Wireless does not work after reinstalling xp family

Similar Questions

• Wireless does not work after Windows Update

  Original title: Wi - Fi internet connection is DISABLED since yesterdays upgrade, how can I get that back on?

  Since a windows update yesterday, before closing my laptop... I am not able to access the Internet.

  My without wire is off and I can't turn it back on.  Toshiba wants $99 for technical support.

  Hi Sheryl,

  Please join Microsoft Community where you can find the necessary information on Microsoft products!

  Wireless does not work after a windows update.

  1. what day that was installed?

  You can check the update in the update history:

  See the Windows updates are installed

  http://Windows.Microsoft.com/is-is/Windows7/see-which-Windows-updates-are-installed

  2. do you receive any error messages?

  3. What is the model of the computer?

  The problem may be with the drivers or with the device.

  I suggest that you refer to the procedure described in the site:

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

• Satellite Pro 6100 Wireless does not work after restoring from HARD drive

  After that restore disks for installing a new HD and use and to update XP sp2, the Wireless does not work and if the card is installed XP hangs then works in fits and starts. If the card not in place, not bad at all.

  Booting from a Linux CD, the card works perfectly! I assume that the driver is the problem. The wireless card is the original, an Agere MPC13A-20/R, with Toshiba p/n PA317U-1MPC.

  I have found some drivers Agere, but am not sure

  (1) if they are correct
  (2) how to install since the machine works in a way limited with the card in place.

  Any advice?

  Hello

  I checked the page of the pilot and the only available for Windows XP WLan driver is the driver of v.1.11.108 Agere.

  (1) just try to install this driver. If the driver is not correct or is not compatible, then windows will not install the driver and you will receive a notification. You just have to try

  (2) generally you may reinstall the driver from the Device Manager. Open network controller tree, and then you can reinstall the driver.

  But this is only possible if the windows started successfully

  PS: Have you checked the information of Microsoft Windows XP SP2 update on the page of the Toshiba driver.
  I discovered that you need to update several utilities if you have installed SP2 on this laptop.

• Pavilion dv7: Wireless does not work after upgrade to Windows 10

  After the upgrade to Windows 10 Wireless does not work, even if the wireless symbol F12 shows blue. In the network settings, the wireless switch exhibits & cannot be turned on to.

  This feature worked perfectly in Windows 7

  No worries.

  Thanks for the actual name of the product from your laptop.

  Let me take a look.

  I will edit this thread to let you know what I found.

  The Intel Centrino Advanced - N 6230 is a wifi adapter that is compatible with your book which has Windows 10 drivers available. the driver is on the following link.

  https://communities.Intel.com/thread/59710?start=0 & tstart = 0

  You can replace yourself because it is easily accessible after removing the cover of the hard drive Bay. See page 21 of the manual at the following ADDRESS.  http://h10032.www1.HP.com/CTG/manual/c02842278

  I saw them on eBay for @ $20.00 USD

  http://www.eBay.com/ITM/new-Intel-Centrino-advanced-N-6230-Wireless-WiFi-Bluetooth-combo-card-62230ANHMW-/170958962681

• router Wireless does not work after Windows Update

  I have a router WRT54G V.5. Windows Vista Home Premium did an automatic update. Now wired connection works, the Wireless does not work. Ask key, but when nothing happens. Action of diagnoses has been canceled. I disabled and enabled, does not. Any help will be appreciated!

  Take not of the Settings (SSID and WEP/WPA Key) wireless router...

  Know the wireless settings follow this link

  Once you know the wireless settings are attempting to connect to your wireless network...

  XP:
  Click Start and goto the control panel and double-click on network connections, right click wireless network connection and click Properties.
  Now, in this window, click on the second tab of wireless network and give a check mark on "use windows to configure my wireless" and then delete all network names present in the preferred networks window. Then click OK...
  Right click on the wireless again network connection and then click View available wireless networks and try to re - connect to your network...
  Now, it will give you the opportunity to put the network/wep key, make sure that you enter the correct network key and confirm...
  It will connect...

  Vista:
  Click Start > Control Panel > Network and Sharing Center > manage wireless networks, here to remove any present network and close the window.
  Click on connect to a network and try to re - connect to your network, he must ask for your key/password network, enter the network and password correct key and click on connect...
  It needs to connect... Once you're connected, you must restart the computer, it needs to connect to the Internet...

• Jet 7 Tablet 5709: 10 Windows reinstall does not work properly; touch feature does not work after reinstalling HP sw

  I followed the steps of the http://h30434.www3.hp.com/t5/Windows/Windows-10-fresh-installation-on-the-HP-Stream-tablet/m-p/52038... to restore my tablet. The bottom line is - I use a keyboard and mouse, but tactile does not work, even after the installation of the various HP software specially required for the flow of data 7. When I start the Tablet, I can get the lock screen, but it cannot exceed.

