Windows Media Center error: signature of the problem of additional information about the problem

Similar Questions

• Windows Media Center ERROR: "some of the files needed to play radio or video are missing or corrupt." In Vista x 64

  It was working fine last week and now I get this error in Windows Media Center, "some of the files needed to play radio or video are missing or corrupt.
  Record of components Windows Media Center may have failed. »

  HUH?

  I use Vista x 64.

  I looked this error and ran sfc/scannow in administrator mode.  It took about 15 minutes and he said that some errors have been found that cannot be fixed.  I can NOT open the log file to display errors, because when I find it and click on it, it says "access denied."

  The basis going on, and made the Windows Update, I just ran on 13 April to break and corrupt something?

  I fixed that by returning to NVIDIA 196.21 driver version.

• I have a problem with an error in windows media center: ERROR VIDEO files needed to display video are missing or corrupt.

  The error is: ERROR VIDEO files needed to display video are missing or corrupt.

  I Run Setup and restarted my computer at a later date.  I've always been unsuccessful.

  Can anyone help. Thank you

  Update your graphics card driver. Visit the manufacturer's Web site to download and install the latest graphics driver. Once proceed as follows: -.

  You must uninstall and reinstall the tv tuner card driver.

  1. start.

  2. in the start search box type:devmgmt.msc and press the Enter key.

  3. scroll sound, video and game controllers and expand it.

  4. right click on tv tuner card and uninstall it. Uninstall the device as software driver.

  5.reboot.

  6. visit the manufacturer's Web site to download and install the latest update and compatible tv tuner card tv tuner driver.

  7. now open Windows Media Center and re-run the whole upward.

• XP Windows Media Center error "Application has generated an exception could not be treated.

  XP Windows Media Center error

  My windows Media Center continues to send this message whenever I try to open it.

  Application has generated an exception could not be treated. Process id = ox1cc4 (7364) thread id = 0x1cb4 (7348)

  I gives me the ability to run the JIT debugger and when I try I get this message.

  Registered JIT debugger is not available. An attempt to start the JIT debugger with the following command resulted in an error code of 0 x 2 (2). Check the settings of the computer.

  Cordbg.exe 1A 0x1cc4

  Hello

  ·         You did changes to the computer before the show?

  ·         You have the latest updates of Windows installed including the Service Pack 3 for Windows XP?

  Try the following.

  a. close Windows Media Center.

  b. Click Start. Click Run, type cmd in the Open box. Press enter.

  c. type each command mentioned below one after the other and press enter.

  Regsvr32.exe atl.dll

  C:\WINDOWS\eHome\ehSched /unregServer

  C:\WINDOWS\eHome\ehSched/service

  C:\WINDOWS\eHome\ehRecvr /unregServer

  C:\WINDOWS\eHome\ehRecvr/service

  C:\WINDOWS\eHome\ehRec.exe /unregServer

  C:\WINDOWS\eHome\ehRec.exe/regserver

  C:\WINDOWS\eHome\ehmsas.exe /unregServer

  C:\WINDOWS\eHome\ehmsas.exe/regserver

  d. restart Windows Media Center.

• Windows media center error starts automatically at windows startup

  Original title: windows media center error

  my computer is a windows update on its own and I rebooted several times and each time windows media center begins with the little blue label in the middle of the screen. an error appears and says to close the program, when I click on that it does nothing the blue box is still n the middle of my screen and the rest above all. How can I stop start started wen I can't go to the application at all?

  Hello

  1. are you able to boot to the desktop?

  2. what happens once the computer is restarted, it automatically restarts or are you to force the computer to shut down?

  If so, then start the computer in safe mode and disable the option run program at startup.

  Method 1: Disable the option run program at startup

  a. on the screen start, navigate to tasks, click settings, click general, click Startup and window behavior and then uncheck the Windows Media Center start at Windows startup.

  b. click Save to save your changes.

  I also propose to consult the sites listed below:

  http://windows.microsoft.com/en-US/windows-vista/Stop-a-program-from-running-automatically-when-Windows-starts.

