Simple transfer of VMware and Windows again MBP of existing install on a MB

Similar Questions

• VMware and Windows 7 no longer exists.

  Hello, my computer froze, and then I had trouble running VMware after this. I deleted a folder documents in my Imac, as it appeared, I got the Documents and Documents 2. Found after there were a number of documents missing, so I restored the. After doing this my windows side of my Mac said there has not been enough room and thus suspended himself. In some ways and I have no idea how, but after reinstalling VMware and running my drive Imac Applications check, everything seemed to go once again, even though he said then my windows was more authentic.
  Then he came in saying he did have enough room again and again suspended. I did everything what I tried before (I think) but no luck. All my Virtual Machine options are grayed out so I can't do everything I found online for help. There is no VMware tools either.
  I'm about to give up and take my Mac to the shop to fix wondered ig can anyone here tell me in simple terms if there is anything I can do about it?
  Thank you

  First of all, I suggest you to check the amount of free space on the disk (available) on the Mac hard drive. Right-click on the Mac HD > info. It should display. I suspect that there are very less amount of disk space on it and that's why the error message.

  If there is very less available disk space, and then try to empty the trash (ensuring that you have anything important in there). Then remove unnecessary files or move them to an external hard drive. If you have movies, iMovie, iTunes, music etc projects, maintaining a disk external hard should be a good idea.

  Once you have freed enough disk space (~ 2-4 GB), you should be able to start your virtual machine very well.

• Just upgraded PC parts and windows XP home or pro install peripheral not during the installation of windows

  Yesterday, I got a new gigabyte motherboard, ripjaws ddr3 memory and a processor AMD phenom II 1090 t edition.  During the installation of windows, it copies the files and reformat my old hard drive.  35 minutes from devices of the installation each time the blue screen appears and says that windows has been shut down.   I also had another hard disk installed my cousin gave me and I tried formatting and installing windows on that one too and did not work. Tried to install PRO then Home edition and none worked.  I tried out the video card and ram for 1 and 3 of the Bank and all switching leaving Bank 1 and nothing. Only I have the keyboard / mouse USB and video card/RAM/hard disks installed. In total, we have tried to install windows for about 2 hours and a half. .  All I have to b compatible with my motherboard and I have no idea why.  Someone please help!

  A vista 64-bit with sp1 would be ok?

  In fact I just bought windows 7 from newegg so I hope this will work lol. I saw the way to the blue screen a lot and I newegg feedback seen many people having crashes then install with new material that came out, and my computer is a 5 days old now.

• Help - installed VMware and Windows 7 and I can not see my Windows desktop

  Hello

  This could be really basic, but I can't seem to get by:

  I just installed VMware 8 on a new Macbook Pro (OS El Capitan).

  I then installed Windows 7, apparently successfully, all the way up to Windows installation was finished and I went to open the virtual machine for the first time.  The office opened very well, but when I went to maximize this mode full-screen, I essentially disappeared.  She is obviously still ongoing, as he urged on antivirus McFee, that I installed it successfully.

  In the library, the virtual machine appears grey, with a basket and McFee icon.

  

  I tried to uninstall the machine and install again, but the same thing happened...

  Any ideas?

  In fact, here is a better description of what's going on...

  You are in mode of "unity".

  It is a "cache" mode the windows desktop and allows access to applications as they were Mac apps.

  In your menu bar, there is an icon for the merge, and you can launch Windows apps from there.

  Alternatively, you can simply use "Single window" or mode "full screen" for the traditional windows back office.

  The button to switch is in the "View" menu

  Hope that helps!

• Easy transfer from XP and Windows 8

  I have 8 year, computer with XP.  I just bought a new one with Windows 8.  Can I use Easy Transfer to transfer data?  Or is there another way?

  Hello, can you confirm that this works for any level of SP in XP?  I had heard that it requires a minimum of XP SP2.  Thank you.

• VMware and Windows 10

  Hello!

  I have a problem with 10 windows, once you get to the screen of disc recognition hard so that you can choose Manual partitioning (advanced options) it asks to insert a USB flash drive or a hard drive, as you can see in the image below:

  

  If they can help me, thanks

  Note: Sorry for my little English.

