My iMac does not detect my C309g-m as a scanner via bluetooth or wifi.

Similar Questions

• Lightroom does not detect my D800 when trying to attach via attached USB cable

  Please can someone help with this problem, lightroom does not detect my Nikon D800 via attached USB cable, I use my IMac and OS x El Capitan 10.11.1 version

  Kevg salvation,

  Attach with Nikon cameras are currently not supported on Mac 10.11.1

  Reference: https://helpx.adobe.com/lightroom/kb/lightroom-and-el-capitan---mac-os-10-11.html

  Concerning

  Sarika

• iMac does not detect HP Officejet 6500 a

  Hello

  I run on Lion OS10.7. You have just purchased HP OfficeJet 6500 a and the printer says it is connected to the network already. Then when I did my HP software setup, all went well at the stage where the implementation of the printer. I plugged in the usb cable and it reverted to the name of the printer. I click on the option to install wireless and that's where is gives my this error msg:

  "Wireless network settings have been successfully downloaded to your device. However, your Mac could not locate the device on the network. »

  My iMac is connected to the network. My iMac firewall is turned off. How can I fix it? its been 4 days since I tried. Is this a problem with the driver being sound in the Lion operating system? Things I've done:

  1/download the latest version of the software

  2Downloaded the latest firmware

  I use my router HuaWei H256.

  Waiting for your answer...

  I think that your router doesn't support Hello, the Protocol of communication between your Mac and a printer on a network.  Make sure the firmware on the router is up-to-date.

  If this does not work, your next best choice is to get a standard more router (Netgear, Linksys, etc.), sorry.

• My new airport does not detect my existing WiFi network, I can connect only via the LAN.

  Bought a new airport 1 TB TimeCapsule and I wanted to add to my existing via a WLAN network. It does not detect it and I can connect only via the LAN. What I am doing wrong?

  Unfortunately, unable to connect to a 3rd time Capsule part wireless using a Wi - Fi.

  You need to connect to the time Capsule to your existing modem/router using a wired Ethernet cable connection, permanent... like the Time Capsule Setup Guide illustrates.

  

  If you really don't want the time Capsule to connect using the wireless... she can do... If it gets a signal to another Apple wireless router. So if you were ready to add another Apple... as an AirPort Extreme router... and connect it to your existing Ethernet cable router/modem and configure AirPort Extreme to broadcast a wireless signal... .then.. .the Time Capsule would be able to connect in this way, assuming that he is where he can receive a good quality of AirPort Extreme wireless signal.

• Windows XP does not detect any internet at all despite the computer with the modem to work.

  I recently installed Windows XP Professional on my new iMac via bootcamp.  While Windows itself works fine, it won't connect to internet at all.  Despite being connected to a modem ADSL via a Ethernet cable, and also have wireless internet, Windows does not detect any signal.  On the internet in the Control Panel, all connections page that appears is "1394 connection" under the heading "LAN or Internet high speed."  I tried several times to put in place a new internet connection through the Setup Wizard and everytime, no internet is detected.

  I know that the modem works because all the other computers in my house are fine online, including on the side of Mac of the iMac.  If anyone has an idea as to how I should resolve this problem, your help would be greatly appreciated!

  Thank you

  Daniel

  Moreover, these are things I've already tried:

  I've tried to manually and automatically set up an internet connection
  I spoke with my ISP, the modem works fine
  I have re-partitioned the hard drive and reinstalled XP

  The "1394 connection" is the IEEE 1394 (FireWire) from your computer.  There should be cable system and under the heading wireless connections "LAN or Internet high speed."   There is no need to run the Network Setup Wizard or set up a new connection.

  Open the Device Manager (Start > run > devmgmt.msc ) and go to the network adapters section.  You may need to install the drivers for them.

• HP configuration wizard does not detect my wireless network.

  Hello

  I have a HP Photosmart C4580 multifunction device for a few years, works as a printer/scanner wireless for the household. In the House, we have an iMac, a Macbook Air and two computers HP laptop.

  Last weekend I bought a MacBook Pro in lieu of the iMac and a router Airport Extreme Base Station to replace my ISP provided. Since then, I can't have the printer hooked up again.

  All the wireless devices in the House for example iPad, iPhones etc connect the new router without problem so I'm glad that the wireless signal is OK.

  I downloaded the latest HP Setup application and it ran with the printer connected by USB to install on the MacBook. However, even if the USB device is detected when I try to configure it to the wireless, the installation software does not detect my wireless network.

  I tried the following: -.

  -Rebooted router

  -Reset default printer is turned off, unplug the unit and unplugged the cable, left for 30 seconds then reconnected again.

  -Created a new comments system.

  -The router is configured to run g and n network.

  -The network names have any unusual characters.

  -Tried to enter the name manually.

  USB printing is fine.

  Is there something about the installation wizard that can not locate networks?

  OK, on the front of the printer, go to wireless menu and restore the default settings.

