Sinusoidal linear encoders Heidenhain 11 (micro) App and USB-6009

Similar Questions

• Help DAQmx and USB 6009

  
  

  I had a look at your VI and found a few things:

  Reference leaks - if you "Throw" EXE"set to true, you launch an executable every 100ms and creating a process .NET oppose every 100ms. You must close these references otherwise your application will proceed in memory.

  In your VI Leitor, you're constantly read/write a file on the drive - just open the file outside of the loop, write data inside the loop lines and then close the file outside the loop. If you need to start a new file, you can close/open a new file when you need inside the loop. Generally, it is best to file i/o outside of the loop of data acquisition - you should look at the architecture of producer/consumer for how to do this.

  You also keep the picture of data in memory, which means that more your application runs, it will use more memory and this causes the slowdown.

  You use a lot of Boolean read/write property nodes and update your cards - it is generally considered bad practice and you should look appropriate methods for communication between the screws (for example, events, queues and registrants).

• Problem of analog sinusoidal input USB-6009

  Hello

  I am a newbie to Labview. I'm using Labview 2009 and USB-6009. I tried to use USB-6009 to display the input sinewave of function generator signal. First of all, the perfect sinusoidal looking at the frequency of 1 kHz, but when I changed the frequency of 10 kHz, the sinusoid turned into a triangle wave. When I test the input signal, I put the 48 kHz sampling and Terminal configuration is CSR. Is there a problem with USB-6009?

  You really need to spend some time to study sampling and Nyquist theorem-not LabVIEW. To faithfully reproduce the shape of the sine wave, you must go to a sampling rate 10 times higher than your input frequency. With the 6009, i.e. limit the entry less than 5 kHz.

• the micro-apps widget failed

  Hello
  I think it is since the update of the pacifier in vain the apps widget in micro apps change. I reset the phone without success.
  You have an idea?
  Thank you

  @phil4

  Start the safe mode and to report

  http://talk.sonymobile.com/T5/FAQ/How-to-boot-your-phone-into-safe-mode/m-p/348008#U348008

• Are there any quick replay of the notification Center of whatsapp and messenger on ios10 apps and sms messages?

  Are there any quick replay of the notification Center of whatsapp and messenger on ios10 apps and sms messages?

  See if this information from the iPhone user Guide helps. http://help.Apple.com/iPhone/10/#/iph6534c01bc

• I downloaded an application from my iphone and then deleted. Now when I open AppStore I purchased apps and its still there. How can I remove it from there though even I have no more app?

  I downloaded an application from my iphone and then deleted. Now when I open AppStore I purchased apps and its still there. How can I remove it from there even if I have no more app?

  The applications that you have downloaded will be available for re - download also a practice.

  Apps y cannot be removed, you can hide only.

  Read here: hide and expose the purchases made on the iBooks Store - Apple Support, App Store or iTunes Store

• How can I remove icons Google Apps and Google search page AFTER 41 of Firefox Update Options?

  Before my recent upgrade to Firefox 41, while using Google search in the search bar, Google Apps and Options icons were not on the search page. After the upgrade to Firefox 41, two icons appear. How can I remove them?

  You can get Google results through two other sites, with an accent like the privacy. You can judge if you like better the layout:

  • https://Startpage.com/
  • https://search.disconnect.me/

  I do not use those regularly myself, so I don't know exactly what the differences would be.

• How we can plan automatic updates app and icloud backup at a specific time and off-peak hours?

  How we can plan automatic updates app and icloud backup at a specific time and off-peak hours?

  It does not work like that. It cannot be scheduled for a specific time.

• Messages.app and Facetime.app do not open after OSx updated 10.11.5 Mountain Lion

  Last night, I've updated my Macbook Pro in early 2011 at the El Capitan 10.11.5 Cougar (Yes, the leap). Open all apps to check out them, and Facetime.app and Messages.app are not open.

  FaceTime.app gives the message "an internal FaceTime error has occurred. There was a problem with Facetime. You must exit and reopen Facetime. "A few times. No change.

