Simultaneous use of Bluetooth and Wifi

Similar Questions

• 5701ng HP Jet 7: flight Mode is AS WELL AS Bluetooth and WiFi - why?

  My HP Jet 7A (during awhile now, otherwise the whole - not sure how far behind he'll), had the Action Center Flight Mode button 'on' as well as WiFi and Bluetooth on startup in Windows. Flight on this tablet mode seems to have 3 positions after the start and not just on or off. If the flight Mode button is lit with WiFi and Bluetooth as it became after just re-start in the Tablet, if I type a time, flight Mode button stays on (on) and Bluetooth and Wi - Fi will be off (go their gray buttons). Tapping new Flight Mode will make the flight Mode button go off / gray, then Bluetooth and WiFi will come back on - as expected if then, it works as expected but why is airplane Mode on when it starts Windows 10 in the first place.

  Did someone else gets this strange behavior of flight Mode?

  Ago my 8 stream do the same. Airplane mode is highlighted as well as Wifi and Bluetooth (if enabled).

  I went through the fixes as well but no solution. Although Wifi / Bluetooth works fine if the airplane Mode is on or not.

  Its not just tablets of HP for this problem. Seems to be a Windows problem. Maybe MS will come out an eventuntually fix.

• HP 14-r019tu: need bluetooth and wifi driver

  I already install all drivers for my HP 14-r019tu by http://support.hp.com/us-en/product/HP-14-r000-Notebook-PC-series/6874538/model/7234387/drivers?cc=u...

  but I can not find the driver for bluetooth and wifi. Thanks for your help

  Hello:

  Here are links to drivers for BT you need and wireless...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-131223-1 & CC = US & DLC = in & LC = on & JumpID = reg_r1002_usen_c-001_title_r0004

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-130390-1 & CC = US & DLC = in & LC = on & JumpID = reg_r1002_usen_c-001_title_r0016

• PC(ENERGY: My Bluetooth and wifi not working. pour ordinateur portable HP-15d005tu)

  Unfortunately my laptop Bluetooth and wifi driver uninstall and remove, this is why my laptop Bluetooth and wifi work not... my laptop computer product name is PC (ENERGY STAR) for laptop HP-15d005tu.

  Pls help me...

  

  SDJL wrote:
  

  Hi @Abhi9,

  Here is a document that you can follow the steps on it for troubleshooting and upgrading the drivers:

  HP PC - Troubleshooting wireless network and Internet (Windows 8)

  Let me know if you can reinstall the driver, and what message received you in troubleshooting.

  It's my computer laptop screenshoot... my laptop computer wifi background also does not work... Please help me...

• HP 14-r053TU: Driver Bluetooth and Wifi driver HP 14-r053TU for Windows 7 (64-bit)

  If please get bluetooth and Wifi driver HP 14-r053TU for Windows 7 (64 bit) operating system. I found the driver in the driver for this device download page.

  Hello

  Please try:

  For the wireless:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_131223_1

  Bluetooth:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_130390_1

  Kind regards.

• temporarily, the computer freezes and buzzes then restarts then simultaneously using spider solitaire and play itunes worked fine util is about 2 weeks.

  Fix a computer temporarily freezes and buzzes, then restarts when simultaneously using spider solitaire and playing itunes worked fine util is about 2 weeks. Dell vostro, windows 7, office 10, itunes 10.6.3

  Help!

  Hello

  1 done only if you use iTunes and solitaire spider together?

  2 have you made any changes to the computer before the show?

  Method 1: Uninstall and reinstall ITunes and see if this is useful:

   

  Reference:

  Uninstall or change a program:

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

   

  Method 2:  Put the computer in a clean boot state and see if that helps.

  A clean boot to test if any element of service or third party application startup is causing this issue.

  Reference:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/929135

  Note: When you're done to diagnose, follow step 7 in the article to start on normal startup.

   

  Method 3: Restore the computer to a date when it was working fine before.

  Reference:

  System Restore: frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

• Satellite A300 - 15 c - WLan hangs the simultaneous use of BT and WLan

  Hello

  I bought laptop Toshiba Satellite A300 - 15 c last month.
  I run Wifi and Bluetooth simultaneouly. Connect WiFi broke.
  Then I turn off Bluetooth and it worked perfectly.

  How do I change frequency Bluetooth or why it doesn't simultaneouly with Bluetooth?

  I have laptop of less than 10 metres from the Access Point with 8.5dBi outdoor antenna and the signal is not.
  Another Access Point is 20 meters from the antenna and it works at full speed.
  Why signal is not?

  I have Windows Vista Home Premium with the latest drivers.

  Ales Pospíchal

  Hello

  What do you mean by crash?

  > Other Access Point is 20 meters from the antenna and it works at full speed
  This means you can receive another point of access correctly WiFi signals using BT and the WLan together?
  If this is the case, then it might be a compatibility problem with your another WLan router.

  I m not very well what WLan card you have, but I recommend to update the driver WLan first and the BIOS if available.