  Written with the help of google translator

  This probably isn't a problem with the virtual machine, but with the Windows installation image that is corrupt (often lead by an incomplete download). Make sure there is the right size and — if provided by MS - the correct checkum.

  André

• View nx2 will not let me transfer based on Gallery windows, says file doesnot exist

  Download photos to view nx2 and perform a video disc.try to transfer to windows to burn disk it says file doesnot exist.

  Hello
  I suggest you according to the question in this forum and check if that helps:
  http://windowslivehelp.com/forums.aspx?ProductID=20
  It will be useful.

• Acrobat Reader ms and Windows 10 - think I've installed

  I had a problem with the automatic update of the DC Acrobat Reader on windows 10 - I kept getting an error message (2753 and 2502) and it would stop the update.

  Decided to completely uninstall the drive and reinstalling but uninstall does not work. I resorted to remove the files and registry entries.

  I tried to reinstall, but I get the message that I already install the program OR if I try to install Reader 11 it says I have a newer version of the player.

  This is getting extremely annoying - please help!

  I managed to solve my problem: -.

  Download Adobe Reader and Acrobat cleaning tool - Adobe Labs

• I ve tried to get the windows icon 10 but it goes up to 99% and then again never getting to 100%

  * Original title: updates-windows7 professional and windows 10.

  I installed windows 7 Professional on my pc. ASUS x54c but now I can not get more automatic updates. Ive also tried to get windows 10 icon but it goes up to 99% and then again never getting to 100%, I tried everything I see no chance. can someone help me.

  If the Upgrade Wizard of Windows 10 becomes blocked or unresponsive to 99%, wait at least 4 to 7 hours. If the installation program does not progress, close the wizard and restart your computer. Follow the instructions to upgrade manually by using the tool of creation of media or file ISO for Windows 10.

  If you encounter an error about enough space to perform the upgrade, see the instructions:

  How to install Windows 10 on devices with limited space

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: 10 things to do if the Windows 10 install fails.

  Retry the upgrade manually:

  Option 1: Using the media creation tool

  Download the media creation tool

  Click with the right button on the MediaCreationTool.exe file and then click on run as administrator.

  

  Note: How to check if you are downloaded or installed the update Windows 10 November

  Select upgrade this PC now and then click Next

  

  Option 2: upgrade using the file ISO for Windows 10.

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader). You can do so from the Device Manager.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).
  • Support your default BIOS reset BIOS.
  • Check if there BIOS updates available for your system, and then to apply them.
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a USB device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.

• Browser wants to open 150 tabs and windows at startup...

  In the process of cleaning up my office, I have switched my keyboard. I got the browser window open to ESPN3 in a replay of College football. My keyboard is a keyboard shortcut to open new tabs. Unbeknownst to me at the time, the shortcut key declined over 150 times, opening a new tab for each. In addition, each tab to open a new window pop up game. I opened the Task Manager and stop the process. When opening Firefox again, it automatically opens all tabs and windows again before I can do anything. So... after the termination of the process down again once I restarted the computer. And now, the same thing happens early upward. so... Shut the computer down. Same thing. so... I uninstalled Firefox and reinstalled. Same thing again. I am at a loss. Please advise!

  You can check for problems with the sessionstore.js file in the Firefox profile folder that stores the session data.
  Delete sessionstore.js will cause App Tabs and groups of tabs open and closed tabs (back) to get lost and you will have to re-create them (take note or bookmarks if possible).

  You can use this button to go to the current Firefox profile folder:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)
  • http://KB.mozillazine.org/Profile_folder_-_Firefox

• Ko 2416473 guard installation time and time again

  Ko 2416473 guard installation time and time again. Windows Update keeps wanting to install agaiin and once again.  Already sucesfully installed more than 10 times in the installed updates.

  Vista home premiun

  Hi gymgorilla,

  Adding to the suggestion of JoseIbarra, you can follow this link and check if the problem persists.

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Try to install EQ7 on iMac with Parallels and Windows 7

  Have iMac with Parallels and Windows 7. Try to install EQ7 (windows only program). Get the message "Error reading setup initialization file." How can I install this program?

  See the developers website for compatibility with Windows 7 and if there are updates, corrections or difficulties that might ensure compatibility.

