Simultaneous source and destination NAT on PIX

Similar Questions

• SQL query to find the total number of source based nonsource passangersbetween source and destination station and passenger station on the same chekindate

  Hello

  SQL query to find the total number of source based nonsource passangersbetween source and destination station and passenger station on the same chekindate.

  Please help on this script and let me know if you need more details.

  ---

  You use a SELECT statement.  Let me know if you need more details.

• Why do Shotmatch clips source and destination, both change?

  When I click on a source and destination Shotmatch clip affects both. I want to clip 2 match clip 1, clip 1 is not changing.

  Appreciate any ideas

  Neil

  I thought about it. It's my first time using SG and get used to the shape and what works when you link first. I am restoring an old film silent and discovered that I separate the shots, so it was darkening the two shots because they are in the same area of the clip. After using scene detection, it works.

  However my other question is obtaining detect GD using an edl instead of the scene. My movie is 23.98 but SG think that the edl is 24. I rechecked my sequence and parameters of the SOUL to be sure but still the same issue.

  Bret

• popular error; An error occurred when opening a virtual disk. Make sure that the converter server and source running machines have network access to the ESX/ESXi hosts source and destination.

  Once again; same problem, others have encountered but nothing seems to work.

  An error occurred when opening a virtual disk. Make sure that the converter server and source running machines have network access to the ESX/ESXi hosts source and destination.

  We have 1 physical servers, we need to see. Here is the environment. All 3 separated location, 3 all firewall separated

  1 physical servers

  -Internal IP address; 172.16.160.21
  -FARM Firewall

  vCenter Server

  -Internal IP address; 172.16.1.85

  -Local Office (ALX)

  Location of destination (ESXi host):

  -Internal IP address; 172.16.153.20

  -Firewall ROOMMATE

  
  Already completed:

  VMware KB: disable SSL on VMware Converter Standalone 5.x encryption   SSL disabled in converter-worker

  Firewall are open / Tunnel is open throughout the environment.

  I have attached the logs.

  Thank you very much

  POCEH; Thanks for the reply. But I wouldn't be pulling my gray hair if I knew what the problem was. I understand that there not for the peer but why...?

• Converter does not have "an error occurred when opening a virtual disk. Verify that the Converter server and source running machines have network access to the ESX/ESXi hosts source and destination. »

  Hi all

  I'm having some trouble converting server physical windows using autonomous vConverter 5.5.

  error message:

  "An error occurred when opening a virtual disk. Verify that the Converter server and source running machines have network access to the ESX/ESXi hosts source and destination. "

  I have attached the bundle newspapers. Please notify.

  See you soon...

  Your error is:

  2014-11 - 04T 18: 27:27.587 - 08:00 [01236 info "Default"] GetManagedDiskName: Get disklib file name as vpxa-nfcssl: / / [a0110-vmgt70-001] WIN-MOVRCVCSITG/WIN-MOVRCVCSITG.vmdk@a0110tesxhyp01.datacenter.telenorservices.com: 902! 2 b 52 87 75 03 03 ff 49-67 2f 3 a 61 76 and 00 cd e1

  2014-11 - 04T 18: 27:27.587 - 08:00 [01236 WARNING 'Default'] [, 0] NfcNewAuthdConnectionEx [NFC ERROR]: unable to connect to peer. Error: Failed to search for host for a0110tesxhyp01.datacenter.telenorservices.com server address: the requested name is valid, but no data of the requested type was found

  2014-11 - 04T 18: 27:27.587 - 08:00 [01236 info "Default"] Sysimgbase_DiskLib_OpenWithPassPhrase failed with 'NBD_ERR_NETWORK_CONNECT' (error code: 2338)

  Check the manual on the required ports.

  HTH

• How is it possible to clone a virtual machine cluster when data warehouses not presented in source and destination

  I did not know that on ESX 3.5, in order to afin de vivre live clone a virtual machine from one ESX host to another, source and destination stores had to be available. However, I'm currently cloning a virtual machine to a host in a datacenter and cluster to one host in a different data center, but the destination store is not available at the source host and visa versa.

  How is that possible?  This is a new feature of vSphere?

  That seems to work on the console port. See this thread: http://communities.vmware.com/message/1475721#1475721

  AWo

  VCP 3 & 4

  Author @ vmwire.net

  \[:o]===\[o:]

  = You want to have this ad as a ringtone on your mobile phone? =

  = Send 'Assignment' to 911 for only $999999,99! =

• Load Source and Destination =? Table does not structure the same.