  Messages.app: Last night after update, I opened it and gives the message "Messages is updated... The database of Messages is in the process of modernization, please wait until it is finished or Messages Quit and restart it later. "Allowed to do that during the night (about 7 hours). App reopened this morning and nothing went up, no new window, no error message, no light 'walk' on the dock; but, if you click on it showed the "Application does not message." After a few re-openings, it's the message even 'Messages is updated"as above.

  I have not tried anything other than a restart.

  Any ideas on what to try? Thank you in advance!

  create a new administrative account, start to this account and see if open programs.

  otherwise, open the Console.app (from projector to type "console" without the quotation marks)

  clear the console log (clear view)

  Launch the application

  Paste the result to the console in this thread for analysis.

• Server.app and port 4444

  I was checking my open ports on my Mac server recently and noticed that the port 4444 was open. (To my knowledge) I have not all installed services using this port, so I was a little confused. All that is using this port runs under launchd so I can't kill him directly. When connecting to this port on telnet it returns an HTTP 405 error. As a test, I uninstalled Server.app temporarily and when I checked my ports once again, he was more open. What is Server.app uses this port to?

  Thank you

  This port must be accessible from the server itself on localhost.  It is the process of krb524 (translator of Kerberos 5 to 4) and is used with Directory Services.  With installed Server.app and services that are running, it's a normal service.  but as mentioned, he must answer only when he is interviewed by localhost.  If you do a port scan or telnet from another machine on your local network, the service should not respond.

  Reid

  Apple Consultants Network

  Author - "El Capitan Server - Foundation Services.

  Author - "El Capitan Server - Collaboration & control»

  Author - "El Capitan Server - Advanced Services '.

  : IBooks exclusively available in Apple store

• iPhone 4S new app and hotspot?

  request for information about the new app and hotspot on 4S using iOS 9.3.2

  And what exactly you want to know about them?

  You can ask a real question if you want to help.

• The stocks app and widget is missing from my iphone6. If I drag from left and the stocks type I see, but it does not appear as an application on any of my screens. How to get him back?

  The stocks app and widget disappeared from my iPhone 6 more screen. I can access hitting swipe to the left and tapping stocks, though. How do I bring as a widget on my home screen?

  Harry1225 wrote:

  The stocks app and widget disappeared from my iPhone 6 more screen. I can access hitting swipe to the left and tapping stocks, though. How do I bring as a widget on my home screen?

  I guess the stock app is the built-in app comes with the phone if so it cannot be deleted.

  First glance at your home screen or app folders.

  Check the restrictions.

  If all else fails - settings - General - reset - Reset available to the home screen.

• Is there a way to stop the countdown rehearsal before she goes off without open the alarm app and turning works?

  Is there a way to stop the countdown rehearsal before she goes off without open the alarm app and turning works? Basically, if I'm ready to get up and there are 4 minutes remaining on the countdown of repetition which is the fastest way to 'Cancel' the snooze and alarm?

  There isn't a way, I discovered that allows me to do without invoking the alarm and the alarm clearing application

• Apps that worked perfectly well today are grayed out now when I connected to wifi and I can't delete the app and it just says: 'pending' Please help

  HI so I recently did a restore from my old iPhone to a new 5s 5s.

  on this operation, I had to install all my apps again as usual, I did this on the wifi and then had to leave my place and obviously they can not download correctly. Once all applications have been downloaded perfectly well, today my application was grey and when I typed on it, it says waiting?

  on further inspection I went to my app store and tried the app said see if I could redownload the app and he just said 'open' and when I click on open it did nothing.

  I also tried to remove the application and I can not.

  Please advise on what to do as this application contains important information and I need it urgent.

  Kind regards

  William

  It would seem that you have an app or two 'stuck' in the download phase

  There are two ways to deal with this - they are summarized in this thread

  Download apps stuck on waiting...

• Is it possible to restore an iPhone on a previous backup?  My phone was stolen 2 weeks ago and took me off but the thief has changed a lot of my apps and things.  I just want to know whether and how to restore them from before flight

  Is it possible to restore an iPhone on a previous backup?  My phone was stolen 2 weeks ago and took me off but the thief has changed a lot of my apps and things.  I just want to know whether and how to restore them from before flight

  How the thief has changed a lot?

  You do not have a password, find my iPhone ON?

  Read here for the restoration of the backup: http://support.apple.com/en-us/HT201252