  Windows 7 Compatibility Center

  Check if your application software or hardware is on the list

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Software:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx?type=software

  You can also try to run the program in compatibility mode

  You can find more information on compatibility modes in the articles below:

  http://Windows.Microsoft.com/en-us/Windows7/what-is-program-compatibility

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  http://Windows.Microsoft.com/en-us/Windows7/Program-Compatibility-Assistant-frequently-asked-question

• After using a third party partition manager program left to extend my Windows 8 partition, the system of Windows 8 start to a black screen and Windows 8 partition of the drive letter has changed

  Original title: problems of Windows 8

  I have Windows 7 (32 bit) and Windows 8 (64-bit) is installed in a dual boot. I tried to extend the partition of Windows 8 with a third party partition manager. Subsequently, I restarted after having learned so much.

  Later, the first thing I saw was that the locked screen image is replaced by a blue color. Photos of the user are also missing. Once connected, it took a long time for windows everything ready, and I'm stuck in a black screen with the mouse pointer.

  I entered in Safe Mode and found that the drive for Windows 8 letter has been changed (C: = Windows 7;) D: = recovery partition; E: = Windows 8, new drive letter; F: = Windows 8, old drive letter), I tried to change the drive letter, but it does not work.

  Partition of Windows 7 works well (it is what I currently use to put this problem), and I can access the data in the partition of Windows 8. I tried the methods of different repair without result (such as chkdsk and sfc/scannow).

  Can someone help me with this please? Any help would be appreciated.

  Hello

  I understand that you have a problem of black screen with Windows 8 and the drive letter for the partition of Windows 8 is also changed. This problem is due to the use of the third party partition manager program because it affects the registry files and causes the instability of the system.

  Try to run auto repair from the Windows recovery environment and check if that helps.

  Method 1: start the recovery environment with installation of Windows 8 media.

  It is another way to boot the PC and launch recovery tools when something goes wrong with the operating system.

  Please follow the steps below. Insert the DVD to install Windows 8 on DVD-ROM and restart your computer.

  (a) once you start your computer by using the Windows DVD or the system repair disc, a black screen is displayed with the gray text "Press any key to boot from CD or DVD". Press a button on any.

  (b) select the good time and the type of keyboard .

  (c) click on repair your computer in the lower left corner.

  (d) select Troubleshooting to Choose an option screen.

  (e) click on advanced options in Troubleshooting screen.

  (f) click Auto repair of Advanced Options screen.

  (g) following, choose the operating system by clicking on its button.

  (h) Windows 8 will be looking for problems on the hard drives and verify that all required files are intact.

  
  Method 2: Run the restoration of the system of the Advanced Options screen.
  
  System Restore to restore your computer to a previous state, quickly and easily without losing any of your files and personal settings. Sometimes when you install programs or drivers, they can affect some system settings and prevent other programs to function properly. You can use system restore to restore these settings to their previous state

  Follow these steps:

  (a) once you start your computer by using the Windows DVD or the system repair disc, a black screen is displayed with the gray text "Press any key to boot from CD or DVD". Press a button on any.

  (b) select the good time and the type of keyboard .

  (c) click on repair your computer in the lower left corner.

  (d) select Troubleshooting from the Choose an option screen.

  (e) click on advanced options in Troubleshooting screen.

  (f) select System restore.

  After the system restore your documents and files will always remain to their previous state.

  If you do not install Windows 8 media, I suggest you connect to any other computer and create a floppy disk to install Windows 8. Using this disk, you can run the troubleshooting provided methods.
  
  How to create the installation media for a PC refresh or reset:

  http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media

  You can also try the same steps using the bootable USB key. You must select USB as the first boot to the BIOS device.

  Note: Microsoft don't recommend any third-party partition manager program because it corrupts the registry files and cause the instability of the system.

  Write to us if you're still having problems. We will help you.

  Kind regards

• Problem with livemail, upgrade Windows 7 to 10 and back again

  Separated from this thread.

  Hello

  Having problem with livemail, improved Windiws 7 to 10 and then uninstalled immediately revert to the original with option to the program (things not working not properly).   All rolled back does OK no message or data errors.

  Now all the direct mail has duplicated, will remove some, but others won't.