  When you start the HP software to connect the wireless printer, make sure that the USB cable is NOT connected to the printer.  Only connect when the software tells you to do.

  Be careful with the comments network, if your computer or printer connect you will not be able to print.

• My mac does not detect my hard drive after the upgrade. How to solve this problem?

  My mac does not detect my hard drive after upgrading to Mac OS Sierra. How to solve this problem?

  Please provide more detailed information. You can read write an effective communities of Apple support question. Maybe you could open disk utility and take a screen snap so that we can see what you see.

  To post a screenshot

  1. Press command + shift + 4, that will change the cursor to the line of sight.
  2. Hold down the mouse button and the collimator allows you to select the part of the screen you want to capture.
  3. Release the mouse button and the image will be saved on your desktop.
  4. Click on the camera icon in the toolbar of the message forum Editor.
  5. Drag the image on the button select a file and click the Insert button.

• does not detect external hard disk

  Hey guys

  Recently I update my macbook pro (2014) in the sierra of mac os. Since then, my mac does not detect any external hard drive I plug in it even if these drives are detected by the PC and all the files inside. I tried to open utility disk where the hard drive is displayed but the 'volume' located below is gray. When I try to hit mount said volume that nothing happens. All I could do to fix this?

  Thank you in advance.

  Hi sgerolio,

  I understand that you are unable to detect any external drive that you plug into your MacBook Pro, since you upgraded to macOS Sierra.  How many external hard drives work?  How they are formatted?   If formatted for PC, they would not necessarily be able to be read by a Mac.

  You have a small empty external drive or USB key that you can test?  Formatted in Mac OS extended (journaled).  Using the Finder, you are able to see the external drive and drag a file to it?

  The title of the article includes the Aperture application but apply these tips to format an external hard drive to any software application.

  Drives external format Mac OS extended before using with opening

  Take care.

• iMac does not recognize the hard drive device

  iMac does not recognize my new WD My Passport for Mac external hard drive.

  I have a late 2009 21. 5-inch iMac with Mac OS X Lion 10.7.5 version and I have USB 2.0 ports.  Memory is 4 GB 1067 MHz DDR3.

  I made sure that my Finder preference displays drives and external drives.  I tried to see if would recognize a DVD and it does.

  I was hoping to save my data to be transferred to a new Mac.

  Any help will be appreciated

  Hello amfisher,

  Thank you for using communities Support from Apple!

  If I understand correctly, you are unable to see your new external drive to an iMac 2009.  I'll be happy to try to help with this.

  So that your iMac to see it, it may be necessary to reformat the drive. The best format for use with your Mac's OS X Extended (journaled).

  Format an external hard drive for use with a Mac

  1. Connect the hard drive to a USB port on your Mac.
  2. Open disk utility.
  3. On the left side of the disk utility window, select your external drive (or one of its partitions).
  4. Click the delete or delete button on the toolbar.
  5. On the Format menu, choose Mac OS extended (journaled).
  6. Type a name for your drive, and then click clear.
  7. After that the drive is deleted, close the disk utility window.

  This should allow you to copy files to the disc.

  Your computer has software called Time Machine.  It is a fantastic software for backing up your computer.  Information on how to use Time Machine is available here:

  Use Time Machine to back up or restore your Mac.

  Using Time Machine is usually the best way to move all your files from one Mac to another Mac.

  Have a great day!

• iMac does not start after 10.11.6

  Since the 10.11.6 patch my IMac does not start with my hub plugged.

  Everyone

  I assume you mean a USB hub? What does do when it's plugged in? It starts successfully when the hub is not plugged? If so, I would say that something is wrong with the hub or there is a problem with the port it is plugged or something plugged into the hub.

  Try to plug it into a different USB port on your Mac.

• Does not detect the hdmi cable more (very specific scenario)

  Well then...

  Got a monitor 15-HD to hdmi cable and a mac laptop (13 in the retina).

  So when I got all that I put it all together and it worked. I left because there a little bit, everything is plugged in and did not return for some time, so my mac fell asleep at the time wherever I went. Disconnected everything to relax on the couch. I went back and all plugged together again except that now the mac does not detect the cable. Tried a bunch of things with it. Restart, unplug the unit, detection manually, etc...

  Since the monitor is used and recently purchased cable, I thought time to them to test first. Got a laptop PC and plugged into the cable. The monitor and cable worked.

  Tried to connect my mac to the TV with my ps4′s hdmi since I did that a lot before. Also works.

  The problem is literally the combination between the cable and the mac. Which is a problem since I got the reason was to serve as my mac.

  During my research, I saw that specifically leaving the connected hdmi where sleeps your laptop can spoil it supposed to be... I saw it one time so idk if it's true, but it happened to me... and no, it wasn't really a solution when I came across that. Tried Googling this specific problem, but did not meet anything since my problem seems so specific.