• Windows media center is missing from the start menu

  We have windows vista home preium reinstalled on our computer because the old hard drive is faulty, when we go in the menu start Windows media center is not in the start menu and when I run a search so that it can not be found, it is installed as I can start it up if I go to the visitor center and click the icon it How do I get it back on the start menu.

  Hi rgren,

  Navigate to the folder C:\Windows\ehome, right click on the file ehshell.exe (Windows Media Center) and choose "PIN to Start Menu". It will be called ehshell.exe, but you can rename it to "Windows Media Center" If you want to.

  I hope this helps.

• Security Suite blocking Windows Media center to connect to the Extender

  I was initially a little happy home network with an xbox 360, a wired router and my pc under Windows 7 ULT(64bit) Norton 360 AV. During my AV license expires, I downloaded the version of my ISP (Norton Security Suite 4) to replace.

  Now I can't Media center to add or discover the Extender. I added to Windows Media Center svchost.exe to the list of permitted programs, but it doesn't have the thing.

  In help on the xbox live forums, suggestions are to work with the Windows Firewall not Norton. The Norton software has a different interface for the administration of the rules and I saw not a place where you can designate which programs can access which ports. And half of the programs listed as Qwave, Remote Desktop etc, I can't even find the interface of Norton.

  If anyone knows or has worked this issue before Norton Security suite please respond when you can. Thank you

  Hello

  You can try the steps below and check if that helps.

  (a) in the main window of Norton Internet Security (Protect computer, privacy), in the network pane, click settings.

  (b) under smart firewall, in line with program control, click Configure.

  (c) in the control of the program window, click Add.

  (d) in her select a program dialog box, locate the executable file for the program that you want to add.

  (e) click Open.

  (f) in the program control window, select the level of access that you want this program to have

  You can also check out the link below and check if that helps to allow access to the Media Center Extender.

  http://www.Microsoft.com/windowsxp/mediacenter/Extender/Setup/Firewall/Norton.mspx

  Also follow the link given below for more information on non - Microsoft Firewall

  http://www.Microsoft.com/Windows/Windows-Media-Center/learn-more/Extenders/help/Extenders-firewalls.aspx

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Media Center tells me that I have sm not connected to the internet, but I'm out of windows media center I can access the internet. Why?

  Windows Media Center tells me that I have sm not connected to the internet, but I'm out of windows media center I can access the internet. Why?

  Disable the firewall and check the connectivity in media center.

• All of a sudden no sound in Windows Media Center, video playback. No problem with the same files in media player

  My windows media center vista has all of a sudden start to turn off randomly and restart by itself, about 3 weeks ago.  Now, he has lost his.  When I'm going through orders, no sound.  Video games, no sound.  I can still get sound for mp3, but not video.  I can play the same video in media player without any problem.  Can anyone help?  I have Vista Ultimate, service Pack2.

  Hi Doramon,

  Welcome to the Windows Vista answers Forum!

  What are the file extensions you are trying to play?

  This could happen because some of the types of files supported by Windows Media Player are not supported by Windows Media Center.

  To check the file types supported by Windows Media Center please visit the below given link:

  Types of files supported by Windows Media Center

  http://Windows.Microsoft.com/en-us/Windows-Vista/file-types-supported-by-Windows-Media-Center

  You can also try and run the System File Checker tool. This would be in repair of the system files that may be damaged.

  Scan SFC enforcement procedure:

  1. click on the Start button

  2. on the Start Menu, click all programs followed by accessories

  3. in the menu accessories, right-click on command line option

  4. in the drop-down menu that appears, click the "Run as Administrator" option

  5. If you have the User Account Control (UAC) enabled, you will be asked permission before the opening of the command line. You simply press the button continue if you are the administrator or insert password etc.

  6. in the command prompt window, type: sfc/scannow then press enter

  7. a message is displayed to indicate that "the analysis of the system will start.

