Silverlight on a Mac shows not installed when you try to create an album in FireFox

Similar Questions

• I get the message when I DPLAY.dll not installed when I try to play a newly downloaded game.

  original title: DPLAY.dll

  Hello

  I get the message when I DPLAY.dll not installed when I try to play a newly downloaded game. I downloaded DirectX and nothing helped. Any help would be great!

  Thank you

  You can't try to play Doom95 would you? What is the name of the game?

• Could you please let me know if Flash Player will inform a user that its system requirements are not enough when you try to use a version of Flash Player?

  Hello

  Could you please let me know if Flash Player will inform a user that its system requirements are not enough when you try to use a version of Flash Player?

  Concerning

  It depends, but generally, no..

  Guidelines for the minimum system requirements are especially on what we and won't fix the bugs for.  Flash Player probably works on Windows Server 2000 and we will not intentionally break it or prevent you from installing, but we will also not fix it if it breaks.  In cases where it will crash on launch or some other out-of-box horrible experience, like trying to install on a Mac PowerPC, then we will prevent pure and simple installation.

• Error blue screen STOP: 0x0000007e. I powercycled the sys, unable to choose for sure (keys do not work when you try to select a mode) sys is trying just to go back to the blue screen. Help, please

  STOP: 0x0000007e (0xc000001d, ox8537008 0xba4c3508 0xba4c3204) and the system would not come to the top.

  Error blue screen STOP: 0x0000007e. I powercycled the sys, unable to choose for sure (keys do not work when you try to select a mode) sys is trying just to go back to the blue screen. Help, please

  Symptoms: Booted computer, loaded the raid drivers and showed at the start screen XP for half a second then to BSOD with a Stop error Code 0x0000007E - see also a lot of users (0xC0000001D, 0 x-, etc.) as well.

  Solution:

  1 boot from your Windows XP CD and start the recovery console. You may need to press F6 while RC loads in order to load the SATA drivers. you will have a prompt c:\WINDOWS to the console.

  2. type: CD $NtUninstallKB977165$ \spuninst (it's the update, I had to uninstall to get out of the boot loop, other updates can be uninstalled by changing the name of the directory to $NtUninstallKBCODE$, where KBCODE is the code KB)

  3. type: BATCH spuninst.txt

  4. type: exit

  Don't forget to configure your system to boot from the HD before resuming. I hope this helps. Saved me a lot of hassle today.

  -Tom Steele
  http://www.hawkandtom.com Tom Steele

• Windows Live Mail freezes and goes to not responding not to when you try to print an e-mail message

  Windows Live Mail freezes and goes to not responding not to when you try to print an e-mail message. I t comes up with unicode UTF-8

  It print a page of test very well and also printed from Notepad and word fine

  Scott

  Hi Scott,.

  (1) if it works well before?

  (2) remember to make changes to the computer before this problem?

  (3) what is the complete error message you receive?

  Method1: The computer in the boot and a test to see if you can print

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  If the problem persists, you can post your query on the Windows Live Forums for more expert help

  Windows Live Forum -http://windowslivehelp.com/

  Thanks and greetings

  Ajay K
  Microsoft Answers Support Engineer
  ---------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think

• my camera is not recognized when you try to shoot teathered into lightroom, I spin el capitan, someone knows how to solve this problem

  my camera is not recognized when you try to shoot teathered into lightroom, I spin el capitan, someone knows how to solve this problem

  Return to the previous MAC OS until it's resolved.

  Lightroom and El Capitan | Mac OS 10.11

• I run pc photoshop CS6 on my windows 7 (mac). I have stupidly? the Applications Adobe Manager to update all my Adobe apps. Since that time I now get the following error message when you try to create the Contact Sheet II in my SP6 or 64 PS5.5

  Greetings

  
  

  I run Photoshop CS6 on my windows 7 Ultimate (MacPro 2008 via Bootcamp). 12 GB of ram, 512 on the video card. A lot of disk space. None of the questions of knowledge, viruses, malware, etc.
  

  
  

  I have stupidly? the Applications Adobe Manager to update all my Adobe apps. Since that time I now get the following error message when you try to create the Contact Sheet II in any of my SP6 or PS5.5 64-bit or 32-bit versions. «Cold is not complete the plug of command because Photoshop was unable to locate the plugin JavaScript» Re, I installed the latest update, but no change. My installation is built on CS4 extended, then with a version Standard 5, 5.5 and 6 facilities upgrade.

