Single Instance / PAO and Service availability of premises listener at the JRC

Similar Questions

• In disk management, it shows only a single hard drive and it's C, but it lists the size than what my old drive was that I took out

  I got a new hard drive in my computer and the old a subscribed.  I then had to reinstall Windows XP Pro.  In disk management, it shows only a single hard drive and it's C, but it lists the size than what my old drive was that I took out.  The new shows of unallocated hard disk without a drive letter and has a black bar above it. How do I show my new hard drive that is 1 TB instead of one that was a 250 GB is not yet in my computer.

  Hi Reta,

  ·         The drive appears like 250 GB even if it's a terabyte?

  ·         Is the remaining 750Go showing as unallocated disk space?

  If this is the case, you can refer to this article on how to use disk management in Windows XP:

  How to use disk management to configure dynamic disks in Windows XP

  You can follow the directions to extend a Simple Volume so that your 250 GB turns into a single terabyte.

• How to listen to your audio files, image by image and not only when you listen to the sequence? Help!

  When I edit audio I can't hear it when I play the edit, not when I use the arrows or an advance frame by frame. When I go frame-by-frame audio measures is not even appear on the screen on the right side of my calendar. What should do? I don't remember changing any connection there, but clearly I must have. Used to be very good. Tips for a poor sucker, at several levels? It is not a crisis, but it makes this process

  slow.

  Setting preferred.

  Audio while Scrubbing.

• single instance and RAC id 452056.1

  Please confirm the notes 452056.1
  Continuity of Oracle Applications Release 12 on exit 10 gr 2 - Single Instance database and RAC [ID 452056.1]
  
  This procedure: set up data guard on ebs R12 is for
  Single-instance RAC RAC database (data Guard) not only single instance on the single database.
  
  can someone please confirm.
  Thanks in advance.

  Hello

  Haven't you designate all these documents, only to those that are applicable.

  For RAC to cloning no CARS, please see (Note: 783188,1 - certified CARS for the E-Business Suite cloning scenarios). If you don't have a CAR on the source/target nodes, you don't need this document.

  There is something more that you can refer to see (R12 Data Guard with database 11g)--(Note: 1070033.1-Business Continuity for Oracle E-Business communiqué 12 utilisant Oracle 11g Physical Standby Database) for more details.

  Thank you
  Hussein

• Using two computers on a single monitor, keyboard and mouse.

  I want to use my two computers with a single screen, keyboard and mouse... says to use the kvm switch.  I use Windows XP on a computer and Windows Vista on the other... what kvm switch do you recommend?

  You can view the free software kvm solution below:

  Input Director
   http://www.InputDirector.com/

  I use between three computers (1-Win7 Pro x 64 single monitor, 1-WinXP Pro x 86 two monitors, 1-WinXP Home x 86 single monitor) and a single keyboard and mouse. It works fine for me, I used it for over a year without any problems. The Win7 Pro and WinXP Pro have both run several virtual machines too.

  There are several other kvm software available (Google is your friend) I tried several before input Director.

  Kind regards

• Maintenance and Service Guide

  HP Envy 17 - i7 2090nr 3D

  S/N: {removed privacy}

  M/N: LV045UA #ABA

  This discussion refers to the maintenance and Service of Guide (M & SG), not the user's Guide. The latter is delivered with the product while the former is located on the HP website.

  The SG & M I found on line was published in April 2010 and does not refer to the 3D features. In addition it does not refer to hard drives more than 1 TB, while my system came with a 1.5 TB hard drive. Finally, I think that my version of the HP Envy 17 3D has come on the market after April 2010 because the original system BIOS (F.07) in the system date was February 2011 (which I've since upgraded to the system BIOS F.15.)

  So is there an edition more recent (April 2010) as the SG & m for the HP Envy 17 - i7 2090nr 3D? And if there is, where can I find it?

  Thank you.

  Kind regards

  LMNUCOHEN

  Problem solved.

  LMNUCOHEN

• How to set up the single instance of data of high availability and disaster tolerance

  Hi Experts,

  I have unique database and instance need to configure for high availability and disaster tolerance

  What are the DR options available for synchronization of database at a remote site with a delay of 5 to 10 minutes.

