A remote VPN (link source and destination ip peer)
Hi all
I can access my thought of networking Office RAS VPN I have a static ip address on my home modem, now I want to create an access list, so I should be able to access to my office network through this static ip address only, I tried with given below ACL on my desktop firewall, but it did not work for me.
Example access-list 101 permit interface host 10.0.0.1 udp outside eq 500
access-list 101 permit interface host 10.0.0.1 esp outdoors
Access-group 101 in external interface
Any idea,
Thank you inadvance
Concerning
Tash
Hello guys,.
Tash, so say you now you have purchased a static IP address for your home, and now you want your ASA to accept than intellectual property. you use the Cisco VPN Client right?
Amatahen, you have reason sysopt connection permit VPN will allow encrypted traffic to bypass the access-group, but is not encrypted but the traffic of negotiation, because it's we´re AM going to use 3 packets (UDP 500, but if any side is at the origin of the package NAT #2 and #3 will move to UDP 4500 instead of 500)
Filter access group by-the-box traffic is NOT employment traffic so to achieve, you need to create a group of access to your home IP but the thing, it is that your group access must be configured with the keyword for control-plane at the end., you'll also need to allow ssh, https, etc., depending on the services you run on this device.
Kind regards
Tags: Cisco Security
Similar Questions
-
Why do Shotmatch clips source and destination, both change?
When I click on a source and destination Shotmatch clip affects both. I want to clip 2 match clip 1, clip 1 is not changing.
Appreciate any ideas
Neil
I thought about it. It's my first time using SG and get used to the shape and what works when you link first. I am restoring an old film silent and discovered that I separate the shots, so it was darkening the two shots because they are in the same area of the clip. After using scene detection, it works.
However my other question is obtaining detect GD using an edl instead of the scene. My movie is 23.98 but SG think that the edl is 24. I rechecked my sequence and parameters of the SOUL to be sure but still the same issue.
Bret
-
Simultaneous source and destination NAT on PIX
Hello;
It's my first PIX configuration, and I am facing a problem; I need to do nat source and destination at the same time, and I don't see how.
The problem is I need an internal host (172.1.1.1), connection to say 172.17.20.30:5000, have IP source translated into 172.17.20.51, and translated into destination IP/port to 10.15.2.5:1414.
At the moment there is a Linux machine with iptables does work, and I need to get to work.
Thanks in advance;
Francisco.
Translate address of host b and outside port:
static (dmz1, outside) interface 80 172.16.1.1 90
Definition of HostA to dmz1 Pix interface. Make sure that you use a group nat number not in use:
NAT (outside) 7 192.168.1.1 255.255.255.255 outside
Global (dmz1) interface 7
-
Hello
SQL query to find the total number of source based nonsource passangersbetween source and destination station and passenger station on the same chekindate.
Please help on this script and let me know if you need more details.
---
You use a SELECT statement. Let me know if you need more details.
-
Once again; same problem, others have encountered but nothing seems to work.
An error occurred when opening a virtual disk. Make sure that the converter server and source running machines have network access to the ESX/ESXi hosts source and destination.
We have 1 physical servers, we need to see. Here is the environment. All 3 separated location, 3 all firewall separated
1 physical servers
-Internal IP address; 172.16.160.21
-FARM FirewallvCenter Server
-Internal IP address; 172.16.1.85
-Local Office (ALX)
Location of destination (ESXi host):
-Internal IP address; 172.16.153.20
-Firewall ROOMMATE
Already completed:VMware KB: disable SSL on VMware Converter Standalone 5.x encryption SSL disabled in converter-worker
Firewall are open / Tunnel is open throughout the environment.
I have attached the logs.
Thank you very much
POCEH; Thanks for the reply. But I wouldn't be pulling my gray hair if I knew what the problem was. I understand that there not for the peer but why...?
-
Hi all
I'm having some trouble converting server physical windows using autonomous vConverter 5.5.
error message:
"An error occurred when opening a virtual disk. Verify that the Converter server and source running machines have network access to the ESX/ESXi hosts source and destination. "
I have attached the bundle newspapers. Please notify.
See you soon...