  Hello
  
  I have to copy the data from the source table to the destination table. The structure of the 2 are not the same. Number of records in the destination table must be half of the number of records in the source. The reason is the source a named column (for example) c_type = 'Up' - a single line or 'Down' - in another line. What is reprsented in the destination as 1 rank since the number of columns is more. Example up_name, down_name, up_dep, down_dep.
  
  How can I insert in the destination according to the c_type column in the source?

  Example:
  I want to insert into destination.up_name where c_type = 'Up' and destination.down_name where c_type = 'Down'...
  and so on

  How can I write my sql query such that I must write an insert statement and put the right data in the right column?

  Mass25 wrote:
  Number of records in the destination table must be half of the number of records in the source. The reason is the one source > column named (for example) c_type = 'Up' - a single line or 'Down' - in another line. What is reprsented in the destination > as 1 rank since the number of columns is more. Example up_name, down_name, up_dep, down_dep.

  I hope that's what you're looking for:

  SQL> WITH SOURCE AS
    2       (SELECT 1 id_col, 'UP' c_type, 'up_name_1' name_col,
    3               'up_dept_1' dept_name
    4          FROM DUAL
    5        UNION ALL
    6        SELECT 1 id_col, 'DOWN' c_type, 'down_name_1' name_col,
    7               'down_dept_1' dept_name
    8          FROM DUAL
    9        UNION ALL
   10        SELECT 2 id_col, 'UP' c_type, 'up_name_2' name_col,
   11               'up_dept_2' dept_name
   12          FROM DUAL
   13        UNION ALL
   14        SELECT 2 id_col, 'DOWN' c_type, 'down_name_2' name_col,
   15               'down_dept_2' dept_name
   16          FROM DUAL
   17        UNION ALL
   18        SELECT 3 id_col, 'UP' c_type, 'up_name_3' name_col,
   19               'up_dept_3' dept_name
   20          FROM DUAL
   21        UNION ALL
   22        SELECT 3 id_col, 'DOWN' c_type, 'down_name_3' name_col,
   23               'down_dept_3' dept_name
   24          FROM DUAL)
   25  SELECT * FROM SOURCE
   26  /
  
      ID_COL C_TY NAME_COL    DEPT_NAME
  ---------- ---- ----------- -----------
           1 UP   up_name_1   up_dept_1
           1 DOWN down_name_1 down_dept_1
           2 UP   up_name_2   up_dept_2
           2 DOWN down_name_2 down_dept_2
           3 UP   up_name_3   up_dept_3
           3 DOWN down_name_3 down_dept_3
  
  6 rows selected.
  
  SQL> WITH SOURCE AS
    2       (SELECT 1 id_col, 'UP' c_type, 'up_name_1' name_col,
    3               'up_dept_1' dept_name
    4          FROM DUAL
    5        UNION ALL
    6        SELECT 1 id_col, 'DOWN' c_type, 'down_name_1' name_col,
    7               'down_dept_1' dept_name
    8          FROM DUAL
    9        UNION ALL
   10        SELECT 2 id_col, 'UP' c_type, 'up_name_2' name_col,
   11               'up_dept_2' dept_name
   12          FROM DUAL
   13        UNION ALL
   14        SELECT 2 id_col, 'DOWN' c_type, 'down_name_2' name_col,
   15               'down_dept_2' dept_name
   16          FROM DUAL
   17        UNION ALL
   18        SELECT 3 id_col, 'UP' c_type, 'up_name_3' name_col,
   19               'up_dept_3' dept_name
   20          FROM DUAL
   21        UNION ALL
   22        SELECT 3 id_col, 'DOWN' c_type, 'down_name_3' name_col,
   23               'down_dept_3' dept_name
   24          FROM DUAL)
   25  SELECT s1.id_col, s1.name_col up_name, s1.dept_name up_dept,
   26         s2.name_col down_name, s2.dept_name down_dept
   27    FROM SOURCE s1 JOIN SOURCE s2
   28         ON (s1.id_col = s2.id_col AND s1.c_type = 'UP' AND s2.c_type = 'DOWN
  ')
   29  /
  
      ID_COL UP_NAME     UP_DEPT     DOWN_NAME   DOWN_DEPT
  ---------- ----------- ----------- ----------- -----------
           1 up_name_1   up_dept_1   down_name_1 down_dept_1
           2 up_name_2   up_dept_2   down_name_2 down_dept_2
           3 up_name_3   up_dept_3   down_name_3 down_dept_3
  
  3 rows selected.
  
