Simple way to reconciliation tables reconciliation?

Similar Questions

• a simple way to insert data in a table

  Hello
  
  I need to know in a simple way on how to transfer data from one table to the other...
  
  First xx_inv_tab1 table has three columns col1, col2, col3 and where as the second xx_inv_tab2 table has five columns col1, col2, col3, col4 col5.
  
  Here col2, col3, col4 are the same columns in table1 xx_inv_tab1...
  
  Now I want to transfer the first data in table in second table... first column of the second table holds a sequence, followed by the first three columns of table data and followed with col4 col5 which will contain NULL values...
  
  In my scenario, I have 70-75 columns in my first table that I want to move to the second table including three new columns (one is the sequence with two other null values)...
  
  All ideas, if do us it in a simpler way, saying rather insert into xx_inv_tab2 (col1, col2, col3, col75) values (seq, col1, col2,... col75, null, null)
  
  
  Help appreciated...
  
  Thank you

  Easy

  not tested

  insert into xx_inv_tab2 t2 (col1,col2,col3,col4)
  select yourSequence.nextval, t1.col1, t1.col2, t1.col3
  from xx_inv_tab1 t1
  ;
  

  Note that col5 must not be used, since you want to fill with a NULL value.

  Use excel or sql developer write you a list of the column names, if you are lazy to write all the columns of 75 by yourself.

  Which might also work:

  not tested

  insert into xx_inv_tab2 t2
  select yourSequence.nextval, t1.*, null
  from xx_inv_tab1 t1
  ;
  

  Published by: Sven w. on August 31, 2012 16:41

• Is there a simple way to determine if an operating system has been virtualized?

  Is there a simple way to inspect a linux system, perhaps by a hook / proc, to determine if an operating system has been virtualized?  More multi-vendor is the solution, the better.  I don't know that I could grep through my table and system process for various metrics file, but I need something very stable, well known, and Boolean.  (This question has overcome my google skills as it is too vague for the sentence)

  Hello

  Yes, it is called red pill and you can watch the material using the command lspci or RedPill to determine more information.

  Best regards

  Edward L. Haletky VMware communities user moderator, VMware vExpert 2009, url = http://www.virtualizationpractice.comvirtualization practical analyst [url]
  "Now available: url = http://www.astroarch.com/wiki/index.php/VMware_Virtual_Infrastructure_Security' VMware vSphere (TM) and Virtual Infrastructure Security: securing the virtual environment ' [url]
  Also available url = http://www.astroarch.com/wiki/index.php/VMWare_ESX_Server_in_the_Enterprise"VMWare ESX Server in the enterprise" [url]
  [url =http://www.astroarch.com/wiki/index.php/Blog_Roll] SearchVMware Pro [url] | URL = http://www.astroarch.com/blog Blue Gears [url] | URL = http://www.astroarch.com/wiki/index.php/Top_Virtualization_Security_Links Top security virtualization [url] links | URL = http://www.astroarch.com/wiki/index.php/Virtualization_Security_Round_Table_Podcast Virtualization Security Table round Podcast [url]

• Is there a simple way to return 10 back to safari 9.1.3 safari

  Y at - it a simple way back safari10 back to safari 9.1.3 on an iMac with El Capitan.

  If you have a backup made before installing Safari 10, restore the backup.

  Other that that, there is no easy way. I'm sorry.

• Any way to edit tables in Textedit or Bean?

  Hello

  I used to use LibreOffice as my preferred burning software but I have questions of sensory processing, strobe and migraines, so I need to ripheriques in order to avoid painful flashing cursors. The demo Pages and NeoOffice, OpenOffice have similar flashing cursors. TextEdit and Bean allow users to turn off blinking cursors if we used the terminal hack to change their schedule.

  Unfortunately, I can't change the tables in Textedit and the bean. I can add or delete rows and columns at the end, but not between existing lines, and I can't copy and move a block of existing lines either.

  Can anyone suggest a way to edit tables in Textedit or bean or other compatible software without flashing cursors?

  My latest project docs are odt and my next will probably be in rtf.

  Thank you!

  (display using OS X El Capitan and crossposting to accessibility because the flashing is a Visual accessibility issue, at least for me).

  Right click-> add a line above works now at the bean. Nothing like it in Textedit.

• Is there a simple way to "upconvert" SD video HD in iMovie or FCP?

  I made a movie in 10 years (using the DVX 100) on SD.

  In order so that it can be published on Amazon Prime, it must be converted to HD.

  Anyone been a simple way to do this using iMovie or FCP?

  THX

  It is 4:3 or 16:9? Do not know iMovie but you can do FCP or compressor so you don't need to edit as well.

• is there a simple way to get photos of Photos in Photoshop

  Have I missed a simple way to get my pictures from Photos in Photoshop?

  Yes - buyexternal for extension of photo editors in the App store and we PS as a Publisher directly from Photos

  for other extensions, see Extensions for Photos for Mac Photo editing

  LN

• Y at - it a simple way to update my old DRM protected songs to non - DRM?

  I have about 500 songs protected with DRM in my iTunes library that I would like to upgrade. I have considered various options. I like simple. I don't want Apple music and the library of Cloud, and I don't want iTunes game. I don't want to make CD and load it into iTunes. I don't want to buy music elsewhere as I already bought at iTunes. I looked at various converters for Mac DRM, and they look like the best option for now. Before you buy one of these, I missed something. I read in various allows, at the same time, you could upgrade all your DRM songs to non - DRM iTunes somehow, but can not know that one. Is there a simple way to solve this problem? Devices just Apple and software will play those songs.

