signature for application Widget

Similar Questions

• EchoSign has a solution for applications that require more than 1 signature?

  We have a form that requires the employee to sign and the prime contractor.  The employee and the supervisor are often in 2 different places.  We want to use formscentral for the form.  We would like the form to go to the contractor for signature before it comes to our Department.  EchoSign has a solution for the form and the signature process workflow?

  If you send a document must be signed by several signatories, you'll want to set the role for different areas. The role is who is allowed to interact with this field. By default, the signers sign in order that their email addresses have been concluded in the To: field. It is important to keep this workflow in mind when configuring the signature fields.

  If you have a signature field, you can define the role of this field (which can be clicked to sign). Right-click on the signature for the 1 signatory field and select Edit. This will open a window where you can set options for this field. Select the signers 1st e-mail address in the drop-down list for the role: field.

  Repeat this step to associate all other fields of signature for the other signatories.

  Please watch this short video tutorial to learn how to create a multi-signataire document:

  https://www.echosign.Adobe.com/en/Misc/EchoSign-how-to-series-sending-to-multiple-signers. HTML

• Code 80070241 in Windows update and "Windows cannot verify the digital signature for this file" when you try to run any program.

  Windows Update has appeared today when we started one of our machines, informing us that there are some installed updates. After reviewing the updates, we clicked on the "Install now" button, and immediately, it failed with the above error code.

  I tried to run regedit a reason unrelated, and it came with a dialog box error with "Windows cannot verify the digital signature for this file. A recent hardware or software change might be installed a file that is signed incorrectly or damaged or maybe it's a malicious software from an unknown source. »

  After researching here and elsewhere on google and did not find anything suitable, put us in the Win7 disk, recovery tools and tried to go back to a previous system restore point (3 days).

  The restoration went well, restarted, but the problem persists.

  Then, we just tried to install anti-malware software, but when trying to run the installer, we get a different error message indicating 'ShellExecuteEx failed; Code 577 "and then the same message on the verification of the digital signature.

  The computer is running fine all yesterday and has worked very well since just after the new year when he has been upgraded to Windows 7. No material changes have been made, and no software changes were made by users in the course of last week.

  The computer is an AMD Athlon II X 4 with 4 GB of RAM on a motherboard Asus M4A78-EM, linking a 64 GB SSD, with a 250 GB drive SATA data/programs. GPU is a Nvidia 260, and it has a CD and DVD player as well. It is connected to our router using the gigabit ethernet interface motherboards.

  It was under windows 32 - bit XP SP3 up just after the new year. When we put in place the new SSD to replace a hard drive older than we have did a new install of XP (slipstreamed with SP3) and then used the upgrade 32-bit W7 Home premium DVD version to upgrade the system. Since then, the system runs flawlessley.

  On the machine is MS office XP, Firefox 3.6.3, AVG 8.5 and a few games such as the Turbine DDO.

  The main user account used to try to solve these problems and to run Windows Update and try installing programs is a member of the Administrators group.

  Firefox works fine, serve, and he plays the games installed very well also. AVG reports to date, with no problems and has detected no threat.

  However, try to view the registry with regedit, or start Viewer event or compmgmt.msc that all do appear the message "cannot verify the digital signature.

  ***************************************************

  Can anyone offer an opinion on what might be wrong with this facility please, and how we could do to solve?

  Cannot run chkdsk/scandisk as he bought the message "cannot verify the digital signature" etc etc.

  This morning, the machine began to behave differently - stop playing back badly, refused to start Device Manager, open Control Panel correctly etc.

  So, I reset the BIOS to boot from the CD-ROM, slapped XP SP3 in reinstalled, then upgraded to Win 7 again.

  Still have no idea what caused the problem, but it seems to be gone now - reinstalled the same applications, AV / programs anti-malware, games, etc and everything seems to go fine now.

  * shrug *.

  Computers.

• host of the print driver for applications stopped working 5100cn

  I don't know if my previous attempt at this post went through...

