startuprepairV2 with signature of the problem 01: autofailover__
I have windows vista. Do not start with repair unable to resolve the startup problem. PC just loop around Startup Repair continuously to try to restart again. System Restore does not work and "last good configuration does not work either. Gone through all the options available on the screen, without success, so now completely blocked. Vista installation disc supplied with the machine.
The problem is listed as:
Problem event name: startuprepairV2
Signature of the problem 01: autofailover
Signature of the problem 02: 6.0.6000.16386.6.0.6000.16386
03:6 problem signature
Signature of the 04:1638424 problem
Signature of the problem 05: no cause root
Signature of the 06 problem: no cause root
Signature of the problem 07:0
Signature of issue 08: 1
Signature of the 09 problem: System Restore
Signature of the problem 10:0
OS version: 6.0.6000.2.0.0.256.1
locale ID: 1033
Any ideas?
How to do a startup repair disk:
Download the ISO on the link provided and make a record of repair time it starts.
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.
When you have changed that, insert the Bootable disk you did in the drive and reboot.
http://www.bleepingcomputer.com/tutorials/tutorial148.html
Link above shows what the process looks like and a manual, it load the repair options.
NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.
Read all the info on the website on how to create and use it.
http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
ISO Burner: http://www.snapfiles.com/get/active-isoburner.html
It's a very good Vista startup repair disk.
You can do a system restart tool, system, etc it restore.
It is NOT a disc of resettlement.
And the 32-bit is what normally comes on a computer, unless 64-bit.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
How to get Vista recovery Media or the Vista recovery Partition on your computer back to factory settings.
There is no Vista free download legal available.
Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.
Normally, they do this for a cost of $ small.
In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.
See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.
Normally, you have to press F10 or F11 at startup to start the recovery process...
Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.
Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.
They will tell you how to do this.
Every computer manufacturer has their own way of making recovery disk/s.
Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
A good Vista DVD contains all versions of Vista.
The product key determines which version of Vista is installed.
There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.
If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu
http://support.Microsoft.com/default.aspx/KB/918884
MS advice on the conduct of clean install.
http://www.theeldergeekvista.com/vista_clean_installation.htm
A tutorial on the use of a clean install
http://www.winsupersite.com/showcase/winvista_install_03.asp
Super Guide Windows Vista Installation
After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.
See you soon.
Mick Murphy - Microsoft partner
Tags: Windows
Similar Questions
-
Signature of the problem 05: AutoFailover
Having a problem with Windows 7
I turned on the machine and everything worked normally. I had to go out for a few minutes and when I got home my screen was empty, but the machine was still on. After checking all the cables, I stopped the power and tried to reload. Function returned monitor but machine entered the Startup Repair. Startup Repair couldn't fix. I tried to restore with no luck. I tried a few suggestions on the forum and no luck. I get the following message:
Signature of the problem
Problem event name: StartupRepairOffline
Signature of the problem 01: 6.1.7600.16385
Signature of the problem 02: 6.1.7600.16385
Signature of the problem 03: unknown
Signature of the 04:21201026 problem
Signature of the problem 05: AutoFailover
Signature of the 06:23 problem
Signature of the problem 07: CorruptFile
The system version: 6.1.7600.2.0.0.256.1
Locale ID: 1033
Any help would be greatly appreciated.
Hi Gary,.
Thanks for posting your query in Microsoft Community.
I appreciate the efforts made in the patches that you tried. From now on, I would ask you refer to the suggestions in the article below and check the status.
Why my screen is black when I start Windows 7?
Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.
-
I play world of warcraft and use a program called ventrilo to talk with other players. the problem I have is my game sounds can be heard.
Vista makes my headphones 'speakers', so when I use a program called ventrilo to talk with other players in my game sounds are heard through ventrilo. My headset is a headset/microphone generic plug-and-play.When I run not WoW, I can hear my own voice through the headset speakers when I talk.
I want my headphones to work so I can hear my friends talking and the sounds of the game, but I don't want the game sounds to be filtered on the server for voice chat
Any help would be much appreciated. I asked the same question to Geek Squad and their response has been to try to charge me $49.99 + tax for one of their "agents" can remote in and fix it. Do not use them unless you have: P
Hey CassiusVa,
Welcome to the Microsoft Answers Forum!
Since when are you facing the issue?
Can I know the version of Ventrilo you use on your computer?
It may be that World of Warcraft focuses on your audio hardware. You can try to reduce the audio settings in WoW to see if this makes the use of Ventrilo better. It may also be a driver problem. I would check to make sure that you have the latest drivers for your audio device.
Use the following steps to ensure that the audio drivers are up to date.
1. connect to the Internet.