  SQL>
  

  Source has 6 entries and it was self joined to give 3 records that can be filled in the Destination Table.

  Always post some sample data with the desired result. That you will get quick answers.

  Kind regards
  JO

  Edited: Added citation Tags

• Destination NAT/PAT pix

  I have a pix 506 (ver 6.3) running PAT for internet access. Now, I must create a VPN to a third party and need to NAT source ip addresses. Is it possible to have separate NAT basin which is only used when the destination is the third network (that uses private address). Basically, NAT based on destination ip address.

  You can also one-third have a vpn 3 k. Can they NAT my source ip when packets are decrypted at their end before sending them to the final destination with a LAN-to-LAN NAT rule. I don't know that I read somewhere that even if a static mapping on the NAT of LAN-to-LAN rule suggests for this, it won't work.

  Thanks in advance

  Jon

  You want "Policy NAT", which is described in the documentation for PIX 6.3 here:

  http://www.Cisco.com/univercd/CC/TD/doc/product/iaabu/PIX/pix_sw/v_63/config/bafwcfg.htm#1113601

  The VPN 3000 not NAT in this sense, to do it in the PIX is your best option (only).

  HTH - good luck!

• Import of Lightroom - Flash player appears more than once in the source and destination

  How can I remove Flash Player from the list of destinations and sources of import?

  I recently had considerable difficulties, download Flash Player to view the video from the site, but now it appears more than once in Lightroom.

  MacBook Pro El Capitan. Lightroom CC. Thank you.

  Those are probably your Flash installation disc images.  You see them on your desktop.  If so, drag them to the trash.   If they are not on your desktop, restart your computer and may disappear from the import dialog box.

• Pls explain the sense of source and destination SVI ACL

  Hi I have a home network up and well running that uses a Cisco 1801.

  I'm just trying to increase my understanding of some is the config and I'm confused by ACL on an interface VLAN.

  OK so I "be the router" and imagine packets flowing to me and me

  I have two VLAN configured

  VLAN 10 - 10.10.10.0 / 25

  VLAN 20 - 10.10.10.128/27

  So, for example, one of my Virtual Machines has the address of 10.10.10.6 and is on VLAN 10.

  Another is the 10.10.10.134 address and VLAN 20.

  I want to allow 10.10.10.6 Access 10.10.10.134, but keep the other VLAN 10 access devices.

  So I create an ACL and apply it to interface Vlan 20 entrants.

  The configuration below works as you want, but I don't understand why.

  If packet filtering is for the incoming direction of the interface, then my logic would state that the source address of the packet filter would be 10.10.10.6, not 10.10.10.134.

  Can someone help me understand. Thank you.

  interface Vlan20
  ip access-group ACL-INBOUND in
  !
  ip access-list extended ACL-INBOUND
  permit ip host 10.10.10.134 host 10.10.10.6 log-input
  			 
  That is to say, a vlan SVI is no different from a physical interface with respect to an acl.
  to apply an acl entering traffic control devices SVI in this vlan
  apply an acl Outbound IVR auxdispositifs controls traffic to that vlan
  I want to allow 10.10.10.6 Access 10.10.10.134, but keep the other VLAN 10 access devices.
  access-list 101 permit ip host 10.10.10.6 10.10.10.134
  access-list 101 deny ip 10.10.10.0 0.0.0.127 host 10.10.10.134
  access list 101 ip allow a whole
  int vlan 10
  IP access-group 101 in
  the acl above allows 10.10.10.6 to talk to 10.10.10.134 but blocks all other 10.10.10.x/25 customers to talk to 10.10.10.134. Then, it allows customers to 10.10.10.x/25 to talk to everything else. Note You can not only "permit ip any any" at the end, but you will want to probably other lines permit while I have included a general all allow.
  I hope you see it's the same concept applies an acl to a physical interface in terms of incoming and outgoing traffic. Whence came the confusion was probably that you have applied the acl to vlan 20 then he effectively blocked the return circulation and not the original packet from to vlan 10.
  It is usually best to filter packets to their source.
  Jon
  		   

• A remote VPN (link source and destination ip peer)

  Hi all

  I can access my thought of networking Office RAS VPN I have a static ip address on my home modem, now I want to create an access list, so I should be able to access to my office network through this static ip address only, I tried with given below ACL on my desktop firewall, but it did not work for me.

  Example access-list 101 permit interface host 10.0.0.1 udp outside eq 500

  access-list 101 permit interface host 10.0.0.1 esp outdoors

  Access-group 101 in external interface

  Any idea,

  Thank you inadvance

  Concerning

  Tash

  Hello guys,.