  I've recently upgraded to an SSD and a new installation of won 8.1 (exactly the same thing I had on my old HDD) and now when I try to print from my Dell 5100cn I get the following error:

  Host of the print driver for applications has stopped working

  Signature of the problem:

  Problem event name: APPCRASH

  Application name: splwow64.exe

  Application version: 6.3.9600.17480

  Application timestamp: 545871c 1

  Fault Module name: dlpsc51r.dll

  Fault Module Version: 0.3.1281.4200

  Fault Module Timestamp: 4324d 269

  Exception code: c0000005

  Exception offset: 000000000000cd 87

  OS version: 6.3.9600.2.0.0.768.101

  Locale ID: 1033

  Information additional 1: 1 has 72

  More information 2: 1a7236b9868d6b38d3fd37b43ff05b06

  Information additional 3: 269 b

  Additional information 4: 269b7fc9d660b4191041ae78f0745b83

  For the life of me I can't figure out what I'm doing wrong... The printer still works fine if I swap back to my old HDD so I know its something I do (or not do)... I tried to figure this out all day and have installed several drivers in normal mode and compatibility without result.

  When I open devices and printers on the old drive HARD the printer name reads "Dell Laser Printer 5100cn PCL6" but when I check the devices and printers on my new SSD it reads "Dell Printer 5100cn PS"... So, I know that I do not want to install the same as I have done before and I can't understand what I installed... I use a Toshiba Satillite P75 A7200 if that matters...

  Help, please

  Hi Roydub83,

  Thanks for writing on the Dell Community Forum.

  Please uninstall all the printer driver on the system installed for Dell Laser 5100cn printer and then install the driver on Windows 8 using this link http://dell.to/1ETptNA. Install in compatibility mode if the installation does not engage.

  Answer please if you have any other questions.

  Have a nice day ahead.

• Error downloading: digest of invalid signature for main manifest file assigns System.exit unauthorized calls!

  Hello fellow sufferers!

  I am trying to download my first application at BB appworld. While trying to download the file * .bar, I get this error:

  Digest of invalid signature for main manifest file assigns System.exit unauthorized calls!

  What does this errormessage?

  It's my MANIFESTO. MF file:

  Archive-manifest-Version: 1.1
  Archive-created-by: BlackBerry Tablet OS Elf BAR Packager 1.3.1

  Package-Type: application
  The author of the package: -.
  Package name: de.helex.clipmanlite
  Package version: 1.0.2.0
  Package-Architecture: armle-v7
  Package-author-certificate hash: _QCY8j3bSpt-67mhJLED-4xZooXxA7vZBMu2MbHI97SYlh5aoRxaHi44Ie-WMfh9-AGPG2YnwlW7X-AJ-A7xPQ
  Package-author-Id: gYAAgEPQ7F7MvQXnpyTXcW_b9KQ
  Package-Id: gYABgFYDI7fyWoGVx88_tVwB_Ic
  Package-Version-Id: gYACgHvOOTEXtanI-HRmZlA82u8

  Application name: ClipManLite
  Application Description: Clipboard Manager
  Application version: 1.0.2.0
  Request-requires-system: Tablet OS/1.0.7.0
  ID of the application: gYADgFZI5L0DEfspLgVvaOJ8kK0
  Application ID-Version: gYAEgIravTIRSld3gfNygimA3qI

  Name of the entry Point: clipmanlite
  Entry point: QML_IMPORT_PATH = app/native/import QT_PLUGIN_PATH = native/app/plugins LD_LIBRARY_PATH = lib/native-app app/native/clipmanlite - blackberry - platformpluginpath ./app/native/lib/platforms platform
  Entry-Point-Type: Qnx/Elf
  Entry-Point-icon: native/icon.png
  Entry-Point-Splash-Screen: native/splashscreen.png
  Entry-Point-focus: auto
  Entry-Point-System-stocks: run_native

  Archive-asset-name: native/clipmanlite
  Archive-asset-SHA-512-Digest: EgIFzXisCdbgWHASq7sSPYjSDWRzzl77_hw-TYnopqUjV9JDbRORwzCruReZOG2iq3SQv-Yi50NcD7XPHqz_Jw
  Archive-active-Type: Qnx/Elf

  Archive-asset-name: native/icon.png
  Archive-asset-SHA-512-Digest: MFqIlfKgqTrhI3yZkGZyv0l1YUubJblUMc6mhcZuhJfktqX5x-NwfWL7m-McGoKUMjgCTbFBSW1e3voCcZoBGg

  Archive-asset-name: native/splashscreen.png
  Archive-asset-SHA-512-Digest: CNzXgezPb8oKHCJ_4Zqk2_Fb1D6tkMVGEn3mhPQFRD7REdRG0ZnELLdu0gkM1pVvyObc0bH2ouv84_QwJ7kuLg