2. click on start and enter the Device Manager in the start search field.
3. click on the plus sign next to sound, video and game controllers.
4. right click on the name of the sound material and select software update of the driver...
5. click on search automatically for a driver updated and wait for Windows to update the driver software.
6 Windows checks a remote Web site to see if the update of the driver software is available.
* If an update is available, let Windows install the update.
* If an update is not available, proceed to the next step.
7. once the update is successfully installed, test the microphone.
Please follow the steps below and check if you still have questions echo.
Go into Ventrilo Setup and select mixer for the sound card, which will be the audio input (as determined by the "Input device" option) device. This will populate the Mux and line options. Normally it would take only a Mux. It is possible that you may have many options of the line. Go ahead and select "Microphone" or anything that is appropriate for the input line and then click OK.
This should solve the problem.
Please note that you select mixer, mux and line will allow the "Hardware Volume" slider This gives you the control hardware on the audio input signal and is the best way to control how strong you are. Setting the cursor to halfway better seems to work for most people, but it will be hardware and system load.
You can also browse the links for more information on ventrilo and try to contact them if the problem persists.
http://www.Ventrilo.com/FAQ.php
http://www.Ventrilo.com/about.php
http://www.Ventrilo.com/dlprod.php?id=1
Let us know how it works.
Kind regards
Technical support of Microsoft-yama.
Visit our Microsoft answers feedback Forum and let us know what you think. -
Description
Signature of the problem
Additional information about the problem
original title: Windows Media Center in Windows 7 Home Premium
then, it looks like some Windows Update is causing a problem.Two options-1 do a restore and immediately go into Windows Update and change the setting forDownload, but let me choose what to install. Then install the updates oneuntil you find the one that breaks the system. Do another restore, turn offupdates and when one appears that is the problem, right-click and thenSelect HIDE this update. Let us know what is the update.2. you can go in Panel, programs and features, see the installed updatesSort by date and uninstall the updates one at a time until you find bad.Then set Windows Update to download and install not and notified on theupdates, right-click to hide. Let us know...BarbMVP - Windows/entertainment and connected homePlease mark as answer if that answers your question -
im a student in Visual design and currently I'm designing with Arabic typography, the problem is when I type the letters in photoshop are not connected. I tried many ways, but it seems that its does not work!
Help, please
Hello
I tried many ways, but it seems that its does not work!
What have you tried? In preferences > Engine Options choose text (try Middle Eastern)
Or select your text box and in > 'Characters' Panel, choose your language.
Stone
-
It, s a Dell Vista. (Initially WINDOWS 7). Does not start. Comes with Startup Repair tool.
System restore failed, damaged, registry problem Signature 07: No O, s installed.
Choice 1 or q: beep.
Check memory problems: no problem dedected, goes back to the Startup Repair
Help
Hello
1 have had any changes made on the computer before the show?
2. What is the full and exact error message?
3. How have you tried to do a system restore?
Method 1:
I suggest you to refer to the article and see if it helps:
Windows Vista or Windows 7 unbootable, and the Startup Repair tool does not resolve the problem
http://support.Microsoft.com/kb/934540
Method 2:
Check the link and see if it helps:
Pick up the pieces after a computer crash
http://Windows.Microsoft.com/en-us/Windows-Vista/picking-up-the-pieces-after-a-computer-crash
Let us know if it helps.
-
More information about the problem:
BCCode: 116
BCP1: FFFFFA8003FC44E0
BCP2: FFFFF8800FFD2230
BCP3: 0000000000000000
BCP4: 0000000000000002
OS version: 6_1_7600
Service Pack: 0_0
Product: 768_1
Files helping to describe the problem:
C:\Windows\Minidump\122809-22526-01.dmp
C:\Users\Owner\AppData\Local\Temp\WER-41667-0.SysData.XML
The upgrade in the hope of resolving a problem, it's rarely a good idea.
Bug Check 0 x 116: VIDEO_TDR_ERROR
Bug VIDEO_TDR_ ERROR control has a value of 0 x 00000116. This indicates that an attempt to reset display driver and recover a timeout failed.
[Source: http://msdn.microsoft.com/en-gb/library/aa469184.aspx]I suspect that you need an update of the graphics driver or a new card chart or food to cope.
In any case this has nothing to do with Windows Update. Post here to get help: http://social.answers.microsoft.com/Forums/en-US/w7hardware/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
What should I do to actually solve the problem? APPCRASH. The problem is the host process for Windows Services has stopped working
Hello
1. when exactly you get this error message?
2. don't you make changes to the computer until the problem occurred?
I suggest you to try the steps below and check if it helps.
Method 1: Try to put your computer in a clean boot state, and check to see if the same problem happens.