  Hello

  The easiest way to upgrade your iTunes Store purchases, is to subscribe to iTunes game. Your iTunes library is analyzed to determine what can be improved. Previous purchases that can be upgraded will be either the iCloud 'Bought' or 'Matching' State. Then, you select Delete DOWNLOAD, see download icon. If the tracks is updated you will see change the transmission speed of 128 to 256 Kbps. Then, you select make available offline to download the new version. Be aware that a small number of titles isn't expandable.

  JIm

• Any simple way to automatic test of FPGA card?

  I'm looking to create a simple self-test for a 1042 q populated in LabVIEW PXI chassis. The VI DAQmx Test auto works for most of the cards, but card 7853R FPGA is also present in the system. I wonder if anyone is aware of any simple way to perform a self-test on this map?

  It is not a built-in simple only for a self-test card FPGA as there is a standard DAQmx map. The reason for this is that DAQmx self test accesses the firmware of the card and performs some basic checks here. There is no such firmware on the FPGA card because the FPGA card allows you to build your own underlying software for a device.

  If you want to check on good communication with the FPGA chip, you can try to compile a white VI to the chip. If you need the functionality of IO control you will have to put some basic features in VI, but it shouldn't take a lot of time development.

• need the simple way to set the computer back to factory settings, and already saved safe data

  need the simple way to set the computer back to factory settings, and already saved safe data

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon.

  Mick Murphy - Microsoft partner

• Is there a simple way to transfer files from Windows 7 to Windows 10?

  Original title: want to transfer files on my Windows 7.  Help!

  Still trying to get my files from my Windows 7 laptop to my Windows 8.1.  Would it not easier that I have upgraded to Windows top 10?  Is there a simple way to transfer from Windows 7 to Windows 10?

  You look in Windows Explorer > Documents, photo, music, etc.

  If you don't know where you saved the files, you have a big problem.

  You are the only person who knows where you saved your files.

  See you soon.

• Simple way to compensate for the entry of data into an EditField?

  I'm keen to make an edit field with a small image on the left inside the parameter space. I can do it with a BackgroundFactory, but when the user enters the text, it seems bad and image overlays. Is there a simple way to push the starting point of the text box away a little so that I don't cover image?  I guess this could be done with a HorizontalFieldManager, BitmapField and aText field, but it certainly wouldn't be easy because of the border that I currently use.

  I'll respond and say I found an answer that was not too demanding.

  First of all, I place a VertFieldMan with the gradient background I wanted. Then, I set up a HorizFieldMan with the border I wanted around the domestic fields and a white Uni. Then I added a bitmapfield (the image has a white BG) and a textfield to the HFM. The trick was the TextField to draw its own border, so I changed it' to border to the one created with a simple white frame. The result is that it looks like an editable with the image field to the left and the part of editable text left to right.

• Simple way to put a window on the primary monitor?

  Is there a simple way to make a window on my second monitor the first monitor without turning on the second monitor? I have my TV hooked up as my second monitor and hate when I try to open a web browser and it appears on the TV (which is usually disabled) instead of my computer screen. Is it possible to easily move this window to the main screen without turning on my TV to locate the window?

  Press Win P and change the settings of the computer monitor only when not to use the second monitor.

• Is there a simple way to reduce/increase the two A / track V sizes in the CC timeline? [was: Adobe CC]

  Y at - it a simple way to reduce / increase the two A / track V sizes in scenario C C?

  There are keyboard shortcuts for expand/collapse the heights of the audio track and shortcuts to expand/collapse the heights of video tracks, but not both at the same time in increments (although you can quickly develop their all at the same time).

  If you are using Premiere Pro default keyboard:

  Opt + - / = collapses / develops audio tracks

  Cmnd + - / = collapses / expands the video tracks

  Shift += develops all the video AND audio tracks

  Shift + - collapses all the video AND audio tracks

• How to convert the compound path to simple way barred?

  New animation SVG here and you would appreciate the help.

  I exported an SVG graphic logo to facilitate the animation of lines in the logo. In short, I'm trying to make these lines 'draw' sequentially.

  After you import the SVG object in the browser, I realize the path data to describe complex shapes, rather than a simple path with a vascular accident brain. For example, straight lines appear as a path around the outside edge of the line, a rectangle. See the part of the image below showing the anchor around the edge of the line.

  While I could very well be wrong, it seems that I need to make these lines in the draw of logo is given simple way, with the width of the line determined by a stroke. Does anyone know how I could convert/export what I need to give me what I need?

  Thank you!

  Joseph,

  Simple/no tracks transparent FO, you can do the following:

  1) switch from fill to line in the Toolbox (in you first picture you have completed and no stroke);

  (2) ShiftClick each of the segments of both ends with the direct Selection tool and then tap on delete.

  This will give you two simple traces to the mixture;

  (3) object > mix > blend Options, not specified the value 1, then object > mix > do, then object > mix > Expand, then Ctrl / Cmd + Shift + group to ungroup, and then delete the traces of origin;

  (3) select the new path and him giving the desired weight of stroke (half of the difference in width for traces of origin).

  And Willi comments on using JPEG.