• Bluetooth and WiFi 5 GHz - XPS 13 '' Or ''.

  Hello.

  I bought a new Dell XPS 13 edition gold (I think this is the model 9550) 3 days ago and it arrived today. Out of the box, I'm not able to connect to WiFi 5 GHz networks or pair / connect with 2 adapters bluetooth audio.

  When I try to pair with an adapter bluetooth audio by clicking on "Sign in" from the system tray notification Center, I am able to see the pair of devices, but get the error message "Unable to connect" yellow. I tried to connect to a Sony XB950 bluetooth headset and a bluetooth-to-optical audio receiver Belkin HD 955).

  When I try to connect to a Wifi 5 GHz network (using my own Cisco 2702i enterprise access point, or my ASUS RT-AC66U friends), I can see the little icon of WiFi in the bar spots disappear and reappear several times, with a red X over the icon. After flashing several times, I get the error "unable to connect to this network. I can connect successfully to 2.4 GHz networks, but not 5 GHz ones.

  I installed all the updates of Windows and installed all updates through the "Dell Update" utility. This figure includes an update of the firmware. I also tried to uninstall the Bluetooth and Wi - Fi adapters via the Windows Device Manager. The drivers for the two adapters are completely up to date as of this post.

  The "Dell 1802 A" being used for the WiFi and Bluetooth adapter, I think I have a bad adapter? Please notify.

  So after digging for a while, I came across the post following in another Dell Community forum:

  http://en.community.Dell.com/TechCenter/OS-applications/f/4613/t/19634843

  Apparently, the Broadcom WiFi adapter supplied with the new XPS laptops has a boatload of interoperation with WiFi APs and bluetooth devices, reported by many in this thread and the problems this forum as well.

  I took a chance with the WiFi card with the next Intel 7265 card replacement:

  http://www.Amazon.com/Intel-7265-IEEE-802-11AC-Bluetooth/DP/B00RCZ4I6S?ie=UTF8&PSC=1&redirect=true&ref_=oh_aui_detailpage_o01_s00

  And IMMEDIATELY, the problems are solved. 5 GHz connectivity has no problem with ~ 20 gigabytes of data transferred via the connection from installation, and bluetooth problems are also completely missing. I have to say, so shameful, I had to do this with a ~ laptop $1400. It's too late to return this laptop because I have already opened up to replace the card and therefore cancelled the guarantee. I have yet to see any recognition of the problem by Dell, despite many long discussions on other forums on issues specifically affecting the above Broadcom.

  Someone else who chooses to replace the Wifi card, make sure you uninstall both the 'DW WLAN Card' and the bluetooth software "WIDCOMM" of the Control Panel before installing a replacement card.

  Once again, crazy I had to do with such a cheap laptop... I will think hard on the purchase of Dell in the future.

• How many phone numbers can be connected simultaneously, use the most and merge buttons

  How many numbers phones can be connected at the same time, use the most and fusion of the buttons after you make the first call?

  It depends on your operator.

  It's been a few years since I've really looked into it, but I think that AT & T supports up to 5 concurrent calls. I know that other major U.S. carriers support less, but I don't remember the exact numbers. I want to say that Verizon and Sprint are in charge 3 and T-Mobile supports 2, but my memory on this subject is blurred.

  Contact your operator for more information.

• Simultaneous use of ctr0 and ctr1

  I am writing a program that will lead the two lasers with a modulation of the square wave and who reads the data synchronized with the modulation. Must that I control lasers using two channels of the AO and that (actually I want to trigger IT starts when the AO is rising or falling). I want to start the tasks of the AO and keep the lasers (e.g., continuous mode) running while only a finite number of samples is taken for measures to HAVE it. For this, I tried to use the counters all together, that is I use the meter to trigger both the AO and tasks of HAVE it. This works well if I am doing this for one of the lasers, but whenever I try to use both of them I get an error (-89137);

  AQmx writing (analog 1-d Wfm NChan NSamp) .vi:1
  Property: Start.DigEdge.Src
  Property: Start.DigEdge.Edge
  Source device: Dev1
  Source Terminal: Ctr0InternalOutput
  )

  Note that I have one of them triggered off ctr1 and the other off ctr0, which I think should provide independent scrutiny, but I think that they are somehow interferes with the other.

  I would appreciate any help in getting it works! I have attached the code examples which usually shows what I'm trying to do. Note that the first task works, but the second task gives error. If you order the same thing happens (i.e. 1st task work, second fails). Note that in the example code here I left out the part where I would actually then acquire samples HAVE (who would just a moment to have a loop that starts the collection HAVE, samples and stop collection of HAVE it).

  Thanks for your help!

  If you did a search for this error code or message, you would have seen many posts related and all provide the same answer. You have a clock unique convert for analog output and the DAQmx driver not to create more than one task for the resource. As you have already noted, you can use a single task with several channels.

• can simultaneously use the mse and windows defender

  my query is that I can use the two Microsoft security essentials and windows defender in my windows xp service pack 3?

  See: "Windows Defender and Microsoft Security Essentials.