  Fast forward to the next day and tried again now that both had little respite between them. Plugged into the HDMI and my laptop starts fading and return to a black screen. The screen would go black usually and so the laptop screen and the monitor would appear once again. sauf_que this time that there not, he just kept it and the monitor has not changed (Yes) it's). Not wanting to let him do that too long I unplugged and tried a different port with an adapter, I have also, since I did 3 holes I could use this for might as well try them all again. But unfortunately, I don't have it trigger anything again. So I went through another round of troubleshooting to try to make it work, but here I am, trying to see if anyone else has had this problem and solved. I am back to wait another day I guess and just hope. If not idk what to do, except maybe to get another cable? I don't know if this would solve it well.

  Hello Kaida W,.

  Thank you for reaching out to the Apple of community support. I'll do everything I can to help you get your monitor works as expected. Our first step would be to restore your System Management Controller (SMC) that allows to manage systems of different material on your Mac. This article will guide you through reset:

  Reset the management system (SCM) controller on your Mac.

  Try it and tell us how it goes. The entire community is here to help.

  Best regards-

• My iMac does not read DVD

  Hello

  My iMac does not read DVD. Every time when I put in DVD (free or with content), it runs for a while and that he died. CD works for most very well, but sometimes they go inside and the drive is not recognized. And also sometimes the DVD drive is not recognized in ¨informations on system"in the Apple menu.

  Thank you

  Matouš PIkous

  Did you use a cleaning CD in the optical drive?

• HP Support Assistant on my laptop or desktop does not detect the other machine.

  HP Support Assistant on my desktop or my laptop does not detect the other machine.  They are both on the same network.  Both are HP machines. Both are running Windows 10.  Is normal.  I would like to kind of monitor my desktop with my laptop when I'm away from home.

  @bmedbury

  The behavior you describe is normal - the HP Support Assistant is a program "per computer", in other words, each program HPSA lies and keeps track of just a computer on which the program is installed.

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• Cannot install Win 8 - Satellite Pro C660 does not detect HARD drive

  Hello

  My HARD drive died, so I decided to upgrade my Satellite Pro C660 - 1 9 to an SSD.
  I made a USB bootable with Win8 and starts very well.

  The problem is that it does not detect my SSD, so I can proceed with the installation.
  SSD appears in BIOS but not in Windows Installer.
  He said that there is a missing driver.

  I downloaded the AHCI drivers (XP, only ones available) and even in this case, after you have selected the only rider that appears, it says no new device found.

  I tried to change the SATA from AHCI mode to compatibility mode and it's the same thing...

  What can I do?

  Thanks for the help.
  Best regards
  Bruno Moreira

  More old Windows XP need a driver AHCI Intel's but I think this isn't a problem with SATA driver missing because as far as I know Windows 8 as well as Win 8.1 already contains the drivers to recognize the SSD or HARD disk drive.
  In addition, the installation of the OS should be possible even if the driver would be added for this procedure, you must use the "compatibility" mode
  As you say, the compatibility mode is not working too, so I think there is another problem.

  However, page driver Toshiba also provides a driver Intel RST (Intel Rapid Storage Technology) (Windows 8 - updated) you can try to add during the installation of the OS.

  But I m wondering if you would be able to install this Win 8 on common SATA HDD.
  Have you tried to format the SSD using a different computer, then install Win 8?
  Give it a try.

• Tecra Z50-A-11V: new SSD but earn 8.1 does not detect

  We bought a M550 Crucial 256 GB drive and you want to replace in a Toshiba Tecra Z50 - Av1

  We don't want to make any transfer of data or cloned.
  We want to do a clean install with Windows 8.1
  The BIOS recognizes the SSD

  But when you install Windows 8.1 doesn't detect any disk connected to the device and asked additional drivers. Windows does not detect the drive

  https://www.dropbox.com/s/mlvk6v3lxzi1rrh/2014-05-04%2009.47.18.jpg
  https://www.dropbox.com/s/fr2eo5l9xonaoln/2014-05-04%2009.48.59.jpg
  https://www.dropbox.com/s/8usxog8wm06funr/2014-05-04%2010.06.09.jpg

  I have also tested with version lasted this driver (old F6 to start to locate the hard disk driver)

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=23496&lang=eng&wapk w = f6flpy-x 64.zip

  and with toshiba package
  http://support.Toshiba.com/support/viewContentDetail?ContentId=4004211
  You can see that I have the version 3.20 BIOS. Interestingly, I see that the last one is the Toshiba has released version 3.1

  But still the CRUCIAL drive is not recognized by the instalation of windows startup

  The problem is similar with ubunto, kubuntu,... the drive is detected by the BIOS, but not for the OS.

  any help?
  Thank you

  Hello

  You solved this problem?
  Could you install system 8.1 Windows on this SSD drive?

  I think that the installation of additional drivers during the setting procedure isn't necessary since Win 8.1 should already contain pilots essential.
  From my point of view of the few, there could be a compatibility issue (maybe the SSD firmware update could solve that problem).

  What another SSD disk usage? You have the same problem with other SSDS from other manufacturers?

  Your comments would be appreciated.