Your error is:
2014-11 - 04T 18: 27:27.587 - 08:00 [01236 info "Default"] GetManagedDiskName: Get disklib file name as vpxa-nfcssl: / / [a0110-vmgt70-001] WIN-MOVRCVCSITG/WIN-MOVRCVCSITG.vmdk@a0110tesxhyp01.datacenter.telenorservices.com: 902! 2 b 52 87 75 03 03 ff 49-67 2f 3 a 61 76 and 00 cd e1
2014-11 - 04T 18: 27:27.587 - 08:00 [01236 WARNING 'Default'] [, 0] NfcNewAuthdConnectionEx [NFC ERROR]: unable to connect to peer. Error: Failed to search for host for a0110tesxhyp01.datacenter.telenorservices.com server address: the requested name is valid, but no data of the requested type was found
2014-11 - 04T 18: 27:27.587 - 08:00 [01236 info "Default"] Sysimgbase_DiskLib_OpenWithPassPhrase failed with 'NBD_ERR_NETWORK_CONNECT' (error code: 2338)
Check the manual on the required ports.
HTH
-
I did not know that on ESX 3.5, in order to afin de vivre live clone a virtual machine from one ESX host to another, source and destination stores had to be available. However, I'm currently cloning a virtual machine to a host in a datacenter and cluster to one host in a different data center, but the destination store is not available at the source host and visa versa.
How is that possible? This is a new feature of vSphere?
That seems to work on the console port. See this thread: http://communities.vmware.com/message/1475721#1475721
AWo
VCP 3 & 4
Author @ vmwire.net
\[:o]===\[o:]
= You want to have this ad as a ringtone on your mobile phone? =
= Send 'Assignment' to 911 for only $999999,99! =
-
Load Source and Destination =? Table does not structure the same.
Hello
I have to copy the data from the source table to the destination table. The structure of the 2 are not the same. Number of records in the destination table must be half of the number of records in the source. The reason is the source a named column (for example) c_type = 'Up' - a single line or 'Down' - in another line. What is reprsented in the destination as 1 rank since the number of columns is more. Example up_name, down_name, up_dep, down_dep.
How can I insert in the destination according to the c_type column in the source?
How can I write my sql query such that I must write an insert statement and put the right data in the right column?Example: I want to insert into destination.up_name where c_type = 'Up' and destination.down_name where c_type = 'Down'... and so on
Mass25 wrote:
Number of records in the destination table must be half of the number of records in the source. The reason is the one source > column named (for example) c_type = 'Up' - a single line or 'Down' - in another line. What is reprsented in the destination > as 1 rank since the number of columns is more. Example up_name, down_name, up_dep, down_dep.I hope that's what you're looking for:
SQL> WITH SOURCE AS 2 (SELECT 1 id_col, 'UP' c_type, 'up_name_1' name_col, 3 'up_dept_1' dept_name 4 FROM DUAL 5 UNION ALL 6 SELECT 1 id_col, 'DOWN' c_type, 'down_name_1' name_col, 7 'down_dept_1' dept_name 8 FROM DUAL 9 UNION ALL 10 SELECT 2 id_col, 'UP' c_type, 'up_name_2' name_col, 11 'up_dept_2' dept_name 12 FROM DUAL 13 UNION ALL 14 SELECT 2 id_col, 'DOWN' c_type, 'down_name_2' name_col, 15 'down_dept_2' dept_name 16 FROM DUAL 17 UNION ALL 18 SELECT 3 id_col, 'UP' c_type, 'up_name_3' name_col, 19 'up_dept_3' dept_name 20 FROM DUAL 21 UNION ALL 22 SELECT 3 id_col, 'DOWN' c_type, 'down_name_3' name_col, 23 'down_dept_3' dept_name 24 FROM DUAL) 25 SELECT * FROM SOURCE 26 / ID_COL C_TY NAME_COL DEPT_NAME ---------- ---- ----------- ----------- 1 UP up_name_1 up_dept_1 1 DOWN down_name_1 down_dept_1 2 UP up_name_2 up_dept_2 2 DOWN down_name_2 down_dept_2 3 UP up_name_3 up_dept_3 3 DOWN down_name_3 down_dept_3 6 rows selected. SQL> WITH SOURCE AS 2 (SELECT 1 id_col, 'UP' c_type, 'up_name_1' name_col, 3 'up_dept_1' dept_name 4 FROM DUAL 5 UNION ALL 6 SELECT 1 id_col, 'DOWN' c_type, 'down_name_1' name_col, 7 'down_dept_1' dept_name 8 FROM DUAL 9 UNION ALL 10 SELECT 2 id_col, 'UP' c_type, 