  Application connects to the local site and DR site should be the remote site.

  1 oracle FailSafe with SAN?

  2. What is the security integrated on linux centos/oel solution?

  3. If the storage is on the San (for example) then is it possible to set up a shell script

  which detects if the source database is down for 5 minutes, ride the SAN stored the files of database on the remote computer and

  change the ip in the application, so it will never connect to the source ip address

  Thank you and best regards,

  IVW

  Hello

  Rupture can occur in any level

  1 oracle FailSafe with SAN?

  --> Do check if you have failure in storage, your security will do nothing to bring back data

  --> Seen failsafe, will be only the insurance when MS cluster moving the disc and services to different node, configured services starts.

  2. What is the security integrated on linux centos/oel solution?

  --> Under linux, you need to set the scripts to run, and you can check the option on the cluster OS

  3. If the storage is on the San (for example) then it is possible to configure a shell script that detects if data source is down for 5 minutes, mount SAN stored the files of database on the remote computer and

  change the ip in the application, so it will never connect to the source ip address

  --> This you will get a cluster of BONES...

  Points to note:

  ================

  --> If there is power failure sudden, we can expect there may be lost writing in your data block, which will bring the inconsistency to your data file and redo

  --> Here, there is problem with your drive?

  --> If there is problem with your complete domain controller (how will you mount FS to a remote server?)

  Note what we are discussing was HA and you try to keep an idle server all the time (you have a server with more RAM & CPU)

  Why you can't check an option of CARS, can also have the cluster extension...

  And to avoid the loss of data and to meet the RPO and RTO in all time (same DC came down, storage failure, server crash), you may need to use Oracle data guard...

  Ask questions if you have

  Thank you

• DEV and quality assurance within the oracle single instance

  We have our DEV and QA in a single instance of oracle. Scripts that refer to table in DEV names will be copied on to QA DEV quality assurance tests for unit tests at the end. DEV, extract us data from 5 source systems, one for each State of the United States, which use the same application, so the names of the source tables are identical, and so in our staging area we have a scheme by the State such as TX, GA, MD and we extract data in tables that are identical to the staging tables. As cross us the aggregation state our scripts should refer to TX.employee and GA.employee in the same sql statement.
  
  What is the best design for this using SCHEMAS, DATABASES VIRTUAL PRIVATE, VIEWS, SYNONYMS etc.?
  
  
  
  
  
  Thank you in anticipation
  
  Published by: user4900730 on March 22, 2011 14:53

  user4900730 wrote:
  Just for my knowledge, if I found myself in this situation of VIRTUAL PRIVATE databases would make sense here?

  I guess that you could possibly use VPD. But it would create major problems if you have always wanted to make schema changes - you could not add a new column to a table in DEV, for example, without this column is also available in AQ. You could not have code in DEV that does not exist in QA. I guess you could really get fancy and use g 11 edition redefinition to have an edition of dev and qa edition but I wouldn't think how to promote prod code in this kind of environment. In addition, editions is a characteristic of the company (at least, I'm not sure if it is an extra cost option) which would tend to be beyond the solvency of the company trying to save on licensing costs by combining dev & qa in a single server non - VM (and even less in the same instance).

  You may have your application use any dynamic SQL so that dev could use the DEV_TX while QA scheme used the QA_TEX schema and it was only the schema of TX in prod, but that obviously never gets old very quickly. You can create a single set of synonyms the synonym TX_FOO points to DEV_TX. FOO for users of dev and TEST_TX. FOO for test users, but then you will have to remove qualifiers to schema of all your SQL queries.

  In short, an application like you describe trying to share an instance would be a pretty massive undertaking.

  Justin

• Configuring multiple services in a single instance database

  Dear all,
  
  I would like to create names from multiple services for a single instance oracle database (10.2.0.3 on IBM - AIX 6.1). I tried to search on the net, read the documentation, as well as on the metalink but couldn't find something relevant to the single instance database.
  