  
  

  The Contact Sheet function was working well, until I ran the updates.
  

  
  

  I'm in a bad place, as I am in the middle of multiple projects, everything I need to create Contacts for.  I thank any help or give advice on how to fix this...
  

  
  

  Help, please!

  Try to run Photoshop with the SHIFT key is pressed and skip loading part tird plug-in and try to use the Board contact II.  A version of plug-ins from third parties have been known to break Photoshop Scrippting.

• Windows Media Player 11 says disc not empty when you try to burn

  When you try to burn on my home computer with Vista and also computer work with XP, two media players say that the disc is not empty when you try to burn and put back a white disc.  Sometimes, it will finally work after multiple attempts; sometimes not!

  Hi doodle75,

  You try to add data to a multisession CD - R or CD - RW in Windows Media Player 11?

  If you attempt this task, this problem occurs because Windows Media Player 11 does not support multisession recording. You receive this message if the CD you are trying to record already contains data.

  To resolve this problem, save the data to a new CD - R or CD - RW.

  Reference:

  You are prompted to insert a blank disc when you try to add data to a multisession CD - R or CD - RW in Windows Media Player 11

  http://support.Microsoft.com/kb/930370

  Error message when you try to burn data to a DVD-RAM disc in Windows Media Center in Windows Vista or in Windows Media Player 11: "insert media".

  http://support.Microsoft.com/kb/927814

  Please see the link below for more information

  Burn a CD or DVD in Windows Media Player

  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player-frequently-asked-questions

  Solve problems in Windows Media Player

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-in-Windows-Media-Player

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• C drive is not visible when you try to defragment

  Original title: errors of Volume disk, drive C is not visible when you try to defragment drive C in the maintenance of the system

  I tried to do a regular defrag of my C drive and received a message that there is Volume disk errors. The utility asked to reboot the system and clean the C drive. But when I access the defragment utility, drive C is not present there to use the application... suggestions?

  Hi Dante62,

  I suggest trying these steps provided below and check if the problem is resolved.

  Step 1:

  a. right click on the c drive.
  b. Select Properties.
  (c) under the Tools tab.
  d. Select Defragment now under defragmentation.

  Step 2:

  Try the SFC scan on the computer.

  SFC/scannow is a very useful command that you can use in any version of Windows. When the SFC (System File Checker) command is used with the/scannow switch, the tool analyzes all the important files of Windows on your computer and replace if necessary.

  Check the link for more information on CFS below mentioned scan.

  http://support.Microsoft.com/kb/929833

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• I recently got 'Class not registered' when you try to open my PDF files. This didn't happen before the last 2 days

  I recently got 'Class not registered' when you try to open my PDF files. This didn't happen before the last 2 days

  Hi Meenakshi,

  Thanks for getting back to me. The problem is solved now. We had to reinstall Acrobat DC who, for some reason, had disappeared.

  Regards, Randy

• Sorry, this content is not allowed when you try to post in the PL/SQL forum.

  Hello
  
  Also the command SQL and reserved words, the formulations used by my request.
  about 37 contained lines:
  
  row_cnt, rec_cnt, disc_amt, item_id, tmp_tot, amount, PMI.
  
  Am confused as to what word/s was considered at fault.
  
  can send the contents of any message to the moderator for verification?
  
  Concerning
  Zack
  
  Published by: Zack.L on July 25, 2010 17:20

  Ah, I see John "440bx - 11 GR 2" figured out that the word problem was "discount" on the sorry, this content is not allowed when you try to view.. (I replaced the "c" by "& #99;" here to avoid the same fate.)

• I get "an error occurred, please try again later" when you try to view videos youtube on Firefox, but no problems on Chrome

  I get the error: "year error has occurred, please try again later" when you try to view videos youtube on Firefox.
  I tried to use Google Chrome and everything's good about it.

  Things I've tried:

  • Clearing cookies, history etc.
  • Removal of cookies.sqlite
  • Re-installed a new Firefox
  • Re-installed Flash Player 14
  • Get rid of Flash Player 14 and returned to Flash Player 11

  None of this has worked.