  Can you post help or solution, please

  John

  It seems that many of those who go back to Windows 7 from Windows 10 experience a corruption of the store folder (the folder where messages, calendars and the account settings are stored). According to your storage folder is how complex (several accounts, calendars a lot, a lot of messages number of files), it can be simpler to just create a new storage folder and fills again:

  1. Looking at your list of messages in Windows Live Mail, press Ctrl-Shift-O for Options. On the Advanced tab, click Maintenance and then store the file. Copy the path to locate the storage folder.
  2. Close Windows Live Mail and wait a few minutes (the program will continue to run in the background, while he does his household).
  3. Press the Windows key + E to open an Explorer window, and then paste or type the path that you copied to the (1) in the address bar and press ENTER. This should open your storage folder.
  4. Right-click on the name of the folder in the navigation pane, and select Rename. Call the Live Mail Backup.
  5. A repair must check that all the program files are present and correct and properly registered, as appropriate. To do this, close all running programs, and then press Windows key + R, type wlarp and press ENTER. In the window that opens, select repair all Windows Essentials programs:

     
     When it is finished, restart the computer.

  6. Start Windows Live Mail and wait the program installs before doing anything. Press Ctrl-Shift-T to start the add your Assistant e-mail accounts and follow the prompts to add your e-mail accounts.
  7. Click once on the work online on the status bar and deconnecter disconnect Internet to avoid interference email downloads, and then use the file > import messages (I Alt - F) and point the wizard to the Live Mail Backup folder level. Do not intervene while the import happens.
  8. Leave the program alone for a while (an hour or two, or even a night or more) to enable him to reindex all your messages, then close and wait half an hour for the program to do his household.
  9. Relaunch the program and look at your messages under folder imported into storage folders. Take it slow, drag files out of any folder and drop in the location you want. Again, give the program time to re - indexing messages in their new location.

  Note that you can not drag files out of storage files. If you want to forward messages to a high plu account folder in the folders pane, you need to select messages to transfer, and then use the right click > move or copy folder. The controls are also available as buttons in the folders of the Ribbon tab.

• Windows OS 8.1 transfer between HDD and SSD on laptop (built-in two disks)

  Hi, I have an Alienware Laptop, 14, I wanted to transfer/copy/move my current OS (Windows 8.1) of my HDD (1 TB) to my (7.3 GB) SSD. I tried many methods I've seen online in other forums, I restored my computer whenever I between methods, when they fail. Yet, I need to find an effective way to do... I tried the following:

  -Start switched from AHCI RAID
  -Transformed into legacy prioritize boot from a USB device and tried to run AlienRespawn and Windows OS 8.1 (drawn from Microsofts website), twice, on two USB keys separate (both about 15 GB of storage).

  The result of AlienRespawn was simply did a cover of my HARD disk drive and my OS remained where he was, nothing has changed with my SSD. That being said, there is no selection in my START menu to choose which drive I want to start, for that, I guess I have to unplug my HARD drive so that it my laptop self chooses to run by using the SSD.

  The result of the execution of the USB with the operating system of Microsoft 8.1 is it says some sort of error, I googled the error online, he says to reformat the USB key and drop the operating system on it, and then try again. I did that twice, and both times found the same result (same error).

  I also tried to clone my HARD drive of my SSD using EaseUS, who put my documents and files on my SSD, but my BONE was still running on the HARD drive.

  I cloned partitions with Partition Master, with negative results, as well as using Tuxboot and Clonezilla combo to start my laptop using Clonezilla, but at the start he just asked me to remove all USB devices that did not have an operating system on them (I had a USB in)

  I also tried a few different USB sticks (I went out and bought three to try).

  The more recent method, I tried with the help of DiskPart. I executed what she says on many forums/sites, which involved cleaning/selection/activation disk 0 or no matter which drive my SSD was on. But once again, no result no positive.

  I'm desperate, I want to just run my OS on my SSD laptops, is it really so hard, or I'm just using the wrong methods and/or measures hurt?

  If anyone can help with a step by step guide that worked for them, please enlighten me!

  Thank you very much.

  I did a lot of research ahead, and this program kept coming as the way the simpler, cleaner to move the operating system, according to the people about these and other bodies.