Simulate the GPS and the accelerometer?

Similar Questions

• Portege M700 - Rotation buton and the accelerometer does not

  Running Vista Business 32-bit.

  When I put my M700 in tablet mode and tilt the tablet to 1side and press the button next to the slider he used to rotate the screen in that direction.
  He doesn't do this more. I have
  Note also that all the utilities of the accelerometer, like tilt, shake and advanced security no longer work. detection of movement of hard drive does not work.

  I reinstalled from recovery discs and installed original and new extension of the tablet version and pvat. Nothing seems to help. I also installed Windows 7 ultimate 64-bit, it does not work there either. I've actually noticed that it also does not work on vista because of this does not not under Windows 7.

  I wonder whether or not my accelerometer is broken or not because it allows to work with the original installation of discs or is it a software problem?

  Hey mate,

  > I reinstalled from recovery disks
  To be honest, if you have the same problem with the factory settings, it appears to be a malfunction of the equipment. With the settings everything should work properly without updating a software or driver.
  So I recommend you contact an authorized service provider. Guys can help you because here it s only a user to user forum.

  By the way: is the new version of the BIOS installed?

• I want to buy an iPad 2 Air and run Hema maps on it - Hema Explorer and 4WD Hema maps. Can I run these on the iPad 2 to Air EVERYWHERE in Australia as he claims that the iPAD has 'Assisted GPS and GLONASS. I want to use it for travel in the outback

  I want to buy an iPad 2 Air and run Hema maps on it - Hema Explorer and 4WD Hema maps. Can I run these on the iPad 2 to Air EVERYWHERE in Australia because it indicates that the iPAD has 'Assisted GPS and GLONASS' or do I need a SIM card as well. I want to use it for travel in the outback.

  Only if they are available in the iTunes App Store.

• Simulate the sine wave using LabVIEW FPGA with NOR-myRIO and display in real time

  Hello

  I'm relatively new to LabVIEW FPGA. I am trying to test (and later apply) controllers high speed on myRIO.

  At this point, I'm trying to simulate the sine wave from 1 to 10 kHz using Sinewave generator VI express. I also intend to display the sine wave on the time real (RT) using FIFO. However, I had a bit of trouble to understaing various synchronization parameters.

  1. how to encode information about the sampling frequency generating sine wave? (The side FPGA vi requires only the frequency of the signal and possibly phase and does not rate update lines)

  2. how to estimate the number of items in a FIFO? (that is, the relationship between the rate of updates to loop (RT), the signal frequency, sampling frequency and the number of items in the FIFO)

  It would be great if we could share a very simple program (side host and target) that did something similar.

  Thank you

  MILIN

  Milot,

  I think the problem is the type of data in your FIFO. Your FIFO is configured to use a data type of I16. The problem is the number, it displays only ever will be-1, 0 or 1. To resolve this problem, you must send the sine wave as a fixed point data and convert it to a double on the side of the RT. This should significantly improve your resolution.

• Calibrate the accelerometer and orientation sensor

  Is it possible to calibrate the accelerometer and orientation sensor? For my motorcycle G sensors are not accurate? I think there is a way to edit some system 4.4.4 android files.

  Archies, please do not type in uppercase - this is considered rude and involves screaming.

  It is that nothing built-in in the phone, but there are some 3rd party apps that claim to calibrate the compass.

• No option to simulate the peripheral cRIO after installing Labview and RT/FPGA Modules of downloads (lack of driver support?)

  Hi guys -.

  Basically, I need to simulate a cRIO device without yet having equipment on-site, like this:

  How to simulate the FPGA hardware target using with LabVIEW Project Explorer

  Instead, I only get the options presented in the attachment "Add Target Options.jpg.  I guess it's because of missing drivers, which I assume is due to an error that I made during a recent new LV installation installation went like this: I downloaded (not diskettes) and installed the following (in this order, the latest versions all around):

  (1) LabView development system

  (2) real-time module

  (3) FPGA module

  (4) NEITHER-RIO (previous installation-by-installation)

  (5) DAQmx

  At the end of (1) and (2), I got the screen shown in the second attachment ("Drivers Installer Message.jpg"), but could not able to recognize the folder "device drivers OR" (I also downloaded), or one of its subfolders.

  According to me, I'm missing an obvious option to load the necessary drivers after installation, but can't seem to find reference to it in the forums.  Could someone give me a little help in the right direction?

  Thanks a lot and have a nice day.

  
  

• simultaneous acquisition of the accelerometer and a measure of a rotating machine encoder.

  I want to make a simultaneous purchase of the accelerometer and a measure of a rotating machine encoder.

  So what National Instruments data acquisition product must be chosen to do this capture.

  Sure that if your accelerometers do not need power IEPE (maybe you have an external power supply for the accelerometers) and if the voltage sensor is located in the voltage of the sensor of the 6221 range.

• Mulitasking on Casacde (Backbround thread for reading the accelerometer and in the foreground UI update)

  Hello

  I make application to read data from the accelerometer. I create the user interface using C++ and when the user clicks on the application startup button taking users accelerometer reading. I tried to update x, position y of the component and textarea or a text label. How can I do?

  I've attached my app.cpp file in which I want to update the text of button or label and move the image to different x, the coordinate y.

  I'm multitasking successfully implemented over the waterfall.

  Here is my code in which the two wire work in parallel.