  I tried to install Windows 8.1 USB, but I can't go beyond the screen who wants the product key. Should what product key I use? If I go back and reinstall Windows 8.1 the touch feature work?

  What can I do to get a running Stream 7 tablets?

  Hello Aberger,

  I guess that you have improved your 7 to 10 of Windows Workflow, but now you want to reinstall Windows 8.1, correct?

  If you went to go back beyond the 30 day trial period, you can use the image USB, you must have created 8.1 Windows before installing Windows 10.

  IF you have not done this media, you will need to clean install Windows 8.1 with Bing.

  You can not install ordinary Windows 8.1 copy unless you buy a new key.

  Machines that accompanies Windows 8.1 no longer a sticker with a key to the subject because the key is embedded in the bios. Installing Windows 8.1 with Bing will activate when he sees the key in the bios.

  During the installation process, you may need to click Skip to ignore entered the key until Windows has installed fully. If so, this will cause windows to enter a Limited State of Activation. When you connect to the internet to update, it will fully activate.

  You must contact the HP Support directly to the new copy of the installation media if you do not already have.

  Here is the link to contact...

  Contact HP worldwide | HP® official site

  Let me know if you have any other questions.

• Satellite T110-121 - Wireless does not work after sleep in Win7 Home Prem 64

  Hello

  I bought Toshiba Satellite T110-121, with Windows 7 Home Premium.

  Problem:

  1. after going into Sleep Mode, when he wakes up, my WIFI does not work, unless I'm in wireless network card setting, Advanced tab, then I change the Tx to say 100% to 75% power level, then the WLAN will work.

  2. I tried to adjust the setting for power management on the network card for maximum performance and does not disable during sleep and also in the Bios but nothing is

  3. I use Realtek 8191SE drivers have been updated (wireless card, Ethernet, Bios)

  Thank you

  As much I know Tx power level option must be set to Auto.
  Have you noticed the same behavior with Auto option?

• Wireless does not work. Reinstalled Vista and update latest drivers.

  Original title: Wirelless does not

  I reinstalled Vista home 32-bit on my Dell inspiron 1525. My wireless does not always work. When I go into Device Manager, I see a yellow exclamation next to the wireless driver. I downloaded all the drivers of network from the Dell Web site. I uninstalled the driver and rebooted to let the computer attempt to automatically install the driver, then he told me that

  device driver software was not successfully installed

  Please consult the manufacturer of your device to help get this device installed

  Failure of the Broadcom 802.11n network adapter

  How can I fix it?

  Thanks in advance

  Hello

  Please follow the methods.

  Method 1:

  Run the Microsoft fixit for the link.

  http://support.Microsoft.com/mats/hardware_device_problems/

  Method 2:

  Follow the steps from the link

  http://www.Broadcom.com/support/ethernet_nic/determine_driver.php

  If you are still experiencing a problem, I suggest you to contact the support team of Broadcom for assistance.

  http://www.Broadcom.com/support/

• Network connection does not work after reinstalling Windows XP.

  Original title: problems with reinstalling XP.

  I had re format and re install windows xp but now my network connection does not work.  I have no IP address, even if my router and the pc are on DHCP. Device Manager tells me that the controller Ethrnet on the motherboard has no drivers, but I can't find a driver.  Any thoughts appreciated.

  Hi John Fisher_888,.

  You can download & install the drivers for the adapter from this link & check if it helps

  http://support.Dell.com/support/downloads/devices.aspx?c=us&l=en&s=Gen&SystemID=DIM_PNT_P4_8400&OS=WW1&OSL=en

  Hope the helps of information.
  Please post back and we do know.

• Fusion does not work after reinstalling bootcamp

  The previous installer: install Bootcamp with XP and using Fusion for xp from os x.

  I improved my internal hard drive and used superduper to copy on my existing mac partition.  However, my xp partition has not transferred because superduper does not recognize this.  I ended up reinstalling windows from scratch via bootcamp.

  I can boot windows very well.  The problem is that the merger will not start my windows partition.  I get this error message:

  «You have your IDE (disks/CD-ROM) devices configured in a State that won't work - you have an IDE slave with no master to ide0:1.»

  While this works on some BIOS and some actual machines, it doesn't does not correctly on a virtual machine. "Please place your disk/CD-ROM in ide0:0 to ide0: 1 in the configuration editor.

  I have run the uninstaller for the merger and then reinstalled but it does not work.  (It also remind my series, so I do not know it is how 'uninstalled').

  Is there a way to reset the merger?  I'm on 2.0.1.

  Thanks for any help!

  When the Fusion is not running, remove your machine virtual Boot Camp (and the virtual machine to help naos) of /Users/$ the specified item was not found./Library/Application Support/VMware Fusion/Virtual Machines /-since you changed the partition, it will not work in all cases. The next time that you run the Fusion, the virtual machine Boot Camp must be re-created.