  Tash, so say you now you have purchased a static IP address for your home, and now you want your ASA to accept than intellectual property. you use the Cisco VPN Client right?

  Amatahen, you have reason sysopt connection permit VPN will allow encrypted traffic to bypass the access-group, but is not encrypted but the traffic of negotiation, because it's we´re AM going to use 3 packets (UDP 500, but if any side is at the origin of the package NAT #2 and #3 will move to UDP 4500 instead of 500)

  Filter access group by-the-box traffic is NOT employment traffic so to achieve, you need to create a group of access to your home IP but the thing, it is that your group access must be configured with the keyword for control-plane at the end., you'll also need to allow ssh, https, etc., depending on the services you run on this device.

  Kind regards

• An error occurred when opening a virtual disk. Make sure that the converter server and source running machines have network access to the ESX/ESXi hosts source and destination

  Hello, I'm trying to P2V server and you get this error.

  Conversion from one physical host to vcenter.

  I see with success, he creates the snapshot and crashes just after it.

  Thank you in advance.

  The error is: 2014-10 - 07T 19: 28:27.487 - 04:00 [warning 04752 "Default"] [, 0] NfcNewAuthdConnectionEx [NFC ERROR]: unable to connect to peer. Error: Unable to connect to the server 10.2.254.89:902
  do you have to allow you access to your physical machine to the server ESX port 902
  HTH

• FAILED: An error occurred when opening a virtual disk. Verify that the Converter server and source running machines have network access to the ESX/ESXi hosts source and destination

  Hello world

  I get this error when I try to convert a machine, this machine are in the same network with others that I had no problem to convert, the error occurred in 1% complete. I tried several other suggestions from others posts, with no luck.

  I have vmware converter 5.5.2. Someone at - it something idea?

  Thx a lot.

  Your error is:

  2014 08-18 T 06: 49:12.641 + 02:00 [10064 "Default" warning] [, 0] NfcNewAuthdConnectionEx [NFC ERROR]: unable to connect to peer. Error: Unable to connect to the server cld01vmwh18.replycloud.prv:902

  Need to allow access to the machine to be converted to cld01vmwh18.replycloud.prv:902

  HTH

• NT may respond to your request because the source files and destination are the same

  Hi, thanks for reading.

  I'm having this problem and it is driving me crazy.

  I'm actually following a tutorial that you can check it out here: http://nightshifted.Tumblr.com/post/2559360661/tutorial-paused-animations

  Basically, I'm trying to make a gif animated with canvas (I'm sorry if my English is not so great). When I try to drag the layers in the canvas (step 2 of the tutorial), I get the error: "could not complete your request because the source and destination are the same."

  can someone help me? I have CS3 and CS5 and they get the error in both.

  Thank you in advance

  I think they mean Select layers and images and using the tool move, drag

  inside the document (click inside the document window and drag) to move the

  Choose the layers to half superior (transparent area), is not to drag the layers of

  the palette of layers in the document, which would give this error.

  MTSTUNER

• Hive - Source address and Destination or a set of addresses

  I have a financial client who has a question on the Source address and Destination or a set of addresses.
  
  They must provide a Source address and destination or a set of addresses, with a mask of network. Oracle has the IP address and Netmask (s) they would need for booty? And they would be the Source or the Destination?
  
  The INVESTIGATION period would come from the server of the hive? The Bank would need specific IPs or a range of IP addresses that will be used. So if all the Beehive exists in 123.456.789.xxx, they would be able to enter like this, but it is best to identify each IP separately.
  
  Also, assuming that the Bank and Oracle are in communication, that can be at the Source and that can be the Destination?
  
  If this isn't something that we can provide them, I may need something - an explanation--give them that could soothe their needs.
  
  Any help on this would be greatly appreciated.
  
  Brent

  Brent,

  Communication between the Bank and the Beehiveonline would normally be via the IP 156.151.25.7, which is the VIP for BeehiveOnline. It would be the two-way channel for communications over https, webDAV and the owners of o and OBEO protocols.

  The only time where we all change is if you use FTPS and because we put passive channels in place data transfer channel is given to one of the Middle-thirds to handle the traffic directly Bank to Oracle would be so throuigh 156.151.25.7 until the connection is established, and then the middle of the year-groups will manage traffic between the 2 extremities-this means that the traffic is two-way on one of the 3 the ip 156.151.31.35, 156.151.31.36, 156.151.31.37 addersses

  I hope this will satisfy the Bank.

  Phil