  Archive-asset-name: native/lib/libQtCore.so.4
  Archive-asset-SHA-512-Digest: 9gnZ149YG3kPs8ZFbHoZ6kFrL5dj4yW40urXd-uZPDrif0zYMzI29TUsp794U4GBiQUXaKKlbZOWUqIZlEHI9A

  Archive-asset-name: native/lib/libQtGui.so.4
  Archive-asset-SHA-512-Digest: EgYpcFf7xItFiqQ_PDm8FFVFu5vdbIrg4-h2d3sB-3FfPuAlnZasR_UQ45yNxzZoIwowtdaNVstIvVZXd7j1AA

  Archive-asset-name: native/lib/libQtOpenGL.so.4
  Archive-asset-SHA-512-Digest: is9HkVzh6mFpVs0N7LkYCH1Aps3pt-Q20XHP37jLnLPnoME4kl3hl9sCkCU1XCm-PchfoX51GxjMS9wBkSuMgA

  Archive-asset-name: native/lib/libQtNetwork.so.4
  Archive-asset-SHA-512-Digest: pP6tPwXFGmFQnYTuHn80aFV7xh8pG4y6wOWIIvGGlp4UXl570Gq5W3lbOuCGtCQKyPwPLc7bVOPuK3Ur8hf6SA

  Archive-asset-name: native/lib/libQtDeclarative.so.4
  Archive-asset-SHA-512-Digest: W2wS_9_9Cqqqio2w6251fhFnxnQm4ZY2COFm5xQQVCQwcMCvly2KmGxVruZO2yc_WN65MGeEOvH4cAAt1rOznQ

  Archive-asset-name: native/lib/libQtSql.so.4
  Archive-asset-SHA-512-Digest: 7H8cJrn5yhG3p4K3G4oYO8XWr_D_AZcLD5T9Zfn6mc8lUiyJ4o6mXouXmFC9imoMeUmq4KsTVM2AdhZStXA7gQ

  Archive-asset-name: native/lib/libQtSvg.so.4
  Archive-asset-SHA-512-Digest: dJk9FYrRJGqPeaEG17LWTKC_ogV6Few2BzK4t-WlcXUg0MJxinKp5jigsCHzFm6SJiFJLHDj3jRS16bTV12qgQ

  Archive-asset-name: native/lib/libQtScript.so.4
  Archive-asset-SHA-512-Digest: 809rAuYFWIOxeJuNJcL63URoMKXz6NKrmKOfZZWDjPUVqTJkxL7tBr_joHZR-EVY1mSJ8wBbh64iB6YdbqTmUg

  Archive-asset-name: native/lib/libQtXmlPatterns.so.4
  Archive-asset-SHA-512-Digest: zVw6F43U2TKa3dbYosygRliRlhdNisb-sdBmzh6AgTyh9GlVCkLLBie781GpQLA-uOyKpDOoT5B6N8h4ulaCBw

  Archive-asset-name: native/lib/platforms/libblackberry.so
  Archive-asset-SHA-512-Digest: uEdFgiXdWMo3MV5szE5vn2EcVXxubMZl4e71PT4z614ONV2ZqcFKzf6CFGzV9mwQGlWKm5Jrra71I2fzASnurw

  Archive-asset-name: native/blackberry - tablet.xml
  Archive-asset-SHA-512-Digest: mzIshm0x0oBMW7T-SlYg5ywvgFSeeHSyx53kkvzaf - WQWDtkbxqqXDldjCQrvYv631_2Q6OCAiYOmZRoslsYg

  Any ideas what could cause this error?

  First I thought maybe it's because the same mistake: what to do if your Package ID was rejected by BlackBerry App World

  But the creation of a new element of product does not help with this problem.

  It is a native application of qml Qt. It does not store the files, need to no write access and uses only simple, free of components created 1.0 QtQuick with no additives. So, it should be the best portable application out of my small collection.

  Unfortunately I have no real device here since I, like many of you, to present one of my tablet at BB App World Applications, first to get a.

  Google was not my friend on this topic, so I hope someone has this kind of error message and could tell me what could bring it. Any kind of advice are welcome.

  Best regards

  HELEx (Ambassador of Qt)

  FYI, a new simpler command allows to sign the 1 step:

  BlackBerry-sign - storepass .bar

  P12 both RDK of passwords must be the same, but this measure will apply to both the two signatures. It should have the same results as the command that you run.