'up_name_2' name_col, 11 'up_dept_2' dept_name 12 FROM DUAL 13 UNION ALL 14 SELECT 2 id_col, 'DOWN' c_type, 'down_name_2' name_col, 15 'down_dept_2' dept_name 16 FROM DUAL 17 UNION ALL 18 SELECT 3 id_col, 'UP' c_type, 'up_name_3' name_col, 19 'up_dept_3' dept_name 20 FROM DUAL 21 UNION ALL 22 SELECT 3 id_col, 'DOWN' c_type, 'down_name_3' name_col, 23 'down_dept_3' dept_name 24 FROM DUAL) 25 SELECT s1.id_col, s1.name_col up_name, s1.dept_name up_dept, 26 s2.name_col down_name, s2.dept_name down_dept 27 FROM SOURCE s1 JOIN SOURCE s2 28 ON (s1.id_col = s2.id_col AND s1.c_type = 'UP' AND s2.c_type = 'DOWN ') 29 / ID_COL UP_NAME UP_DEPT DOWN_NAME DOWN_DEPT ---------- ----------- ----------- ----------- ----------- 1 up_name_1 up_dept_1 down_name_1 down_dept_1 2 up_name_2 up_dept_2 down_name_2 down_dept_2 3 up_name_3 up_dept_3 down_name_3 down_dept_3 3 rows selected. SQL>
Source has 6 entries and it was self joined to give 3 records that can be filled in the Destination Table.
Always post some sample data with the desired result. That you will get quick answers.
Kind regards
JOEdited: Added citation Tags
-
Import of Lightroom - Flash player appears more than once in the source and destination
How can I remove Flash Player from the list of destinations and sources of import?
I recently had considerable difficulties, download Flash Player to view the video from the site, but now it appears more than once in Lightroom.
MacBook Pro El Capitan. Lightroom CC. Thank you.
Those are probably your Flash installation disc images. You see them on your desktop. If so, drag them to the trash. If they are not on your desktop, restart your computer and may disappear from the import dialog box.
-
Pls explain the sense of source and destination SVI ACL
Hi I have a home network up and well running that uses a Cisco 1801.
I'm just trying to increase my understanding of some is the config and I'm confused by ACL on an interface VLAN.
OK so I "be the router" and imagine packets flowing to me and me
I have two VLAN configured
VLAN 10 - 10.10.10.0 / 25
VLAN 20 - 10.10.10.128/27
So, for example, one of my Virtual Machines has the address of 10.10.10.6 and is on VLAN 10.
Another is the 10.10.10.134 address and VLAN 20.
I want to allow 10.10.10.6 Access 10.10.10.134, but keep the other VLAN 10 access devices.
So I create an ACL and apply it to interface Vlan 20 entrants.
The configuration below works as you want, but I don't understand why.
If packet filtering is for the incoming direction of the interface, then my logic would state that the source address of the packet filter would be 10.10.10.6, not 10.10.10.134.
Can someone help me understand. Thank you.
interface Vlan20
ip access-group ACL-INBOUND in
!
ip access-list extended ACL-INBOUND
permit ip host 10.10.10.134 host 10.10.10.6 log-input
That is to say, a vlan SVI is no different from a physical interface with respect to an acl.
to apply an acl entering traffic control devices SVI in this vlan
apply an acl Outbound IVR auxdispositifs controls traffic to that vlan
I want to allow 10.10.10.6 Access 10.10.10.134, but keep the other VLAN 10 access devices.
access-list 101 permit ip host 10.10.10.6 10.10.10.134
access-list 101 deny ip 10.10.10.0 0.0.0.127 host 10.10.10.134
access list 101 ip allow a whole
int vlan 10
IP access-group 101 in
the acl above allows 10.10.10.6 to talk to 10.10.10.134 but blocks all other 10.10.10.x/25 customers to talk to 10.10.10.134. Then, it allows customers to 10.10.10.x/25 to talk to everything else. Note You can not only "permit ip any any" at the end, but you will want to probably other lines permit while I have included a general all allow.
I hope you see it's the same concept applies an acl to a physical interface in terms of incoming and outgoing traffic. Whence came the confusion was probably that you have applied the acl to vlan 20 then he effectively blocked the return circulation and not the original packet from to vlan 10.