  Step 1: Extend the class with the Thread class

  Step 2: The signal whenever you want to update your UI Thread class

  Step 3:

  QObject::connect (myThread, SIGNAL (signalGUI (float, float, float)),)
  SLOT (showUpdatedData (float, float, float)));

  myThread is an object of the class as we thread createad by exteding the Qthread.

  signalGUI is a signal that emerging us from the worker thread.

  showUpdatedData is a slot in which we write the code to update the GUI.

  In this way we can implement multitasking on the waterfall.

• Support to properties of the device - GPS and WIFI

  Hello, I am developing an application and I would be taking in charge all models of devices with gps and wifi support. Is it possible to get information, if the device supports GPS and Wifi?

  What devices is touch screen, there is a class touch screen and an isSupported() method, which returns false, if the touch screen is not supported on the device. Is there a similar method for Gps and Wifi, too? I searched the web, but I can't find anything about this and I think that's not good filter device names to determine if the application should run or not. I would appreciate a quick response time to the app's short... Thanks in advance.

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800332/832062/How_To _...

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=java_dev&message.ID=5752&query.ID=161...

• What device / gadget will track my GPS and create a log for the card module?

  Hello!

  My camera does not have GPS, and it's a pain to manually find everything if I want to record on the card module.  I recently saw a video saying that I could wear something with me at the same time, and this would create a newspaper that I could download to lightroom and he would marry the two sets of information together.  I don't know what to look for or to start google gadget.  I have a garmin car sat nav, but I think this is a big bulky to carry around (and I only am unaware it would create a newspaper). I would like the price up the cheapest possible option for this see if worth it. Anyone know what kind of things I need to get, or can recommend you a cheap camera.

  Thank you!

  This came up several times recently, while I recorded and released a video to demonstrate:

  https://youtu.be/v2nMcD-t1Ew

  If it helps, please be sure on this issue as "replied," to help others to find in the future.

  HD ++

• Simulate the operation restore and recovery RMAN

  Hello
  
  RMAN allows us to clone our production database which is 3 TB in size.
  Often we set until sequence set wrong for which the recovery fails.
  But it takes several hours just to see him fail.
  is there a way simulate the RMAN backup before restoring?
  
  as it is there noapply order patching to see what changes patches will be.
  
  
  Kind regards
  Marjorie Dutta

  It may depend on what type of failure, you mean. You can check with the BACKUP from the LISTavailable backups, but you can also consider using RESTORATION... OVERVIEW. You can also consider RESTORATION... VALIDATE, but it may take much longer.

• Are there problems with the accelerometer/compass on the Flipout?

  My flip is great, except that most of the applications that use the accelerometer does not work correctly.

  This includes: drop http://www.android.com/market/#app=com.infraredpixel.drop

  Labyrinth lite http://www.android.com/market/#app=se.illusionlabs.labyrinth.lite, aTilt 3D labyrinth free http://www.android.com/market/#app=com.fridgecat.android.atiltlite, and the reality applications, Wikitude and Layar immersed.

  In all this, left, right, front, rear are twisted.

  On the other hand, the "abduction" game seems to work fine, and it uses tilt left/right to lead your cow...

  I wonder if this a bug in all of these programs, a bug in the Flipout, or just a problem in my phone.

  Else you have noticed this problem on their phone?

  Yes, I have a flipout. I tried Labyrinth lite and it works fine.

  You can try to go in the game settings and calibrate the level. You can also try to do a software reset the phone, but you may have a hardware problem.

  If a reset does not work, then you will need to exchange the phone. MotoBlur will restore much of your data, but you will lose messages SMS and photos - but let's go back to the top of your data on your computer or SD card.

• Satellite P850 - wonder about the accelerometer pilot description

  I was delighted to see an accelerometer for the P850 pilot in the driver downloads.

  I was also happy or sad to find that it was really a hard throttle.
  There must be a correction of the description, or the correct driver should be loaded.

  I assume you mean the [utilities accelerometer | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 2 & selSeries = 152 & selProduct = 7507 selSh ortMod = null & language = 13 & selOS = all & selType 216 = & year = upload & monthupload = & dayupload = & useDate = null & mode = allMachines & search = & action = search & macId = & country = a he's & selectedLanguage = 13 & type = 216 & page = 1 & ID = 88083 & OS ID = 46 & driverLanguage = 42]

  Description says:
  + These utilities are a set of utilities of material working with motion detectors built into your machine. With the accelerometer, your machine will be able to detect the position you hold your computer at any given time. You can set the machine to perform a specific function when the device is tilted quickly left or right, either at the front or back. You can also take control of the cursor in some applications and move by leaning the PC in a certain direction. +

• Simulate the entry

  Hello

  To check my software, I want to simulate some signals on the entrance of the simulated NIDAQmx Council. Is this possible?

  I created the jury simulated in NI MAX, but I know not how to simulate the signal on the inputs and run my software (in C language) in order to acquire the data.

  Thank you

  Theinput signal of the simulated device is built-in, you can't change it. It is better to write your own piece of code that simulate the signal.

• wanted to build a vi to simulate the hold on a Panel button.

  Hello

  Were to simulate a press and hold on a Panel button to turn on the rest of the buttons on the Panel.

  Kind of extreme, used case Acquire of entry data, index table, structure (boolean), all in a while loop.

  No comments for this approach or any ideas appreciated,

  The vi can be downloaded on request.

  Rgds,

  David