  8. be patient because the analysis may take some time

  9. If all the files need replace SFC will replace them. You may be asked to insert your Vista DVD for this process to continue

  10. If all goes although you should, after the analysis, see the following message "Windows resource protection not found any breach of integrity.

  11. once the scan is finished, close the command prompt window, restart the computer and check.

  This would take care of the issue that you are facing.

  For more information, please visit the below given link:

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista

  http://support.Microsoft.com/kb/936212

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problem: Windows media Center Configuration connection to the digital cable box.

  I have HP Pavilion Elite with Windows Home Premium.  How do I get the library to accept the signal from the digital decoder (without additional I.R.).  The signal passes through fine using the S-video input, change channel with the cable, but 'Set up' box control requires I connect "I.R. Blaster (?) covering the cable box sensor which then beats command of other devices (television, etc.) using the cable box.

  Hi M.G.Nichols1945,

  What is the exact message that you receive?

  You can follow the steps mentioned below to setup windows media Center without using hardware IR (infrared):

  1. open Windows Media Center and go to tasks > settings > TV > Setup TV Signal

  2. click on Yes to the question that appears.

  3. click on the default settings in the wizard until you get to the option where it asks if you want to configure your signal automatically or manually.

  4 choose think I will manually configure my TV Signal

  5. Select antenna; Choose analog only antenna after you go through this return to TV settings and click Finish.

  6. now, you should have your installation center media without the use of IR material. You must use the cable box to change channels

  You can follow the instructions of the manufacturer of your computer to set up your Digital Cable Ready tuner. So that the Digital Cable Ready tuner receive cable content, your computer must be a specially identified Digital Cable Ready computer.

  For more information, see the link below:

  Set up a TV signal in Windows Media Center
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-TV-signal-in-Windows-Media-Center

  TV on your computer: understanding signals TV and TV tuners
  http://Windows.Microsoft.com/en-us/Windows-Vista/TV-on-your-computer-understanding-TV-signals-and-TV-tuners

  Solve problems with watching TV on your computer
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-watching-TV-on-your-computer

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have problems setting up Windows Media Center TV Tuner to the Canada.

  I live in the Canada. I have Windows 7. I tried to set up my TV Tuner (for cable-vision, not Internet TV) in the 'Windows Media Center', but there is no "Canada" on the regional list to download my local channels. How do I pass this roadblock?

  Because your computer is 5 years old I guess that TV Tuner came not from IBM. However if that were the case IBM ccontact. If she has not contacted the manufacturer of the TV Tuner. The driver name must match the name of the TV Tuner. You can try to download a driver with your computer. Make sure that your Tuner is connected to your computer. Go to configuration panel, Device Manager, expand "Sound video and game Contolllers" Double click on your Tuner, select the driver tab, click on get updated driver, follow the prompts.

• Windows Media Center has stopped updating the lists Guide for Windows 7

  Windows 10 will go out the next Wednesday July 29, 2015. I have Windows 7 and I have technical problems with the Guide in Windows Media Center lists. This isn't updated Guide lists and I wonder if this problem is related to the upgrade of Windows 10?

  I called a technician to answer Microsoft desktop and the technician fixed my computer errors. Unfortunately, he could not fix this problem. Even though I always reset and auto update of listings in the Guide, the result will prove be the same with "no data."

  Windows Media Center has given me many error messages:

  Windows Media Center

  "Windows Media Center has corrected a problem with your registration data and will download the Guide even once. You should review your records to make sure they are always planned properly. »

  Failed to download

  "The new TV configuration data could not be downloaded. Existing data, if any, will be used as you continue by configuring the TV signal. »

  Downloadable guide is not available

  "Downloadable TV Program Guide listings are not available due to previous failures of download. For more information, right-click on the Windows Media Center system tray icon and open Windows Media Center update log. Select back to try again. You may be able to get the TV show lists, if they are available. »

  Guide download error

  "The Guide could not be downloaded. For more information, then Windows Media Center system tray icon right-click and open Windows Media Center update log. »

  I can watch TV on the computer using Windows Media Center and manually record TV shows, but it is difficult for me to record TV shows without ads Guide on Windows Media Center.