By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.
How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
http://support.Microsoft.com/kb/929135Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.
Also, you can access the event viewer on your computer and check the newspaper of windows for messages/error codes important related to the question and after return from errors in the event viewer.
See the link below for more details:
What are the information contained in the logs of the event (Event Viewer)?
http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer
Hope this information is useful.
-
Problem event name: APPCRASH
Application name: Explorer.exe
Application version: 6.0.6002.18005
Application timestamp: 49e01da5
Fault Module name: comcasttb.dll
Fault Module Version: 5.0.8.138Can someone help me with this error? I ran a SCAN SFC, but because that explore does not work I can't the CBS.log.
Fault Module name: comcasttb.dll
Fault Module Version: 5.0.8.138Hello
the comcasttb.dll file is the cause. Delete the file C:\Program Files\comcasttb\comcasttb . dll.
André
"A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/
-
successful registration with one of the problems with other sources
Hello world
I have two icecube_cur_ownr and icecube_his_ownrpatterns.
I can access these two SQL schemas, Toad. The TNS entries are as follows
icecube_cur_ownr =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = xxx.xx.xx.xx) (PORT = 1521))
(CONNECT_DATA =
(SID = PRIMARY)
)
)
icecube_his_ownr =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = xx.x.xx.xxx) (PORT = 1521))
(CONNECT_DATA =
(SID = CADS)
)
)
Also I'm able to save icecube_cur_ownr as a source and successfully import the tables in OWB via design center
problem is with icecube_his_ownr. During the registration process, when I try to test the connection it pops me an error in the results of the tests
ORA-12170: TNS:connection timeout exceeded
Ignoring the error, I went to import the tables and the error message popped up is as follows
SQL exception
Exception error: SQL Reporsitory
Class name: cacheMediator
Method name: getDDentry starting from DB
Repository error message: ORA-12170: TNS:connection timeout exceeded
You wonder why the connection is successful for a source, otherwise the other that I followed the same procedure for both cases.
Could you please guide me to solve this problem.
Thank you very much
SridhHello
It is different because you connect to diffferent PRIMARY = instances.icecube_cur_ownr, icecube_his_ownr = CADS.
Have you used the same TNS-entry to connect with the CADS by sqlplus? If you have several oracle_homes you are not really sure what the owb tnsnames.ora uses.
Then search for other files tnsnames.ora on this machine and check the entry for icecube_his_ownr. May differentiate them.
Or use the host/port/Service method to create the source location to icecube_his_ownr, not the option of tns.
Kind regards
Detlef -
Re: Satellite A200 with Windows 7 - the problem with the card reader
I upgraded to windows 7 and now my card reader does not read some of the maps. I installed windows vista (utilities SD) card readers drivers but I can't install the flash cards support utility. in the installation is displayed: "serial number is invalid '.
What can I do to solve my problem?Thank you and sorry for my English
Could you give a product number? The product number is located on the underside of your laptop and looks like this for example: PSAE6E.
Post edited by: Osman
-
With regard to the problem of the window
Hello
I have a laptop HP Pavilion 2226tu g6 window 8 series. And now, I had installed in Window 7 Ultimate.
But I was unable to install in the pilot of this window.
YouCam not working do not?
-
Signature of the blue screen problem
This continues to occur several times a day. Had a virus deposited in the register but removed.
Signature of the problem
Problem event name: BlueScreen
OS version: 6.1.7601.2.1.0.768.3
Locale ID: 1033
Additional information about the problem
We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.
You may be able to get the DMP files without crashing by booting in SafeMode (F8) with networking.
If you are overclocking stop. (chances are if you are unsure if you are, you are not) a
To allow us to help you with symptoms BSOD on your computer, download the contents of your folder "\Windows\Minidump". We need at least 2 FILES DMP to diagnose and confirm
The procedure:
* Copy the contents of \Windows\Minidump to another location (temporary) somewhere on your machine.
* Zip up the copy.
* Join ZIP archive to your message by using the button (attachments) "trombone". (if available on your site, MS has this)
* Please download to a service like Skydrive or "Rapidshare" to share files and put a link to them in your answer.Link to find out how to download below.
http://www.WikiHow.com/use-SkyDrive
To ensure the minidumps are enabled:
* Click Start, in the search box, type: sysdm.cpl, press ENTER.
* On the Advanced tab, click Startup and recovery... Settings button.
* Make sure that automatically restart is unchecked.
* Under the writing debugging information header, select image partial memory (256 KB) in the list box drop-down (varies from 256kb).
* Ensure to that small Dump Directory is listed as % systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.
Please also run MSinfo32 and download the output as well.