  I get the error for all videos to youtube every time, it is not a random phenomenon.

  I'm really frustrated by it because Firefox is my favorite browser and now I am forced to switch to Chrome.

  If you live in India then see:

  • http://www.medianama.com/2014/07/223-World-Cup-2014-472-websites-including-Google-Docs-blocked-in-India-following-Sony-complaint/
  • http://www.nextbigwhat.com/Delhi-High-Court-orders-block-Google-Docs-several-websites-297/
  • http://delhihighcourt.NIC.in/dhcqrydisp_o.asp?PN=119642 & YR = 2014

• When you try to create a system image, receive the error code 0 x 81000019

  Get the error code when you try to create a system image on a 900 + GB hard drive with 900 GB of free space. Keeps telling me that there is not enough space to create the image of the shadow. I'm trying the disk image has only 40 GB of data. What is going on? Using Windows 7 64 bit Pro.

  Many hours of searching the Web for answers about a year ago, said that relatively few people have this problem and proposed solutions in the forums have been complex, machine dependent and seem to fail for most of the people who have tried a fix...

  So when I gave up and called Microsoft... they told me to take my problem to anyone assembled my computer...

  The man who built my machine told me not to worry, simply store all my files on the cloud, as he does...

  So now I store my important stuff on a spare drive, we have installed in the box, go to live with the inability to make appropriate backups and restore points...

  All my old computers is standard backups without any hassle... Just this new machine with Win7.

  (The only "new" thing was a disc SSD C... can't believe it would make one difference either, other than speed... and many people use them in 2011...)

• Error no valid identifier when you try to create a trigger

  Hi all
  
  I get this weird error when you try to create a trigger. Basically, it updates a table of different relationship on INSERT or UPDATE.
  
  The error I get is:
  * PL/SQL: ORA-00904: "cid": invalid identifier *.
  

  SET SERVEROUTPUT ON
  CREATE or REPLACE TRIGGER UPDATE_REL_TABLE 
       AFTER INSERT OR UPDATE ON XF_PROJECT_CODE
  FOR EACH ROW 
  DECLARE
       customer_count NUMBER;
       n_cid NUMBER;
  BEGIN 
       -- CHECK if company exist
       SELECT COUNT(*) INTO customer_count FROM XF_CLIENTS WHERE UPPER(client_name) = UPPER(:NEW.company);
       
       CASE 
       WHEN customer_count > 0 THEN
            -- GET CUSTOMER ID
            select t.cid INTO n_cid FROM XF_CLIENTS t WHERE t.CLIENT_NAME = :NEW.company;   // ERROR HERE!!
            
            -- UPDATE relationship table
            INSERT INTO XF_CLIENT_CODE_R (PROJECT_CODE_ID, cid) VALUES (:NEW.project_code_id, n_cid);
       
       ELSE
            -- customer does not exist
            n_cid := XF_CLIENTS_SEQ.NEXTVAL;
            
            -- Create client
            INSERT INTO XF_CLIENTS(cid, client_name) VALUES(n_cid, :NEW.company);
                 
            -- update relationship table
            INSERT INTO XF_CLIENT_CODE_R(project_code_id, XF_cid) VALUES (:NEW.project_code_id, n_cid);
            
       END CASE;
  END; 
  /
  SHOW ERRORS;

  The column exists and matches the data type (number). Any help appreciated. bit at loss where I'm wrong.

  Good fishing! Who'd do all right.

• Satellite U205-S5034 - error when you try to create the recovery disks

  Hello world

  I have problems with the TOSHIBA recovery disk creator. When you try to create the recovery disks this error pops up:
  An unexpected error has occurred. Exit this application and start it again. (Error code: F1-0F00FE-00000002)

  The machine is a Satellite U205-S5034 under XP Pro SP3.

  Any help will be greatly appreciated. Thank you and have a nice day.

  DaveMatt44

  Hello

  What kind of DVD that you use to create a Toshiba Recovery disk? I have tried Verbatim DVD-R and TDK DVD-R and never had a problem with these discs. A friend tried DVD + R and he couldn t create a recovery disk. After he tried DVD-R and everything was fine but I do not know why this happened.
  So please try other discs.

  Also, check the Toshiba page for an update of the firmware of the CD/DVD drive. Maybe it will help you.