  Note to update (as of August 2, 2015):

  The Electronic Program Guide (EPG) for Windows Media Center Guide ads was already programmed by zap2it until July 21. After July 21, zap2it is no longer can update the lists Guide for Windows Media Center.

  July 23, Rovi Corporation's new Electronic Program Guide (EPG) for Windows Media Center Guide ads.

  From 23 July, listings in Windows Media Center Guide is running back to normal for Windows 7 users.

  My Guide Panel is equipped with a selector more [on the listings in the Guide] where is the expiration date. I hope that Microsoft does not support Windows 7 WMC.

  Please don't waste your time trying to solve the WMC, it is the expiration of the license that is causing the problem. I know it's frustrating.

  On the other hand, is - can anyone say with certainty that WMC is available on Windows 10? No charge for the upgrade to Windows 7?

  The way I see it, not providing the function of key in W7 WMC guide is motivation upgrading to W10, assuming that WMC is available.

  Hopefully Microsoft will give us the fix for WMC in W7.

• Window Media Center, error code:-2146959355, could not record show. Live TV does not work. Help?

  Hello

  I'm having a problem with my Windows Media Center. It worked perfectly without any problem since I built the computer more than 6 months ago. I have not changed anything, the only thing I've done recently is set up a homegroup on my local network using this computer. Except that nothing has changed.
  A show is set to record every time, I get the error code. Also, I can't watch live TV. Help, please!
  Thank you.

  Check the event viewer.
  http://Windows.Microsoft.com/en-in/Windows-Vista/open-Event-Viewer

  Run the Setup again.

  Open WMC > tasks > settings > General > installation Windows Media Center > rerun the installation

  Does that help?

  If the above does not help then try to reset WMC: -.

  Open Control Panel > uninstall a program > turn Windows features on or off > scroll multimedia features > uncheck the box against Windows Media Center > follow the instructions on the screen > Reboot > open again to turn Windows features on or off in the control panel > scroll multimedia features > check the box against Windows Media Center.

  Now reconfigure WMC again.

• Windows Media Center error C00D1199

  I used a program called BandiCam save games/windows on my Windows 7 computer. I recently upgraded to a 2 TB HARD drive and transferred all my files to the new disk. None of the Windows files were transferred by my request and now Windows Media Player cannot read the. BandiCam AVI files. I've read that it could be the Codecs of compression used by Bandicam however until I transferred all my files he was running fine records. I tested on my laptop with the same file, and it worked fine as well. Is there a debug/repair for Windows Media Player program? Or could I just re - install completely? It always shows the error code: C00D1199

  Hi Oliver Vakomies,

  Follow the steps in the link to fix the problem:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-pictures/Windows-Media-Player-error-code-C00D1199-when/c9db74a9-21eb-48d2-AE00-cc8137ab9c37

  http://Windows.Microsoft.com/en-in/Windows7/C00D1199

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-pictures/Windows-Media-Player-11-Vista-Home-Premium-x86/1c472db0-D51C-4bba-baf7-f8ebde659949

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/Windows-7-Media-Center-video-error/2449c753-db70-422A-B67D-ca1d40677b2a

• Vista x 64 - Windows Media Center - error: invalid Application. Unable to launch «»

  After a new installation, with two Service Packs included and all other updates and software, clicking on Netflix in Windows displays the following error message, "invalid Application. Unable to launch ' ' '.

  Silverlight is installed.

  Netflix works on IE and Mozilla.

  I had tried all the solutions listed here and came away empty-handed. For some reason, the update is applied to Windows Media Center via the Update window fails to properly install the Netflix plugin. I even contacted Microsoft Support who told me that I would have to pay $99 that the solution could take over an hour to solve.

  I solved it in 5 minutes.

  http://download.Microsoft.com/download/D/D/8/DD8BD495-9A5A-46DB-B95E-A846AF35915E/NetflixInWindowsMediaCenter.exe

  My friends this is the link for the download of the plugin directly from Microsoft. After you install everything worked dandy.