yaskawa Sigma with UMI-7774 and PCI-7344

  Hello

  I have PCI-7344 and UMI-7774 I want to connect to this of Yaskawa Servo motor control.

  (1) how will I know if this drive is compatible with the pci-7344 and umi7774?

  for example: inside the UMI manual is written that the engine must support "Sinusoidal Commutation"

  I look at it the drive motor manual and I can't find anything about.

  It's link to the drive motor:

  http://www.Yaskawa.com/site/products.nsf/products/servo%20Amplifiers~fspsigma.html

  http://www.Yaskawa.com/site/products.nsf/products/servo%20Amplifiers~fspsigma.html?OpenDocument&seq=...

  (2) how to connect lines of control and feedback from the UMI to the engine?

  I enjoy all the help showing a link to a tutorial that allows to understand signals from the motor and encoder

  And also the umi-7344 (Phase A, Phase B, Hall sensor, inhibit, breakdowns, etc...)

  Some powerpoint or Pdf tutorial for National instruments will help as well.

  P.S. I read the manual of the UMI-7774 and pci7344 manual, but I'm not yet understand what I need to do

  in order to configure my system of movement:

  By car (Sigma FSP Yaskawa) PCI-7344, UMI-7774, motor, servo (Yaskawa)

  Thanks for any help.

  Kind regards

  Moti

  Dear Moti,

  At this point I recommend contacting National Instruments of support here.  You can send a request by e-mail and once a technical support representative has responded, you can attach to your document. Don't forget to categorize your request like vision or movement associated with, and I or one of the members of my group will be able to help.

  Best regards

  ~ Nate

• Yaskawa Sigma V

  Who needs the circuits interface to interconnect a PCI-7342 map NOR a Yaskawa SGDV, Sigma-V servo-amplifier.  A brooch to pin suggested would be a start, however, am unsure as traction, stamps, bars, etc., necessary to interface with success

  Chris-

  With the section of wiring from the manual for each component, you should be able to make the connections.  In addition, Yaskawa entered can be sinked or local products, but manuals don't show a way.  Looks like you may need to add a relay to the inhibition of the controller.  7342 voltage output is 5V, but the Sigma needs at least 11.

• Sigma 17-70 2.8 issue with T6S - Liveview no video on LCD screen

  People,

  I need help. I just got a T6S and my Sigma 17-70 2.4 works very well except when I want liveview to try to use the video mode. Or whatever it is will display on the LCD. The lens works very well on my body T5i, including the liveview and video. My other goals seems to work very well on my two T6s and T5i for Liveview...

  Any ideas or help?

  Stilgar99

  Google is your friend.

  http://www.Sigma-photo.co.jp/English/new/new_topic.php?id=514

• a lens EF-S 55-250mm f/4-5. 6. IS STM will work on a powershot sx500?

  a lens EF-S 55-250mm f/4-5. 6. IS STM will work on a powershot sx500?

  Yes, it looks like one of my chipmonks lol

  You can see how it performs your depth of field considerably long distances. Youshouln can't still need in most cases with this power zoom. You might need a tripod unless your super stable.

  It is a generic TV converter I don't see any listed for your model, I have the similar to your SX50HS. I use adapters to mount a 2 X tele-converter that Ive had for a former model Powershot to mine, but only on close shots with zoom, very little.

  I found with 50 X zoom that I don't need.