  Kind regards

• How to quit an Application Widget

  Hello

  I read on

  Event application object

  In BB widget api docs. I tried gently to the widget by trapping the output between the use of javascript functions. I used the sample code of script written in the doc.

  I added the feature element in the config.xml file.

  But nothing happens when I get out of the application with the button exit on Simulator.

  Did you call trapForApplicationExit() from somewhere? Just put this code example in your script will not as magically turn you call trapForApplicationExit() - probably of any function you have written to handle the load of the document.

  Note that you need to activate two features for the above script at work - blackberry.app and blackberry.app.event. Also remember, as I just said in your other thread, as if the script/page is served from a remote server (instead of being local for the widget), you will need to have the feature elements contained in the element of relevant access.

• Signature for Tablet App keys

  Hi all

  I have blackberry signing key for blackberry smartphone applications. can I use the same set of keys of signature tablet apps also? Or do I need to get a separate set of keys to signature for Tablet Apps?

  Hey white,.

  Yes, you must get a separate set of keys for the signature of Tablet OS. You can get the keys here:

  https://www.BlackBerry.com/SignedKeys

  Good luck!

• Update Win7 failure: error control of digital signature on applications

  I just upgraded my satellite L300 with DVD Toshiba Vista Home premium "s (Dutch version).

  Step 1: update Toshiba DVD deleted all drivers as promised
  Step 2: Windows 7 Home premium Upgrade DVD installed without problem.

  Step 3: Upgrade Toshiba DVD won't start help following (translated from Dutch) error:
  Can't control the digital signature for this file.
  A recent hardware or software change has probably installed a file with a wrong or damaged digital signature...

  Apart from some basic Windows (IE) programs I can't run, install, or remove all other program-always this error...
  Other utilities (wifi for example) just give the message they encountered an unknown error...

  I tried to update some drivers on the Toshiba site but not a downloaded file monkey runs... (all with the same digital signature error)

  What now?

  Edit:

  I got, I think, to install the drivers of Toshiba in safe mode, but many programs fail to run, install or remove even...
  anything that gives the signature error... (ccleaner, revo uninstaller, also all the Setup files downloaded after installation of 7)

  Touchpad will freeze now and if often, leaving only Ctrl-Alt-Del to reboot the computer

  Post edited by: FelixAtagong

  So apparently no one can help me...

  I found a solution to disable the verification of digital signature in Windows 7, but for that you have to open CMD as administrator.
  Guess what, same CMD refuses to open, because it does not recognize the digital signature...

  How to turn off this thing until I throw my PC in the trash...

  Post edited by: FelixAtagong

• HP Notebook: Remove black search box that says - start typing to search for applications, files and settings

  Remove the black search box that says start typing to search for applications, files, and settings

  Can someone tell me please how to permanently delete this search field that keeps appearing in different applications that I use?

  I have windows 10 on a HP laptop. Often when I'm working in an application and I move the cursor on the screen, this search box - start typing to search for applications, files, and settings - appears. I tried several times to turn it off, but I do not just because I can't seem to get rid of it.

  I would like it removed permanently or turns off permanently so it is not continue to block my view of the application, that I'm trying. Any suggestions would be greatly appreciated.

  Thank you.

  Terry20

  @Terry20

  Found this.

  Click on the Start button and select settings.

  Then select devices.

  Click on the mouse and touch pad and scroll down and select 'extra mouse Options '.

  This will open a box that should have the information and the name of the type of touchpad has your computer.

  Click on settings and then in the new box that opens, you should see a tab that says 'Tapping '.

  Open this tab and you should see 'Three finger Tap' and 'four finger Tap.

  Clear the check boxes, and then click 'apply '.

  REO

• The new XP installation error. The signature for the family Windows XP Setup is not valid. The error code is fffffc0d

  I'm doing a fresh install of Windows XP Edition family on a new hard drive.  I get the same error message indicating that the product catalog can not be installed. I reformatted and retryed with the same result. I tried a different HARD disk, but got the same trouble. I also tried installing XP Pro after a reformat and got the same error. The first error window says "the signature for the family Windows XP Setup is not valid. The error code is fffffc0d", and the second says" error: the system cannot find message for message number 0xfffffc0d text in the file for syssetup.dll fatal error messages: Setup failed to install the product catalogs. " Any directive or ideas would be greatly appreciated. THX

  Hello

  I suggest you try the steps from the link below and check if it helps.

  http://support.Microsoft.com/kb/307153

  Hope this information is useful.