It is usually best to filter packets to their source.
Jon
-
Hello, I'm trying to P2V server and you get this error.
Conversion from one physical host to vcenter.
I see with success, he creates the snapshot and crashes just after it.
Thank you in advance.
The error is: 2014-10 - 07T 19: 28:27.487 - 04:00 [warning 04752 "Default"] [, 0] NfcNewAuthdConnectionEx [NFC ERROR]: unable to connect to peer. Error: Unable to connect to the server 10.2.254.89:902
do you have to allow you access to your physical machine to the server ESX port 902
HTH -
Hello world
I get this error when I try to convert a machine, this machine are in the same network with others that I had no problem to convert, the error occurred in 1% complete. I tried several other suggestions from others posts, with no luck.
I have vmware converter 5.5.2. Someone at - it something idea?
Thx a lot.
Your error is:
2014 08-18 T 06: 49:12.641 + 02:00 [10064 "Default" warning] [, 0] NfcNewAuthdConnectionEx [NFC ERROR]: unable to connect to peer. Error: Unable to connect to the server cld01vmwh18.replycloud.prv:902
Need to allow access to the machine to be converted to cld01vmwh18.replycloud.prv:902
HTH
-
NT may respond to your request because the source files and destination are the same
Hi, thanks for reading.
I'm having this problem and it is driving me crazy.
I'm actually following a tutorial that you can check it out here: http://nightshifted.Tumblr.com/post/2559360661/tutorial-paused-animations
Basically, I'm trying to make a gif animated with canvas (I'm sorry if my English is not so great). When I try to drag the layers in the canvas (step 2 of the tutorial), I get the error: "could not complete your request because the source and destination are the same."
can someone help me? I have CS3 and CS5 and they get the error in both.
Thank you in advance
I think they mean Select layers and images and using the tool move, drag
inside the document (click inside the document window and drag) to move the
Choose the layers to half superior (transparent area), is not to drag the layers of
the palette of layers in the document, which would give this error.
MTSTUNER
-
remote VPN on 7.2 (2)
Hello
I came across a problem with a client where configure us the vpn to access remote via ASDM and used the same name (for example, itvpn) for the tunnel-group and group strategy. After putting the ASA on the network, we have been able to connect through the VPN client, however we never saw any traffic that is decrypted at the client end.
Then I took all the config of the CLI remote vpn access-related and put them again through the CLI (instead of ASDM). The only difference I see between the two configs is the second I used another name for the Group (for example. itvpnpolicy) policy and tunnel-group(eg. itvpn). We were then able to see packets deciphered at the client end and everything worked.
Does anyone have a working configuration, where they use the same name for the group policy and tunnel-group? Am I crazy thinking that you can't use the same name for both? Just curious, if maybe miss something when we compare two configs.
Thank you!
Brad
Hi Brad,
I've seen many configurations of work with the same name. If its fine. You're certainly missing something else.
Kind regards
Kamal
-
I am at a loss, I can connect VIA VPN and Ping inside the IPs (192.168.1.2) and outside (4.2.2.2) IPs of the remote VPN client, but can't surf WWW. Inside the network, all users have WWW access and the network is fine. I'm new on the revisions to ver 8.3 and don't see what I'm missing?
Info:
ASA-A # sh xl
in use, the most used 12 4
Flags: D - DNS, e - extended, I - identity, i - dynamics, r - portmap,
s - static, T - twice, N - net-to-net
NAT inside:192.168.1.0/24 to outside:24.180.x.x/24
flags s idle 0:10:46 timeout 0:00:00
NAT outside:192.168.2.0/24 to outside:24.180.x./24
flags s idle 0:00:59 timeout 0:00:00
NAT inside:192.168.1.0/24 to any:192.168.1.0/24
sitting inactive flags 0:11:51 timeout 0:00:00
NAT any:192.168.2.0/24 to inside:192.168.2.0/24
sitting inactive flags 0:11:51 timeout 0:00:00
ASA-A #.ASA-A # sh nat
Manual NAT policies (Section 1)
1 (inside) to destination of (all) Inside_Net Inside_Net the VPN-NET VPN static static
translate_hits = 3, untranslate_hits = 3Auto NAT policies (Section 2)
1 (inside) (outside) static source Inside_Net 24.180.x.x
translate_hits = 3, untranslate_hits = 184
2 (outdoor) (outdoor) static source VPN-net 24.180.x.x
translate_hits 97, untranslate_hits = 91 =
ASA-A #.Journal of the Sho:
% 305013-5-ASA: rules asymmetrical NAT matched for flows forward and backward; Connection for udp src outside:192.168.2.10/137(LOCAL\User) dst outside:192.168.2.255/137 refused due to path failure reverse that of NAT
% ASA-609002 7: duration of outside local host: 192.168.2.255 disassembly 0:00:00
% ASA-609001 7: built outside local host: 192.168.2.255% 305013-5-ASA: rules asymmetrical NAT matched for flows forward and backward; Connection for udp src outside:192.168.2.10/137(LOCAL\User) dst outside:192.168.2.255/137 refused due to path failure reverse that of NAT
% ASA-609002 7: duration of outside local host: 192.168.2.255 disassembly 0:00:00Current config:
ASA Version 9.0 (1)
!