  Say I have two users, userA and UserB, for which I would like to use the two services (ServA and ServB) to connect to the same database to single instance.
  
  Any help in this direction is appreciated.
  
  Concerning

  ALTER system set service_name = 'ServA, ServB. '

  in your tnsnames.ora to designate either service_name = "ServA" or service_name = 'ServB.

  It is very difficult to believe that you can't find this in the documentation, and my suspicion is that you it didn't look at all.

  -----------------
  Sybrand Bakker
  Senior Oracle DBA

• How to make a single instance of the application regardless of the main application and the other entry point for the application

  Hello experts,

  I explain the sceniro of my application. My request is mainly a time system as well as some other features related businesses. My app has a landing screen which is actually a custom made calendar that accumulates information captured time. There is also a time where entry screen user at will has worked time and other related information. The user has the option to run the application manually at the entrance of the time and see the reports and there the event listener to follow the events of call/SMS/e-mail that invokes the application automatically and user to the scree of time entry.

  Problem one: I used headphones to follow the events of call/SMS/e-mail. When an event is called, alternet point of entry of the application the application is running. Application then get calls time, contact information etc. and push my entry screen with pre-filled information time.

  As such, it works very well, as expected, but the problem is the number of instence that he is creating. Each track event creates a new instance of the application. I want to keep only one instance.

  Two problems: to solve this problem, I removed the other point of entry and RuntimeStore to keep the running instance of my application. This instance of the application in a way keeps in singletone as such when the listener calls the application it finds that the application is running in the background. Then she moves the application to the foreground. It works very well, I mean the application user interface called on the foreground, but he won't have to time entry screen automatically as I hope. The block of code is as follows,

  public static final long applicationID =0x8ddc44508679bd5bL;
  static NSIApplication NSIInstance=null;
  RuntimeStore runtimeStore = RuntimeStore.getRuntimeStore();
  
  if (NSIInstance != null)
              {
                  NSIInstance.requestForeground();
              }
              else
              {
                  synchronized (runtimeStore)
                  {
                      NSIInstance = (NSIApplication)runtimeStore.get(applicationID);
                                          //listener initialization
                      NSIListener.Initialze();
                  }
  
                  if (NSIInstance != null)
                  {                   NSIInstance.requestForeground();
                                      //event's info manipulation and push the time entry screen                                     NSIInstance.RUN_NSIApplication();
                  }
                  else
                  {
                      NSIInstance=NSIApplication.getInstance();
                      NSIInstance.RUN_NSIApplication();
  
                      synchronized(runtimeStore)
                      {
                          runtimeStore.put(applicationID, NSIInstance);
                      }
  
                      NSIInstance.enterEventDispatcher();
                  }
              }
  

  I expect a guideline to follow so that I can reach the expected my workflow. Thanks in advance

  I can't propose to use the runtimestore to store instances of the application, as it was used on an example RIM, he has never worked for me.

  I suggest to use a single point of entry and the automated screen using a global event or status in the runtimestore.

• ORA-01078 and LRM-00109 after I installed a single instance of 12 c

  Hello

  I configured a database with dbca as single instance on a server Linux with Oracle GI 12.1.0.2 6 Oracle and Oracle DB 12.1.0.2 with power supply of January 2015. So not CBD or so. Installation runs without any problem.

  After Installation I wanted to start the db, but it gives me a

  SQL > startup

  ORA-01078: failure in the treatment of system settings

  LRM-00109: could not open the parameter file ' / usr/local/oracle/product/12.1.0.2/dbs/initmyhr12D.ora'

  SQL > exit

  So I looked for it in the directory. I found the file, but it was created with big letters:

  ora121@testserv-DB_12_1_0_2/myhr12D:/usr/local/Oracle/product/12.1.0.2/DBS

  He's $

  -rw - r - 1 ora121 oinstall 48 9 February 14:36 initMYHR12D.ora

  -rw - r - 1 ora121 asmadmin 24 9 February 14:19 lkMYHR12D

  -rw - r - 1 ora121 oinstall 7680 9 February 14:35 orapwMYHR12D

  It's funny! I know, I just ove, but is - it an official bug in 12.1.0.2, when I create a database and gives the SID in large letters the dbca creates the file init.ora with big letters but tries to load it with small letters? Not very well I think...