• 0xc0000428 error - "Windows cannot verify the digital signature for this file."

  Original title: 0xc0000428 error

  I'm using Windows Vista and I already had the problem, "the Windows Boot Configuration data file is missing required information" which I have rebuilt the bcd for. Now it won't let me not restart due to the error 0xc0000428, stating "Windows cannot verify the digital signature for this file. How to do this?

  Hi Rajisace,

  ·         How long have you been faced with this problem?

  ·         You did it last changes before the show?

  ·         Please provide us with the file information in the error message.

  Method 1: Try to start the computer using the last good known Configuration and check if you can successfully start.

  Using the last good known Configuration

  http://Windows.Microsoft.com/en-us/Windows-Vista/using-last-known-good-configuration

  Method 2: I will suggest you to do material clean boot and check to see if you encounter the same problem.

  1. right click on my computer-> properties

  2 Hardware tab Device Manager->

  3. right click on the sound card, video card and NIC, one by one, then click on turn off

  4 restart the computer.  If the problem is resolved, you can then enable the devices one by one to find the exact mechanism causing the problem

  After you find the device that is causing the problem you can solve by installing the latest driver or replacement of the unit.

  I will also propose you to check if the boot priority is set on hard drive and check if you experience the same problem.

  Method 3: Check a drive for errors

  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  Important:  If all available hard disk data can be lost when running chkdsk, as the chkdsk attempts to repair the affected area.

  Hope this information is useful.

• Status: 0xc0000428 Windows cannot verify the digital signature for this file.

  This is the message that appears:

  Windows Boot Manager
  A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source.
  If you have a Windows installation disc, insert the disc and restart your computer. Click 'Repair your computer' and choose a recovery tool.
  Otherwise, to start windows, so you can investigate further, press the ENTER key to display the boot menu, press F8 for Advanced Startup Options, then select last known good. If you understand why the digital signature cannot be verified and want to start Windows without this file, temporarily disable driver signature enforcement.

  status: 0xc0000428

  Info: Windows cannot verify the digital signature for this file.

  * So what the hell is happening? Sorry, but am getting very frustrated by that. I noticed that windows creates a file called windows.old. Avoid the old windows, it's an empty hard disk, and it was an installation of full version. NOT an upgrade. As to why my product key does not work... not even me angry by publishing what I've seen elsewhere in these forums. I DO not pay another $200 for a different product key. This one should work. I just opened this "thing" to do the installation. So if this key was stolen, it was stolen that microsoft has packaged discs.

  Can I safely delete this file called windows.old (assuming that I can always go back to windows 7)? Do you think this has nothing to do with the problem? Or should I do what ppl do upgrades mean that they have to do... Reinstall win 7?
  * He let me use F8 for advanced options to disable the driver signature.

  Thank you! Got the product key problem is resolved. I saw on another post, you stated

  
  "The start menu with EasyBCD by NeoSmart Technologies edition should solve your problem, it provides a graphical front-end to the BCDEdit Command line that makes it easy for you to set the boot settings and change the entries start on the new window manager.

  http://NeoSmart.NET/DL.php?id=1   "

  Now that address my other question as much as me have allowed difficulty delivers windows boot is seen? I see that windows 7 is a file boot.ini as previous versions of windows. I would like to see the "command-line" some win 7 has instead of boot.ini file uses. I suspect something may be there that causes the driver signature error... and tried the 'bootrec' methods above doesn't solve anything for me.

  Thanks a lot for your help in this matter. (Once I get the verify signature driver disabled it goes straight in win 7 and win 7 works fine.) It just will not be disabled whenever I start my pc. I always have to fight to get the window that gives me the ability to disable.)

• Windows cannot verify the digital signature for the drivers required for this device

  I get this error from a specialized device that uses a usb/network card connection built-in.  It is with windows 7 Home premium.  Now I know that the source of the driver.  It is the latest driver and labeled for use with Vista.  I need to override this security check, so I can use this equipment.  It is an integral part with me a living. It is likely absolutrly nothing wrong with the driver.  I downloaded from many sites without modification.  This equipment worked well under Vista.

  Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source. (Code 52)

  I found the answer by looking for other sites, it's probably here somewhere as well.  Restart the computer.  During restart, press "F8".  Select Disable Driver Signature Enforcement in the start menu.  This fixed the problem of driver in my case.

• Windows task manager looks completely wrong-it has no tabs for applications, services, processes, performance and put in a network, just a box of size rectangle TASKS WORKING ON?

  The Windows Task Manager seems completely wrong - it has no tabs for applications, services, processes, performance and networking, just one size rectangle box SHOW the TASKS of WORKING ON?  I use it all the time close process and close programs stuborn. None of these options are CURRENTLY available? The only thing I can think is I went to delete one of my readers WD3.0 data and he says it has been used by another program and I've had that happen before and just go close a lot of the process by typing Control, Alt and delete which opens the windows task manager. I recently changed "System Configuration'under'msconfig" Normal startup to "selective startup" and reduce the number of drivers and programs loading to 'Start Up', as he ran 90 things and slow start. "" "» I have no viruses or malware. I changed the "system configuration" back to normal + restart and that he would remove the progams, or processes that have been intefering with the Western Digital HD software. THIS IS WHEN I FIRST NOTICED WINDOWS TASK MANAGER HAS BEEN SCREWED UP.

  But I can't because my Windows Task Manager is just a rectangular box with a single word to the top sayingTASKS!  Without tab with all the other options as in (program, process, services, performance, and network management).

  Would BE AN INTELLIGENT PERSON please TELL ME WHAT TO? I don't want to do a system restore , as I just cleaned it all points this week and just started around and added a bunch of programs and data this week that I let go.

  PLEASE HELP ME TECHE AND MICROSOFT. I PAY $250 p/year FOR THIS DELL ALIENWARE MACHINE LOADED due to it's PERFORMANCE AND THEY WILL NOT ANSWER (1) DANG SOFTWARE ISSUE WITH what THEY ARE PAID. THEY WANT $60 - $100 OR MORE TO ANSWER THIS QESTION FRENCH ANOTER. THEY USED TO, WHEN I COULD BUY GOLD SUPPORT BUT THEY SELL ON THIS MACHINE, SO I'M ON MY OWN AND THANKS FOR THE ADVICE LIKE THIS...

  The Microsoft Support web site.

  The task manager has two different views. For the display that includes menus and tabs, double-click the border of the Task Manager window. To return to the view without menus and tabs, double-click anywhere in the border around the tabs.

  We won't have the information mentioned in the first response of Sandsweep.

  (I confirmed Microsoft's answer worked.) I must have clicked on the edge of the window Task Manager to have switched over to the second, less familiar view.)

• What is the limit of memory for applications Webworks? Our application does not have to charge 50% of the time.

  * This question is memory of the Z10 device only Webworks *.

  We have looked EVERYWHERE and can not find an answer updated this! Also went through all the documentation.

  We have created several games using HTML5 which has great sound and special effects.  Only problem, is that we have heard that some people have had memory problems with applications Webworks.

  The game that we were about to publish has a 12 MB download size, but uses a 32 MB total memory. The script JS itself is only 800ko but are resources which are both loaded into memory to 12 MB, but an another 20 MB are generated on the plan procedural as the user through the levels.

  It worked fine in the Simulator about 3 / 6 times, with the other 3 times drawing a blank screen. We have not tested on a device yet. The game is flowing on the desktop browser 100% of the time.  We assume that failures of loading in the card sim is due to problems of memory?

  What is the total maximum memory allowed use for applications webworks? I heard that it's much lower than native applications.  We have a great game that has been in high demand for awhile now and it is very good for Blackberry players who pay for games - but unfortuntaely I'm not sure if we can publish now.

  There are 10 BlackBerry applications that exceed 1 GB in size and a very high memory usage. based on your numbers I do not plan to be a problem.

  As a general rule, if an application causes the operating system to run out of memory, the operating system will start cleaning things upwards (starting with the offending application) to free up resources. This will result in the application of closing; not a white screen.

  As a general rule, if you see a white screen on startup, it means that there was an error in the JavaScript code when loading.

  Did you by chance has created a debug version and connected Web Inspector to monitor for errors when starting?

  You use frames? BBUI.js, etc. ? If Yes, can you confirm that you expect for the event the window.load event * before * trying to access the document or WebWorks APIs?