• I have Prolink TW8 with Windows7 home premium. But the material Bluetooth and wifi are not displayed. is there a way out?

  I have installed the drivers of Aerothes but still does not help. It is also not shown in Device Manager,

  Hello

  Method 1:

  I suggest you run the Microsoft fixit tool and check.

  Hardware devices not detected or does not work - a Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Method 2:

  I also suggest you to see the links and check.

  Add a Bluetooth device to your computer
  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-enabled-device-to-your-computer

  Add a Bluetooth device or other wireless or network device: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-or-other-wireless-or-network-device-frequently-asked-questions

  Method 3:

  I suggest you to see link and check.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

• Cannot simultaneously use vector art and dynamic forms?

  I was responsible for creating an online order form, and it seems that beign able to use vector graphics is the key to the design of the form. Dynamic form elements are also absolutely necessary - all the information has to fit on one page (and fortunately, most are mutually exclusive, allowing only the fields necessary to appear).

  Unfortunately, when I do a page of the form layout in Illustrator and import it into LiveCycle, I seem to be unable to use the drawing tools (specifically, lines and text, that both I need). I tried to save the file in a dynamic form, but only the opportunity to save it as a static form is displayed.

  Y at - it something I am doing wrong, or I'm going to have to choose between the use of vector graphics and dynamic form options?

  Fix. You can import the static PDF file work and then add the form objects.

  Steve

• PALM os and Wifi

  Palm is getting hurt badly by not putting WIFI on their PALM OS, like Treo smartphone device.

  Our company was about to buy a large number of smartphones, we tried with Windows Mobile devices, but had problems with them.  We would have preferred PALM os devices, but we needed to WIFI in order to synchronize with our Groupwise server.  But NOT the only ONE A Treo supports WIFI.

  So we had to buy buggy HTC Windows Mobile devices, since no carrier provides the devices Symbian here and our system does not support the iPhone either.   Once more we must with inferior products from Microsoft because of the lack of choice.

  Time for a long story...

  When PalmOS has been developed WiFi and Bluetooth were not at the stage of development where they were viable for commercial use. First devices had no radios, then infrared has been added.

  Handspring managed to stall the cellular radio on PalmOS feature, which is not an easy task.

  WiFi on PalmOS was on the wish list of Palm in 2003 when Palm spinoff of the software division, PalmSource, now owned by access to the Japan society. At the same time, Palm acquired Handspring.

  Over time, we found that it was not possible to have a cell radio, Bluetooth and WiFi simultaneously running on a device running PalmOS. Only two radios could work. Training of end-users to close some radios in order to be able to use the other radios does not fit into any form of usability or the Zen of the Palm.

  As such, PalmOS devices with phone portable radios do not have WiFi radios.

  Meanwhile Palm has worked on a new operating system entirely, who according to media reports, beginning on a product in 2009. No details are available.

  Message relates to: Palm TX

• My iMac does not detect my C309g-m as a scanner via bluetooth or wifi.

  Somewhere between Snow Leopard and 10.7.3, my iMac stopped detecting my C309g-m as a scanner with bluetooth and wifi.  I can still print via bluetooth and wifi without problem, but "print and Scan", "Image Capture", and "Preview" not to recognize the C309 as a scanner.

  I uninstalled the HP Photo Center, but didn't know that there was a 'scrubber' option until after the forums up. Accordingly, I still have the package installed driver somewhere in the interiors of my computer.  It is a 3.3.3 package by car.

  Any help will be greatly appreciated!

  Hello

  As the software was partially removed, please follow the steps below to ensure that pilots are not damaged:

  1. open the Applications folder.
  2. go to the Utilities folder.
  3. double-click on disk utility.
  4 Select the hard disk that contains the boot volume.
  5. go to the first aid tab and select Repair disk permissions.
  Note: This process may take several minutes depending on the Mac and the amount of the permissions that need to be repaired. The journal of the progress will tell you when the process is complete.

  Then, download and install the latest HP Printer Drivers 2.8 below package:

  http://support.Apple.com/downloads/DL907/en_US/HPPrinterDrivers2.8.dmg

  Finally, reset the printing system and reconfigure the printer:

  * Be aware that reset the printer system will eliminate any existing queue and reset all custom settings driver.

  Click on the Apple menu and then click on System Preferences.
  Select Print & Scan.
  Right click (or Ctrl + click) your product with the Printers list in the left panel and then click on reset printing system.
  Click OK to confirm the reset.
  Type your user name and password.
  Click OK. The printing system resets.

  Now, click on the Plus sign and select the pritner listed as Hello in the default tab.

  Now, check if you can scan using Print & Scan or one of the other methods described below:

  http://support.HP.com/us-en/document/c01910186

  It is not supported to scan from the front panel of the printer without a full feature software, so it's expected.

  About Webscan EWS option, the page overview only scanning, in order to save the page scanned, you should right click (CTRL + left click Mac keyboard), then save the file in the contect menu.

  Please let me know any changes during the scan to Print & Scan after installing the package.

  Kind regards

  Shlomi