  A big thank you and best regards,

  Dave

  Oracle sid in Capital letter as set below:

  export ORACLE_SID =MYHR12D (capital letters)

  and give it a go...

  If this does not work, please copy - paste the output of the following command:

  $env | grep ORACLE

  HTH,

  Pradeep

• Running the Single Instance and RAC on the same server of different homes.

  Hi guys,.

  I already have 4 node RAC12c installed on OLE 6.

  I'm planing on some of my other 12 single instance databases on other migration for RAC nodes.

  Please correct me here if I am wrong...

  My understanding is that, to be able to use DBCA or rconfig for conversion of database instance RAC, the only instance and RAC cluster must run on the same server or machine node.

  Thanks to this understanding... Am planing on the installation of a binary single instance on one of my cluster node node1 say and then use RMAN to duplicate the single instance or just an RMAN restore from the node of the instance that is unique to this node1. Am capable of this plan must then use DBCA or rconfig to convert the CARS database.

  Now, my question is can I run a single instance and RAC on the same server for different homes with different database ports?

  2. for these unique instance that runs on the server RAC 1 node, can I use the RAC database listener that runs from the House of the grid or I have to create another auditor?

  Thank you in advance and also let me know if I can use DBCA or rconfig when the only instance and rac database are on separate nodes.

  K

  Fix. And that's what I would normally do. In general, I would have just an ORACLE_HOME directory that can be used by the punctual and RAC databases at the same time.

  See you soon,.
  Brian

• I use Photoshop elements on Windows 8.1 12.  When I go in the Expert Mode to change the available toolbar is displayed in a single column and missing several tools which foreground and background color.  How to restore the original toolbar?

  I use Photoshop elements on Windows 8.1 12.  When I go in the Expert Mode to change the available toolbar is displayed in a single column and missing several tools which foreground and background color.  How to restore the original toolbar?

  Try to re - set preferences.

  Go to: Edit > preferences > general (menu Photoshop Elements on Mac)

  Click on the button Reset preferences on the next launch

• Primary database is RAC and physical intelligence is the single instance

  Hi all
  
  I use Oracle RAC 11.2.0.3 as primary database, we will begin to use the Oracle Data Guard.
  I am designing my infrastructure and planing to use single instance Oracle 11.2.0.3 my stand physical database.
  
  My question is it possible to have my sleep as single instance database while the primary is RAC?
  is it possible to build my Oracle database single instance ensures from the primary database to the RAC, RMAN backup?
  Are there restrictions (or all of the points to consider) as my primary database is CARS while the physics of Eve is the only Oracle instance?
  
  in the link below
  [http://docs.oracle.com/cd/B28359_01/server.111/b28294/concepts.htm#i1039416]
  It was mentioned that primary can be CARS or simple and even the day before, but my question is possible to have primary as CARS all on standby as single instance? or it should be like each other?
  

  The primary database can be either a single-instance Oracle database or an Oracle Real Application Clusters (RAC) database.
  Similar to a primary database, a standby database can be either a single-instance Oracle database or an Oracle RAC database.

  Kind regards

  http://docs.Oracle.com/CD/B28359_01/server.111/b28294/rac_support.htm

• On RAC primary DB and a single Instance as physical Standby...

  It's my 11g Data Guard scenario:
  
  BECAUSE primary database 11g.
  
  Single Instance Oracle 11g.
  
  My first question is:
  
  If each node of the RAC has 3 online redo log, should I create 4 or 7 journal watch over the database pending?
  
  If restore database Standby long after the day I do full backup and I've got ti registry manually archived newspapers, what I do for a node of the RAC archived logs of the two?
  
  Thank you very much.

  In form 7
  You must register for both nodes. Remember that you have a LGWR instance, so a redolog thread instance and the two wires together are all changes to the database.
  Please make sure that in this configuration of the archived redo logs are on a shared disk.

  ----------
  Sybrand Bakker
  Senior Oracle DBA