ASA-A host name
domain a.local
enable the encrypted password xxxxx
XXXXX encrypted passwd
names of
IP local pool vpnpool 192.168.2.10 - 192.168.2.20
!
interface Ethernet0/0
Inet connection description
switchport access vlan 2
!
interface Ethernet0/1
LAN connection description
switchport access vlan 3
!
interface Ethernet0/2
switchport access vlan 3
!
interface Ethernet0/3
switchport access vlan 3
!
interface Ethernet0/4
switchport access vlan 3
!
interface Ethernet0/5
switchport access vlan 3
!
interface Ethernet0/6
switchport access vlan 3
!
interface Ethernet0/7
switchport access vlan 3
!
interface Vlan1
No nameif
no level of security
no ip address
!
interface Vlan2
nameif outside
security-level 0
IP address 24.180.x.x 255.255.255.248
!
interface Vlan3
nameif inside
security-level 100
IP 192.168.1.1 255.255.255.0
!
banner exec ********************************************
banner exec * *
exec banner * ASA-A *.
banner exec * *
exec banner * CISCO ASA5505 *.
banner exec * *
exec banner * A Services Inc. *
exec banner * xxx in car Street N. *.
exec banner * city, ST # *.
banner exec * *
banner exec ********************************************
exec banner ^
passive FTP mode
DNS server-group DefaultDNS
domain a.local
permit same-security-traffic intra-interface
network obj_any object
subnet 0.0.0.0 0.0.0.0
network of the Inside_Net object
subnet 192.168.1.0 255.255.255.0
network of the VPN-net object
Subnet 192.168.2.0 255.255.255.0
access-list extended sheep permit ip 192.168.2.0 255.255.255.0 192.168.1.0 255.255.255.0
allowed incoming access extended gre a whole list
inbound udp allowed extended access list any host 24.180.x.x eq 1723
list of allowed inbound tcp extended access any host 24.180.x.x eq pptp
list of allowed inbound tcp extended access any host 24.180.x.x eq smtp
list of allowed inbound tcp extended access any host 24.180.x.x eq www
list of allowed inbound tcp extended access any host 24.180.x.x eq https
list of allowed inbound tcp extended access any host 24.180.x.x eq 987
inbound udp allowed extended access list any host 24.180.x.x eq 25
inbound udp allowed extended access list any host 24.180.x.x eq 443
inbound udp allowed extended access list any host 24.180.x.x eq www
inbound udp allowed extended access list any host 24.180.x.x eq 987
pager lines 24
Enable logging
debug logging in buffered memory
asdm of logging of information
Outside 1500 MTU
Within 1500 MTU
ICMP unreachable rate-limit 1 burst-size 1
ICMP allow all outside
ICMP allow any inside
don't allow no asdm history
ARP timeout 14400
no permit-nonconnected arp
public static Inside_Net Inside_Net destination NAT (inside, all) static source VPN-NET VPN
!