To run MSinfo32 please go to start > run > MSinfo32
Go to 'file', 'save' and download the PDF is saved with the DMP
System specs are extremely useful then please include everything you know. -
Just replaced main hd, reloaded win7 and spent the last days of torque tuning system and now the 2nd today a system crash: blue screen. thought with a new disk and memory, which was bad, new W7 and meticulously careful re - build I have no breaks down for awhile. Any thoughts on this, and of course, all the solutions?
Signature of the problem:
Problem event name: BlueScreen
OS version: 6.1.7601.2.1.0.256.4
Locale ID: 1033
More information about the problem:
BCCode: 19
BCP1: 00000003
BCP2: 8579FDE8
BCP3: 8551FDE8
BCP4: 8579FDE8
OS version: 6_1_7601
Service Pack: 1_0
Product: 256_1
Files helping to describe the problem:
C:\Windows\Minidump\022313-22125-01.dmp
C:\Users\INTL1\AppData\Local\Temp\WER-34265-0.SysData.XML
Read our privacy statement online:
http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409
If the online privacy statement is not available, please read our offline privacy statement:
C:\Windows\system32\en-US\erofflps.txt
Hi Al Adams,.
Welcome to Microsoft Community where you can find the answers related to Windows.
As a pet the description provided, looks like you are facing a hard time with the Windows 7 operating system.
BCCode: 0 x 19 00000019: this could be drivers programs antivirus/antispyware/security and other materials are also likely causes. Update of the great drivers and BIOS would be the best plan of attack. If we must also try to uninstall your antivirus/security as a test.
Note: Changing the BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.
I suggest you to use Driver Verifier to identify issues with Windows drivers for advanced users:
http://support.Microsoft.com/kb/244617
Using Driver Verifier: http://msdn.microsoft.com/en-us/library/ff554113(v=VS.85).aspx
See the steps in the following Microsoft article and check.
Resolve stop (blue screen) error in Windows 7
http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7Notes:
Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.
When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.
Before you perform the upgrade on the spot, I would recommend you to back your files using windows backup.
Keep us informed on the status of the issue.
If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.
-
Signature of the Acrobat Pro DC problem
Signature of the problem:
Event name the problem: APPCRASH
Application name: acrord32.exe
Application version: 15.8.20082.15957
Applications of time stamp: 55960b 88
The name of the module with an error: acrord32.exe
Fault module Version: 15.8.20082.15957
The module error stamp: 55960b 88
Exception code: 40000015
Compensate for exceptions: 000dfb9d
OS version: 6.1.7601.2.1.0.256.1
Language code: 1049
Information additional 1:7196
2 for more information: 71966aa44fc90d07542da354f1126cf0
For more information, 3: 9 a 61
For more information, 4: 9a613412be2432f1284ee0e39530abfa
Read our privacy statement online:
http://go.Microsoft.com/fwlink/?LinkId=104288 & clcid = 0 x 0419
Hi artjt,
Questions for users confronted with this question:
1. do you have the preview pane enabled in file Explorer?
If so, you can temporarily disable it to see if the problem goes away?
On Windows 8, in Explorer, go to the view tab, and if you press the button "Preview Pane", UN-press it.
On Windows 7, upwards to the right (to the left of the help icon) there is a button "show preview pane." UN-press it.
2. ensure that the following directories exist on your machine. If this isn't the case, please create them:
C:\Users\USERNAME\AppData\Local\Adobe\Acrobat\DC\ToolsSearchCacheAcro
C:\Users\USERNAME\AppData\Local\Adobe\Acrobat\DC\ToolsSearchCacheRdr
Replace USERNAME with your username.
Is - do this 1 or 2 to solve this problem?
Kind regards
Nicos
Maybe you are looking for
-
I lost my icon game Center
-
What I also watch videos on Picasa albums. Used to work properly
I used Picasa Albums for years with firefox. Now when I go online my photos show very well but my videos show a white screen with "INVALID PARAMETERS" in the Center. I show that my programs are updated. Google Help Forum suggests that I turn to googl
-
Firefox has several tabs start open - what are they for? How to kill?
I seem to have several tabs immediately under the URL of the browser and located above the page tabs. Each says starting (0). I have no idea) 1 how they landed 2) what they are; and (3) how do I get rid of them. Help appreciated! lelu
-
Mac Pro (early 2009) Analog Audio Line-in for Airplay?
I have a stereo receiver and the turntable connected to my Mac via the analog line in port. The incoming audio signal is visible in the input Audio Pref Pane. Is it possible to listen to this audio on Mac? Is there a way that audio to device Airplay
-
my screen suddenly nour on the side. How can I restore it?
my laptop screen went sideways. How to do it right to the top?