• Sync does not work after reinstalling Windows 7

  Sync works great between my Windows 7 Desktop and 8.1 tablet. The PC got a clean installation of Windows this weekend and now Sync does not work. I do not receive my bookmarks/history/etc on the desktop.

  -Two versions of Firefox are updated (40.0.2)
  -J' read the troubleshooting and installation FAQs
  -I am able to sign in sync on both computers
  -For the signature, I get a popup saying that Sync will begin momentarily and an e-mail notification. Nothing happens tho.

  I suspect that the problem is related to this 'new' version of Sync. I tried to follow the FAQ "Updated to the new version of Sync", I took off the two devices, I checked both are on the latest version of Firefox, but the next step is to create a new account to sync and it doesn't let me do, I plug my email and get "account already exists." What Miss me?

  The new profile created from the clean windows installed a fusion with other devices? Check the device to see if it retains profile data.

  Have you changed the password? This would stop all data from previous synchronization that was not local.

  If you go down this road of troubleshooting, the account must be deleted first. However to prevent data loss, you can click on remove account from accounts.firefox.com and then re - sign up.

• Pavilion 15 n096sa: Hp Pavilion Wireless does not work after Windows 10 critical update

  HP laptop Pavilion 15 PC - product number: F4T58EA #ABU - 10 family 64-bit Windows

  Hi all

  I have recently upgraded to windows 10 and had not had any problems until one evening internet dropped out. After a while I realized the wifi adapter did not work. I tried to update the driver, nothing helps. The unit displays under working properly in Device Manager but does not appear in the network connection settings.

  I tried a system restore point that solved the problem but then Windows 10 updates (updated critical around 23 September 15) and wifi no longer works again. I noticed there was recently a couple of new updates of the driver (sp72517), but these have not solved the problem.

  I can still connect to the Internet using a LAN cable, but need help need help I can't easily use a LAN due to the location of routers. I've updated the Hp Wizard and I tried troubleshooting etc but still no joy.

  The elbow of any help would be appreciated gratefully.

  Thanks TT

  Hi all

  I managed to find a solution to this problem online, don't know how or why it worked, but it solved my problem and I hope that it might help others.

  I uninstalled and deleted the files from the wireless driver, then uninstalled Kaperskey and restarted my laptop. Then I went into Device Manager and manually updated the network drivers (think I might have restarted again here) and sucsess hey presto, all that remained to do was to reinstall kaperskey.

  Hope this helps someone else with a problem with wifi Realtek Pavilion.

• USB does not work after reinstalling Win XP Pro on P10 - 504

  Hi all

  I have problems with my computer laptop satellite P10 504 series, I recently had to reinstall windows xp professional on my laptop, and since I had no usb recognision.

  all devices (disks to flash memory, wireless usb devices) all show the power on the power light, but windows does not detect the new hardware, I reinstalled now twice thinking it was a faulty installation but not luck...

  OS: XP Professional SP2

  I have no recovery / tools and utilities cd since they disappeared, downloaded all the drivers from the toshiba website, even tried using the latest chipset drivers intel on the NET, but none seems not to work...

  Help, please

  any help is always appreciated

  Thanks in advance
  Rob

  Hello

  I think only 2 possibilities:
  1. the USB driver is missing on the download page. Then, you should contact Toshiba service.
  2. I found a Quick Fix Engineering Q822603 for USB drivers. Maybe by installing this will help.

  I'm sorry that I don't have a better idea.

  Good bye

• WiFi does not work after reinstalling the system

  I have Pavilion dv6t - 6 c 00. I had to reinstall Windows 7 due to a virus. After installing all the drivers available from hp.com for my model, everything finally works but Wifi still does not (network controller shows lack driver even after I tried like 8 different). Here are the technical details:

  PCI\VEN_10EC & DEV_8176 & SUBSYS_1629103C & REV_01
  PCI\VEN_10EC & DEV_8176 & SUBSYS_1629103C
  PCI\VEN_10EC & DEV_8176 & CC_028000
  PCI\VEN_10EC & DEV_8176 & CC_0280

  Appreciate any help. Thank you!

  Hello:

  Download and install this driver.

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5060882&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_105197_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• S10e (4187XB5) Wireless does not work after a few seconds

  The wireless thinks that it is connected. It connects to the home (or office) wireless without penalty, acquires the valid IP address, etc., but behaves as if not connected after a few seconds.

  I tried:

  Uninstalling and reinstalling the NIC via Device Manager (after that, I can browse the web for a few seconds, then nothing will load again)

  Install all updates on the system (there is no significant updates pending)

  Update the driver for the Broadcom network adapter

  Returning to the previous driver for the Broadcom network adapter

  Update the BIOS.

  The firewall is disabled. Ethernet works without problems, but it is not practical to use the netbook on ethernet.

  Assistance would be appreciated.