network of the Inside_Net object
NAT static 24.180.x.x (indoor, outdoor)
network of the VPN-net object
24.180.x.x static NAT (outdoors, outdoor)
Access-group interface incoming outside
Route outside 0.0.0.0 0.0.0.0 24.180.x.x 1
Timeout xlate 03:00
Pat-xlate timeout 0:00:30
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
identity of the user by default-domain LOCAL
Enable http server
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start
Crypto ipsec transform-set ikev1 VPN remote esp-3des esp-md5-hmac
Crypto ipsec ikev2 VPN ipsec-proposal-remotetest
Protocol esp encryption aes - 256, aes - 192, aes, 3des and
Esp integrity sha-1 protocol
Crypto ipsec pmtu aging infinite - the security association
Crypto-map dynamic dyn1 1jeu ikev1 transform-set remote VPN
Crypto-map dynamic dyn1 1jeu reverse-road
map VPN - map 1-isakmp ipsec crypto dynamic dyn1
VPN-card interface card crypto outside
Crypto ca trustpoint _SmartCallHome_ServerCA
Configure CRL
trustpool crypto ca policy
Crypto ca certificate chain _SmartCallHome_ServerCA
certificate ca 6ecc7aa5a7032009b8cebcf4e952d491
308204 4 a0030201 d 308205ec 0202106e cc7aa5a7 032009b 8 cebcf4e9 52d 49130
010105 05003081 09060355 04061302 55533117 ca310b30 0d 864886f7 0d06092a
30150603 55040 has 13 0e566572 69536967 6e2c2049 6e632e31 1f301d06 0355040b
13165665 72695369 676e2054 72757374 204e6574 776f726b 313 has 3038 06035504
0b 133128 63292032 30303620 56657269 5369676e 2c20496e 632e202d 20466f72
20617574 7a 656420 75736520 6f6e6c79 31453043 06035504 03133c 56 686f7269
65726953 69676e20 436c 6173 73203320 5075626c 69632050 72696 72792043 61 d
65727469 66696361 74696f6e 20417574 686f7269 7479202d 20473530 1e170d31
30303230 38303030 3030305a 170d 3230 30323037 32333539 35395a 30 81b5310b
30090603 55040613 02555331 17301506 0355040a 130e5665 72695369 676e2c20
496e632e 311f301d 06035504 0b 131656 65726953 69676e20 54727573 74204e65
74776f72 6b313b30 5465726d 20757365 20617420 73206f66 39060355 040b 1332
68747470 7777772e 733a2f2f 76657269 7369676e 2e636f6d 2f727061 20286329
302d 0603 55040313 26566572 69536967 61737320 33205365 6e20436c 3130312f
63757265 20536572 76657220 20473330 82012230 0d06092a 864886f7 4341202d
010101 05000382 010f0030 82010 0d has 02 b187841f 82010100 c20c45f5 bcab2597
a7ada23e 9cbaf6c1 39b88bca c2ac56c6 e5bb658e 444f4dce 6fed094a d4af4e10
9c688b2e 957b899b 13cae234 34c1f35b f3497b62 d188786c 83488174 0253f9bc
7f432657 5833833b 330a17b0 d04e9124 ad867d64 12dc744a 34a11d0a ea961d0b
15fca34b 3bce6388 d0f82d0c 948610ca b69a3dca eb379c00 48358629 5078e845
1941 4ff595ec 7b98d4c4 71b350be 28b38fa0 b9539cf5 ca2c23a9 fd1406e8 63cd
18b49ae8 3c6e81fd e4cd3536 b351d369 ec12ba56 6e6f9b57 c58b14e7 0ec79ced
4a546ac9 4dc5bf11 b1ae1c67 81cb4455 33997f24 9b3f5345 7f861af3 3cfa6d7f
81f5b84a d3f58537 1cb5a6d0 09e4187b 384efa0f 01 has 38201 02030100 df308201
082b 0601 05050701 01042830 26302406 082 b 0601 db303406 05050730 01861868
7474703a 2f2f6f63 73702e76 65726973 69676e2e 636f6d30 12060355 1 d 130101
ff040830 02010030 70060355 b 200469 30673065 060, 6086 480186f8 1 d 060101ff
45010717 03305630 2806082b 06010505 07020116 1 c 687474 70733a2f 2f777777
2e766572 69736967 6e2e636f 6d2f6370 73302 has 06 082 b 0601 05050702 02301e1a
1 c 687474 70733a2f 2f777777 2e766572 69736967 6e2e636f 6d2f7270 61303406
03551d1f 042d302b 3029 has 027 a0258623 68747470 3a2f2f63 726c2e76 65726973
69676e2e 636f6d2f 2d67352e 70636133 63726c 30 0e060355 1d0f0101 ff040403
02010630 6d06082b 06010505 07010c 59305730 55160969 5da05b30 04 61305fa1
6 d 616765 2f676966 3021301f 2b0e0302 30070605 1a04148f e5d31a86 ac8d8e6b
c3cf806a d448182c 7b192e30 25162368 7474703a 2f2f6c6f 676f2e76 65726973
69676e2e 636f6d2f 76736c6f 676f2e67 69663028 0603551d 11042130 1fa41d30
1 b 311930 17060355 04031310 56657269 5369676e 4d504b49 2d322d36 301D 0603
445 1653 44c1827e 1d20ab25 f40163d8 be79a530 1f060355 c 1604140d 551d0e04
1 230418 30168014 7fd365a7 c2ddecbb f03009f3 4339fa02 af333133 300 d 0609 d
2a 864886 05050003 82010100 0c8324ef ddc30cd9 589cfe36 b6eb8a80 f70d0101
4bd1a3f7 9df3cc53 ef829ea3 a1e697c1 589d756c e01d1b4c fad1c12d 05c0ea6e
b2227055 d9203340 3307c 265 83fa8f43 379bea0e 9a6c70ee f69c803b d937f47a
99 c 71928 8705 404167d 1 273aeddc 866d 24f78526 a2bed877 7d494aca 6decd018
481d22cd 0b0b8bbc f4b17bfd b499a8e9 762ae11a 2d876e74 d388dd1e 22c6df16
b62b8214 0a945cf2 50ecafce ff62370d ad65d306 4153ed02 14c8b558 28a1ace0
5becb37f 954afb03 c8ad26db e6667812 4ad99f42 fbe198e6 42839b8f 8f6724e8
6119b5dd cdb50b26 058ec36e c4c875b8 46cfe218 065ea9ae a8819a47 16de0c28
6c2527b9 deb78458 c61f381e a4c4cb66
quit smoking
Crypto ikev1 allow outside
IKEv1 crypto policy 1
preshared authentication
3des encryption
sha hash
Group 2
life 43200
Telnet timeout 5
SSH timeout 5
Console timeout 0dhcpd outside auto_config
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
user name UName encrypted password privilege 15 xxxxxxxxx
type tunnel-group remote VPN remote access
attributes global-tunnel-group VPN-remote controls
address vpnpool pool
tunnel-group, ipsec VPN-remote controls-attributes
IKEv1 pre-shared-key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
inspect the icmp
!
global service-policy global_policy
context of prompt hostname
anonymous reporting remote call
Cryptochecksum:43db9ab2d3427289fb9a0fdb22b551fa
: endHello
Its propably because you do not have a DNS server configured for VPN users. Try this command:
group-policy DfltGrpPolicy attributes dns-server value 8.8.8.8
Maybe you are looking for
-
Communication by internet WiFi modem with wireless router
I have a WIFI modem by the internet provider. My office is on the other side of the House where there is no internet signal. Is it possible to get a WiFi router that reads the WiFi signal, which will be the Ethernet Ports, could I link all my comput
-
A8 Lenovo support for controller ps3 Bluetooth (a5500-f)
Hi, I got a lenovo a8 and has been trying 2 connect to my ps3 controller using a cable otg, it worked well, but the main reason was if I could use it wirelessly with Bluetooth. But it runs upward on the blue tooth settings to connect he tried various
-
PXI-6229 gives error 200019 when they acquire more input 25ch
Hello I'm trying to measure voltages with the PXI-6229 32ch and PXI-8106. If I build attached VI and it works very well when acquiring less entered 26ch defining "Physical channel" VI "PXI1Slot2 / ai0:25". I think that the PXI-6229 32ch of analog inp
-
It is worth the upgrade / Pavilion dv6880se Special Edition flow
Looking for assistance in this small matter. Wondering what are the improvements that I can add to my laptop HP Pavilion dv6880se Special Edition influx. I intend to use it mainly for the delivery of some programs DJ and Photoshop Elements. I know
-
Vista Home Premium SP1, Windows Update error 'WindowsUpdate_80070643 '.
I accidentally posted this in the wrong fourms before, so I'm reposting here and crossing my fingers. I was scrolling pages and pages pf interwebs all day and my eyes is to look for bleeding :( When I try to install the updates, I always get this err